SDHC card issues

Hi I recelntly re-installed Arch on my Dell 1525 laptop. Earlier the built in SD card reader worked. Im not sure if I explictly need to install a driver for this.
output of uname -a
2.6.36-ARCH
output of lspci
02:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
02:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
02:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
02:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12)
I checked /var/log/everything.log and this is what i see
Dec 28 20:07:35 ===========================================
Dec 28 20:07:35 choma-laptop kernel: mmc0: Timeout waiting for hardware interrupt.
Dec 28 20:07:35 choma-laptop kernel: sdhci: ============== REGISTER DUMP ==============
Dec 28 20:07:35 choma-laptop kernel: sdhci: Sys addr: 0x00000000 | Version: 0x00000400
Dec 28 20:07:35 choma-laptop kernel: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
Dec 28 20:07:35 choma-laptop kernel: sdhci: Argument: 0x000001aa | Trn mode: 0x00000000
Dec 28 20:07:35 choma-laptop kernel: sdhci: Present: 0x01ff0000 | Host ctl: 0x00000001
Dec 28 20:07:35 choma-laptop kernel: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
Dec 28 20:07:35 choma-laptop kernel: sdhci: Wake-up: 0x00000000 | Clock: 0x00004007
Dec 28 20:07:35 choma-laptop kernel: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
Dec 28 20:07:35 choma-laptop kernel: sdhci: Int enab: 0x00ff00c3 | Sig enab: 0x00ff00c3
Dec 28 20:07:35 choma-laptop kernel: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000001
Dec 28 20:07:35 choma-laptop kernel: sdhci: Caps: 0x00c02120 | Max curr: 0x00000040
Dec 28 20:07:35 choma-laptop kernel: sdhci: ===========================================
thanks for reading
Vikram

Also, not sure if this will help from the System Profiler.
USB Reader:
Capacity: 16.07 GB (16,068,378,624 bytes)
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Product ID: 0x1307
Vendor ID: 0x1976
Version: 1.00
Serial Number: 110074*765
Speed: Up to 480 Mb/sec
Manufacturer: ChipsBnk
Location ID: 0xfa140000
Current Available (mA): 500
Current Required (mA): 100
Partition Map Type: MBR (Master Boot Record)
S.M.A.R.T. status: Not Supported
Volumes:
NO NAME:
Capacity: 16.06 GB (16,064,184,320 bytes)
Writable: Yes
BSD Name: disk2s1
<Edited by Host>

Similar Messages

My HP Pavilion Elite m9058n PC's Card-Readers Stop Reading/Recognizing My SDHC Cards

Just about 2 weeks ago my HP Pavilion Elite m9058n PC's card readers stop reading or recognizing my memory cards used to store the pictures I took. They used to be able to read my SDHC cards (Sandisk, Kinston, Panasonic) before. Don't understand why they stop reading, even recognizing all of them. My O/S is Windows 8. The initial symptom was the options for processing the inserted cards seemed to be showing up slower than before and then I had to withdraw the cards and re-insert them so that such option screen appear. Then later on it didn't show up at all. And when I checked "This PC" ("computer" or "my computer" in other Windows versions), I didn't see the DRIVE LETTERS, like G, K, or J, etc. for the memory card readers any more. Now if I connect my camera directly with my PC, I see on the camera model number on "This PC" screen.
Please help me understand what this problem is and kindly provide me with the best solutions you can.
Thank you very much.

Hi,
I understand your card reader is not working as you have previously experienced. Take a look at the following document, Using and Troubleshooting Memory Card Readers (Windows 8), specifically the "Resolving issues with memory cards" section. Hopefully there will be something in there that is useful for you. Best of luck. Have a wonderful day.
Ryan1216
I work on behalf of HP
The advice and opinions given here are my own and not those of HP

Elements 9: Have lost ability to load in new photos from my SDHC card - "No program associated"

Folks
First post in this Forum, hope you can help!
When I insert my SDHC card, I no longer am able to import photos from the card into Elements. I get the AutoPlay window OK......
Auto Play -> Organize and Edit with Adobe Elements Organizer 9.0
however when I click t he Adobe Organizer link, I get:
"This program does not have a program associated with it for performing this action. Please install a program or associate an action .... "
It worked fine for the past 18 months! I upgraded to Elements 9 about 6 months ago, no issues until recently. I am guessing some WIndows update has broken this. Any suggestions? how can I fix?
(I am using a Dell Sudio 17 PC with Windows 7 64 bit installed). I have Adobe Elements 9 and Premiere Elements 9 installed (and not a lot else to be honest)
Many thanks!
Stephen

