SD video signal into PP CS6

When recording a SD video signal via fire wire into Premiere Pro CS6,  is the video signal compressed?

Hi Budrick,
The question is not entirely clear - are you capturing from a digital (miniDV, Digital8, etc.) source tape, or from analog source (VHS, 8mm) coming in through a Analog-to-Firewire converter? If DV source, then it is already compressed on the tape, and "capturing" via Firewire is simply transfering the video data from tape to hard drive with no additional compression. If from analog, then what Ann said.
Thanks
Jeff Pulera
Safe Harbor Computers

Similar Messages

  • Integrating External Video Signal into ACP via Mac

    Is there a way to introduce an external video component signal into a live ACP session as opposed to connecting a camera? I'd like to feed video from both a VTR and a three camera broadcast facility, neither of which the Flash settings panel can recognize. I'll bet that there's a solution somewhere. Can anyone offer any advice?

    Try here:
    http://desktop.grassvalley.com/products/videoconversion.php
    aL

  • I'm trying to load video file into CS6 I keep getting error message: 'Could not complete you request because the DynamicLink Media Server is not available.' No Idea what to do next. Help please.

    I'm using CS6 Extended. My OS is "Windows 7 home premium.
    Can no longer load video files into CS6 for edited I keep getting error message:
    'Could not complete your request because the DynamicLink Media Server is not available.'
    Don't know what this means. Until just now I was able to load videos without any problems. Now I'm getting this message. Any thoughts?

    Hi Mylenium,
    upfront:
    I hope I won't be marked as spam now, since I am posting on a few relevant discussions now to this topic.
    However, I really would like to ask the people who have experienced this problem to see if they were able to solve it.
    Now the real deal:
    I posted a question in this discussionDynamicLink Media Server won't let me import video for video frames to layers anymore.
    The linked discussion is a lot younger, which is why I posted there first.
    I also put in information on the steps that I have tried and my computer specifications.
    I am experiencing this problem for a while now and hope you and jones1351may be able to help out.

  • Can i input a Video or Tv signal into my laptop to burn to DVD?

    I Want to know if i can record out of our sky plus box into my laptop and burn to DVD.

    Hi
    As far as I know the Satellite notebooks have not video IN port and you can not watch TV without some external hardware. I have tested it one with my Portege notebook. I have used a external video converter.
    On this way you have video signal at your unit. You can record it (using delivered software with converter) and later create a video DVD.
    Other possibility is not known to me.
    Bye

  • Import MPEG-2 video into PhotoShop CS6

    Does anyone know why I can not import MPEG-2 video file into PH CS 6?

    Hi there -
    Do you have any other Adobe programs installed? Photoshop CS6 can only open MPEG-2 video files if a decoder is installed, such as Premiere Pro or After Effects.
    See this Adobe Help article for more information about supported files types in Photoshop CS6: http://helpx.adobe.com/photoshop/using/supported-file-formats-photoshop-cs6.html
    EDIT: Here is an extremeley technical post about this issue - http://forums.adobe.com/message/4700873
    If you have further issues with this topic, please post in the general Photoshop forum where experts will be able to give you much more specialized help.

  • I can't import videos into Photoshop CS6?

    I just ripped a whole load of Doctor Who episodes, and I have been wanting to make .gifs of them, but every time I try to import them into Photoshop (file > import > video frames into layers (how I normally make gifs)), I get a message saying, "Could not complete the video frames to layers command because the file could not be opened". I don't know why this is happening, because Photoshop normally opens .avi files and all I want is to make .gifs of these Doctor Who episodes.

    You should open your Dr. Who episode in adobe flash or premier pro. Probably you need to covert it. You could use the adobe media encoder. Photoshop cs6 has "intuitive Video creation" and you have to bring in the video as a mp3. I never tried it   As Photoshop is an image editing app and not created to open Video files so you could probbably use Premiere to export the individual frames and then open those in Photoshop.

  • I have imported a video from FCP X and there is no volume when I bring it into AE CS6

    I am importing a video clip form FCPX into AE CS6 and there is no volume. What happened?

    I exported out of FCPX Apple Pro Res 4444  1440 x 1080 vieo and Audio. Then imported into After Effects Pre Set for
    HDTV 1080 29.97 frame rate  1920 X 1080. In the project area it shows the volume etc. When I drag it into the composition no sound.
    Thanks for responding

  • Importing Illustrator files into AE CS6 render lo-res in final output video

    Everything imports, loads, plays and renders from Illustrator into AfterEffects CS6. When I render the final video, the AI files are appearing lo-res in the HD video (1280x720).
    Do I have a lo-res output setting turned on?

