SDDM 3.3.EA2 one xml file for each table?

Dear Philip!
We'd like to have xml-files for all of our tables. To be more precise one xml file for each table so we can check it in in our configuration management system (CCC Harvest)
Is it possible to write such a transformation script and, I really believe that can be done, can you please point us in the right direction, how to do that?
Thanks in advance
Guenter

Hi Gunter,
if you want each table to be stored in separate XML file then you needn't to do anything. Each table is stored in separate file in design directory structure - foreign keys are not included, each FK is stored in separate file.
The ID of the table is used as file name. Each table has presentation in each physical model so you'll find file with same name (table ID) in each physical model.
Please elaborate on that if you want something else.
Philip

Similar Messages

  • How to dpwnload one XML file for each report row

    Hi all,
    i have a report on the products table with about 1000 rows
    desc of table products
    product_id varchar (10)
    product_desc varchar2 (2000)
    I would like to download on the file system an xml file for each row of the report
    the nane of each xml file = <product_id>.xml
    thanks in advance
    km

    Hi,
    You would probably find it better to search on the PL/SQL forum as this is more their area than Apex.
    From what I can see in there (and there are a number of examples that would help you), you need to do something like:
    DECLARE
    vPATH VARCHAR2(50) := '/DEV';
    vFILENAME VARCHAR2(50);
    vFILE UTL_FILE.FILE_TYPE;
    BEGIN
    FOR C IN (SELECT PRODUCT_ID, PRODUCT_DESC FROM PRODUCTS)
    LOOP
      vFILENAME := C.PRODUCT_ID || '.xml';
      vFILE := UTL_FILE.FOPEN(vPATH, vFILENAME, 'W');
      UTL_FILE.PUT_LINE(vFILE, '<xdr>');
      UTL_FILE.PUT_LINE(vFILE, '<product_id>' || C.PRODUCT_ID || '</product_id>');
      UTL_FILE.PUT_LINE(vFILE, '<product_desc>' || C.PRODUCT_DESC || '</product_desc>');
      UTL_FILE.PUT_LINE(vFILE, '</xdr>');
      UTL_FILE.FCLOSE(vFILE);
    END LOOP;
    END;I haven't included exception handling etc and you should check on the PL/SQL forum to see if there are better examples!
    Andy

  • Different data-sources.xml files for each build

    Any thoughts on how to do this:
    I have two sets of data-sources. When I deploy the EAR to my stage box, I need to go to the "stage" data source of the other repositories. When I deploy the EAR to my production box, I need to use the production data sources for the other repositories
    I am using jdev 10.1.3
    There is a single data-sources.xml file - where, currently, I am manually editing the connection strings between deployments.
    I am using ant to build the EAR file.
    What is a more elegant way to do this?

    Use ANT script to build the EAR file.
    Have 2 different data-sources file one for production and one for stage.
    Based on the environment you want to deploy tell ANT to copy those files into the EAR.
    Just a suggestion.

  • Mutiple mapping XML files for one datasource

    One of our projects raised the following question. Any help would be greatly appreciated.
    "Can we have mutiple ToplinkMappings.xml files for one database? The reason we are looking at it is, our toplinkMappings.xml file size is keep growing in size(right now 2.2MB), we are getting into issues while comparing with the previous versions. The PVCS diff tool and beyond compare tools are not able to interpret the corresponding blocks of code on both the versions properly."
    Haiwei

    Hi Haiwei,
    Yes, you can have multiple deployment.xml files in a session. Take a look at Configuring Multiple Mapping Projects.
    --Shaun                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Help in creation of XML file for IDOC postings

    Hi All,
    Need help if anyone has knowledge/experience in creating XML files for IDOC processing.
    We need to design an input file (in XML format) for creation of IDOCu2019s for purchase Invoices through Interface.
    We have an existing input file, which is working correctly.  We are trying to modify this existing input file for a new Tax Code (Non-deductible inverse tax liability).   This tax code is working fine for manual postings.   But, through IDOC, tax postings are not correctly triggering.
    Could you please confirm if any one has experience on this, so that I can share more details for resolving.
    Thanks & Regards,
    Srini

    Hello,
    you can use CALL TRANSFORMATION id, which will create a exact "print" of the ABAP data into the XML.
    If you need to change the structure of XML, you can alter your ABAP structure to match the requirements.
    Of course you can create your own XSLT but that is not that easy to describe and nobody will do that for you around here. If you would like to start with XSLT, you´d better start the search.
    Regards Otto

  • How do I import one xml file into 3 separate tables in db?

