SDCARD reader Read-Only

I have a 2012 Macbook Pro 13inch 2.5 GHz, 4GB Ram, 500GB HDD. Upgraded to Yosemite 10.10 and was looking to put Magic Lantern on a Canon camera, so I put the SDHC card in the card reader only to find that it sees the card as read-only. The lock button is in the off position (meaning it should be able to read and write to the card).
Have reset both the SMC and PRAM to no avail.
Just curious if I missed something with the 10.10 update. I have tried two different cards: One is an SDHC and the other not. Any help or guidance would be appreciated.

Never reformat a camera's memory card using your Mac — always reformat the card or delete pictures from it using your camera's menu commands, not the Mac. A card that's been formatted on a Mac or had pictures added to or deleted from it by a Mac is likely to be found unusable by many cameras. Reformatting in the camera usually resolves that problem.
As for your card being seen as read-only by the Mac, that's not a drawback if you adhere to the practices I've recommended above. But if you want to use an SD card for something other than uploading photos from your camera to your Mac, then it's a pain, and the problem ha been reported here a number of times before. For some people, inserting the card very fast into the SD slot has remedied the problem. Others have found that they need to push the card slightly upward, downward or to one side or the other while inserting it, rather than just pushing it straight in. Still others have found that certain cards' locking sliders bind against the side of the slot and get pushed into the locked (read-only) position as the card is inserted. You can experiment with all these ideas and see what happens, but in some cases just switching to a different brand of card has been the answer. And while it's irksome to contemplate resorting to a USB card reader when you have what ought to be a perfectly good SD reader built into your computer, for some people that has been preferable to relying on an unreliable SD slot.

Similar Messages

When I try open a .pdf file my Adobe Reader 11 only allows the download / save opening the related window and don't show me both options 1) open with ... and 2) save as.... probably someone flagged the choise... always perform this way ....

When I try open a .pdf file my Adobe Reader 11 only allows the download / save opening the related window and don't show me both options 1) open with ... and 2) save as.... probably someone flagged the choise... always perform this way ....
Could some one give help and let me know where I can probably find the settings option that allows me to change and switch to previous situation where it was possible to decide time to time how to proceed either opening the file or saving it ??
Thanks in advance
David

What is your operating system?
Open a PDF from where? If online, in what browser?

How to Publish on the Web a PDF document in Reading mode only

Hello,
I'm planning to post on my web site my manuscript in PDF format. I would like to make it available in a reading mode only.. I wonder if ADOBE LIVECYCLE Rights Management would allow me to do so in a safe manner. What would be the cost?
Thanks.
PATEGA

Thank you for your reply.
De : Test Screen Name
Envoyé : 15 septembre 2014 05:51
À : Gaétan Patenaude
Objet : How to Publish on the Web a PDF document in Reading mode only
How to Publish on the Web a PDF document in Reading mode only
created by Test Screen Name <https://forums.adobe.com/people/TestScreenName> in Adobe PDF Pack - View the full discussion <https://forums.adobe.com/message/6730511#6730511>

Does only Adobre Reader "reads" the fields of a PDF when created with Acrobat?

I created a PDF with several fields and exported it.
Then I tried to open it with Firefox and the fields didn't appear.
But it works OK with Adobe Acrobat.
Does only Adobre Reader "reads" the fields of a PDF when created with Acrobat?

Adobe software reads form fields. The rules for how to do form fields are a part of the PDF standard (a book available to anyone) but some companies ignore it and others do half a job. To be safe, use only Adobe Reader. And beware of browsers that ignore Adobe Reader even if you have it.

How to hide save button / read mode only in browser adobe viewer?

Currently I embed a pdf to my website , the problem is, I would like to show the read mode only instead of a full tool bar to the visitor , also , I would like to hidden the save file option .
I checked there is an open parameter in the offical document that can specific
toolbar=1&navpanes=0&statusbar=0&messages=0
However, can I specific what opition is allow in the toolbar (actually I would like to allow only zoom function )
Are there any way to doing this? Thanks.
<object id = 'zoomPage' type='application/pdf' data= '" + sourceFolder + "/2013/08/17/0/0/A/Content/pdf/pdf_" + currZoomPageNo + ".pdf#toolbar=1&navpanes=0&statusbar=0&messages=0'><p>The PDF can not display</p></object>

