SD / Third Party Sales / 2 line items in PR for one line item in Sales orde

Hi
In a third party scenario, I have item category TAS .When I create a sales order, there are 2 Schedule lines for the item. The first SL has confirmed qnty as 0 and the second SL has confirmed qnty as full quantity ( say50). When I save the sales order, it creates a PR as expected. However the PR has 2 line items for this single line item of SO. Each PR line items have the same quantity, in this case 50. Why is this happening. Is it due to some configuration.
All my SD configurations are fine for third party process. Please let me know if somebody faced this situation and solved it.
In crux, one line item in third party process leads to 2line items in PR , each with the quantity as mentioned in teh confirmed schedule line.

Yes interesting to see multiple scheudle lines during TAS processing.
Also please check the scehdule line category. Should be CS. Also check the MRP type in your material.
CS should have Order Type = NB , Item category = 5, Acct Assign Category = 5, incompletion = 31. Rest all fields should be blank or unchecked.
Pur Requisition will be based on the scehdule lines. Since there are 2 schedule lines, you have two line items in the purchase requisition. If you can fix the multiple schedule lines problem in your order, then your requisition looks good.
Please check note 210417 reg av chk for TAS.
Regards
Sai

Similar Messages

One PR for one line item in third party sales

Hi all,
When we create and save a third pary sales order, the system will create a Purchase Requesition.
If there are 5 line items in the Sales Order, the system will create only one PR for all the line items.
I will create only one sales order, and I want one PR for one line item of the sales order.
How to Configure this.
Regards
VASU

Vasu,
PR in the sales order is generated by the settings in Schedule line and Item category. In a particular sales order, if there are 5 line items and of same item category and schedule line then system will give only one PR number. Again if the item category ans schedule line is different then there will be multiple PRs.
Can you please elaborate more on your requirement. Again from one PR you can generate multiple PO
Thanks,
Raja

Difference in amount in sales order and billing for one line item

Hi experts,
User created one sales order with three line items say line item10, line item20
Line item 30.Line item 10 value is 5024.26 EUR in sales order. He did delivery for three line item and invoiced. But the problem is that the line item 10 value is changed i.e. 5024.28 EUR in Billing and the remaining line item values are correct. All the line items having same item category.
I asked the user to cancel the invoice and PGI. He did that. And again he created the PGI and Invoice. But the value of line item 10 become 5024.27 EUR and again he cancels the invoice and the PGI. and again he created the PGI and Invoice. Now the value of line item 10 is correct i.e. 5024.26EUR in invoice.
Note: No changes are carried out from sales order to billing and even in material also.
I checked copy control settings also all are correct.

Is the Item Category of that item different from the rest. If yes for that item probably pricing is redetermined. However if its the same somebody might have changed it manually.
If all the item have same category then it is possible that repricing is carried out for all the items however it found new condition record only for that perticular item.
Rings a bell ?
Regars

Amount Difference in sales order and billing for one line item

Hi experts,
User created one sales order with three line items say line item10, line item20
Line item 30.Line item 10 value is 5024.26 EUR in sales order. He did delivery for three line item and invoiced. But the problem is that the line item 10 value is changed i.e. 5024.28 EUR in Billing and the remaining line item values are correct. All the line items having same item category.
I asked the user to cancel the invoice and PGI. He did that. And again he created the PGI and Invoice. But the value of line item 10 become 5024.27 EUR and again he cancels the invoice and the PGI. and again he created the PGI and Invoice. Now the value of line item 10 is correct i.e. 5024.26EUR in invoice.
Note: No changes are carried out from sales order to billing and even in material also.
I checked copy control settings also all are correct.

Hi
I think this is standard SAP issue of rounding the condition records at item level. Can you please share the netvalue for all the three items and the header net value at sales order and invoice level.
kind regards
sandeep

How to trigger Condition Access sequence multiple times for one line item?

Hi,
We have a situation that, User will enter a Promo code (custom Field) in Sales order Header Additional data B tab to apply discount for line items.
Logic goes like this:
1. For each Promo code .. there may be multiple sale deals (Max 3 at this point).
2. For each line item (refering to tkomp table) we have to apply the sale deals (found above) the Condition access sequence will pick the right sale deal to apply the line item.
3.we have enhanced the tkomp structure to hold the sale deal.
Challenge:
As we have the standard logic to trigger the condition access sequence once for each line item, how we can apply 3 sale deals for single line item. Is there any logic or way to trigger the condition access sequence multiple times for single line item with diffrent sale deals. ~ There may be one valid sale deal for one line.
Functional team maintained diffrent access tables in the access sequence!!!
Fnds, please help me to get some clue
Thanks,
Sunil Y