    I need to utilize xslt to import one xml file into 3 separate tables: account, accountAddress, streetAddress
    *Notice the missing values in middleName, accountType
    sample xml
    <account>
    <firstName>Joe</firstName>
    <middleName></middleName>
    <lastName>Torre</lastName>
    <accountAddress>
    <streetAddress>
    <addressLine>myAddressLine1</addressLine>
    <addressLine>myAddressLine2</addressLine>
    </streetAddress>
    <city>myCity</city>
    <state>myState</state>
    <postalCode>mypostalCode</postalCode>
    </accountAddress>
    <accountId>A001</accountId>
    <accountType></accountType>
    <account>
    I need the following 3 results in 3 separate xml files in order for me to upload into my 3 tables.
    Result #1
    <rowset>
    <row>
    <firstName>Joe</firstName>
    <lastName>Torre</lastName>
    <accountId>A001</accountId>
    <row>
    <rowset>
    Result #2
    <rowset>
    <row>
    <addressId>1</address>
    <city>myCity</city>
    <state>myState</state>
    <postalCode>myPostalCode</postalCode>
    <row>
    <rowset>
    Result #3
    <rowset>
    <row>
    <addressId>1</addressId>
    <addressLineSeq>1</addressLineSeq>
    <addressLine>myAddressLine1</addressLine>
    <row>
    <row>
    <addressId>1</addressId>
    <addressLineSeq>2</addressLineSeq>
    <addressLine>myAddressLine2</addressLine>
    <row>
    <rowset>

    Use XSU to store in multiple tables.
    "XSU can only store data in a single table. You can store XML across tables, however, by using the Oracle XSLT processor to transform a document into multiple documents and inserting them separately. You can also define views over multiple tables and perform insertions into the views. If a view is non-updatable (because of complex joins), then you can use INSTEAD OF triggers over the views to perform the inserts."
    http://download-west.oracle.com/docs/cd/B19306_01/appdev.102/b14252/adx_j_xsu.htm#i1007013

  • XML file for SEPA Credit transfer

    Hi All,
    I am working in ECC 6.0. The system was configured to generate XML files for credit transfer as per SEPA guidelines. The files are being created in the application layer. But the line length is being restricted to 255 characters. As per the specifications of a XML file in apllication layer. all information should be contained in one single line.
    Secondly the job log for the payment medium creation program contains the below mentioned line among others -
    "Incorrect Print Parameter" of message class "0K", message no. 091and message ID I
    Can anybody tell me what is going wrong?

    HI,
    Can you please help me in solving the issue when using the PMW format SEPA_CT.
    My co. code currency is EUR and when paying the invoice which is in GBP i am not able to get the currency EUR in the DME file generated by the payment run instead I am getting the currency GBP.
    As per the SEPA concept evey payment will be in EUR irrespective of the currency in which the invoice is raised. So please let me know what needs to be done to get the local currency EUR amount the DME file for the payment made against invoice raised in GBP...
    Thanks in Advance..
    Regards
    Sanjeev

  • XML file for GigE Vision camera

    Hello,
    I am working on a design of GigE Vision camera. It should be very simple linescan camera. I implemented the whole required GigE Vision register set, can communicate with the camera in MAX. The problem is that I need to creata this XML file for the camera.There is this XML file here: 
    http://www.emva.org/cms/upload/Standards/GenICam_D​ownloads/SFNC_Reference_Version_2_0_0_Schema_1_1.x​...
    What should I do with it? My first version of the camera will have 2 funcions: turn it on and turn it off I am bit confused, because the xml file template has lots of functions, that I don't really need. Should I delete them? Or leave inside with default values? What does minimal configuration XML file need?
    Regards,
    Linus
    Solved!
    Go to Solution.

    linru wrote:
    Thank you very much! Perhaps I was too concentrated on digging through various documents and missed the important info.
    And one more question: how does NI software build the *.icd file? By reading XML file? Or by reading registers in my camera? 
    Both. The XML is processed by the GenApi software component which then translates it to register operations. The XML file thus controls what features are visible based both on the XML file as well as the camera registers (features in the XML may be conditionally available based on the <pIsImplemented< tag). Next, the IMAQdx ICD file contains the subset of features in the XML file that are available and are tagged as <Streamable>, meaning they can be saved to a settings file.
    Eric

  • How to generate an XML file for an animation of IK armature

    Can someone please tell me how to generate an XML file for an animation of IK armature.
    I have a 5 keyframe/16 frame animation of a human character made up of a series of moveiclip symbols that is animated with an IK armature.  I need the XML information from the animation. 
    When I go to Commands > Export Motion XML I get the error message "There is more than one object on frame 1" and then nothing happens.
    Thank you,
    c

    I hope that's not the case.  I want to write to adobe about it.  I think it's a great feature and it functions really well even though it is not a very developed IK tool.  My biggest issue with it is ouput options and integration with motion tweens.
    I have seen a lot of examples of animators using it online, just no one talked about output.  I just feel it hasn't been developed.  It can generate a sprite sheet but only for a single pose frame of the animation, and not all the key frames or pose tweens.  I find that functionality quite odd, as if adobe just forgot about IK when added in sprite sheets, etc. and the reason it half works is just an accident.