    What version of After Effects? Include the minor version number (e.g., After Effects CS5.5 with the 10.5.1 update).
        CS6
    Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
        No, but I don't think this has anything to do with an update.
    What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
        Mac OS X 10.8
    What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".
         Adobe Illustrator CS6 file
    If you are getting error message(s), what is the full text of the error message(s)?
         No errors
    What were you doing when the problem occurred?
         The AI file is not rendering hi-res
    Has this ever worked before?
         No
    What other software are you running?
        Photoshop CS6 and Illustrator CS6
    Do you have any third-party effects or codecs installed?
        No
    Tell us about your computer hardware. Include CPU type and number of processor cores, amount of RAM installed, GPU, number of disk drives, and how any external drives are connected.
         Mac Mini with 8 GB of RAM, 500 GB hard drive, 2.5 GHz duo-core Intel i5
    Do you have any third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU)?
         No
    Are you using OpenGL features in After Effects?
         No
    Does the problem only happen with your final output, RAM preview, or both?
         Preview and final output
    Are you using Render Multiple Frames Simultaneously multiprocessing?
         No
    Screen shot of HD video. Graphic to right of (live action) actor is not rendering hi-res.

  • K9N Platinum, 7600GTOC, SLI, No Video Signal

    Just built up my new system, specs as follows
    MSI K9N Platinum
    AMD 5200X2 AM2 CPU
    2 Gigs Corsair XMS2 DDR800
    2 BFG Tech 7600GT OC's in SLI
    Thermaltake TR2-500 Watt PSU +12V(1) 14A +12V(2)15A
    1 Maxtor 120 GB SATA 150
    1 Maxtor 160 GB SATA 160
    When i turned the computer on for the first time, the system boots up and there is one small beep, sounds like it is posting, but I get no video signal from my monitor, which I checked on my other computer and is working fine, I tried both video cards in the 1st slot, in non-sli mode and I get the same result each time, so I get no video signal with all ways tried? Do I not have enough power in this PSU to run what I have? The video manufacturer suggests a 450W PSU, which I meet, but do I not have enough juice the 12V rails? And would this cause the no signal? Any help would be much appreciated.

    Hello, welcome to forum.
    "When i turned the computer on for the first time, the system boots up and there is one small beep, sounds like it is posting, but I get no video signal from my monitor, which I checked on my other computer and is working fine, I tried both video cards in the 1st slot, in non-sli mode and I get the same result each time, so I get no video signal with all ways tried?"
    have you tried with one of them only into 1st PCI-E? use 1st DVI output, when using SLI, ensure SLI bridge is configured property, connect monitor to VGA onto 1st PCI-E slot. also check monitor output is configured property(etc: Input 1, Input 2).
    power down PC, remove power cord from the PSU and Clear CMOS Guide
    re-test.
    ensure all power cables are connected property. try to boot with one memory stick only into slot close to CPU socket.
    what D-bracket shows?
    "Do I not have enough power in this PSU to run what I have? The video manufacturer suggests a 450W PSU, which I meet, but do I not have enough juice the 12V rails? And would this cause the no signal?"
    yes, think is too weak for your system
    its recommended to get single rail with high amperes on +12V (over 30A)
    read here:
    PSU's---2 x 12v---The Dual Rail Myth
    Is your problem caused by your PSU?
    good suggestion can be found here:
    https://forum-en.msi.com/index.php?topic=105635.msg783148#msg783148
    https://forum-en.msi.com/index.php?topic=103299.msg757739#msg757739

  • Video blank in PS CS6

    Importing mp4 video (out of a GoPro) into Photoshop CS6. It used to work perfectly a few mths ago. I always keep my S/W up-to-date. Now (after various updates) I only get the sound track opened correctly in PS (which seems perfect) but the video is blank. While importing, it doesn't show the long "import video" window with the blue progress strip. The import is fast but video is blank. The timeline is correct for the sound but the blank video strip is usually very truncated. I've tried various ways, dragging the video onto PS icon, using the + sign in timeline etc etc but no action shows the video. Last Fall I edited several videos without a problem. I'm not a big video person but this feature in PS CS6 was very handy.
    I use a MAC Pro (desktop) with 12GB RAM and flush the cache regularly.