Hi Eduardo , Thanks for the response.
I am trying to explain again, this is the requirment given by the functional guys.
we have Promo code in Hearder Addtional data B tab --> Have to retrieve Sale Deals -->
At this point of time we may have at max 3 Sale Deals. we don't know which sale deal is vallied for which item we have in TKOMP. We have enhanced the TKOMP structure to hold one sale deal only (ZZPROMO).
We have enhanced USEREXIT_PRICING_PREPARE_TKOMP in RV60AFZZ to populate the value in TKOMP. Then it will go for diffrent access sequence to find the proper condition.
Our challenge is that, for each line item we have 3 sale deals, we don't know which one is valid for which line. but we have to apply the vallied sale Deal to the line items. Line item 10 may have Sale Deal 2 , item 20 may have Sale Deal3 and 30 may have sale deal 1.
We may have solution, by fixing some thing in the code or through config. But i am confused that is it a valid requirment?
Please help me ...
Thanks,
Sunil Y

How can i show item schedule line details in Tableview for each line item

Hai all,
I need to display schedule line details in Tableview for each line item.for example in each row i need to put one column along with button , if i click on this table that row should be expand vertically and must show all schedule line details in that.if i click my button again the visible expanded row should disappear...
if anybody works on this previously plz send some sample code...
leoiz....

To modify rows the best way is with the Iterator (do a search in the weblogs for "Iterator")
However for what you want to do I've only seen this really work successfully with a standard HTML table not using the tableView.

I have Mac Pro 2007, which have no bluetooth hardware. What should I do to use Apple wireless keyboard and magic mouse??? Can 'third party's internal bluetooth card' be used for this purpose? Help please...

I have Mac Pro 2007, which have no bluetooth hardware. What should I do to use Apple wireless keyboard and magic mouse??? Can 'third party's internal bluetooth card' be used for this purpose? Help me please...

You can find the Apple Bluetooth card on eBay for as little ten dollars (says its for the 2008 model Mac Pro, not sure about the 2007).
http://www.ebay.com/itm/Bluetooth-Board-iMac-and-Mac-Pro-922-8233-922-8233-/1208 49278570
Here is a link to a full explanation of the card and how to install it. Part numbers may differ a bit as that is an old article and newer models have come out.
http://www.xlr8yourmac.com/systems/Mac_Pro/Bluetooth_MacPro_install/Bluetooth_Ma cPro_install.html
Just make sure that the part will work in your model Mac Pro. To that end, you may be better off avoiding eBay and going to a parts reseller. There are even third party cards that use the internal Apple bluetooth slot.
http://fastmac.com/bluetooth.php
In theory, using a USB or PCI card will work at login so long as it is recognized by Apples drivers. You say you need to launch an application to use your current USB Bluetooth dongle? If it is not controlled by the Bluetooth icon in the menu bar then it must be using a third party driver of some sort. Unfortunately, I don't know off hand which USB and PCI cards are supported.

Are there any good third party or otherwise apps and/or plugins for imovie'11?

Are there any good third party or otherwise apps and/or plugins for imovie'11?

Re: Plugins for iMovie 11
Someone just asked this question yesterday. So I am cutting and pasting the answer From Bengt Warleby
Hi
You can not.
Nor to iMovie'08 or 09 or 11 - They do not accept any Plug-ins.
How about FinalCut Pro X - I don't know but i regard to Apple way of progress - I doubt
For iMovie up to HD6 and FinalCut Express and FinalCut Pro up to 7.0 - there are plenty.
Yours Bengt W

How do I create 2 motion tweens for one line of text? the text needs to "fly-in-right", I can do that,

how do I create 2 motion tweens for one line of text? the text needs to "fly-in-right", I can do that, then it needs to "fly-out-bottom" again, I can do that, but not on the same line of text...any ideas...

my question
1- there is any way to assign the Fetch process to specific region so the process take all item in these region only.
2- how can create manual process to fetch row into specific items in page ( i tray these code
SELECT col1, col2, col3 ....
INTO :P1_ITEM1, :P1_ITEM, :P1_ITEM...
FROM table
WHERE id = :P_id ) but no data retrieve .
I do not think that it is possible to have more than one Automated Row Fetch process in a given page. See the thread:
ORA-01403: no data found : Unable to fetch row multiple automated row fetch
On your second question, the manual process should work provided:
P_ID has a value when the process executes. You can do it this way:
i. Make this process as a on-load After/Before header process
ii. Make sure that P_ID page item has value when the process executes (set it from another page or before the pl/sql process executes)

Display of icons in the items of dropdownListBox for a single item

Dear BSP Gurus,
Do you know if it is possible to display icons in the items of dropdownListBox for every single item?
To assign and display icon to buttons I do:
    lv_image->id = 'UserSelectionCancel2'.
    lv_image->src = '/sap/public/bc/icons/s_B_OKYE.gif'.
    lv_image->tooltip = ''.
    clear lv_image_string.
    lv_image_string = lv_image->IF_BSP_BEE~RENDER_TO_STRING( page_context ).
              %>
              <xhtmlb:toolbarButton id      = "<%= ywfx1_b_bcontinueWF %>"
                                    design = "STANDARD"
                                    text    = "<%= lv_image_string %> <%= otr(YWF11/ContWF) %>"
But I could not managed to do it for the " <htmlb:dropdownListBox ...".
We have application developed in ABAP WebDynpro and there it is possible, so I want to do exactly the same with BSP.
Any idea?
Thanks in advance,
Valentin