Hi
thanks again for replying. Sorry for taking a long time to get back to you, however I decided to reinstall. And I only just got time to do the reinstall
Unfort your suggestion didn't make it work! It just brought up the dialog automatically with the message ""This program does not have a program associated with it for performing this action. Please install a program or associate an action .... ""
Reinstalling didn't help either - which realy surprised me. I had expected that some program that had installed had disrupted the configuration somehow, that cause this failure message to occur. And I hoped that re-installation would correct this. However as I say the same behavior still happens, even after the reinstall
I have also tried to change jpg file association to Elements Organiser .... again no change. (This not what I want btw - I want elements photo uploader to be invoked when I insert the SDHC card - this is a different requirement from opening a JPEG direct into Elements)
So I think this is an Auto Play issue, not a file association issue.
I have tried changing the control panel defaul programs etc - however it all looks fine to me e.g. the default action for media insertion (memory card) is "Organize and Edit with Adobe Elements Organiser 9" - specifially under "Change Autoplay Setting" this item is shownb correctly. The issue (still) seems to be that the OS cannot map this to an actionable program.
As before, any solution/insight appreciated!
Thanks once again, 99jon, for your prompt responses and apologies for not getting back to you asap last time
Stephen

New Curve not recognizing an 8gig micro SDHC card

Hi - I am totally new to the BB and to this forum. Here's my dilemma - I just bought and "installed" an 8gig micro SDHC card last night. The phone does not recorgnize it. First when I went to take video, it told me to install a formatted card. When I try to format, I get the message "Media Card Format Failed". I have tried many times, checked on how it looks in it's spot behind the battery, etc. Everything else seems OK. Any help??
Thanks much.

friki wrote:
What I can deduce from my experience is that one should not buy a SDHC card if you've got a curve 9300 or 9330 phone. Even if the SP tell you the model is compatible with the technology, blackberry specs only mention that SD cards are accepted
http://worldwide.blackberry.com/blackberrycurve/3G/curve_specifications.jsp
Hello,
Sorry...but wrong. The only difference between SD and SDHC is the capacity of the card. SD goes up to 2GB (officially...some have labeled themselves SD but go to 4GB). SDHC goes from 4GB to 32GB. HC simply stands for "High Capacity." More information is available in the Wiki:
http://en.wikipedia.org/wiki/Secure_Digital
So, while the BB specs may only say "SD", they must include SDHC since they further indicate the capacity of Media Cards that various OS levels support:
KB05461MicroSD card sizes supported by the BlackBerry device software
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My hp dm3-3027cl card reader can not recognize the class 10 sdhc card

My hp dm3-3027cl card reader can not recognize the class 10 sdhc card. I downloaded and installed the card reader driver from HP web site for this dm3-3027cl, but still have same problem. There isn't a problem on class 6 SDHC card. It seems some other computers have the same problem on reading the class 10 SDHC card. My toshiba e105 laptop has no probblem to read class 10 SDHC card.

Hello snowman90024 and welcome to community,
Kindly install the USB and card reader driver then install cardreader driver and USB driver
Please let us know about the status after this.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

IMac not recognising Sandisk 16GB SDHC card

Hello everyone
having real difficulty downloading to iMovie content from my Canon Vixia HF100. The Sandisk VideoHD card I purchased will not under any circumstances be recognised by my iMac running 10.5.5. I even purchased a dedicated SDHC reader, but still to no avail. The only way, and then after much messing about, to get the video off the card is to directly connect the camera to the computer.
Has there been any issues with this card that anyone knows of? Should I go back to a standard 16GB SDHC card?
Thanks in advance for any assistance.

"The only way, and then after much messing about, to get the video off the card is to directly connect the camera to the computer."
That is the recommended procedure.

HP Photosmart C3180, is there a driver that will enable this printer to read sdhc cards

HP Photosmart C3180 all in one printer. is there a driver that will enable this printer to read SDHC cards.

