"SDHC card cannot be ejected because FCP X is using it. Quit FCP X and try again".

Whenever I import AVCHD clips from my SDHC card (connected via a card reader) and then try to eject it I get this message.
Up to now I have simply quitted FCP X to eject it but there must be a quicker and more elegant solution?
How?

Incidentally I have read a suggestion to use the "eject" symbol/button in the camera import window but after using it the card remains stubbornly on the desktop and a further attempt to eject it normally or drag it to the trash  brings up the dreaded warning message again.
I've even tried Disk Utility with the same lack of success.
OK, it only takes 20 seconds to relaunch FCP X but it should not be necessary.

Similar Messages

  • HT1539 I am getting an error that my Disc cannot be found, may be dirty, etc...  Please reinsert and try again.  After retrying, I cannot download, as the redemption code indicates that it has already been used.  How do I download movie now?

    I am getting an error that my Disc cannot be found, may be dirty, etc...  Please reinsert and try again.  After retrying, I cannot download, as the redemption code indicates that it has already been used.  How do I download movie now?

    Thanks for the quick advice!
    Unfortunately, I am still unable to open my core productivity apps, namely Skype and Evernote. Twitter, as well, could not start. But interesting quick fix though, I never knew you could do that.
    Here's the error log after the restart:
    What else should I try?

  • Got a new iphone5 and cannot log into iMessages keep getting same message to check network connection and try again.  Tried changing password as suggested but nothing is working

    Got a new iphone5 and cannot log into iMessages keep getting same message to check network connection and try again.  Tried changing password as suggested but nothing is working any suggestions?

    Are you connected to wifi, or doing it over cell signal?

  • M ipod is daisabled and requires a connect to itune, but when i plug it in to the computer a pop up appears that says itunes cannot access this ipod because it has a passcode Type in the pascode and try again. I cant type in the pascode so any suggestions

    Can anyone help? This was a birthday present for me and it's only about a year old.

    Connect it in recovery mode using the instructions in the Apple support document below.  This will allow you to bypass the passcode.
    http://support.apple.com/kb/ht1808
    B-rock

  • ITunes cannot connect to iTunes Store. Make Sure Your Network is Active and Try Again.

    Hi,
         Every Time i open itunes, i get this error message. I know that i am not connected to internet, but some how i want to remove that error message. It's kind of pain in brain. Because when i work on other application, sometime's i want to listen songs, so i just press shortcut key(play/pause key) from keyboard to open the itunes, but everytime i have to click on the error message. So please if anyone knows how to avoid that error message or try itunes not to connect to itunes store automatically. Then please tell me how to do that.

    Did you find a resolution as I'm having same problem?

  • You cannot signed in at this time please check your mobile network setting and try again..

    Please help me i can't login in skype...my phone is android the brand is oppo and the model is joy plus...my problem is i can't login in skype...when ever i login it's always says YOU CAN'T SIGNED IN AT THIS TIME PLEASE CHECK YOUR MOBILE NETWORK SETTING AND TRY AGAIN......please help me...somebody who can help me...please what will i do?

    Hi! We tested the issue on HTC ONE M8 device and couldn’t reproduce the issue ourselves. Did you experience the issue while you logged in the first time after installing Skype on your device? Could you please give more details about this issue – exact steps how to reproduce that, Skype version number, exact OS version, network type? You can find more details about specifics we need to know from here: http://community.skype.com/t5/Android/How-to-create-a-good-Android-issue-report/td-p/211384.

  • When i try to update it shows, "the path blah blah blah cannot be found. verify you have access to this location and try again, or try to find the reinstall package "itunes.msi"...?

    "The path cannot be found. Verify that you have access to this location and try again, or try to find the installation package "itunes.msi" in a folder from which you can install the product itunes." this is all I see whe i tried to update or uninstall itunes. Why?

    A search of the forums or google would reveal many other threads with the same issue, troubleshooting steps, and resolutions.
    Try helping yourself before asking others to help you.

  • Suitable SD and SDHC Cards for Capturing Video for FCP?

