SDCCN not available in Netweaver 7.0 system

Dear All,
im configuring EWA for my satellite system.one of my satellite system using Netweaver 7.0. there is no SDCCN in my NW system. can you help me, to get tcode SDCCN in my NW system?
Many Thanks

Hi,
Have you tried using transaction SDCC to activate the new SDCCN.
You can also navigate via the IMG to activate the SDCCN transaction for the system if this helps?
Regards,
-Rohan

Similar Messages

Tcode SDCCN not available.

Dear All,
is there any way to activate tcode SDCCN in netweaver.7.0 system. bcos it not available, should i activate something, to get SDCCN tcode available in netweaver 7.0,
Please help me..
Regards,

try the below link for more information on your query, it might be useful
Re: unable to create a service in SDCCN
Regards,
Sumit

Bluetooth not available error

I got a early 2008 MAC PRO with additional wireless keyboard and mighty mouse few weeks ago.
Recently I keep encountering the "bluetooth not available" problem after software update (system reboot) if I have USB devices attached to the MAC PRO. Also, if I connect the Logitech quickcam ultravision directly to the MAC PRO, the bluetooth will have "not available" error after system reboot. If I connect the quickcam to the USB HUB, the problem won't happen.
This error happened again when I install the new Safari update while I have the keyspan USB-to-Serial connected to the MAC PRO.
I have all the latest updates installed in my MAC PRO. I don't know what happened, but I hope this problem can be fixed so that I don't have to keep unplugged all my USB equipment if I need to reboot my MAC PRO.

Hi there,
I just had the exact same thing happen! I had my usb 2 flash stick and MyBook 320HD only. I then noticed that the MyBook wouldn't sleep even though the Mac was shut down. I had to force shut off the drive by removing the power lead. I restarted the Mac with no usb whatsoever and voila! All is now ok.. I wonder if this is connected with the motherboard power management??

The requested resource (/ciscopca) is not available

I am trying to acces the mailbox via web url and getting the error
The requested resource (/ciscopca) is not available
using cisco unity connection
System version: 8.0.3.23031-1

David,
I had it at 1024 and I bumped it up to 2048 and now it works.
Thank you very much!
Jim

The secLDAP security plugin is not available.

some of my clients when they logon to Infoview
get the following error...
The secLDAP security plugin is not available. Please contact your system administrator for details
The authentication mode is Enterprise. Windows/AD/LDAP all are unchecked (disabled).We are currently using BOE XI R2.
This happens when user logins and authenticates to a different intranet site and then tries to login to Infoview. If the user comes and launches infoview, they doesn't encounter this issue.
Any help in this regard would be greatly apprciated.
Matt

you should post a new thread but that error is very generic, it could be anything. When posting try to add as many details about your workflow.
It may be best to open an incedent with support. At this point it could be workflow, config, bug, external config, anything really..
Also post in the [Admin forum|BI Platform;
There should be much LDAP expertise there.
Regards,
Tim
Edited by: Tim Ziemba on Aug 26, 2008 10:01 PM

Sharing grayed out; admin overview shows not available

My Xserve has suddenly stopped allowing "sharing" in Workgroup Manager, and in Admin, the overview shows "Not Available" in all areas including System Start Time.
All volumes are available over the network but one of them is not showing up even in the finder, and will not show an icon on a user machine.
Any ideas?

