SD TV screen does not "fill" entirely

I just got another "HD-DVR" box and I cannot setup my SD tv with the HDMI cable with the new box.  I had the settings all set before, but I can't get them now.  It's either a black box around the picture, or above & below, or on the left & right.  Can anyone give me the correct ratios to use?  Thanks!!!

An SD TV wouldn't even have an HDMI input.

Similar Messages

  • TS4085 the image does not fill entire screen of iPad, therefore not the entire TV screen.  Why?

    When I try to mirror a video from my iPad to TV using Apple TV, the video does not fill entire screen of iPad nor the entire screen of my TV,  Is there a way to strech the image to fit screen(s)?

    Welcome to the Apple Community.
    There are two factors in play here. Firstly the iPad screen is 4:3, your TV is 16:9, so when mirroring the mirrored iPad screen is never going to fill the TV screen. If on top of that, whatever you are watching doesn't fill the iPad screen then that too will be reflected in what is seen in the mirrored image.
    You cannot stretch this using the Apple TV or iPad controls, but your TV may have a setting you can use. Generally speaking though this will distort the image and you would likely be best leaving it alone.

  • Screen does not fill up whole monitor, windows 7 on mac mini

    Hi guys,
    I just installed Windows 7 (32bit) on the new mac Mini (Lion OS) via Bootcamp 4.0. I installed the windows driver after the Windows 7 registration.
    When Windowsd 7 starts, I can see that the screen does not fill out the whole 22" monitor, leaving a half-inch black frame.
    The monitor is a LG IPS225 connected with HDMI to my mac Mini. Booting in mac OS Lion gives me a nice fully stretched screen.
    If I understood it correctly, the graphic card (AMD HD 6750M) is somehow "underscanning" the monitor. Downloading the graphic card application from AMD (Catalyst mobility) does not help, as I get an error message saying that it's wrong adapter.
    I have installed all the Windows 7 updates and Apple software updates, well running the update programs says that my computer is up to date...
    Anyone got the same problem? or have an idea I can try?

    If in device manager, your monitor is defaulting to Plug and Play, you should update with LG driver files for that monitor. My LG Flatron W2753V came with a CD that included the Monitor Driver (.icm, .cat and .inf files).
    If Plug and Play, right click monitor in Device Manager, selecting Update driver software, pointing it to where you have the Monitor Driver files - see pic. 
    If you don't have driver, you can search for it, get it from here at LG,
    http://www.lg.com/ca_en/common/search/controller.jsp?No=15&D=LG%20Flatron&sid=13 5A4A76F710&Ntt=LG%20Flatron&Dx=mode+matchallpartial&Ntk=All&Ntx=mode+matchallpar tial&N=8110&srchLocalCode=ca_en&Nty=1
    LG Flatron IPS225 monitor?
    http://answers.yahoo.com/question/index?qid=20120208062108AACSxdA

  • Macbook Air connected to External Monitor does not fill entire screen

    Hello All!
    I am having a bit of trouble. I recently purchased a MacBook Air for work, and I bought a Samsung moniter to go connect the Air to when I am in the office. However, when I connect the Air to my moniter the enitre screen doesn't fill up (please see attached pic). Can anyone help?
    Much Thanks!

    UPDATE: I just came back after a visit to the apple service provider here in New Delhi. They have replaced the logic board on my macbook pro and guess what? the situation is still the same. No difference what so ever as far as the screen resolution is concerned. I can still see those black bars in the exact same places i.e. the right hand side as well as on the top of the screen. Even the size of the black bars are still the same.
    I am so upset right now. After trying my best in order to solve this problem I went to the AASP with high hopes. I was very confident that after replacing the logic board this annoying problem would go away but unfortunately that's not the case. Even the Apple Engineer was clueless on how to solve this problem.
    I think I'll call apple care and speak to the customer relations regarding a replacement.
    If any of you can come up with a solution to this problem please let me know.
    I'm all ears!!!

  • Native resolution does not fill entire external display

    I've got one of the original MacBook Pros with the Mobility Radeon X1600 hooked up to a Samsung P2350G display (it's a 23" LCD panel.) The native resolution on the display is 1920x1080.
    The display has inputs for both VGA and DVI. The DVI port however is used by a desktop PC already, so I use a DVI to VGA adapter on the MacBook Pro, and use the laptop panel as a secondary display.
    The problem is that when I set the external display to its native resolution, I get vertical letterboxing and some flickering along the edges of the image. It does not horizontally fill the whole display as it should. I have tried the same adapter on the PC and it worked fine (though with rather spotty image quality.)
    Resolutions that are lower than 1920x1080 work fine and fill the whole display properly. I'm not exactly sure what the issue is. The laptop is only semipermanently attached to the large display so I can live with a reduced image quality there, but the flickering, slightly distorted image is just not acceptable right now.

    Sounds like it might be a sync issue. Have you tried powering the monitor off and then back on with the MBP connected to it? How about just temporarily disconnecting the DVI cable from the desktop PC and using that to plug into the MBP.

  • Windows 7 desktop does not fill entire screen on macbook pro 17" (mid 2010)

    Hi,
    First of all I apologize for posting such a long question but in order to best describe the problem I am having with my MacBook Pro, I had to mention every detail.
    I recently installed windows 7 x64 home premium on my new macbook pro 17 inch (mid 2010). After successfully installing the bootcamp drivers (version 3.1) I have noticed that my screen resolution has become slightly smaller than before. There are half an inch thick black bars on the right side as well as on the top of the screen.
    This problem is not limited to windows, I'm having the same problem in mac osx after the windows 7 installation. Even on the start up gray screen.
    I have tried almost every trick in the book, adjusting the screen resolution from the display settings menu (which by the way are on 1920x1080), checking all the settings on the nvidia control panel, resetting the SMC, resetting the VRAM, running the hardware diagnostic test (short as well as the long one), formatting the windows partition, formatting the Mac OSX partition then performing a fresh install of both. So far, I have been frustrated with failure.
    After trying my best to resolve this issue on my own, I tried my luck with apple support. The customer representative was very helpful and listened carefully as I explained the problem to him. He asked me first to check for any available updates on my mac osx as well as in win 7. I told him that I had already installed every available update in both the OS's. He then asked me to reset the SMC and after that to reset the VRAM. Even though I had already tried this, I still gave it another shot but that didn't help.
    Since my MBP was still under the standard warranty, (I have also purchased the Apple Care Protection Plan) he asked me to take it to an Apple Authorized Service Provider. I took his advice and went to the nearest AASP. The Apple Engineer over there performed the same steps, adjusting screen resolution, resetting SMC and VRAM, but even he was not able to resolve this problem. He suggested that I should get my graphics cars replaced or if required upon inspection, the logic board replaced. To be very honest, I was very skeptical about his suggestion as the laptop is brand new, hardly 2 months old. How is it possible that there could be a problem with the hardware? I asked him whether it is possible to restore the firmware of the graphics card as the problem could be software related. He said that Apple have not started issuing firmware restoration CD's for the latest mid 2010 MBP's so a firmware restore won't be possible. My best bet would be to get the graphics card replaced or the whole logic board replaced.
    So you see, I have been down almost every possible road which could have lead to resolving this issue but unfortunately I am stuck with it. I hope any of you could offer a different approach in order to get rid of this annoying problem.
    Any help would be highly appreciated. (Trust ME!!!)

    UPDATE: I just came back after a visit to the apple service provider here in New Delhi. They have replaced the logic board on my macbook pro and guess what? the situation is still the same. No difference what so ever as far as the screen resolution is concerned. I can still see those black bars in the exact same places i.e. the right hand side as well as on the top of the screen. Even the size of the black bars are still the same.
    I am so upset right now. After trying my best in order to solve this problem I went to the AASP with high hopes. I was very confident that after replacing the logic board this annoying problem would go away but unfortunately that's not the case. Even the Apple Engineer was clueless on how to solve this problem.
    I think I'll call apple care and speak to the customer relations regarding a replacement.
    If any of you can come up with a solution to this problem please let me know.
    I'm all ears!!!