This is a limitation of the USB hardware on the C3180 which will not read SDHC cards.
Maximum recommended memory card size: 1 GB (solid state only)
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

HP Pavilion dv6 card reader won't detect some SDHC cards

Notebook Hp Pavilion dv6-6104so
Windows 7 - 64 bits
The notebook's card reader won't detect some of our SDHC cards. We have updated the driver to the latest version, Realtek PCIE 6.1.7601.90, and the BIOS, but it still won't recognize some of our cards.
We have six SDHC cards, three SanDisk (4, 32 and 32 GB), two Kingston (8 and 8 GB) and one Integral (4 GB). The card reader recognizes four of them (4 and 32 GB SanDisk cards and one of the two Kingston cards). What is strange and that you may have already noticed is that the card reader recognizes only one of two cards with the same brand and capacity!
About the two cards that don't get recognized in our notebook, they work properly in their corresponding cameras and are detected without problems by another HP Pavilion dv6-3138so notebook card reader, as well as by two netbooks of ours from two different brands.
When we connect the cameras (one Canon and one Sony, both point-and-shoot) to the computer via a USB 2.0 cable, the laptop detects the cameras and through them we can access the cards.
We purchased the laptop less than two weeks ago in Helsinki, Finland.
Thank you in advance for your help!
This question was solved.
View Solution.

Hey Everyone,
Using a high capacity card in a standard card reader slot will cause this issue. Im going to guess that the cards you ar having issues with are the SDHC cards and not the standard SD cards. As Naoto stated, by using a camera as a card reader you an workaround this. You can also look into SDHC card reader adapters. Here is a good article on the SDHC cards: http://goo.gl/lj5Fq
Hope this helps!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Unable to Detect SDHC Card on Windows 7

Hi guys, recently I received a 4 gb sdhc card but when insert the card into the card reader & plug to the usb port, win 7 was unable to detect it. 1st thought was this sdhc card is bad but i when plug it to another win 7 pc it detects
straight away, so the card is not faulty. I tried uninstalling the usb driver & HID driver still can't detect. Notice that under the disk drives it does show 'Mass Storage Device USB Device' which means it actually did detect but won't show up
in 'My Computer' ..... Why? Hope someone can help to resolve this issue. Thanks

Here is the answer from Scandisk
STEP 1 - Backup the registry
1. Unplug the device from the USB port.
2. Run regedit.
Windows XP: Go to Start > Run, type in regedit and then click OK.
Windows 7, 8 and Vista: Click the Start button, type regedit in the search box, and then press Enter.
3. From the registry menu, choose File > Export.
4. Name the file SNDK.reg and save it to your desktop.
STEP 2 - Remove SanDisk info from the registry
WARNING: DO NOT delete any registry key other than keys that include VID_0781. Deleting registry keys other than keys that include VID_0781 MAY cause your computer to not boot properly.
1. From the registry menu, click Edit and choose Find.
2. Type in VID_0781 and click Find Next.
3. Once the search finishes, right-click the highlighted registry key and select delete.
4. Press the F3 key to find the next registry key that includes VID_0781.
5. Right-click the highlighted registry key and select delete.
6. Repeat this process until the search returns with No results Found.
NOTE: Under Windows 7, 8 and Vista, some registry keys may be protected and cannot be deleted. Simply skip over these keys if you receive a message that the key cannot be deleted.
7. Once all registry keys containing VID_0781 have been deleted, reboot your computer.
8. Plug the device into the computer after it's finished rebooting.

HT204384 why does my 16gb SDHC card reads as full, but I can't see the files

I have a SanDisk 30mb/s 16GB SDHC card used with a GoPro HD Hero. When I plug it into my card reader, it DOES show up on my desktop. When I double-click on it, I see the folders, but no files. I know the card is full, and it shows up as full when I press "command i".
How can I get these files?!?

I just wasn't sure I should put down the actual IP address.
You made the right choice, and is what I guessed was the case. But I've learned to confirm my assumptions; I've been surprised before.
Anyway, hope you get somewhere with your IT folks. If you approach them from the standpoint that you can't ping the server and avoid, at least initially, the "can't mount the server volume" issue, you may have better luck with them. If you can get them to help you to the point where you get a ping through successfully, you may find the other problems go away.
One note: it is possible that they've blocked the ability to ping their network devices, so the failure of the ping isn't completely diagnostic. But it's certainly a symptom to bring up with them; if they are blocking ping, they should tell you that.
Good luck.

My macbook pro does not read my camera's sdhc card all of a sudden, why?

my macbook pro does not read my camera's sdhc card all of a sudden, why?

