SDA Standard Compliant SD Host Controller
What is the function of a "SDA Standard Compliant SD Host Controller"?
Thanks!
Hi,
I think it conforms to a SD Association standards and is suitable for volume and high speed communication, It is related with card reader driver.
this is an example for the block diagram
Yolanda Zhu
TechNet Community Support
Similar Messages
-
SDA standard compliant SD host controller error
I am getting an error on SDA standard compliant SD host controller and when I try to update the driver it says I have the latest installed, can I uninstall and reinstall the driver?? I have tried everything I can think of and its the only thing left I know
to try, I believe the error code was 30 but I am not positive, I just dont want to do something to mess it up worse! Im far from being computer savvy!!! Any help will be appreciated, thank you.As far as the graphics goes it's well accpeted the only way at present to switch is though the bios manually. There is currently no drivers that enable users to switch from within Win7. Know it's a pain but will just have to wait.
-
Hi,
The USB connection used for connecting to a printer failed. Trying to fix it I removed the Standard USB Host Controller Port_#0001.Hub_#0009 and as a result the device is now marked as "unknown device" with status= error#43.
How can I fix it?
Thanks, Eitan
This question was solved.
View Solution.Thank you for the prompt reply. I have followed the following steps (from Microsoft support forum) but it didn't solve the problem:
Lets reinstall the USB Controllers.
First, please disconnect all USB devices and then perform the following steps:
1. Click "Start" button, type “devmgmt.msc” (without quotation marks) in the “Search” bar and press "Enter". Click “Continue” if necessary.
2. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
3. Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.
All usb driver items restored correctly with the exception of one line that still shows "unknown device", with the following details:
Standard USB Host Controller
Port_#0001.Hub_#0009
Error 43
What else can I do? -
LSI 1394 OHCI Compliant Host Controller driver for Windows 8.1
I have an HP Z600 with a LSI 1394 OHCI Compliant Host Controller and get an error. It is a "This device cannot start. (Code 10) STATUS_DEVICE_POWER_FAILURE error
When Windows 7 is installed, there is no error but with Windows 8.1 running there is this error.
There are no installed legacy drivers that I can use and I have tried many different permutations of driver installs.
Any thoughts?
Thank you in advance.
SalHi:
You may also want to post your question on the HP Business Support Forum -- z Workstations section.
http://h30499.www3.hp.com/t5/Workstations-z-series-xw-series/bd-p/bsc-272#.VIMqRDh0zGg
If you tried manually installing the W7/W8 driver (I have no clue which one of the several LSI drivers listed that you need), then that would have been the only suggestion I could have offered. -
VIA OHCI Compliant IEEE 1394 bus host controller Code 10 & 12
Yesterday I finally got my motherboard so I did a clean XP installation (my first board had a falure). The board is a K8N Neo2. The thing is that after the installation I could see an conflict in device manager.
The device that shows a conflict is my IEEE 1394 bus host controller - VIA OHCI Compliant IEEE 1394 bus host controller.
Yesterday it said: This device cannot start (code 10)
today it says: This device cannot find enough free resources that it can use. (Code 12)
Is ther anyone that can help me to get rid of this problem?try install the lastest edition of via driver
-
1394 OHCI compliant Host controller
ok i have ordered 2 of these boards now. the first i just figured was the board because no matter what i did i got the BSOD and had to heep restoreing for it to work.so i was sent another from best buy who i purchased this from. but now still the 1394 OHCI compliant Host controller will not install . i have tried updateing the software and whatever i can do but it just won't update.
i also get this code in properties
This device cannot start. (Code 10)
msi x58 pro-e
6 gb coisiar 1600 runiing at 1033 for now
xfx xxx radeon 5870 video card
windows 7 ultimate 64-bit
hopefully this is enough info
thank you .I would start to wonder if the reseller sent you back the same board. Two having the exact same issue are remote unless it was related to a bad batch of controllers. One would would think the forum would have had a bunch of threads about it. I take it the firewire device cable has been carefully inspected & the device has been tested in another machine?
Quote
this never worked, i have had this board now for over a year and have yet to have it installed.
A year has passed? It doesn't appear like any magical cure is going to present itself, so RMA looks to be in order. -
M100: Need driver for SD Card Host Controller & IR Port
Hi,
Can someone tell me were I can get the drivers for M100 Secure Digital (SD) Card Host Controller?
I have had a crash on my M100 and have had to rebuild my machine, everything work fine expect the IR Port & SD Card. Can someone tell me were I can get the drivers.
RajHi
Usually the IR port doesnt need any additionally drivers.
It uses a Windows standard driver and you will not find any Toshiba IrDA drivers for this unit. It doesnt exist.