  • MacBook Pro 17" (mid 2010) desktop does not fill entire screen

    Hi,
    First of all I apologize for posting such a long question but in order to best describe the problem I am having with my MacBook Pro, I had to mention every detail.
    I recently installed windows 7 x64 home premium on my new MacBook Pro 17 inch (mid 2010). After successfully installing the Bootcamp drivers (version 3.1) I have noticed that my screen resolution has become slightly smaller than before. There are half an inch thick black bars on the right side as well as on the top of the screen.
    This problem is not limited to windows, I'm having the same problem in mac osx after the windows 7 installation. Even on the start up gray screen.
    I have tried almost every trick in the book, adjusting the screen resolution from the display settings menu (which by the way are on 1920x1080), checking all the settings on the nvidia control panel, resetting the SMC, resetting the VRAM, running the hardware diagnostic test (short as well as the long one), formatting the windows partition, formatting the Mac OSX partition then performing a fresh install of both. So far, I have been frustrated with failure.
    After trying my best to resolve this issue on my own, I tried my luck with apple support. The customer representative was very helpful and listened carefully as I explained the problem to him. He asked me first to check for any available updates on my mac osx as well as in win 7. I told him that I had already installed every available update in both the OS's. He then asked me to reset the SMC and after that to reset the VRAM. Even though I had already tried this, I still gave it another shot but that didn't help.
    Since my MBP was still under the standard warranty, (I have also purchased the Apple Care Protection Plan) he asked me to take it to an Apple Authorized Service Provider. I took his advice and went to the nearest AASP. The Apple Engineer over there performed the same steps, adjusting screen resolution, resetting SMC and VRAM, but even he was not able to resolve this problem. He suggested that I should get my graphics card replaced or if required upon inspection, the logic board replaced. To be very honest, I was very skeptical about his suggestion as the laptop is brand new, hardly 2 months old. How is it possible that there could be a problem with the hardware? I asked him whether it is possible to restore the firmware of the graphics card as the problem could be software related. He said that Apple have not started issuing firmware restoration CD's for the latest mid 2010 MBP's so a firmware restore won't be possible. My best bet would be to get the graphics card replaced or the whole logic board replaced.
    So you see, I have been down almost every possible road which could have lead to resolving this issue but unfortunately I am stuck with it. I hope any of you could offer a different approach in order to get rid of this annoying problem.
    Any help would be highly appreciated. (Trust ME!!!)
    PS: I have also posted this question on the Bootcamp forums page. Since the problem is not limited to windows 7, I decided to post here as well.

    UPDATE: I just came back after a visit to the apple service provider here in New Delhi. They have replaced the logic board on my macbook pro and guess what? the situation is still the same. No difference what so ever as far as the screen resolution is concerned. I can still see those black bars in the exact same places i.e. the right hand side as well as on the top of the screen. Even the size of the black bars are still the same.
    I am so upset right now. After trying my best in order to solve this problem I went to the AASP with high hopes. I was very confident that after replacing the logic board this annoying problem would go away but unfortunately that's not the case. Even the Apple Engineer was clueless on how to solve this problem.
    I think I'll call apple care and speak to the customer relations regarding a replacement.
    If any of you can come up with a solution to this problem please let me know.
    I'm all ears!!!

  • Actual webpage content does not fill entire web browser.

    how do i attach a screen shot to this inquiry?

    This is occurring on only one page of one site, but the page zoom only enlarges the narrow box. In short, the box is still too shallow to view the necessary listed information without excessive scrolling. This is occurring on only my desktop computer, not my laptop.

  • I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

    I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

    I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!

  • Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3 aspect ratio

    I am using premiere pro cc. I burned a dvd several times,trying different presets. On each occasion the dvd never fills the screen. It does not lool like letterbox ( 16 x 9 ). There is space all around the picture / video. Need assistance fast,project is already late.Thanks in advance.
    Theo Smith

    I sent the screenshot via an e-mail attachment. I wasn't aware  that
    attachments could not be forwarded this way. I will send it again. First  time
    I've utilized this service.
    In a message dated 3/8/2015 10:15:23 A.M. Eastern Daylight Time, 
    [email protected] writes:
    Dvd  burned in premiere pro cc does not fill the screen. Desire a 4:3
    aspect  ratio
    created by Peru Bob (https://forums.adobe.com/people/Peru+Bob)  in Adobe 
    Media Encoder (AME) - View the full  discussion
    (https://forums.adobe.com/message/7264779#7264779)

  • Mac Book Pro just got it, all was well for 2 weeks now Finder window does not fill whole screen, there is an 1 1/2" space of black on the right side and the Finder window had a 1" section that flipped like a rolling tv now it is a white bar! Help!

    Mac Book Pro just got it, all was well for 2 weeks now Finder window does not fill whole screen, there is an 1 1/2" space of black on the right side and the Finder window had a 1" section that flipped like a rolling tv now it is a white bar! Help!

    Bad video card, call Apple, get a case number and return it.

  • Why the photo does not fill all the paper ?

    Hi, I am using a Deskjet 1000 printer.
    Every time I try to print a 10x15cm photo on a 10x15cm photo paper it does not fill the entire paper. There is a margin on top and bottom (about 5mm) on left ( 15mm) and right side (3 mm).
    I used Picasa and other softwares, tried different format settings without result.
    It used to work perfectly with my previous Photosmart (which died recently...)
    Regards

    Hi Philoupop,
    If this is your printer, it might be a product limitation for borderless printing. See paper handling section.
    Hope this helps you clarify things!
    ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
    Cheers!
    * If this post has helped you, the White Kudos star on the left is a great way to say thanks!
    * Please mark Accept As Solution if it solves your problem so other users can benefit as well.

  • TableColumn Label not filling entire column

    All
    I have a table column with a Label but when I set the text and say set the background color that does not fill the entire TableColumn.

    Not sure if you mean a column in a row ?
    You can use:
    tableView.setColumnResizePolicy(TableView.CONSTRAINED_RESIZE_POLICY);This will expand the columns to fit the displayable area.
    You can then use setPrefWidth(Double.MAX_VALUE) on the label to tell it to use all space made available by the expanded table cell.
    Label labelToDisplayInTab = new Label("bla bla");
    labelToDisplayInTab.setPrefWidth(Double.MAX_VALUE);Hope this helps.
    If not then please supply a bit more information so that I can figure out exactly where your problem is.

  • *Program "SAPMV45A" tried to use screen 0000. The screen does not exist*.

    Dear Experts,
    I have copied a program SAPMV45A (VA01) to ZSAPMV45A and created the transaction ZVA01.
    I have maitained the transaction ZVA01 in V_T180 of SM30 by copying VA01.
    after doing all, when I execute the transaction ZVA01 it will go to the initial screen of create Sales Order after enter the header information like Order Type, Sales Org, Distribution Channel & Division if click Enter it will go to short dump where I am getting the information as shown below
    Program "SAPMV45A" tried to use screen 0000.
    The screen does not exist.
    If any one have an idea please let me know the solution to rectify this problem.
    Thank You,
    Best Regards
    Venkatesh

    Hi
    in transaction VFBS we have....
    Function Codes                            T185F
    Paths between Process. locations  T185
    Processing Locations                    T185V                                         
    Dialogs                                         T185D
    Development Support                     T185E
    Tab Control                                   TAXITABS
    To maintain the Screen Sequence is it enough to fill Dialogs T185D or do I need to fill all all...?
    if so can I maintain the same info for ZSAPMV45A as which is there for the standard profram SAPMV45A ?
    Regards
    Venkatesh

