SDHC Card not recognized in finder but shows up in disk utility.

I have an SDHC card that I can only find in the disk utility. When I try to verify it won't. It also won't let me try to restore it.
Info:
Macbook Pro
Mac OS X 10.7.4
32 GB SDHC
I have also tried this on a 24" iMac that is also 10.7.4 with the same problem.

Very bad.
If select the SDHC card in Disk Utility, what does Disk Utility have to say about it?
Allan

Similar Messages

SD card not shown in Finder, but shown in iPhoto

Hej all,
I have a problem with my SD card. It was shown by Finder on my iMac and it was shown in iPhoto too. Since a while no SD card is shown in Finder, but each SD card is still recognised in the Finder. I have a guess: I think, that I unconciously moved the SD card from the Finder to the s Desktop. Since then it's not in the Finder anymore, but also not on the Desktop.How can I get the card back also into the finder?
Hope someone can help me.
Markus

See if pressing the Eject key ejects the disk. If it works, restart your Mac then re insert the disk.

SDHC cards not recognized, xD cards read perfectly

I have a problem with the card reader in my HP x18 1080ED notebook.
When I put a 2GB xD memory card in the slot the card is recognized and shows up in My Computer and I can view the contents.
But when I put in a SDHC card, 256MB or 8GB of 16GB, the light besides the reader lights up 8 times and then nothing happens. The card is not showing up in My Computer.
I updated the driver, reinstalled it but no effect. I also check the cards in another computer also HP and the cards work on that computer. What is the problem can anyone help me!
Thanks, hope you can help.

your computer is a dv8-1080ed Correct?
If so it may not support the SDHC type card. I would got to the HP website and search Product information and Troubleshooting tab, in the Manuals section there should be a entry called External Media where it will list the type of cards your system supports. For the dv8-1080ed It doesn't appear that the SDHC cards are supported.

Hard Drive Not Mounting, but showing connected in Disk Utility

I accidentally locked myself out of my external hard drive. While it was connected, I went into the Info and went under "Ownership & Permissions" and unchecked the Ignore ownership on this volume and I clicked the You Can drop box and changed it to No Access. The drive doesn't mount on the desktop anymore but I see it in disk utility. What should I do?

Macintosh:~ matthewjavier$ cd /Volumes
Macintosh:Volumes matthewjavier$ ls -l
total 8
lrwxr-xr-x 1 root admin 1 Feb 11 07:56 Macintosh HD -> /
d---r-xr-x 21 matthewjavier matthewjavier 782 Feb 11 18:44 Matt's Extra Brain Storage External
drwxrwxrwx 3 matthewjavier admin 102 Feb 2 2007 Matt's iPhoto & iTunes
drwxrwxrwx 3 matthewjavier admin 102 Apr 8 2007 Matt's iPhoto & iTunes 1
drwxrwxrwx 3 matthewjavier admin 102 May 13 2007 Matt's iPhoto & iTunes 2
drwxr-xr-x 3 matthewjavier admin 102 Dec 8 2006 mattstaycalm
Macintosh:Volumes matthewjavier$

Can't see drive in finder, but see it in disk utility

Hi everyone!
I have a SeaGate drive I've use as my project folder drive. All of a sudden I cannot see it in finder under "devices". If I go to disk utility, I can see it there. I ran a "verify" and "repair" and everything comes out fine. No issues. If I right-click on the drive (in disk utility) and say "open" and I see and work on my files. I did notice that after hitting "open" the drive icon shows ghosted... see attached images. The drive in question is "MTP Server". Any idea why this is happening? Thanks in advance!

It may mean it has suddenly gained a 'hidden' flag, which would also explain why you can access it whilst being oddly absent from Finder.
One way to check is to open up Terminal and type:
cd /Volumes
ls -laO
The two l are lower case L and the O is a capital o. You should get an output like:
drwx------@ 52 owner staff hidden 1768 Jul 25 16:05 VolumeName
drwx------+ 11 owner staff - 374 Apr 13 16:41 OtherVolume
Look for the entry saying 'MTP Server' in place of 'VolumeName' and see if the word 'hidden' shows up in the same place as the first example above, or whether there is just a hyphen in place of that word like the second example.

Hard drive not visible in finder or desktop, ghosted in disk utility

I just reinstalled Snow Leopard to my MacBook Pro 13 inch from mavericks, and now when I try to access my time machine backup on my hard drive, it isn't showing up. It is ghosted in disk utility. I have tried restarting my computer, and have scoured the online forums to no avail. Please help!