Try restarting the AFP service in Server Admin

Data sources not available

hi all,
i am installing the cube 0fiap_c03.when i am looking into the master data attribute(DATA SOURCES) for objects 0DUNN_BLOCK ,0DUNN_KEY, 0PMNT_BLOCK, 0PYMT_METH, 0SP_GL_IND in RSA5 they r not available.
but in my bw system the info sources r there for those objects.how can i resolve this issue.where to find them.
i need ur suggestions on this regard.
thanks in advance
sri

For those objects some one might installed all the infosources.
regarding datasources for those objects, check whether the required pathes are installed in r/3 side.
Message was edited by: vsn

System Landscape directory not available error,

I am still a beginner, and I am having some slight trouble understanding, what tools would be needed, and how to install. I am using the forums.
We have the MII Discovery Server up and running.
NWDS Server installation is done.
We have the MII track ready to be used for Development(SLD URL is available) , Userid and password available
I am working on installing the NWDS 7.3 Developer Workspace.
Would I also need to do NWDS Server install on my laptop?
Would these steps be sufficient?
1. Download and install JDK 1.6
2. Copy the file nwds-extsoa-7.3-SP00-PAT0000-win32.zip from:
<your download location>\51039309\DATA_UNITS\JAVA_IDE\distros\com.sap.netweaver.developerstudio.distribution.complete.extsoa\8.30.0.101020102100
to a convenient folder.
3. Extract the content and you will have a folder with name eclipse.
4. Launch the Netweaver Developer Studio from folder eclipse, you may want to create a shortcut on the Desktop.
5. If you haven't maintained JAVA_HOME property or if it's pointing to some other java version, eclipse will complain about it. In the dialog window locate the JDK 1.6 installation. Path to JDK 1.6 should be something like
C:\Program Files\Java\jdk1.6.0_25\bin
6. Restart the NWDS after this and select a suitable workspace.
7. Set the run time engine in NWDS, by going through the menu path:
Window->Preferences->SAP AS JAVA
Question:
1. I am unable to Set the run time engine in NWDS, please could you give me details steps with what I would need to enter for Instance Hostname and Instance Number...etc
2. As part of Development installation do I have to Modifying the Logon Page? Do I have to go thru the Server installation in order to start developing on eclipse environment?
I do not have the war file. How do i Copy the war file tcsecumelogonui.war from
<Installation drive>:\usr\sap\<SID>\J00\j2ee\cluster\apps\sap.com\com.sap.security.core.logon\servlet_jsp\logon_ui_resources\tcsecumelogonui.war
3. System Landscape directory not available error,
In the Component Browser when I right click and select New u2013 Development Configuration u2013 Import From System Landscape Directory (SLD) u2013 Next (Enter UserID and Password)
Thank you

Hello,
For the SLD error, please, configure SLD following as per this docuemtnation:
http://help.sap.com/saphelp_nw04/helpdata/EN/bb/c2b6421a75da11e10000000a155106/frameset.htm
Regarding the settings to enter NWDS to connect to AS Java, you have to enter the java instance data so that NWDS can connect to it in order to make deployments, etc....
Please, see also the following documentation that explains stp by step how to work with NWDS.
http://help.sap.com/saphelp_nw04/helpdata/en/fe/a3996fa314f94f8a0c3475b08636d0/frameset.htm
I hope this helps you.
Regards,
Blanca

Getting error while opening a saved for later notification: The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action.

Hi All,
While opening a saved for later notification, we are getting "The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action". error.
This is a custom notification.
Please help.
Thanks
Raghava

HI All,
Please help on this issue.
Thanks
Raghava

Mozilla quits when I login to Yahoo Mail. I read on a forum that I need to delete npYstate.dll from Yahoo/Shared directory. This .dll is not available in that folder on my system. Strange???

I read in one of the forums that I need to delete the npYstate.dll file from the Yahoo/Shared directory but this file is not available in this directory on my system. Mozilla still continues to quit when I log in to Yahoo mail.......
== URL of affected sites ==
http://www.mail.yahoo.com

Yup, it just copies all the information on that page to your Windows clipboard, for you to paste anywhere (email, text file, etc.).
http://en.wikipedia.org/wiki/Clipboard_%28software%29

Error Message: "Skype can not start because the system is not available"

Try to reset all Skype settings. Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old. Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder. Restart Skype. N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