  • Laptop screen does not turn on after resume from suspend/hibernate

    I use systemctl suspend/hibernate to resume,  but the screen does not turn on from resume. everything else still functions just fine, meaning i can type in reboot and reboot, but a "turned off" black screen.
    00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Complex
    00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek [Radeon HD 6520G]
    00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]
    00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port
    00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]
    00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
    00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
    00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
    00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
    00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 13)
    00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller
    00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
    00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
    00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
    00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0)
    00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1)
    00:15.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 2)
    00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
    00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
    00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
    00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
    00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
    00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
    00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
    00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
    00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
    00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
    04:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
    05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.19.0-1-ARCH (builduser@tobias) (gcc version 4.9.2 20150204 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Feb 9 07:08:20 CET 2015
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70f3d39a-cd3c-4127-84d2-9af3430201ab rw quiet rootfstype=xfs i8042.nomux=1 i8042.reset
    [ 0.000000] tseg: 009ff00000
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009f8f4fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009f8f5000-0x000000009f939fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f93a000-0x000000009f951fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009f952000-0x000000009f954fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f955000-0x000000009f955fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009f956000-0x000000009f96cfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009f96d000-0x000000009f974fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f975000-0x000000009f9a4fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009f9a5000-0x000000009f9a5fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f9a6000-0x000000009f9b5fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009f9b6000-0x000000009f9c3fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f9c4000-0x000000009f9c5fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009f9c6000-0x000000009f9ccfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f9cd000-0x000000009fa02fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009fa03000-0x000000009fc05fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009fc06000-0x000000009fd78fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009fd79000-0x000000009fef5fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009fef6000-0x000000009fefffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: TOSHIBA Satellite L775D/TKBSS, BIOS 1.40 07/22/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF write-through
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FF00000000 write-back
    [ 0.000000] 1 base 009FF00000 mask FFFFF00000 uncachable
    [ 0.000000] 2 base 00A0000000 mask FFE0000000 uncachable
    [ 0.000000] 3 base 00C0000000 mask FFC0000000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 000000023f000000 aka 9200M
    [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
    [ 0.000000] e820: update [mem 0x9ff00000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0x9ff00 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fcf30-0x000fcf3f] mapped at [ffff8800000fcf30]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x23ee00000-0x23effffff]
    [ 0.000000] [mem 0x23ee00000-0x23effffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x220000000-0x23edfffff]
    [ 0.000000] [mem 0x220000000-0x23edfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
    [ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9f8f4fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0x9f7fffff] page 2M
    [ 0.000000] [mem 0x9f800000-0x9f8f4fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9f955000-0x9f955fff]
    [ 0.000000] [mem 0x9f955000-0x9f955fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9f9a6000-0x9f9b5fff]
    [ 0.000000] [mem 0x9f9a6000-0x9f9b5fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9fc06000-0x9fd78fff]
    [ 0.000000] [mem 0x9fc06000-0x9fd78fff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x9fef6000-0x9fefffff]
    [ 0.000000] [mem 0x9fef6000-0x9fefffff] page 4k
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x100001000-0x1ffffffff]
    [ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
    [ 0.000000] [mem 0x100200000-0x13fffffff] page 2M
    [ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x37652000-0x37b20fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 TOSASU)
    [ 0.000000] ACPI: XSDT 0x000000009F93A070 000064 (v01 TOSASU TOSASU00 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x000000009F94E438 0000F4 (v04 TOSASU TOSASU00 01072009 AMI 00010013)
    [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-649)
    [ 0.000000] ACPI: DSDT 0x000000009F93A168 0142CF (v02 TOSASU TOSASU00 00000140 INTL 20051117)
    [ 0.000000] ACPI: FACS 0x000000009F9C6F80 000040
    [ 0.000000] ACPI: APIC 0x000000009F94E530 000072 (v03 TOSASU TOSASU00 01072009 AMI 00010013)
    [ 0.000000] ACPI: ECDT 0x000000009F94E5A8 0000C1 (v01 TOSASU TOSASU00 01072009 AMI. 00000004)
    [ 0.000000] ACPI: SLIC 0x000000009F94E670 000176 (v01 TOSASU TOSASU00 01072009 MSFT 00000001)
    [ 0.000000] ACPI: MCFG 0x000000009F94E7E8 00003C (v01 A M I GMCH945. 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x000000009F94E828 000038 (v01 TOSASU TOSASU00 01072009 AMI 00000004)
    [ 0.000000] ACPI: SSDT 0x000000009F94E860 000E34 (v01 AMD POWERNOW 00000001 AMD 00000001)
    [ 0.000000] ACPI: SSDT 0x000000009F94F698 00193D (v02 AMD ALIB 00000001 MSFT 04000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x23eff8000-0x23effbfff]
    [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023e5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x23effffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
    [ 0.000000] node 0: [mem 0x00100000-0x9f8f4fff]
    [ 0.000000] node 0: [mem 0x9f955000-0x9f955fff]
    [ 0.000000] node 0: [mem 0x9f9a6000-0x9f9b5fff]
    [ 0.000000] node 0: [mem 0x9fc06000-0x9fd78fff]
    [ 0.000000] node 0: [mem 0x9fef6000-0x9fefffff]
    [ 0.000000] node 0: [mem 0x100001000-0x23effffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23effffff]
    [ 0.000000] On node 0 totalpages: 1960479
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 10155 pages used for memmap
    [ 0.000000] DMA32 zone: 649859 pages, LIFO batch:31
    [ 0.000000] Normal zone: 20416 pages used for memmap
    [ 0.000000] Normal zone: 1306623 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f8f5000-0x9f939fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f93a000-0x9f951fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f952000-0x9f954fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f956000-0x9f96cfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f96d000-0x9f974fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f975000-0x9f9a4fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9a5000-0x9f9a5fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9b6000-0x9f9c3fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9c4000-0x9f9c5fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9c6000-0x9f9ccfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9cd000-0x9fa02fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fa03000-0x9fc05fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fd79000-0x9fef5fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9ff00000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
    [ 0.000000] e820: [mem 0x9ff00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023ec00000 s86336 r8192 d32448 u524288
    [ 0.000000] pcpu-alloc: s86336 r8192 d32448 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1929823
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70f3d39a-cd3c-4127-84d2-9af3430201ab rw quiet rootfstype=xfs i8042.nomux=1 i8042.reset
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7635708K/7841916K available (5531K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 206208K reserved, 0K cma-reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:456 16
    [ 0.000000] spurious 8259A interrupt: IRQ7.
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1397.380 MHz processor
    [ 0.000043] Calibrating delay loop (skipped), value calculated using timer frequency.. 2795.20 BogoMIPS (lpj=4657933)
    [ 0.000046] pid_max: default: 32768 minimum: 301
    [ 0.000053] ACPI: Core revision 20141107
    [ 0.000055] TOSHIBA Satellite detected - force copy of DSDT to local memory
    [ 0.000123] ACPI: Forced DSDT copy: length 0x142CF copied locally, original unmapped
    [ 0.015021] ACPI: All ACPI Tables successfully acquired
    [ 0.016280] Security Framework initialized
    [ 0.016286] Yama: becoming mindful.
    [ 0.016907] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.019182] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.020189] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.020201] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.020472] Initializing cgroup subsys memory
    [ 0.020479] Initializing cgroup subsys devices
    [ 0.020482] Initializing cgroup subsys freezer
    [ 0.020484] Initializing cgroup subsys net_cls
    [ 0.020487] Initializing cgroup subsys blkio
    [ 0.020510] CPU: Physical Processor ID: 0
    [ 0.020511] CPU: Processor Core ID: 0
    [ 0.020513] mce: CPU supports 6 MCE banks
    [ 0.020522] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
    Last level dTLB entries: 4KB 1024, 2MB 128, 4MB 64, 1GB 0