I strongly doubt that SL's TM can recognize a Mavericks TM volume. Your best bet if you want to migrate your stuff from the latter is to install Mavericks, restore that TM backup, then boot into the SL volume and migrate from the restored Mavericks volume.
iMac (27-inch Mid 2011), OS X Mavericks (10.9.3), SL & ML, G4 450 MP w/Leopard, 9.2.2

HT204384 My SD card wont read in FInder but will show in disk utility, any advice?

Hi, my card reader started to become inconsistant over the last week and it has now stopped reading cards all together. It will show up in Disk utility so i can format it etc but it just wont show in the Finder section. When i remove the card without prompting, i get the 'Failed to eject properly' message. Any advice would be appreciated. I only purchased in Nov 2011 brand new so not sure what operating system it is but you may know from date of purchase.
Thanks
Rob

I had this problem too on my MBP mid-2012 running Mavericks. SD cards (in MBP slot or USB reader) would not show up in Finder. I was able to see them mounted in Disk Utility. What tipped me off that they were in fact mounting (and led me to check Disk Util) is that the OS complained of improperly ejecting the sd card when I removed it.
To clarify what BDAqua said, but I didn't understand until I saw another thread, here's what fixed my problem: Click on 'Finder' 'Preferences', select Sidebar tab and tick the box 'external disks' in the Devices section.
Now my sd cards show up. Thanks!!

External Hard-Drive not showing in Finder despite no errors in Disk Utility.

I have tried to follow certain steps as described in this community but I am at a loss on next steps here. I have a wester digital that I have used for Time MAchne which all of a sudden does not appear on Finder. I have run Disk Utility and I can see it there and run the verify and repart and it reports no problems...

Here is the results of Terminal Query:
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            120.5 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                  Apple_HFS My Passport             999.8 GB   disk1s2

WD Smartware External HD recognized in Finder but not in Disk Utility

So I'm having a bit of a strange problem that is a reversal of what I see answered in the forums. I have a 2tb Western Digital Smartware external hard drive that I used to use on my old PC. I decided that I wanted to start using it with my Macbook and since there wasn't anything important on it I just reformated the drive to work with my Mac, assuming that I'd be able to use it as a normal external at that point. It worked fine initially (the day I reformatted it) but today when I plugged it in (the first time I've connected it to the Macbook after initially setting it up) it is recognized in Finder but I can't move any files to/from it. I opened Disk Utility to see if maybe I had formatted it incorrectly or something (Mac OS Extended (Journaled)) and it isn't even recognized in Disk Utility. So now I just have this drive I can browse through and open files on but can't add new files to or move files from it. Any help would be appreciated. Thanks!

Nevermind, I seem to have resolved the problem.

Wifi card not recognized after reboot.

I've got a Lenovo X140e and an Intel wifi card. (Intel Corporation Wireless-N 7260) that I installed myself, since the support for the Broadcom card it came with was spotty.
If I reboot my laptop, the card won't show up with either iwconfig or even lspci. If I do a cold reboot (power down entirely and start back up), it will show up just fine.
What gives?
Relevant lspci output:
01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 4b)
Subsystem: Intel Corporation Wireless-N 7260
Flags: bus master, fast devsel, latency 0, IRQ 38
Memory at f1300000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi

When the card is recognized, rfkill lists it as unblocked; when it's not recognized, it doesn't show up at all.
I've got i3 installed; for connection management I've been sort of trying different things - netctl never works but wifi-menu has been pretty reliable. I haven't installed any special power management stuff at all - I'm not really sure how to find out what was auto-installed?

GeForce4 TI Video Card Not Recognized Anymore?

For about almost a year, the fan on the GeForce4 TI video card would occasionally make a grinding noise, although it has always been easily fixed by lightly sticking a finger on the fan to stop it for a second and it would go back to normal.
However, about a month ago this little fix stopped working. The grinding noise was unbearable. After searching the Internet for a few minutes, I found out that I wasn't the only one suffering from this problem, and some even offered tips on how to replace the fan.
I followed the steps very carefully and made sure the card was not harmed. After installing the new fan, which was very easy, I stuck it back into the Power Mac and boot it up. However the monitor didn't find a signal.
I was glad that I installed Remote Desktop on the Power Mac so I was able to connect to it and see what's going on. I opened Apple System Profiler and noticed that the computer isn't properly recognizing the graphics card anymore! Instead of the very detailed information I'm used to seeing, this is what I saw below:
pci10de,a:
Type: VGA-Compatible Controller
Bus: AGP
Slot: SLOT-1
Vendor: nVIDIA (0x10de)
Device ID: 0x252
Revision ID: 0x00a3
I have no clue what this means as it seems like the computer still recognizes A video card. Also this also gave me the impression that the Power Mac is missing the drivers, but that's impossible as I haven't touched the software on the hard drive and nVidia drivers are part of OS X.
If the card is broken then fine, I'll take my losses and buy a new one as I would hate to just throw the computer away since it still more than fulfill my needs. But I just hope the AGP slot isn't broken.
Any ideas? Thanks in advance.