    Not exactly an FCP topic but this is the only forum that comes anywhere near!
    Until a few weeks ago I assumed that all SD and SDHC cards were equal with regard to capture speeds.
    Now I know better and have discovered that for trouble-free (consumer) video capture you need a Class 6 card to be safe.
    I note that SD cards (by definition 2GB or less) have no speed classes.
    I have trawled the internet, including the SD Card website but can't find any mention of the reason for this.
    Is this because small SD cards are very fast or simply because nobody would conceivably use them for video?
    I am asking because I have a small stock of 2GB cards which, if possible, I would like to use for short videos in the near future.

    I've not used FCE so can't add anything there. Perhaps Tom W will drop by. He would know.
    Regarding the VHS footage. You really ought to think about using a Time Based Corrector (TBC) between your VTR and the digitizing device. They will help deal with mis-timed frames (the 'tearing' effect) as well as chroma shift.
    The Canopus ADVC-300 is the least expensive one I've seen and as an added benefit, it does the Analog/Digital conversion for you as well.
    Good luck.
    x
    Do your part in supporting your fellow users. If a response has been Helpful to you or Solved your question, please mark it as such as an aid to other lost souls on the forum.
    Also, don't forget to mark the thread Answered when you get enough information to close the thread.

  • HT1351 Whether or not I sync items on iTunes to my ipod, I cannot eject the ipod because a message keeps coming up and saying that my ipod cannot be ejected because it contains files that are being used by another application. How do I fix this?

    I just got an ipod classic 7th generation a couple days ago and I'm having a heck of a time with it. My latest problem is that with media on iTunes, I cannot eject the ipod because it says that it cannot be ejected because it contains files that are being used by another application. What application is this, and what do I do about it?

    Hi newipoduser,
    Here are some possible solutions:
    Do you use musicmatch jukebox on your computer? If you do, you have to go into task manager on windows and end process mim.exe. It interferes with disconnecting ext devices
    Empty your "trash/recycle bin."
    If that doesn't work, try quitting all your programs, especially music-type programs, basically things that look for mp3's etc.
    if that doesn't work, "log off" then "log on" and that should refresh/purge your OS system.
    Finally, you can restart your computer.
    Hope one of these helps!
    Cheers,
    GB

  • "The iPod cannot be ejected because it contains files that are in use..."

    My iPod (20 gb, 4 gen) syncs fine, but when I go to eject it a window pops up saying "the iPod cannot be ejected because it contains files that are in use by another application."
    Unfortunately, there are no files on it (that I know of) that are being used by another application.
    I can't use the eject function on the task bar because I have Vista and it will corrupt the iPod. I've just been unplugging it with out ejecting, but was hoping there was a solution. Any advice?

    Are you running any anti-virus or spyware detection software in the background? Start closing programs located in the taskbar next to the clock and try ejecting the iPod.

  • The Ipod cannot be ejected because it contains files that are in use by ano

    When I want to eject my Ipod i get this message:
    The Ipod cannot be ejected because it contains files that are in use by another application.
    After I had put some songs on the ipod, i got that message. I thought maybe the new songs were the problem but de computer still doesn't want to eject my Ipod and there are no programes in use other than itunes.
    Does anybody know what to do???!!!
    greetings Mandarijn

    hi Mandarijn!
    The Ipod cannot be ejected because it contains files that are in use by another application.
    by any chance, do you have McAfee ActiveScan security software on that PC? i've seen that implicated a few times with this message.
    if you do have McAfee, as an experiment try switching that off prior to doing a sync. do you still get the message then?
    if the McAfee thing doesn't-help/isn't-relevant, let's try using the following techniques to see if we can identify if some other program is causing the message. (the article is actually about installation errors, but the techniques are relevant to this sort of investigation.)
    Close Applications Running in the Background
    love, b

  • The ipod cannot be ejected because it contains files that are in use by another application

    I am using my crusty but trusty 5G iPod with my new rMPB, and things have been working as expected for the month or so that I've had the new laptop. But "recently," (past few days?), when I go to eject from iTunes (current - 11.1.5), I get the error message, "The iPod cannot be ejected because it contains files that are in use by another application." The iPod is then ejected but the "Do not disconnect" message remains on the iPod screen. I can continue using the iPod as normal after all this.
    If I eject the iPod from the Finder, I get no error message but the iPod screen still remains at "Do not disconnect."
    I tried plugging it into my Windows 7 PC (did not reformat of course!) and then ejected it, and the iPod screen returned to its proper state after a proper Windows disconnect.
    I have of course restarted my Mac and reset the iPod (Up + Center buttons held for ~5 sec) but no change. I don't remember changing the OS that would cause this - any suggestions as to the problem here?