Use this path to install the IrDA driver;
C:\windows\system32
There you should find all Microsoft standard drivers for common devices
PS: All Toshiba drivers you will find here:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp -
How to find the drivers of intel(R) 82801EB USB Universal Host Controller ?
I only find http://binarydb.com/driver/Intel%28R%29-82801EB-USB-Universal-Host-Controller-_-_-24D2-507.html, not find another.
Driver name:
Intel(R) 82801EB USB Universal Host Controller - 24D2
Version:
5.1.2600.2180
Date added:
7-1-2001
Manufacturer:
(Standard USB Host Controller)
Provider:
Microsoft
Update date:
7-1-2001
Device class:
USB
Device GUID:
36FC9E60-C465-11CF-8056-444553540000
Install Id:
PCI\VEN_8086&DEV_24D2&SUBSYS_0C4A8086&REV_02\3&267A616A&0&E8
Inf file name:
usbport.inf
Section name:
UHCI.Dev
Capabilitys:
unknown
Services:
usbuhci
HardwareIDs:
PCI\VEN_8086&DEV_24D2&SUBSYS_0C4A8086&REV_02
PCI\VEN_8086&DEV_24D2&SUBSYS_0C4A8086
PCI\VEN_8086&DEV_24D2&CC_0C0300
PCI\VEN_8086&DEV_24D2&CC_0C03
CompatibleIDs:
PCI\VEN_8086&DEV_24D2&REV_02
PCI\VEN_8086&DEV_24D2
PCI\VEN_8086&CC_0C0300
PCI\VEN_8086&CC_0C03
PCI\VEN_8086
PCI\CC_0C0300
PCI\CC_0C03
Operating system:
Microsoft Windows XP Professional Service Pack 3 (build 2600)
Microsoft Windows XP Professional Service Pack 2 (build 2600)
Microsoft Windows XP Home Edition Service Pack 2 (build 2600)
Occurence:
998 usersThis component is supported by Microsoft inbox INF USBPORT.INF on Windows7, there should be no need for "drivers" for this [very old generation ICH5] component?
Only old OS like WinXP etc would need to have non-inbox INF installed e.g. 82801EB USB Universal Host Controller - 24D2
https://downloadcenter.intel.com/download/14713/Chipset-INF-Update-Utility-for-848-865-875-910-915-925-Chipset-Based-Intel-Desktop-Boards
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
WARNING: Page83 data not standards compliant Promise 7 Disk RAID5
Hello experts.
I've following issue. After an distribution upgrade from Solaris 9 to Solaris 10 11-06 we getting an properly error message in /var/adm/messages.
*genunix: [ID 336213 kern.warning] WARNING: Page83 data not standards compliant Promise 7 Disk RAID5 V0.0*
The OS specs: Release 5.10 Version Generic_118833-33 64-bit
The HW specs: Sun Fire 240 (Firmware OBP 4.16.6 2005/05/09 13:03 Sun Fire V210/V240,Netra 240)
2x SCSi 73 Gb HDD on internal SCSI Controller
Promise VTrack 15100 Raid System with two disks arrays a 1,5 TB on a LSI 1030R Controller
IBM TL 4000 with 2 DLT''s and one roboter on a LSI 1030se Controller.
After firmware update we have the same failure in the /var/adm/messages.
Where can be the failure, i'm a little bit confused about that? I need urgently help.
Thanks in advanced.You may have already got the answer you needed, but here is a little more detail on what is probably happening:
Sun has a function that screens for page 83 SPC-3 spec violations that
was based on SPC-3 rev 14. At that time it roled out , apparently EUI-64 descriptors could only be 8 bytes long. Now 12 and 16 byte lengths are also
supported. Sun should have this in there system as a bug by now. It shoudn't stop anything from working, but is annoying... Opening a call with Sun like the other said would mostly likely get you to this information too. -
IEEE 1394 bus host controller issue.
Each time I boot my system (Tecra A9 S9021V) the IEEE 1394 Bus host controller device driver displays that it is disabled with an error code 22 (this taken from device manager).
From within device manager I manually disable the device, then re-enable the device. The device then displays that is operating correctly. The device driver is displayed as "Texas Instruments OHCI Compliant IEEE 1394 Host Controller". There are 2 files associated with the driver - (1) 1394bus.sys (Microsoft Corporation; version 6.0.6001.18000 longhorn_rtm 080118-1840), and (2) ohci1394.sys (Microsoft Corporation; version 6.0.6000.16386 vista_rtm 061101-2205).
I'm running Vista Business SP1 with all updates/patches.
Is there something I can do to get this device to start up correctly?
Thank you!Tecra A9-S9021V
Each time I boot my system...the IEEE 1394 Bus host controller device driver displays that it is disabled with an error code 22 (this taken from device manager).
What is the exact message that appears when you boot? No paraphrasing.