Hi mukilb,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
About the SD and SDXC card slot
http://support.apple.com/kb/HT3553
Cheers,
- Judy

Lenovo G480 unable to read SDHC card

Hi
I having an issue with my G480 unable to detect my SDHC card. I have install both drivers for my card reader from Support site but still unable to read my SDHC card even my camera can use the same SDHC.
Any one have similar issue?
Solved!
Go to Solution.

hi mynorkin,
If you have the Lenovo G480 (type 2184 or 2688) as listed in this pdf data sheet, this doesn't support SDHC (Secure Digital High Capacity) as the card reader installed on these system is only a 2-in-1 reader which only supports MMC and Secure Digital Card,
As an alternative, you can get a USB Card Reader.
Edit: Added sample usb card reader.
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Expresscard reader for CF & SDHC cards

I'm looking for a card reader for my Macbook Pro that can read compact flash cards (from my DSLR) as well as the SDHC (from my Blackberry 8330 curve) and hopefully some of the other common photo cards. But from my cursory searches, I'm seeing only one type of reader or the other. Are CF and SDHC card formats incompatible in a single card reader? Or am I just not looking hard enough? Much appreciated!

I have never seen a single reader for the Expresscard slot that does both CF and SD. I think the issue is that the CF card won't fit in the 34mm size. So that would make for a much bulkier and less visually attractive reader The CF readers already stick out quite a bit. Now it would have to be even bigger to get the SD connector. You could get a CF reader, then get a SD-CF adapter. But that's still technically two adapters.
Me personally, I just gave up and got a $20 USB reader that does CF, SD, MS and XD. Unless you're transferring a lot of data from the memory cards, this might be the most cost effective. Otherwise, for speed, you'll have to get separate Expresscard adapters. However, you'll want to check the specs carefully as some of the readers use the USB interface of the Expresscard slot instead of the PCI interface and so might not get faster transfer rates than an external USB reader.

Does anyone's iMac read the SDHC cards?

My iMac will read SD cards, but the new type SDHC card is not read. If your iMac does, what reader do you use? I have an older reader for multiple different cards.
I used to have a 4G SD card which the older reader and the iMac would input. The card broke so I bought a SDHC 4G card and the iMac does not read it.
I wonder if I buy a SDHC card reader/USB that the iMac will 'see' the SDHC card?

The older PPC-based early LCD iMac 1 GHz PowerPC G4, 1 GB ram Mac OS X (10.4.11)
of the OP is a bit different in vintage hardware and design, without a built-in reader.
{Most other references between a newer twice-removed model iMac based on Intel chips
and other improvements, is something to consider in this thread. And that makes the link
provided not applicable to the computer in question.}
The newer external card reader should be adequate to resolve this issue, since the OS X
version should be capable to handle the data once the reader is upgraded. I'd hold off on
any changes in the system software, since the reader should plug & play. The last thing I
do is add software that came with some peripheral, when my system is otherwise fine.
{If the card in question is used in relation to a camera, for awhile, one can just plug the
camera into the Mac and use that to read the card. I rarely use a card reader with mine;
since the DSLR and other digital cameras transfer fast enough & with little battery loss.}
Good luck & happy computing!

Does the Palm TX allows for a 4GB SDHC Card?

I recently purchased a Palm TX and bought a 4GB SDHC Card for it but when I insert the card, the Palm TX does not detect it. Is there a limit as to the storage size of the SD card? Or, did I purchased the wrong card?
Thanks,
JoseMaria
Post relates to: Palm TX

1. To access photos, you use the Media application on the TX. To transfer photos, use the Media option in Palm Desktop. Look for "Add Photos" on the desktop, import them into it, then sync your TX. The direct method is to use a Card Reader with your PC and drag and drop the pictures into the DCIM (Digital Camera IMages) folder on the SD card.
(This all assumes you have read the above posts, and are using the correct type and size of SD card, or have purchased the driver mentioned to use SD HC cards!)
2. There are 3 programs available to read PDF files on a TX - Adobe for Palm, Documents to Go version 10 or higher, and the freeware PalmPDF.
Adobe is an ancient program that requires you to process any raw PDF file on your PC with the desktop client of Adobe for Palm. It will not read a raw PDF on your TX.
Docs to Go will read raw PDF files, but requires purchase. PalmPDF will read raw PDF files from your SD card. These files have to be DRM-free; i.e. not an ebook that is copywritten.
To access files on a card, open the corresponding program on the TX first, then direct the program to look on the card.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

SDHC card issues

Similar Messages

Maybe you are looking for