    Hello, cgtyoder. 
    Thank you for visiting Apple Support Communities. 
    Try resetting the iPod and power cycling your Mac to see if this message disappears.  If the issue persists you may need to restore the device to factory settings.  The article below will walk you through both these steps.
    How to reset iPod
    http://support.apple.com/kb/ht1320
    Cheers,
    Jason H.

  • HT1351 Whenever I try and eject my iPod from iTunes after it is done syncing a box pops us that says "The iPods' 'Owners iPod' cannot be ejected because it contains files that are in use by another application".

    Whenever I try and eject my iPod from iTunes after it is done syncing a box pops us that says "The iPods' 'Owners iPod' cannot be ejected because it contains files that are in use by another application".iTunes is the only thing open on my computer so I don't understand what this could mean.  If anybody could help me out that would be great. Thanks

    Hello, cgtyoder. 
    Thank you for visiting Apple Support Communities. 
    Try resetting the iPod and power cycling your Mac to see if this message disappears.  If the issue persists you may need to restore the device to factory settings.  The article below will walk you through both these steps.
    How to reset iPod
    http://support.apple.com/kb/ht1320
    Cheers,
    Jason H.

  • Nano Error - The iPod cannot be ejected because it contains files that...

    I am receiving the following message from windows -
    The iPod cannot be ejected because it contains files that are in use by another application.
    Thus far I have
    reset me iPod, restores my iPod, uninstalled and installed iTunes. I have also removed Music Match Jukebox.
    Any help is appreciated.

    hi annicajess!
    The iPod cannot be ejected because it contains files that are in use by another application.
    let's try an experiment. first, let's check to see if the wee darling will disconnect properly if you switch off your antivirus and antispyware prior to an attempt at an eject.
    if you're still getting the message, let's try steadily switching off background applications prior to attempts to eject (the following article is actually about installer errors, but the technique is the same for this sort of thing):
    Close Applications Running in the Background
    can you identify which application is causing the problem?
    keep us posted.
    love, b

  • HT1386 After downloading music to my Playlist, when I try to sync the music to my IPod, it gives the error (The IPOD cannot be ejected because it contains files that arer in use by another application.  What does this mean?

    After downloading songs to my Playlists, when I try to
    sync the music to my IPod, an error msge says
    "The IPod cannot be ejected because it contains
    files that are in use by another application".
    What does this mean??

    - Terminate the sync
    - Reboot the computer
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try again. If still problems try:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP\
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Maybe you are looking for

  • When Ripping CD, iTunes Displays Wrong Artist & Wrong Album

    Thanks for looking at my post! When I try to rip a CD, iTunes thinks it's a different CD. Even when I change all of the song tracks, artist, and album name . . . I can't change the time. Of course the two CD's have different song lenths, so the songs

  • Can not access Viber messages, photos & videos after making restore from iTunes backup

    Hello Viber Team, I have sent several help requests about my Viber issue but I did not receive any reply from anyone at viber's support team. It's highly seems the new viber app v5.1 which released on November 18, 2014 for iOS devices has a bug which

  • How to display Preferences in the context menu of an iView

    How do I display the 'Perferences' of an iView in it's context menu (in the iView tray)? I need to expose the Layout Set of the iView currently being looked at - for our content maintainers only. Are commands or command groups involved? Thanks

  • Integration CRM 7.0 with ERP 5.0

    Hi, I want upgrade my actual system CRM to 7.0, what about the integration with my system ERP 5.0? Are there any document for know the functionality that should work and not work? Thanks in advance, Regards,

  • Can´t change EPCF Level to 0

    Hi experts, Iu2019m trying to change de EPCF Level value to 0 at framework light properties, but when I test the page I can see that the change wasnu2019t applied. At the html source code I have: EPCM.relaxDocumentDomain(); EPCM.init( { Version:6.080