    [ 0.020644] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
    [ 0.021880] ftrace: allocating 21166 entries in 83 pages
    [ 0.035456] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.068473] smpboot: CPU0: AMD A6-3400M APU with Radeon(tm) HD Graphics (fam: 12, model: 01, stepping: 00)
    [ 0.174081] Performance Events: AMD PMU driver.
    [ 0.174086] ... version: 0
    [ 0.174087] ... bit width: 48
    [ 0.174088] ... generic registers: 4
    [ 0.174089] ... value mask: 0000ffffffffffff
    [ 0.174090] ... max period: 00007fffffffffff
    [ 0.174091] ... fixed-purpose events: 0
    [ 0.174092] ... event mask: 000000000000000f
    [ 0.191034] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.197738] x86: Booting SMP configuration:
    [ 0.197744] .... node #0, CPUs: #1 #2 #3
    [ 0.250891] x86: Booted up 1 node, 4 CPUs
    [ 0.250896] smpboot: Total of 4 processors activated (11183.83 BogoMIPS)
    [ 0.252264] devtmpfs: initialized
    [ 0.257696] PM: Registering ACPI NVS region [mem 0x9f8f5000-0x9f939fff] (282624 bytes)
    [ 0.257715] PM: Registering ACPI NVS region [mem 0x9f952000-0x9f954fff] (12288 bytes)
    [ 0.257718] PM: Registering ACPI NVS region [mem 0x9f96d000-0x9f974fff] (32768 bytes)
    [ 0.257721] PM: Registering ACPI NVS region [mem 0x9f9a5000-0x9f9a5fff] (4096 bytes)
    [ 0.257724] PM: Registering ACPI NVS region [mem 0x9f9b6000-0x9f9c3fff] (57344 bytes)
    [ 0.257727] PM: Registering ACPI NVS region [mem 0x9f9c6000-0x9f9ccfff] (28672 bytes)
    [ 0.257729] PM: Registering ACPI NVS region [mem 0x9fa03000-0x9fc05fff] (2109440 bytes)
    [ 0.258125] pinctrl core: initialized pinctrl subsystem
    [ 0.258173] RTC time: 18:50:52, date: 02/22/15
    [ 0.258343] NET: Registered protocol family 16
    [ 0.270952] cpuidle: using governor ladder
    [ 0.284279] cpuidle: using governor menu
    [ 0.284490] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.284493] ACPI: bus type PCI registered
    [ 0.284495] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.284605] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.284608] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.285035] PCI: Using configuration type 1 for base access
    [ 0.299021] ACPI: Added _OSI(Module Device)
    [ 0.299025] ACPI: Added _OSI(Processor Device)
    [ 0.299027] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.299029] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.300870] ACPI : EC: EC description table is found, configuring boot EC
    [ 0.302900] ACPI: Executed 2 blocks of module-level executable AML code
    [ 0.831121] ACPI: Interpreter enabled
    [ 0.831132] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
    [ 0.831140] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
    [ 0.831167] ACPI: (supports S0 S3 S4 S5)
    [ 0.831169] ACPI: Using IOAPIC for interrupt routing
    [ 0.831382] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.842727] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.842738] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.843157] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [ 0.843782] PCI host bridge to bus 0000:00
    [ 0.843788] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.843792] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
    [ 0.843796] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
    [ 0.843800] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
    [ 0.843803] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.843806] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.843810] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.843813] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
    [ 0.843825] pci 0000:00:00.0: [1022:1705] type 00 class 0x060000
    [ 0.843978] pci 0000:00:01.0: [1002:9647] type 00 class 0x030000
    [ 0.843993] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
    [ 0.844002] pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
    [ 0.844011] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
    [ 0.844070] pci 0000:00:01.0: supports D1 D2
    [ 0.844185] pci 0000:00:01.1: [1002:1714] type 00 class 0x040300
    [ 0.844197] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
    [ 0.844272] pci 0000:00:01.1: supports D1 D2
    [ 0.844388] pci 0000:00:02.0: [1022:1707] type 01 class 0x060400
    [ 0.844483] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.844641] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
    [ 0.844665] pci 0000:00:11.0: reg 0x10: [io 0xf190-0xf197]
    [ 0.844678] pci 0000:00:11.0: reg 0x14: [io 0xf180-0xf183]
    [ 0.844690] pci 0000:00:11.0: reg 0x18: [io 0xf170-0xf177]
    [ 0.844703] pci 0000:00:11.0: reg 0x1c: [io 0xf160-0xf163]
    [ 0.844715] pci 0000:00:11.0: reg 0x20: [io 0xf150-0xf15f]
    [ 0.844728] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4e000-0xfeb4e7ff]
    [ 0.844896] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
    [ 0.844914] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4d000-0xfeb4dfff]
    [ 0.845044] pci 0000:00:12.0: System wakeup disabled by ACPI
    [ 0.845114] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
    [ 0.845138] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4c000-0xfeb4c0ff]
    [ 0.845242] pci 0000:00:12.2: supports D1 D2
    [ 0.845245] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 0.845313] pci 0000:00:12.2: System wakeup disabled by ACPI
    [ 0.845383] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
    [ 0.845400] pci 0000:00:13.0: reg 0x10: [mem 0xfeb4b000-0xfeb4bfff]
    [ 0.845529] pci 0000:00:13.0: System wakeup disabled by ACPI
    [ 0.845599] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
    [ 0.845623] pci 0000:00:13.2: reg 0x10: [mem 0xfeb4a000-0xfeb4a0ff]
    [ 0.845727] pci 0000:00:13.2: supports D1 D2
    [ 0.845730] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 0.845799] pci 0000:00:13.2: System wakeup disabled by ACPI
    [ 0.845867] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
    [ 0.846051] pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
    [ 0.846069] pci 0000:00:14.1: reg 0x10: [io 0xf140-0xf147]
    [ 0.846081] pci 0000:00:14.1: reg 0x14: [io 0xf130-0xf133]
    [ 0.846094] pci 0000:00:14.1: reg 0x18: [io 0xf120-0xf127]
    [ 0.846107] pci 0000:00:14.1: reg 0x1c: [io 0xf110-0xf113]
    [ 0.846119] pci 0000:00:14.1: reg 0x20: [io 0xf100-0xf10f]
    [ 0.846145] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
    [ 0.846148] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
    [ 0.846151] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
    [ 0.846154] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
    [ 0.846275] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
    [ 0.846303] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
    [ 0.846387] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.846454] pci 0000:00:14.2: System wakeup disabled by ACPI
    [ 0.846515] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
    [ 0.846704] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
    [ 0.846806] pci 0000:00:14.4: System wakeup disabled by ACPI
    [ 0.846879] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
    [ 0.846982] pci 0000:00:15.0: supports D1 D2
    [ 0.847053] pci 0000:00:15.0: System wakeup disabled by ACPI
    [ 0.847122] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
    [ 0.847225] pci 0000:00:15.1: supports D1 D2
    [ 0.847296] pci 0000:00:15.1: System wakeup disabled by ACPI
    [ 0.847363] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
    [ 0.847466] pci 0000:00:15.2: supports D1 D2
    [ 0.847537] pci 0000:00:15.2: System wakeup disabled by ACPI
    [ 0.847610] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
    [ 0.847628] pci 0000:00:16.0: reg 0x10: [mem 0xfeb49000-0xfeb49fff]
    [ 0.847757] pci 0000:00:16.0: System wakeup disabled by ACPI
    [ 0.847827] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
    [ 0.847851] pci 0000:00:16.2: reg 0x10: [mem 0xfeb48000-0xfeb480ff]
    [ 0.847956] pci 0000:00:16.2: supports D1 D2
    [ 0.847959] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    [ 0.848026] pci 0000:00:16.2: System wakeup disabled by ACPI
    [ 0.848093] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
    [ 0.848228] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
    [ 0.848359] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
    [ 0.848490] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
    [ 0.848632] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
    [ 0.848762] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
    [ 0.848892] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
    [ 0.849021] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
    [ 0.849252] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.849360] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
    [ 0.849372] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
    [ 0.849376] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
    [ 0.849379] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
    [ 0.849383] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.849387] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.849390] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.849394] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
    [ 0.849483] pci 0000:00:15.0: PCI bridge to [bus 03]
    [ 0.849617] pci 0000:04:00.0: [10ec:8176] type 00 class 0x028000
    [ 0.849646] pci 0000:04:00.0: reg 0x10: [io 0xe000-0xe0ff]
    [ 0.849687] pci 0000:04:00.0: reg 0x18: [mem 0xfea00000-0xfea03fff 64bit]
    [ 0.849834] pci 0000:04:00.0: supports D1 D2
    [ 0.849837] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.849878] pci 0000:04:00.0: System wakeup disabled by ACPI
    [ 0.854467] pci 0000:00:15.1: PCI bridge to [bus 04]
    [ 0.854488] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
    [ 0.854499] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.854661] pci 0000:05:00.0: [10ec:8136] type 00 class 0x020000
    [ 0.854688] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
    [ 0.854722] pci 0000:05:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
    [ 0.854743] pci 0000:05:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
    [ 0.854860] pci 0000:05:00.0: supports D1 D2
    [ 0.854863] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.854907] pci 0000:05:00.0: System wakeup disabled by ACPI
    [ 0.861144] pci 0000:00:15.2: PCI bridge to [bus 05]
    [ 0.861165] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
    [ 0.861180] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.861237] acpi PNP0A03:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.861791] ACPI: PCI Interrupt Link [LN24] (IRQs *24)
    [ 0.861823] ACPI: PCI Interrupt Link [LN25] (IRQs *25)
    [ 0.861855] ACPI: PCI Interrupt Link [LN26] (IRQs *26)