Much of the documentation for Acrobat JavaScript has not changed and still operates exactly as it did with Acrobat 3.1 so it is possible that the old documentation is still valid. I have found that the Acrobat JavaScript Guide fro
version 5 has some very excellent documentation about the field object UI for the various form Fields.
If one goes to the Acrobat Developer Center and uses the Working with Distiller, Fonts and more and the uses the PDF Open Parameters one gets the documentation from the version 9.0 SDK form June 2008. This document probably has not been updated since then. Another issue to consider is the changes in IE, the number of new web browsers, and the introduction of HTML 5 all of which could change how parameters are passed or allowed. This technique has always been problematic.
Within an external viewer, it is not possible to show/hide the toolbars.
app.toolbar

"Reader" will only display a PDF for one second, then suts down the PDF.

I recently had an automatic update to "Reader" and now "Reader" will only display a PDF for about one second, then shuts down the PDF. This happens to all PDFs no matter what the scource. I am running Windows 7. What do I need to do to correct the situation. (Yes -- I deleted "Reader" from my computer, the re-installed it. Didn't help.)

Go to C/Programs/Adobe/Reader 11/Reader.
Look for a file named eula.exe (or just eula).
Double click it.
Accept the license agreement.
Reader should work fine from there.

Read access only

Dear Viewers,
When I am trying activate the funds management under the node
SPRO->Public sector management->Funds Management Government->Actual and Commitment Update/Integration-> Activate/Deactivate Funds Management.
Read access only
Message no. SV044
Diagnosis
You have attepted, in change or transport mode, to access data which
cannot be changed. This data can only be displayed.
System Response
The system has rejected the requested processing mode and switched to
display mode.
Procedure
You can either acknowledge the message to display the data, or cancel
processing.
Can I get any solution to solve this issue?
Thanks
Aswin

Dear expert
Please check this:
sm30 :View V_T001_FMACT should have 'Maintenance status' set to 'Read and
Change' instead of 'Read Only'.
This table is defaulted to Read only in the standard system
You can make this change through SE11-maint. status here you can change
Regards
Ajeesh.s

I updated my iCal like Apple wanted me to. Yet it erased all of my events! and it tells me iCal is read mode only. ***.

I updated my iCal like Apple wanted me to. Yet it erased all of my events! and it tells me iCal is read mode only. What can I do to re-install my events?

valhalla1967,
Let us know if MobileMe: Using Mac OS X Leopard v10.5.x with the new MobileMe Calendar helps solve your problem.

X Reader open only as admin

Hello,
I'm using Acrobat Reader on a XP machine in a SBS 2003 Domain. Reader 9.X worked fine, but Reader X makes problems.
When I work as a local administrator everything is ok. If I work as a normal user (without install permission) the reader opens only for half a second and then closes again.
Does anyone have a suggestion what is wrong.
Thanks in advance.

is it anyway similar to another problem reported on forum?
http://forums.adobe.com/thread/754445

Unable to read "read/write" OPC tags through datasockets

I am having problems reading tags from an OPC server that are "read/write" access. Reading "read-only" tags works good. I am using the Datasocket Open.vi and Datasocker Read.vi and I have tried to set the mode input of the Datasocket Open to "read/write" follow by a Datasocket Read without any success. I am constantly getting the 1179 error as return.
I have tried to read the same tags with an OPC Client software and it works fine.
Anyone that have successfully read a "read/write" OPC tag using Datasockets?

Are you watching these variables in another program as well? I have seen this error pop up before when variables were on the watch list and variable manager was open. Make sure you have nothing else grabbing the resource at the same time.
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video

Need official interpretation - java.io.Reader read(char[] cbuf) method

Hello Everyone,
I need Sun API's official interpretation on java.io.Reader read(char[] cbuf) method;
Say, I provide this read method a char[] of size 8096, could the implementing class return even before reading into the whole buffer array? Say, the implementing class just reads 1024 chars and return 1024 as the method output, has the implementing class fulfilled its obligation?
In my mind, the read method should attempt to read and fill the buffer array until of course i/o error occurs or end of stream is reached? See BufferedReader source for this type of implementation.
Or could the read method just attempt to read into the buffer (with no obligation) and can return before completely filling the buffer?
Sincere Regards.