Hallo Alexandre,
But what if I use table for defining the items?
Like:
htmlb:dropdownListBox id = "DropDownCommands"
                  table             = "<%= application->mt_commands %>"
                  nameOfKeyColumn   = "VAL_COMMAND".."
Where "application->mt_commands" is table of strings?
Would it be some how possible?
Regards,
Valentin

No purchase order item was generated for shipment cost item

Hi Gurus,
When I am creating with reference to shipment no & shipment cost type, When I save the shipment cost, See the logs at the time saving.
The logs are showing in red :
No purchase order item was generated for shipment cost item.
Message no. VY633
Please enter a valid partner role.
Message no. ME351
May I know the reason for showing red logs at the time of saving. (When I check logs, it is showing red colors).
Please advice if I miss any thing.
Regards
Rakesh

Hi Rakesh,
Your customising is incomplete. Notes 506605 & 940532 will help you on this.
regards, david

SPA525G permanent CLIR for one line

Hello,
how is it possible for one line (not for all) to set up a permanent suppression of the Caller ID. I can not find it in the settings. I can find only the suppression of all line.
Who can help me?
regards
Daniel

Hi,
thanks for the reply. Does not seem to work. In the PBX (AVM FritzBox) , I can not suppress the phone number for this line. If I use the code *31# or #31# on the SPA525, it tells me unknown number. On ISDN or DECT terminal it works. Note If the unknown number from the SPA525 or the PBX?
Sorry for the bad English!
greeting

Title/text effects just for one line?

Hi!
As far as I understood do the PE11 title/text effects work just for one line of text.
(1) How can I produce more lines text-effects with PE11 (and more complex, like 3D-animations)?
(2) If this is not possible, do you know any free/beginners software for doing that?
I look forward to reading your answers!
Best wishes,
Ronald

Ronald,
You are most welcome.
I am not sure what the limitation to one line of text is related to - the program coding? The animation algorithms? However, with a bit of planning, there are several ways around that limitation, but it throws people, when they first encounter it.
This article also has some tips on using Titler in Premiere (both Pro and Elements), and I have added some Adobe TV tutorials. Note: they are done in PrPro, so the interfaces will look differently, plus PrPro's Titler has some additional functions, that are not yet in PrE. Still, the basics are all the same, and I think that with a bit of interpolation, even the PrPro tutorials will be useful: http://forums.adobe.com/thread/1131177
Good luck, and happy titling,
Hunt

Third Party Sales order related Purchase requisition Kicking twice one line

Hi,
Purchase requisiotn related with Third Party Scenario kicking Twice one line item, The same line item is appearing one time in Sales Order but when we check Purchase requisition it is showing twice.
Example
S.O
Item 10            QTY                 Plant
XYZ                100 pcs             1100
after saving sales order Purchase requisition generates automatically. When we check Purchase requisition its showing like
PR#
Item 10          QTY                     Plant
XYZ               100 PCS                1100
Item 20          QTY                     Plant
XYZ               100 PCS                1100
When we check purchase requisition in Sales Order Schedule line item reference it shows PR number with line item 20.
Please help me out on this issue. We are unable to replicate this on quality client.
Thanks,
Naveen....

Hi
The account assignment category X has been maintained in
schedule line category CS and it is recommended by SAP
Yes perfectly right
SAP recommends only X as account assignment category for CS
If the PR is created successfully then there is no problem with related to SD configurations
The error message is more of an MM error
You need to check with an MM expert why that happens while creating PO from PR
I feel since this happns while saving the transaction there might be some userexit used which may be root cause
System error (error in method PO_CHECK)
Message no. ME816
As per my knowledge this is not a standard error
Because of activation of some userexit this is triggered
Functionally this is a MM area error
From SD side everything is correct
Regards
Raja

Different value in sales order and billing document for one line item

Hi Experts,
User created a sales order with three line items say line item 10, line item 20, line30 and he did the delivery and billing also. Line item 10 value is 5024.26 EUR in Sales order
At the time of billing the value of a line item 10 is increased by 0.02 i.e. 5024.28
I asked the user cancel that invoice and the post goods issue. He cancelled the invoice and post goods issue. Then he created the PGI and billing now the value of line item decrease by 0.01(5024.27) again he cancelled the invoice and post goods issue. he created the post goods issue and billing. Now the value is correct i.e. 5024.26.
User is asking me the reason can any one help me in this
Note: price is copying from delivery to billing

Morning Sunina
Now consider this scenario
Item a - 10
Item b - 20
Item c - 30
and the validity of condition rec for item C is 31st of Jan
after 31st JAN the record changes or there isn't any.
In Copy control the pricing type is 'B' i.e., carry out new pricing.
Now if the document is created in January it will take all the above prices. and this document is then billed in Feb. Now the copycontrol, whilst copying the prices, will predetermine the same.
Now your task is to check if there was user intervention, check the pricing in order and check what condition types got affected in order and in billing.
If your scenario is still not amongst the above cases...
I don't know what to do, if you figure out please let us also know, god know when we would face the same scenario....
Take care

SD / Third Party Sales / 2 line items in PR for one line item in Sales orde

Similar Messages

Maybe you are looking for