    [ 0.861887] ACPI: PCI Interrupt Link [LN27] (IRQs *27)
    [ 0.861918] ACPI: PCI Interrupt Link [LN28] (IRQs *28)
    [ 0.861951] ACPI: PCI Interrupt Link [LN29] (IRQs *29)
    [ 0.861981] ACPI: PCI Interrupt Link [LN30] (IRQs *30)
    [ 0.862011] ACPI: PCI Interrupt Link [LN31] (IRQs *31)
    [ 0.862041] ACPI: PCI Interrupt Link [LN32] (IRQs *32)
    [ 0.862071] ACPI: PCI Interrupt Link [LN33] (IRQs *33)
    [ 0.862101] ACPI: PCI Interrupt Link [LN34] (IRQs *34)
    [ 0.862130] ACPI: PCI Interrupt Link [LN35] (IRQs *35)
    [ 0.862160] ACPI: PCI Interrupt Link [LN36] (IRQs *36)
    [ 0.862190] ACPI: PCI Interrupt Link [LN37] (IRQs *37)
    [ 0.862219] ACPI: PCI Interrupt Link [LN38] (IRQs *38)
    [ 0.862249] ACPI: PCI Interrupt Link [LN39] (IRQs *39)
    [ 0.862279] ACPI: PCI Interrupt Link [LN40] (IRQs *40)
    [ 0.862309] ACPI: PCI Interrupt Link [LN41] (IRQs *41)
    [ 0.862338] ACPI: PCI Interrupt Link [LN42] (IRQs *42)
    [ 0.862368] ACPI: PCI Interrupt Link [LN43] (IRQs *43)
    [ 0.862398] ACPI: PCI Interrupt Link [LN44] (IRQs *44)
    [ 0.862428] ACPI: PCI Interrupt Link [LN45] (IRQs *45)
    [ 0.862457] ACPI: PCI Interrupt Link [LN46] (IRQs *46)
    [ 0.862487] ACPI: PCI Interrupt Link [LN47] (IRQs *47)
    [ 0.862517] ACPI: PCI Interrupt Link [LN48] (IRQs *48)
    [ 0.862546] ACPI: PCI Interrupt Link [LN49] (IRQs *49)
    [ 0.862576] ACPI: PCI Interrupt Link [LN50] (IRQs *50)
    [ 0.862606] ACPI: PCI Interrupt Link [LN51] (IRQs *51)
    [ 0.862635] ACPI: PCI Interrupt Link [LN52] (IRQs *52)
    [ 0.862665] ACPI: PCI Interrupt Link [LN53] (IRQs *53)
    [ 0.862695] ACPI: PCI Interrupt Link [LN54] (IRQs *54)
    [ 0.862726] ACPI: PCI Interrupt Link [LN55] (IRQs *55)
    [ 0.862781] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.862883] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.862986] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863084] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863164] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863228] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863292] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863356] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.864141] ACPI : EC: GPE = 0xc, I/O: command/status = 0x66, data = 0x62
    [ 0.864446] vgaarb: setting as boot device: PCI:0000:00:01.0
    [ 0.864452] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.864464] vgaarb: loaded
    [ 0.864466] vgaarb: bridge control possible 0000:00:01.0
    [ 0.864788] PCI: Using ACPI for IRQ routing
    [ 0.874741] PCI: pci_cache_line_size set to 64 bytes
    [ 0.874840] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
    [ 0.874844] e820: reserve RAM buffer [mem 0x9f8f5000-0x9fffffff]
    [ 0.874848] e820: reserve RAM buffer [mem 0x9f956000-0x9fffffff]
    [ 0.874851] e820: reserve RAM buffer [mem 0x9f9b6000-0x9fffffff]
    [ 0.874854] e820: reserve RAM buffer [mem 0x9fd79000-0x9fffffff]
    [ 0.874856] e820: reserve RAM buffer [mem 0x9ff00000-0x9fffffff]
    [ 0.874859] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
    [ 0.875079] NetLabel: Initializing
    [ 0.875081] NetLabel: domain hash size = 128
    [ 0.875083] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.875101] NetLabel: unlabeled traffic allowed by default
    [ 0.875143] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.875149] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [ 0.877246] Switched to clocksource hpet
    [ 0.884868] pnp: PnP ACPI init
    [ 0.885072] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.885079] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.886017] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [ 0.886021] system 00:01: [io 0x040b] has been reserved
    [ 0.886025] system 00:01: [io 0x04d6] has been reserved
    [ 0.886029] system 00:01: [io 0x0c00-0x0c01] has been reserved
    [ 0.886032] system 00:01: [io 0x0c14] has been reserved
    [ 0.886036] system 00:01: [io 0x0c50-0x0c51] has been reserved
    [ 0.886039] system 00:01: [io 0x0c52] has been reserved
    [ 0.886042] system 00:01: [io 0x0c6c] has been reserved
    [ 0.886046] system 00:01: [io 0x0c6f] has been reserved
    [ 0.886049] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.886052] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.886056] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
    [ 0.886059] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
    [ 0.886063] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
    [ 0.886067] system 00:01: [io 0x0800-0x089f] could not be reserved
    [ 0.886070] system 00:01: [io 0x0b20-0x0b3f] has been reserved
    [ 0.886074] system 00:01: [io 0x0900-0x090f] has been reserved
    [ 0.886082] system 00:01: [io 0x0910-0x091f] has been reserved
    [ 0.886086] system 00:01: [io 0xfe00-0xfefe] has been reserved
    [ 0.886091] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.886096] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.886100] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
    [ 0.886104] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
    [ 0.886107] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
    [ 0.886112] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
    [ 0.886116] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.886120] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.886180] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.886279] system 00:03: [io 0x04d0-0x04d1] has been reserved
    [ 0.886283] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.886353] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.886420] system 00:05: [io 0x0240-0x0259] has been reserved
    [ 0.886424] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.886523] pnp 00:06: Plug and Play ACPI device, IDs TOS0220 SYN1d00 SYN0002 PNP0f13 (active)
    [ 0.886596] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.886784] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.887277] pnp: PnP ACPI: found 9 devices
    [ 0.895955] pci 0000:00:02.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
    [ 0.895964] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
    [ 0.895969] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
    [ 0.896008] pci 0000:00:02.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.896012] pci 0000:00:02.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.896016] pci 0000:00:02.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.896026] pci 0000:00:02.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
    [ 0.896039] pci 0000:00:02.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
    [ 0.896046] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
    [ 0.896051] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.896056] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
    [ 0.896061] pci 0000:00:02.0: bridge window [mem 0xd0100000-0xd02fffff]
    [ 0.896067] pci 0000:00:02.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
    [ 0.896073] pci 0000:00:14.4: PCI bridge to [bus 02]
    [ 0.896089] pci 0000:00:15.0: PCI bridge to [bus 03]
    [ 0.896103] pci 0000:00:15.1: PCI bridge to [bus 04]
    [ 0.896107] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
    [ 0.896114] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.896124] pci 0000:00:15.2: PCI bridge to [bus 05]
    [ 0.896129] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
    [ 0.896138] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.896147] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
    [ 0.896151] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
    [ 0.896154] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
    [ 0.896157] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
    [ 0.896160] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.896164] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.896167] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.896171] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
    [ 0.896174] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
    [ 0.896178] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
    [ 0.896182] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
    [ 0.896185] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
    [ 0.896188] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
    [ 0.896191] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
    [ 0.896194] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.896198] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.896201] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.896205] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
    [ 0.896208] pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
    [ 0.896212] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
    [ 0.896215] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.896259] NET: Registered protocol family 2
    [ 0.896597] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.896863] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.897301] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.897360] TCP: reno registered
    [ 0.897379] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.897467] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.897618] NET: Registered protocol family 1
    [ 0.897646] pci 0000:00:01.0: Video device with shadowed ROM
    [ 1.838171] PCI: CLS 64 bytes, default 64
    [ 1.838242] Unpacking initramfs...
    [ 1.934095] Freeing initrd memory: 4924K (ffff880037652000 - ffff880037b21000)
    [ 1.934107] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.934110] software IO TLB [mem 0x9b8f5000-0x9f8f5000] (64MB) mapped at [ffff88009b8f5000-ffff88009f8f4fff]
    [ 1.934495] microcode: CPU0: patch_level=0x03000014
    [ 1.934537] microcode: CPU1: patch_level=0x03000014
    [ 1.934580] microcode: CPU2: patch_level=0x03000014
    [ 1.934625] microcode: CPU3: patch_level=0x03000014
    [ 1.934758] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 1.934766] LVT offset 0 assigned for vector 0x400
    [ 1.934817] perf: AMD IBS detected (0x000000ff)
    [ 1.934854] Scanning for low memory corruption every 60 seconds
    [ 1.935293] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 1.935315] Initialise system trusted keyring
    [ 1.935789] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.937285] zpool: loaded
    [ 1.937288] zbud: loaded
    [ 1.937658] VFS: Disk quotas dquot_6.5.2
    [ 1.937709] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.937948] Key type big_key registered
    [ 1.938436] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.938508] io scheduler noop registered
    [ 1.938511] io scheduler deadline registered
    [ 1.938546] io scheduler cfq registered (default)
    [ 1.939375] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