  • Problems with mapping after bundling messages into one XML-file

    Hi all,
    Case 1: one DebMas IDoc ==> XI ==> one XML-file : no problems with mapping.
    Case 2: several DebMas IDoc's ==> XI ==> one XML-file : problems with mapping.
    Explanation:
    Incoming DebMas IDoc's:
    Businesspartner 1 : no Customer Master Partner Functions (E1KNVPM).
    Businesspartner 2 : Customer Master Partner Functions (E1KNVPM).
    Businesspartner 3 : Customer Master Partner Functions (E1KNVPM).
    Businesspartner 4 : Customer Master Partner Functions (E1KNVPM).
    After bundling into one XML-file:
    Businesspartner 1 : no Customer Master Partner Functions (E1KNVPM).
    Businesspartner 2 : no Customer Master Partner Functions (E1KNVPM) !!!!
    Businesspartner 3 : Customer Master Partner Functions of Bp 2 (E1KNVPM) !!!!.
    Businesspartner 4 : Customer Master Partner Functions of Bp 3 (E1KNVPM) !!!!.
    All the payloads of the IDoc's are correct.
    In the message mapping we use a Container for the Partner Functions (shown as below)
    Is this a serious bug in the mapping of SAP XI ?
    Does anyone knows how to solve this serious problem.
    E1KNVVM -
    > Partner_Container
    E1KNVPM -
    > Partner
       PARVW -
    > ParnerRole
       KUNN2   -
    > PartnerNumber
    Regards,
    Theo Pijlman

    Hi,
    Example:
    Input idoc has field F1 with occurence 0..unbnd
    My input values for field F1 is
    1
    none
    2
    3
    Say, I have a mapping, F1---->TargetF1
    In the target only 3 TargetF1s will be created for the values 1,2,3 and nothing will be created for the field F1 with no value.
    To overcome this, use collapse contexts.
    F1->collapsecontexts>TargetF1
    This way, the TargetF1 fields created will have the following values:
    1
    blank
    2
    3
    Collapse contexts makes sure that a target is created, even if there is a context change specified at the source.
    Hope this is clear.
    Regards,
    Smitha.

  • Loading multiple tables from one xml-file

    I've got one xml-file containing information which should be loaded into multiple database tables. How can I do that?

    Please use XSLT to tranform to XML file with XSU recognized format and separated for different table input.
    You may refer to Example in book "Building Oracle XML Applications".
    null

  • Populating XML file for form set

    Hi there,
    We have several forms that we need to fill out with the same information for each "case" we deal with. Its the usual stuff like names, dates and addresses.
    At present we fill out each form one at a time - very repetitive.
    I want to have a underlying xml file populate each form.
    This presents a few questions:
    1. We don't have a database to populate the underlying xml file. What would be a good way to have the user enter this xml data? In addition to entering the xml data it needs to be store in a different folder each time (there is a folder for each case) and
    the dialog box (or whatever) needs to be able to accommodate a different number of people associated with different cases. Some might have 4 people some might only have two.
    2. Then a template, which could be one big document with each form.
    These goals maybe able to be done entirely within word, but I look forward to suggestions on this!
    Regards,
    -Al

    Hi,
    Thank you for posting in the MSDN Forum.
    Since the issue is more relate to the end-user, I'd like to move it to Word IT pro forum.
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
    Thanks for your understanding.
    Best regards
    Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to include one xml file into another

    Dear Sir/Madam!
    Could you do me a favour and help me to solve the problem like this:
    I have one xml file wich describe the common thins of the GUI, and the another will be generated depending on the point the user has selected.
    I would be very pleased for any helpful assistance.

    <?xml version="1.0"?>
    <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
    <xsl:output method="xml"/>
    <xsl:template match="/">
    <xsl:variable name="xml1" select="document('xml1.xml')"/>
    <xsl:variable name="xml2" select="document('xml2.xml')"/>
    <xsl:copy-of select="$xml1"/>
    <xsl:copy-of select="$xml2"/>
    </xsl:template>
    </xsl:stylesheet>

  • Generate XML file for payroll result

    Hi,
    I tried to generate XML file for chinese payroll result by t-code: pu12, but i can not find the interface format for china payroll(here is format for other country vesion like international, france...). How can i generate xml file for chinese payroll result. DO i need to create a format type? Is there any other way? thank you in advance.

    Coming back to my question is it really possible to generate bigger XML on 9i.
    Sure. But not in one go.
    I would use SQL/XML functions instead and paginate the result set so that each CLOB chunk doesn't exceed 4GB (or less). Each chunk could then be appended to a file using UTL_FILE.
    Alternatively, as Oracle 9i supports parallel pipelined functions, you could also imagine doing the job in parallel using automatic data partitioning on an input ref cursor.
    That would require some postprocessing steps to rebuild the entire file from the different chunks though.
    See : Pipelined and Parallel Table Functions

  • Can we keep one action file for all jsp files in struts?"

    I have 5-6 Jsp pages and all are inter connected.
    If any one make changes, these changes should be display in the database.
    In this case, I need only one Action class which can hold or manipulate all changes from all jsp pages. I am not sure "Can we keep one action file for all jsp files?"
    If yes, then how can we configure struts-config.xml file.
    If no, then pls suggest me any altenative solution.

    hai
    go for DispatchAction class and then pass as parameters
    refer struts complete reference...
    it will solve ur problems..

Maybe you are looking for