This is the situation: (and we are caught in between arbitrating on whom to ask to make the fix)
Please note that I am not taking any names here, but remember these vendors are the biggest in their market.
Vendor Db A has an API wherein it returns a stream and its length;
Vendor B consumers this API via the java.io.Reader class as follows:
char[] data = new char[(int) VendorAStream.length()];
VendorAStream.read(data);
Vendor B contends that per java.io.Reader API, it is responsibility of Vendor A to implement the read method correctly!!! (which is to read the data completely, not partially); Vendor B further contends that their code works fine with all the other Db vendors (except Vendor A); [Quite *tupid reasoning in my mind ;-) ]
Vendor A says per java API, we can partially fill the buffer (they are specifically only reading 1024 chars from the stream)
Initially, I thought, Vendor B must fix the code to handle partial reads. But no where it is mentioned clearly that Reader.read only attempts to read the chars and can return before filling the buffer.
Dannyyates,
(*My interpretation*) The reason it says "*maximum* number of characters to read" is for the situation when end of stream is reached before fully filling the buffer. In that case, the length of buffer and number of actually chars read wont match. This explanation covers for your observation (c)
BIJ001, No problem in your explanation. I understand and I am merely pointing you to alternate interpretation of the API.
Please comment. Thanks for your time to discuss this.
Sincere Regards.

Question for Reader.read() !

When I read the documentation for Reader.read(), I am not sure if I understand it right or not.
public int read():
Read a single character. This method will block until a character is available, an I/O error occurs, or the end of the stream is reached.
Depends on what it saying, I think when read() is called, it will always move its cursor to the next, read next character, if it is possible.
Am I right? Any code to prove that? I am trying to do it in my own, if I get it, I will post to here too.

Yeah you're right.
If you use a Reader to read from a file (FileReader), then only three events can happen :
1) there is another character availbale, so read() reads it and moves the cursor to the next character.
2) there are no other character in the stream, so the function returns -1.
3) there is a problem with the file system and an IOException is throwed.
So you can read a file without creating a new thread. In this case, read() never blocks. But there are other sorts of Readers.
For exemple, the PipedReader reads its data from a pipe. The pipe you read from can be empty but will generate no exception or end of stream events. In this case, read() will block until data is available. In most case, you will need to create a new thread to read from a pipe without blocking all your application.
So the answer about wether read() block or not depends in fact of the actuel Channel used, and you need to read the documentation of each of these Channels (FileReader, PipedReader, etc...).
Hope this helps.
Matthieu

TTS not working (in Babylon or Foxit reader read out loud or adobe reader read out loud)

Hello
Text to speech in applications(such as Babylon or Foxit reader read out loud
or adobe reader read out loud) that use it does
not work.
Do not get any error, but when play would have no sound.
I think this problem
has caused the program system mechanic pro,
It changed the registry.
My OS is win 8.1 64 bit
really need this functionality, please
help me.

Extremely grateful
for answer.
I try foxit reader support,
but they could not help me.
I think the problem
is related to Windows.
I previously didn't have any problem with these softwares.
Why all three software(adobe reader, babylon, foxit) disabled at the same time?

How to know theis a space or carrier return when java read read a text file

Hi,
Please help.
How to know theis a space or carrier return when java read read a text file.
for example a text like this:
5
<---how to let tell java they is a space here
item1
item1
item1
item1
item1
<---how to let tell java they is a space here
item2
item2
item2
item2
item2

hi!
The reason is that. I want to use java for loop to read each part of value. for example: first part is the items name. After the space (I need to tell java when this is a space here and its need to skip) , following by the items prices in double value and space again (need to skip also) and etc.
item name1
item name2
item name3
item name4
item name5
<--- here is the space to skip and another loop to read following items prices
item price1
item price2
item price3
item price4
item price5
<--- here is another spcae again. and so on
Thank in advance for your help.
jet

What is correct way to make a PDF reader, read the page numbering? (for accesibility in indesign 5.5

What I have to do to make the reader read pdfs page numbering is in the page layout in InDesign CS5.5?
I read that unlinking the numbering of the page layout and then including it in panel articles with the other elements. Is it true?
Is this the way?
thanks

But page numbers do defenitively not belong to the text structure, neither do running headers and footers. As far as I understand these items are disturbing when reading pages.
I am not blind and neither peronally I don't know any. But I suppose there are other means as reading marks for them as page numbers.

How do I search scanned documents that Adobe Reader reads but shows 0 results from the search?

How do I search scanned documents that Adobe Reader reads but shows 0 results from the search?

If the scanned document was not processed for OCR, then it is just an image and cannot be searched for text.

SDCARD reader Read-Only

Similar Messages

Maybe you are looking for