    [ 1.939380] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
    [ 1.939399] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
    [ 1.939403] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
    [ 1.939421] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
    [ 1.939423] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
    [ 1.939428] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
    [ 1.939447] pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
    [ 1.939449] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
    [ 1.939453] pcie_pme 0000:00:15.2:pcie01: service driver pcie_pme loaded
    [ 1.939461] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.939494] pciehp 0000:00:02.0:pcie04: Slot #2 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
    [ 1.939528] pciehp 0000:00:02.0:pcie04: service driver pciehp loaded
    [ 1.939533] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.939550] vesafb: mode is 1152x864x32, linelength=4608, pages=0
    [ 1.939552] vesafb: scrolling: redraw
    [ 1.939554] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 1.939576] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 3904k, total 3904k
    [ 1.955978] Console: switching to colour frame buffer device 144x54
    [ 1.972261] fb0: VESA VGA frame buffer device
    [ 1.972328] GHES: HEST is not enabled!
    [ 1.972535] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.973720] Linux agpgart interface v0.103
    [ 1.973797] rtc_cmos 00:02: RTC can wake from S4
    [ 1.973936] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 1.973964] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 1.973983] ledtrig-cpu: registered to indicate activity on CPUs
    [ 1.974434] TCP: cubic registered
    [ 1.974593] NET: Registered protocol family 10
    [ 1.975020] NET: Registered protocol family 17
    [ 1.975476] Loading compiled-in X.509 certificates
    [ 1.975502] registered taskstats version 1
    [ 1.976231] Magic number: 3:326:848
    [ 1.976341] rtc_cmos 00:02: setting system clock to 2015-02-22 18:50:54 UTC (1424631054)
    [ 1.976444] PM: Hibernation image not present or could not be loaded.
    [ 1.977023] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
    [ 1.977027] Write protecting the kernel read-only data: 8192k
    [ 1.977495] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
    [ 1.977718] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
    [ 1.979659] random: systemd urandom read with 1 bits of entropy available
    [ 1.980307] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
    [ 1.980576] systemd[1]: Detected architecture 'x86-64'.
    [ 1.980581] systemd[1]: Running in initial RAM disk.
    [ 1.980590] systemd[1]: Running with unpopulated /etc.
    [ 1.980603] systemd[1]: No hostname configured.
    [ 1.980609] systemd[1]: Set hostname to <localhost>.
    [ 1.980655] systemd[1]: Initializing machine ID from random generator.
    [ 1.996373] systemd[1]: Populated /etc with preset unit settings.
    [ 1.999327] systemd[1]: Unit type .busname is not supported on this system.
    [ 2.003390] systemd[1]: Created slice -.slice.
    [ 2.003412] systemd[1]: Starting -.slice.
    [ 2.005054] systemd[1]: Listening on Journal Audit Socket.
    [ 2.005188] systemd[1]: Created slice system.slice.
    [ 2.005200] systemd[1]: Starting system.slice.
    [ 2.005218] systemd[1]: Reached target Swap.
    [ 2.005226] systemd[1]: Starting Swap.
    [ 2.005288] systemd[1]: Listening on udev Control Socket.
    [ 2.005296] systemd[1]: Starting udev Control Socket.
    [ 2.005312] systemd[1]: Reached target Slices.
    [ 2.005320] systemd[1]: Starting Slices.
    [ 2.005335] systemd[1]: Reached target Local File Systems.
    [ 2.005342] systemd[1]: Starting Local File Systems.
    [ 2.005358] systemd[1]: Reached target Timers.
    [ 2.005366] systemd[1]: Starting Timers.
    [ 2.005398] systemd[1]: Listening on udev Kernel Socket.
    [ 2.005409] systemd[1]: Starting udev Kernel Socket.
    [ 2.005430] systemd[1]: Reached target Paths.
    [ 2.005441] systemd[1]: Starting Paths.
    [ 2.005497] systemd[1]: Listening on Journal Socket.
    [ 2.005510] systemd[1]: Starting Journal Socket.
    [ 2.006097] systemd[1]: Starting udev Coldplug all Devices...
    [ 2.006689] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 2.006801] systemd[1]: Created slice system-systemd\x2dfsck.slice.
    [ 2.006811] systemd[1]: Starting system-systemd\x2dfsck.slice.
    [ 2.006860] systemd[1]: Listening on Journal Socket (/dev/log).
    [ 2.006870] systemd[1]: Starting Journal Socket (/dev/log).
    [ 2.007428] systemd[1]: Starting Journal Service...
    [ 2.007472] systemd[1]: Reached target Sockets.
    [ 2.007494] systemd[1]: Starting Sockets.
    [ 2.011399] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [ 2.012026] systemd[1]: Starting Create Static Device Nodes in /dev...
    [ 2.012842] systemd-journald[63]: Failed to set file attributes: Inappropriate ioctl for device
    [ 2.016230] systemd[1]: Started Create Static Device Nodes in /dev.
    [ 2.016999] systemd[1]: Starting udev Kernel Device Manager...
    [ 2.021212] systemd[1]: Started udev Kernel Device Manager.
    [ 2.024169] systemd[1]: Started udev Coldplug all Devices.
    [ 2.029792] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.032026] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.032044] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.041719] SCSI subsystem initialized
    [ 2.042505] ACPI: bus type USB registered
    [ 2.042538] usbcore: registered new interface driver usbfs
    [ 2.042552] usbcore: registered new interface driver hub
    [ 2.042588] usbcore: registered new device driver usb
    [ 2.044174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.045154] systemd[1]: Started Journal Service.
    [ 2.045633] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 2.045840] ohci-pci: OHCI PCI platform driver
    [ 2.045993] QUIRK: Enable AMD PLL fix
    [ 2.046022] ohci-pci 0000:00:12.0: OHCI PCI host controller
    [ 2.046033] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
    [ 2.046079] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4d000
    [ 2.046697] ehci-pci: EHCI PCI platform driver
    [ 2.047833] libata version 3.00 loaded.
    [ 2.084196] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.102273] hub 1-0:1.0: USB hub found
    [ 2.102287] hub 1-0:1.0: 5 ports detected
    [ 2.102593] ohci-pci 0000:00:13.0: OHCI PCI host controller
    [ 2.102600] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
    [ 2.102631] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4b000
    [ 2.159071] hub 2-0:1.0: USB hub found
    [ 2.159085] hub 2-0:1.0: 5 ports detected
    [ 2.160195] ohci-pci 0000:00:16.0: OHCI PCI host controller
    [ 2.160202] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 3
    [ 2.160235] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb49000
    [ 2.215699] hub 3-0:1.0: USB hub found
    [ 2.215713] hub 3-0:1.0: 4 ports detected
    [ 2.271489] ehci-pci 0000:00:12.2: EHCI Host Controller
    [ 2.271502] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 4
    [ 2.271509] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 2.271523] ehci-pci 0000:00:12.2: debug port 1
    [ 2.271574] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4c000
    [ 2.281276] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 2.281694] hub 4-0:1.0: USB hub found
    [ 2.281705] hub 4-0:1.0: 5 ports detected
    [ 2.338086] hub 1-0:1.0: USB hub found
    [ 2.338100] hub 1-0:1.0: 5 ports detected
    [ 2.338571] ehci-pci 0000:00:13.2: EHCI Host Controller
    [ 2.338579] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 5
    [ 2.338584] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 2.338596] ehci-pci 0000:00:13.2: debug port 1
    [ 2.338634] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4a000
    [ 2.347963] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 2.348396] hub 5-0:1.0: USB hub found
    [ 2.348414] hub 5-0:1.0: 5 ports detected
    [ 2.404806] hub 2-0:1.0: USB hub found
    [ 2.404820] hub 2-0:1.0: 5 ports detected
    [ 2.461536] ehci-pci 0000:00:16.2: EHCI Host Controller
    [ 2.461550] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 6
    [ 2.461557] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 2.461571] ehci-pci 0000:00:16.2: debug port 1
    [ 2.461611] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb48000
    [ 2.471331] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
    [ 2.471768] hub 6-0:1.0: USB hub found
    [ 2.471780] hub 6-0:1.0: 4 ports detected
    [ 2.528139] hub 3-0:1.0: USB hub found
    [ 2.528154] hub 3-0:1.0: 4 ports detected
    [ 2.528415] ahci 0000:00:11.0: version 3.0
    [ 2.528689] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    [ 2.528693] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
    [ 2.529180] scsi host0: ahci
    [ 2.529664] scsi host1: ahci
    [ 2.529777] ata1: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e100 irq 28
    [ 2.529781] ata2: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e180 irq 28
    [ 2.530551] scsi host2: pata_atiixp
    [ 2.530815] scsi host3: pata_atiixp
    [ 2.530912] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
    [ 2.530914] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
    [ 2.654798] usb 5-4: new high-speed USB device number 2 using ehci-pci
    [ 2.934859] tsc: Refined TSC clocksource calibration: 1397.458 MHz
    [ 3.014908] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 3.014947] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 3.016183] ata1.00: ATA-8: Hitachi HTS547550A9E384, JE3OA60B, max UDMA/133
    [ 3.016190] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 3.016972] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633F, TF01, max UDMA/100
    [ 3.017307] ata1.00: configured for UDMA/133
    [ 3.017807] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54755 A60B PQ: 0 ANSI: 5
    [ 3.019278] ata2.00: configured for UDMA/100
    [ 3.025787] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633F TF01 PQ: 0 ANSI: 5
    [ 3.044649] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 3.044654] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 3.044859] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.044865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.044918] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.061859] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 3.061874] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 3.062232] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 3.084075] sda: sda1 sda2 sda3
    [ 3.085567] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.414041] SGI XFS with ACLs, security attributes, realtime, no debug enabled
    [ 3.528901] XFS (sda1): Mounting V4 Filesystem