What did you change about the time this started?
Can you do a System Restore to before the trouble began?
What is System Restore?
-Jerry -
OHCI IEEE1394 DEVICE Host Controller
I have downgraded from vista to windows xp successfully however the OHCO IEEE1394 COMPLIANT HOST CONTROLLER drivers cannot be found, I have installed all Windows Updates including the service packs but still have not been able to overcome the above drivers. Anyone know where I can find the WindowsXP drivers for this? This is the last hurdle on my rollback from the dreaded Vista nightmare but need to complete this install and I am home free. Any suggestons where I may be able to get these from? my laptop is a dv6700 Notebook PC
thanks againI am currently running BIOS F.2B on a dv6426us (ICH7) and NEVER had any problems when I went to a DUAL Boot XPro/Vista ... BUT I did try to install the(fore-mentioned Unibrain) driver (without upgrading the BIOS) and my Firewire Audio device (M-Audio) refused to work/install. I did not mess around with trying to see if a newer BIOS would have been compatible however. Ended up uninstalling and reverting back to distribution driver, but I guess it is worth trying on YOUR hardware. BTW ... that download exe is VERY scary looking until it actually gets running.
Report back your SUCCESS!
Luck,
j -
Exchange 2013 The Microsoft Exchange Search Host Controller service terminates
Hi Folks,
at our Exchange Server ( Version 15.0 (Build 775.38 / 0.1 (8.0.535.0 ) we found over 200k entrys / day saying that:
The Microsoft Exchange Search Host Controller service terminated unexpectedly. It has done this 193270 time(s). The following corrective action will be taken in 30 milliseconds: Restart the service.
The Command:
Get-MailboxDatabaseCopyStatus | fl 'Content*'
shows the following:
ContentIndexState : Failed
ContentIndexErrorMessage : An internal error occurred for the database or its index
ContentIndexVersion :
ContentIndexBacklog :
ContentIndexRetryQueueSize :
ContentIndexMailboxesToCrawl :
ContentIndexSeedingPercent :
ContentIndexSeedingSource :
i investigated a bit further:
RunspaceId : 06d7b8f6-969f-47f8-89ba-87b2fed639bb
Identity : db_1\exch1
Id : db_1\exch1
Name : db_1\exch1
DatabaseName : db_1
Status : Healthy
InstanceStartTime : 14.10.2014 21:03:38
LastStatusTransitionTime : 14.10.2014 21:03:45
MailboxServer : exch1
ActiveDatabaseCopy : exch2
ActiveCopy : False
ActivationPreference : 1
StatusRetrievedTime : 15.10.2014 13:36:52
WorkerProcessId : 2076
ActivationSuspended : False
ActionInitiator : Unknown
ErrorMessage :
ErrorEventId :
ExtendedErrorInfo :
SuspendComment :
RequiredLogsPresent :
SinglePageRestore : 0
ContentIndexState : Failed
ContentIndexErrorMessage : An internal error occurred for the database or its index
ContentIndexVersion :
ContentIndexBacklog :
ContentIndexRetryQueueSize :
ContentIndexMailboxesToCrawl :
ContentIndexSeedingPercent :
ContentIndexSeedingSource :
CopyQueueLength : 0
ReplayQueueLength : 0
ReplaySuspended : False
ResumeBlocked : False
ReseedBlocked : False
MinimumSupportedDatabaseSchemaVersion : 0.121
MaximumSupportedDatabaseSchemaVersion : 0.126
So i read that the Database is OK, but the Index is broken somewhow ?
I`ve read somewhere that i should delete the GUID Folder and restart the Hostcontroller service, can somebody explain HOW to do this ? where can i Find the GUID Folder ? Is it the correct way to solve this problem ?
thx in advance!Hi,
after i removed the suggested Folder, i disabled both "Microsoft Exchange Search service and Microsoft Exchange Search Host Controller service, than i restarted the Exchange Server.
After that i restarted both services.
Sadly nothing has changed, hostcontroller.exe is still crashing:
The Microsoft Exchange Search Host Controller service terminated unexpectedly. It has done this 153 time(s). The following corrective action will be taken in 30 milliseconds: Restart the service.
The sequence is like this:
First the Search controller starts:
Search HostController Starts: Service started successfully.
After that the hostcontroller crashes:
.NET Runtime: Application: hostcontrollerservice.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: Microsoft.Ceres.HostController.Controller.HostControllerException
Stack:
at Microsoft.Ceres.HostController.WcfServer.WcfService.StartService()
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart()
Than we get this Application Error:
Application Error:
Faulting application name: hostcontrollerservice.exe, version: 16.0.775.0, time stamp: 0x5211bea8
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16864, time stamp: 0x531d34d8
Exception code: 0xe0434352
Fault offset: 0x0000000000047b8c
Faulting process id: 0x2a08
Faulting application start time: 0x01cfe90eb249f511
Faulting application path: C:\Program Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\HostController\hostcontrollerservice.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: f2351e08-5501-11e4-940b-00155d203202
Faulting package full name:
Faulting package-relative application ID:
So if anybody can help - feel free! -
USB Host Controller not recognized by Windows 7.