    I replied to your post in the main PS forum. No need to use duplicate posts.
    Mylenium

  • Video signal lost on launch of iTunes (after "update")

    I just (foolishly) "updated" to the most recent version of itunes.  And, surprise surprise, a headache has ensued.  I am using a mac mini hooked into a TV via HDMI (the setup is mac mini ---> receiver ---> TV).  After the itunes update, Weirdly, when I launch itunes, the video signal gets lost.  The application appears to start without any problems at first, but 10-20 seconds after launching, my TV goes black.  I've never encountered a problem like this before (I've had my mini hooked to my TV in this setup for some time.)  Any thoughts on how to try to address this issue would be greatly appreciated.  (If only I had this computer on time machine, I would go back an hour and all my problems would be solved.)

    I had the same problem after installing Snow Leopard.
    But now it seems magically fixed after updating to 10.6.2

  • No video signal in

    I am using FCP 4.5 HD, I have a G5, tiger, using a DSR-80 going into the AJA lo la using component, I am firewire into the mac. I get video on my NTSC monitor through the aja but no video into FCP, my device control is aja lo la rs-422, capture input aja lo al composite 10 bit. I get nothing in the preview and when I go to capture now. it tells me "no video signal" any ideas what I am doing wrong?

    am using FCP 4.5 HD, I have a G5, tiger, using a DSR-80 going into the AJA lo la using component, I am firewire into the mac. I get video on my NTSC monitor through the aja but no video into FCP
    So what is it Charisa, Final Cut PRO or EXPRESS?
    http://discussions.apple.com/thread.jspa?messageID=7308988&tstart=0#7308988
    If you are using PRO then what else do you have plugged into your Firewire bus? AJA's external boxes do not play well with others on the same bus. They have to have one all to their self.
    Also, do you have the latest AJA drivers?
    K

  • Analog Video/Audio into G5 Quad via USB/Firewire

    Hello!
    I have a Mac G5 Quad and I already have a capture card installed for my
    Betacam SP deck (it's a Blackmagic Decklink SP card). From time to time I'd also
    like to capture video/audio straight from VHS, DVD and occasionally even
    LaserDisc but I don't want to start disconnecting my Betacam SP-to-G5 cables to do
    this.
    Is there a quality device that would allow me to go from RCA video/audio
    outputs directly into my G5 via USB or Firewire? I've done a bit of research
    online and it appears that the quality of the output video/audio varies greatly
    according to which device one uses.
    Any advice, guidance or recommendations are much needed and most appreciated.
    Cheers!
    Mark Punswick
    Shields Pictures, Inc.
    San Francisco, CA
    tel: (650) 652-6504
    e-mail: [email protected]
    website: www.ShieldsPictures.com

    Canopus 110 or Canopus 300. They will convert the signal into a DV signal and the 300 will even clean it up.
    Shane

  • Input Video Signal to iPad

    Hello,
    I'm planning develop an App to work on business and it has to receive video signal from a DV connection (Firewire IEEE 1394).
    Do you know if is this possible even with an adapter or by developing an external hardware?

    It would take more than just an adapter but rather extensive circuitry to convert a Firewire signal into something the iPad could accept though the dock connector. There's a device that can input analog video:
    http://www.irecord.com/index.html
    but nothing I've seen that will accept video from a Firewire device. Given that an analog converter is possible I could guess that a Firewire converter is at least feasible, but developing one would not be easy.
    Regards.

  • Unsupported Video Signal

    Have a 47TL515 3D tv.  Plugged in a VHS player and it shows the picture fine, but there is an error message on the bottom in a big grey box that reads "Unsupported Video Signal".  How do I get rid of the box?  It won't go away.

    So is this forum to post our issues with new Toshiba products? Do Toshiba support employees even monitor or use this site? Or is it just a place for digruntled users to cry on each others shoulders?
    I may have found a temporary fix to my problem. Was trying to watch another VHS tape with this annoying "Unsupported Video Signal" box on the screen and decided I couldn't take it anymore. I switched the RCA adapter I had plugged into Video 2 with the adapter plugged into Video 1. Switched input so now I was viewing VHS playback on Video 1. Same problem. Big gray Unsupported Video Signal box still there. So I switched them back, so VHS is now plugged into RCA plug adapter in Video 2 slot. All of a sudden the big gray box is gone! And it stayed that way! Was able to enjoy a whole movie without it coming back. And now, a day later, after shutting everything down last night and turning it back on tonight, the big gray box is still missing. Yay!
    Thanks for nothing Toshiba.

Maybe you are looking for