    [ 3.710527] XFS (sda1): Ending clean mount
    [ 3.935255] Switched to clocksource tsc
    [ 3.999076] systemd-journald[63]: Received SIGTERM from PID 1 (systemd).
    [ 4.799287] random: nonblocking pool is initialized
    [ 6.377516] systemd-journald[187]: Failed to set file attributes: Inappropriate ioctl for device
    [ 7.417234] ACPI: acpi_idle registered with cpuidle
    [ 7.464892] acpi-cpufreq: overriding BIOS provided _PSD data
    [ 7.544509] wmi: Mapper loaded
    [ 7.612504] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
    [ 7.626522] acpi device:2b: registered as cooling_device4
    [ 7.626631] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input2
    [ 7.700708] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SMBX) (20141107/utaddress-258)
    [ 7.700729] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.734642] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
    [ 7.737166] thermal LNXTHERM:00: registered as thermal_zone0
    [ 7.737173] ACPI: Thermal Zone [THRM] (50 C)
    [ 7.746486] ACPI: Lid Switch [LID]
    [ 7.746714] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    [ 7.746725] ACPI: Power Button [SLPB]
    [ 7.746874] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 7.746880] ACPI: Power Button [PWRF]
    [ 7.749494] ACPI: Battery Slot [BAT0] (battery present)
    [ 7.749951] ACPI: AC Adapter [AC0] (on-line)
    [ 7.755509] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 7.961538] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 8.061752] [drm] Initialized drm 1.1.0 20060810
    [ 8.296521] cfg80211: Calling CRDA to update world regulatory domain
    [ 8.319199] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 8.319231] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 8.320035] r8169 0000:05:00.0 eth0: RTL8105e at 0xffffc90000032000, 38:60:77:69:8f:16, XID 00a00000 IRQ 29
    [ 8.363138] kvm: Nested Virtualization enabled
    [ 8.363151] kvm: Nested Paging enabled
    [ 8.704039] [drm] radeon kernel modesetting enabled.
    [ 8.794078] r8169 0000:05:00.0 enp5s0: renamed from eth0
    [ 8.832358] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 8.832364] AMD IOMMUv2 functionality not available on this system
    [ 8.959092] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
    [ 8.961187] snd_hda_codec_hdmi: unknown parameter 'index' ignored
    [ 8.965010] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card1/input8
    [ 9.031523] media: Linux media interface: v0.10
    [ 9.102014] CRAT table not found
    [ 9.102024] Finished initializing topology ret=0
    [ 9.102177] kfd kfd: Initialized module
    [ 9.102941] checking generic (c0000000 3d0000) vs hw (c0000000 10000000)
    [ 9.102951] fb: switching to radeondrmfb from VESA VGA
    [ 9.103002] Console: switching to colour dummy device 80x25
    [ 9.104030] [drm] initializing kernel modesetting (SUMO 0x1002:0x9647 0x1179:0xFC62).
    [ 9.104059] [drm] register mmio base: 0xFEB00000
    [ 9.104063] [drm] register mmio size: 262144
    [ 9.104144] ATOM BIOS: Toshiba
    [ 9.104219] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
    [ 9.104227] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
    [ 9.104231] [drm] Detected VRAM RAM=512M, BAR=256M
    [ 9.104235] [drm] RAM width 32bits DDR
    [ 9.104379] [TTM] Zone kernel: Available graphics memory: 3821360 kiB
    [ 9.104390] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
    [ 9.104394] [TTM] Initializing pool allocator
    [ 9.104407] [TTM] Initializing DMA pool allocator
    [ 9.104455] [drm] radeon: 512M of VRAM memory ready
    [ 9.104459] [drm] radeon: 1024M of GTT memory ready.
    [ 9.104497] [drm] Loading SUMO Microcode
    [ 9.124664] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 582762
    [ 9.124685] psmouse serio1: synaptics: Toshiba Satellite L775D detected, limiting rate to 40pps.
    [ 9.160285] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
    [ 9.170455] Linux video capture interface: v2.00
    [ 9.179293] mousedev: PS/2 mouse device common for all mice
    [ 9.223473] [drm] Internal thermal controller without fan control
    [ 9.223622] [drm] Found smc ucode version: 0x00011200
    [ 9.223730] [drm] radeon: dpm initialized
    [ 9.266919] [drm] GART: num cpu pages 262144, num gpu pages 262144
    [ 9.282200] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
    [ 9.282345] radeon 0000:00:01.0: WB enabled
    [ 9.282349] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88009b70ac00
    [ 9.282351] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88009b70ac0c
    [ 9.283078] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010f32118
    [ 9.283081] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 9.283082] [drm] Driver supports precise vblank timestamp query.
    [ 9.283084] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
    [ 9.283121] radeon 0000:00:01.0: radeon: using MSI.
    [ 9.283145] [drm] radeon: irq initialized.
    [ 9.298245] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
    [ 9.298931] rtlwifi: rtlwifi: wireless switch is on
    [ 9.299718] [drm] ring test on 0 succeeded in 1 usecs
    [ 9.299728] [drm] ring test on 3 succeeded in 3 usecs
    [ 9.307045] sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
    [ 9.307049] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 9.307053] sound hdaudioC0D2: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
    [ 9.307055] sound hdaudioC0D2: mono: mono_out=0x0
    [ 9.307058] sound hdaudioC0D2: inputs:
    [ 9.307061] sound hdaudioC0D2: Mic=0x18
    [ 9.307065] sound hdaudioC0D2: Internal Mic=0x12
    [ 9.315899] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/hdaudioC0D2/input9
    [ 9.316387] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
    [ 9.316507] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
    [ 9.349814] [drm] ring test on 5 succeeded in 1 usecs
    [ 9.369840] [drm] UVD initialized successfully.
    [ 9.370279] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 9.370314] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 9.524205] rtl8192ce 0000:04:00.0 wlp4s0: renamed from wlan0
    [ 9.769931] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - MP (04f2:b289)
    [ 9.788893] input: TOSHIBA Web Camera - MP as /devices/pci0000:00/0000:00:13.2/usb5/5-4/5-4:1.0/input/input12
    [ 9.789309] usbcore: registered new interface driver uvcvideo
    [ 9.789319] USB Video Class driver (1.1.1)
    [ 9.871399] cfg80211: World regulatory domain updated:
    [ 9.871412] cfg80211: DFS Master region: unset
    [ 9.871417] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [ 9.871425] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [ 9.871431] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [ 9.871436] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
    [ 9.871441] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
    [ 9.871447] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
    [ 9.871453] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [ 9.871457] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
    [ 9.871463] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
    [ 9.890507] [drm] ib test on ring 5 succeeded
    [ 9.911771] [drm] radeon atom DIG backlight initialized
    [ 9.911776] [drm] Radeon Display Connectors
    [ 9.911777] [drm] Connector 0:
    [ 9.911779] [drm] VGA-1
    [ 9.911780] [drm] HPD2
    [ 9.911782] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
    [ 9.911783] [drm] Encoders:
    [ 9.911784] [drm] CRT1: INTERNAL_UNIPHY2
    [ 9.911786] [drm] CRT1: NUTMEG
    [ 9.911787] [drm] Connector 1:
    [ 9.911788] [drm] LVDS-1
    [ 9.911789] [drm] HPD1
    [ 9.911790] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
    [ 9.911791] [drm] Encoders:
    [ 9.911792] [drm] LCD1: INTERNAL_UNIPHY2
    [ 9.911793] [drm] LCD1: TRAVIS
    [ 9.911794] [drm] Connector 2:
    [ 9.911795] [drm] HDMI-A-1
    [ 9.911796] [drm] HPD5
    [ 9.911798] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
    [ 9.911799] [drm] Encoders:
    [ 9.911800] [drm] DFP1: INTERNAL_UNIPHY1
    [ 10.016569] [drm] fb mappable at 0xC0478000
    [ 10.016576] [drm] vram apper at 0xC0000000
    [ 10.016578] [drm] size 5787648
    [ 10.016580] [drm] fb depth is 24
    [ 10.016582] [drm] pitch is 6400
    [ 10.016970] fbcon: radeondrmfb (fb0) is primary device
    [ 10.078763] Adding 8388604k swap on /dev/sda2. Priority:-1 extents:1 across:8388604k FS
    [ 10.143532] Console: switching to colour frame buffer device 200x56
    [ 10.150308] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
    [ 10.150312] radeon 0000:00:01.0: registered panic notifier
    [ 10.164191] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 0
    [ 10.194853] cfg80211: Calling CRDA for country: US
    [ 10.231380] cfg80211: Regulatory domain changed to country: US
    [ 10.231393] cfg80211: DFS Master region: FCC
    [ 10.231397] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [ 10.231406] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
    [ 10.231413] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
    [ 10.231419] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
    [ 10.231425] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
    [ 10.231429] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm), (0 s)
    [ 10.231434] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
    [ 10.231439] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
    [ 10.422003] XFS (sda3): Mounting V5 Filesystem
    [ 10.837256] XFS (sda3): Ending clean mount
    [ 10.899226] systemd-journald[187]: Received request to flush runtime journal from PID 1
    [ 11.195453] microcode: CPU0: new patch_level=0x03000027
    [ 11.195496] microcode: CPU1: new patch_level=0x03000027
    [ 11.195601] microcode: CPU2: new patch_level=0x03000027
    [ 11.195693] microcode: CPU3: new patch_level=0x03000027
    [ 12.465476] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
    [ 13.726328] wlp4s0: authenticate with 00:1e:2a:6f:46:f8
    [ 13.745730] wlp4s0: send auth to 00:1e:2a:6f:46:f8 (try 1/3)
    [ 13.753012] wlp4s0: authenticated
    [ 13.755130] wlp4s0: associate with 00:1e:2a:6f:46:f8 (try 1/3)
    [ 13.758031] wlp4s0: RX AssocResp from 00:1e:2a:6f:46:f8 (capab=0x411 status=0 aid=3)
    [ 13.758283] wlp4s0: associated
    [ 13.758302] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
    [ 23.961417] PM: Syncing filesystems ... done.
    [ 24.305227] PM: Preparing system for mem sleep
    [ 24.310243] Freezing user space processes ... (elapsed 0.001 seconds) done.
    [ 24.311535] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
    [ 24.311542] PM: Entering mem sleep
    [ 24.311898] Suspending console(s) (use no_console_suspend to debug)
    [ 24.320753] wlp4s0: deauthenticating f