Okay!
I'm newbie here, but it doesn't matter. I dont want to do here anything else, just write off my opinion about the Microsoft's "new" Skype, and I hope they will read...
This is a cropped image - of course hungarian, because I'm hungarian, but I think many of us could see this as well. How this is possible? "The Skype can not start because the system is not available" *** What kind of system? The Skype was on a P2P system, where is impossible that the system is not available! This is why the skype was much better than the Microsoft's messenger. Then they bought it, and make it wrong...
I found a solution for this problem, this can happen if my client is not updated. But IT IS!
How does it works? Can we use the **bleep** Skype how we would like to use? Or this time we need to find an other application (like Viber), and using that while they not buying that as well, just because that is better?
Edited to conform with the Community Guidelines
Subject/title edited to better reflect post content.

Error "Object 'DM' (APCO) of type 'Application' is not available in version 'A'" while transporting process chain to production system.

Hi Gurus,
Whenever I try to transport a process chain ZFI_0FIGL_C10 from dev. to qua. & prod. the error “Object 'DM' (APCO) of type 'Application' is not available in version 'A'” is displayed in the end of creating transport package.
The process chain was created to load data to 0figl_c10 and it works all right on all systems (dev. qua. prod.).
The process chain contains processes for:
- starting the process chain
- executing infopackage (for loading data to 0figl_o10),
- ACR (activate data in 0figl_o10)
- delete index 0figl_c10
- DTP loading data from 0figl_o14 to 0figl_c10
- executing infopackage 80FIGL_O10
- creating index in 0figl_c10
- building DB statistics
- rolling up aggregates in 0figl_c10
- deleting of requests from the changelog 0figl_o10
- deleting of requests from PSA (0fi_gl_10)
How to find what cause that error.
Regards,
Leszek

Hi,
A SAP consultant told me to ignore that error.
Indeed, after creating transport with some new process chains (again I was informed about that error "APCO ...") and transporting it to production everything works all right.
The problem is described in sap note: 883745.
Regards, Leszek

RSAR2318 : IDoc type for source system T90CLNT090 is not available

Hi all,
I am working on BI + ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
1. Error:
R7I028
Object could not be activated
2. Error:
RSAR238
IDoc type for source system T90CLNT090 is not available
Error when creating the export datasource and dependent objects
Error RSAR238 : IDoc type for source system T90CLNT090 is not available
I have already checked trx & dtps, but could not find resolution.
Kindly help me with this error.
Thanks and regards,
MS

M Sharma wrote:
But how exactly can I create when T90CLNT is not active? Help please.
Yes, you would need to check with BASIS team how they have created an alternate source system (for debugging) & prepare a RFC b/n these systems. Can you just check the settings in the source system and BI source system...and check the source system for the same BI system. Right click > Check and then do a restore or take the help of basis to fix it. What I think is a possible solution is : RSA1 > Source system > Search System > Right Click > Activate

RSAR238 : IDoc type for source system T90CLNT090 is not available

Hi all,
I am working on ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
1. Error:
R7I028
Object could not be activated
2. Error:
RSAR238
IDoc type for source system T90CLNT090 is not available
Error when creating the export datasource and dependent objects
Kindly help me with this error.
Thanks and regards,
Dhanapal

Hi,
Check the same in SDN..
Object ZDUMMY could not be activatedMessage no. R7I028
Re: DSO Activation problem
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/test-cases-for-module-human-capital-management-1425016
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/idoc-type-for-source-system-t90clnt090-is-not-available-message-no-rsar238-1431565
Thanks
Reddy

I cannot do a software update, I get as far as System Updates then when I choose it a message appears say "Check for update is not available at this time" but I have not had a system update for a good while now. I am on System version 6.16.211.XT912.Ve

I cannot do a software update, I get as far as System Updates then when I choose it a message appears say "Check for update is not available at this time" but I have not had a system update for a good while now. I am on System version 6.16.211.XT912.Verizon,en,US

Which phone model?

SDCCN not available in Netweaver 7.0 system

Similar Messages

Maybe you are looking for