Just installed Windows 7 in a1130n desktop. The USB Host Controller and the Std USB Host Controller are not recognized by the operating system. The USB ports and the media memory ports on the front panel will not work.
My HP Z400 is suffering from the same problem. Did you discover a solution?
-
USB 3.0 host controller and USB Root Hub xHCI not showing up on Windows 8.1 laptop
Greetings and thank you for taking the time to read the following message and 'maybe' attempt to help me with my current plight...
I have an HP envy m6 laptop running Windows 8.1 and Windows 7. The problem i am facing at current is that i have only 1 out of 4 usb ports working on my Windows 8.1 partition however on my Server 2012 partition, all four ports are working fine. After asking
around i have come to the conclusion that i'm having a driver issue. I compared what was present on the Windows 7 USB controllers (in Device Manager) to what was present on the Windows 8.1 controllers and i found that my Intel(R) USB 3.0 extensible host controller
- 0100 (Microsoft) and my USB Root Hub (xHCI) was missing on my Windows 8.1 partition.
Now for some background....the problem first occurred when i was trying to solve an external hard drive issue in which none of my external hard drives where showing up when i plugged them into my usb ports, i came across an online solution telling me to
uninstall all my USB drivers in device manager, restart the laptop and let the computer re install the drivers automatically, the result was that i only had 1 out of 4 ports working. Could someone please point me in the right direction in order to fix this
problem?Windows 8 has native USB 3.0 drivers which explains why you are not seeing an option to roll back. I do not believe you can make the Windows 7 driver work. Have you tried uninstalling in the device manager all usb items and then rebooting to let the drivers reload? Do that with the computer off the dock and then plug it into the dock. As a general rule you should not do driver updates to a laptop through a docking station.
-
After an undate for the Intell USB 3.0 Host Controller (extensible) as a WIN 8 driver update my DynaDock does not work properly for any devices using the USB ports on the dock and connected to any USB port on the HP Envy 4-1043 laptop. Reading everywhere I can find anything it seems that there is a problem with the Microsoft or Intel driver for the USB 3.0 Host such that the USBs work find when things are plugged directly into them. BUT, when the dynadock is pluuged in and any of its 6 USB ports are used the devices either cannot be found or behavior extremely sluggishly.
This Dynadock has worked well with my last 4 HP computers and worked fine under WIn 7 and 8 on this Envy until the last update of the driver.
I do not know how to re-install the old driver (Hps' WIN7 version sp56724. Can someone please give me the steps or refer me to a source to do this properly?
There is no roll back option in the device manager for this driver. It is grayed out.
I have take pride in not experimenting with 'brihg tiddeas' of how to fix things on this machine. Not that 99% of my gut plus resources from help pages and Miscrosoft did not work before. I do not have a backup computer anymore and I cannot afford the lost of time and productive in making a mess and then spending days trying to undo and fix something that I know others have done well.Windows 8 has native USB 3.0 drivers which explains why you are not seeing an option to roll back. I do not believe you can make the Windows 7 driver work. Have you tried uninstalling in the device manager all usb items and then rebooting to let the drivers reload? Do that with the computer off the dock and then plug it into the dock. As a general rule you should not do driver updates to a laptop through a docking station.
Maybe you are looking for
-
VI Name conflicts with "Open VI reference"
I am using LabView RT, where an application loads LLBs at runtime: 1- The user creates/compiles a LLB containg a VI that is loaded at runtime later 2- The user renames the contained VI to an enumerated name so that all names are always unique 3- The
-
Day link in calendar not working properly
Hi i created a calendar region with an sql query like select date_column,display_column , link_column from table and in Day link : Target : Page on this app set these items : P11_DATE_ITEM with values #date_column# to redircet to page 11. But when i
-
Make WRT54G an Access Point Only
I need to make my WRT54G an access point only. I tried information contained on Linksys site, but I can't seem to get it to work. I can access my wireless router and disable DHCP fine. But when I try to change the wireless routers IP, I'm instructed
-
Portal URL un-accessible suddenly
Hi Gurus, We have implemented Portal on HP-UX platform with oracle DB. Recently we are facing a issue where in Portal URL become ub-accessible all of a sudden. While I checked the process through jcmon all of them shows up & running. Ultimate solutio
-
I have a MAC Book Pro And when I try to download the trial I get a screen that starts but never finishes : ( Any help appreciated greatly!!