    Suspend has always been problematic under Linux. It seems to be hit or miss for the most part, but here are some things you can try:
    Use an LTS kernel, tuxonice, pm-utils, etc. See Suspend and Hibernate
    Try a different graphics driver
    Tweak the driver module parameters or build your own driver.
    Unfortunately I don't have experience with the radeon driver, so I can only give you ideas.

Maybe you are looking for

  • Using multiple delta 1010s in logic

    can't use multiple delta 1010s works fine using one when i select multiple on logic comes through very distorted and then slowly dies. any ideas?

  • How can I find a PDF plug in for Firefox 5 running on Mac OSX (10.6)

    I recently installed an Update and received a message that my PDF Plug In for Firefox would be disabled, but that when the Update had been installed the Plug in would be enabled. This has not happened. I am running Firefox 5 on Mac OSX (10.6)

  • BPM collect messages error

    Hi we are experiencing problems in BPM Collect pattern, error is not clear. Our payload before input to BPM <record> <row> <key>1</key> <val1>1</val1> </row> <row> <key>1</key> <val1>1</val1> </row> </record> this is given to BPM, and BPM is followin

  • A user exit field in CJ20n to display in CAT2.

    Hi; Let me define my problem. I have a field in CJ20n which is created by user exit in the activity level.  The name of the field is "Effort to complete ". I want to show the value of this field in the CAT2 transaction in the "TOTAL" field or in a be

  • Adding Hypertext Link in Flash CS5?

    How do I add a Hypertext Link in Flash Pro CS5? Do I need to use Action script 3 and asign to a button? My website has a text file to add and edit text content. Is there any way to add a Hypertext Link into this text file? Thanks