Just for clarification:
You have two systems based on the same MS-7008 mainboard, correct? Both use the same BIOS Version?
In one system, the card is functioning, running in AGP 3.0 Mode x8 and in the other, same mainboard model, what are the symptoms of "video card not recognized" besides the AGP 2.0 Mode x4 limitation?
I mean, if you can see the BIOS Setup, the card is putting something out on the screen, right?

.RAF files not recognized in bridge but PS ok. Patch 7.1 installed.

.RAF files not recognized in bridge but PS ok. Patch 7.1 installed. Anyone know the fix?

To me it seems related to your Adobe Camera Raw (ACR) converter. Clue inhere is you only miss the Raw files and have no problems in seeing other formats like jpeg and tiff.
The screenshot you delivered is from the wrong library, however, this same library (the one on system level) also is the location where you should be able to view the correct version of your ACR plugin. The path: library (same as per your screenshot)/Application support/ Adobe/ Plug ins/ CS6/ File Formats. inhere should be only one version of Camera Raw (called: "Camera Raw.plugin") and this should show version 8.3 (141).
I'm not sure about your bridge version number, Bridge 5 comes with PSCS6 but my most recent version of Bridge is 5.0.2.4.
Anyway, if you have only one ACR (8.3) installed in the above mentioned path then you might want to try to delete the Bridge plist file and Bridge cache file manually.
For this you have to Quit Bridge and find the user library (by default hidden, use menu Go in Finder and press option key to reveal).
Inhere find the plist file (user(your user name) / library / Preferences and inhere find and manually delete the file called: "com.adobe.bridge5.plist"
The in same user library find Bridge Cache. User/Library/Caches/Adobe/Bridge CS6. Inhere are 2 files, the adobe Bridge plug in cache and the folder called Cache. delete (or move outside libray) both items.
The restart Bridge (If needed also again hold option key to reset preferences) and this will create fresh files for the previous deleted items, leaving you with an almost out of the box factory set version of Bridge.

HT4623 How do I sync iPad 2 to my computer..devise is not recognized in iTunes but it does charge when I connect it?

How do I sync iPad 2 to my computer..devise is not recognized in iTunes but it does charge when I connect it?

Mac or PC - each has its own details. Also, follow the links in the right panel under More Like This. You'll find other threads that discuss this problem.

IPod shuffle 2nd Gen is not recognized on PC, but other shuffles are. Software is updated. Is this the end of the road for this particular shuffle?

iPod shuffle 2nd Gen is not recognized on PC, but other shuffles are. Software is updated. Is this the end of the road for this particular shuffle?

Hi envisionquest,
I'm sorry to hear you are having issues with your iPod. If your 2nd Gen iPod shuffle isn't being recognized by iTunes (but other are), you may find the troubleshooting steps outlined in the following Troubleshooting Assistant helpful:
Apple - Support - iPod - iPod shuffle (2nd generation) Troubleshooting
Regards,
- Brenden

HT201210 My iPad is not recognized by Finder or iTunes when it is plugged into the computer. i ran the Restore sequence and got an error message stating "The iPad could not be restored. An unknown error occurred (1611). Can this be fixed?

My iPad is not recognized by Finder or iTunes when it is plugged into the computer. i ran the Restore sequence and got an error message stating "The iPad could not be restored. An unknown error occurred (1611). Can this be fixed?

iTunes: Specific update-and-restore error messages and advanced troubleshooting - http://support.apple.com/kb/TS3694 - relating to iPad, iPhone, iPod touch, iTunes
Security software issues covered in: iTunes: Troubleshooting security software issues - http://support.apple.com/kb/TS3125

SDHC Card not recognized in finder but shows up in disk utility.

Similar Messages

Maybe you are looking for