SDK 1.3.1.03 SETUP /SMS error on W2k

On W2K, after clicking on the SDK file, the files are extracted to the TEMP directory but then I get the following errors.
Unable to Execute!
"C:\TEMP\pft81~tmp\disk1\SETUP.EXE" /SMS
PackageForTheWeb Error
Unable to execute the specified command line!
I have tried version 1.3.1.02 and have the same problem.
I need verision 1.3.1 due to requirements of other software that I need to install.
I have check the forum for suggestions... Such as checking the Dr watson log file... (no entries) and shutting down all applicationss and stopping non-essential services...(still fails with same messages) Attempting to run the SETUP.EXE command from the command line does not work either.
Can anyone provide a solution?
Thanks

I have had the same problem with installing j2sdkee-1_3_1-win.exe on windows 2000. http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=forte/ee6c735 indicated that this is either a corrupted download, out of disk space, or temp file conflict. However, I haven't had any luck trying those solutions.
Other things I have tried are unpacking the installer in winzip to a disk1 directory and runing setup.exe from there. I get "The parameter is incorrect" when I double-click the installer, and "The parameter is incorrect" when I run setup.exe from the command line.
I even moved disk1 up to the root of C: to avoid long directory name problems.
I'm pretty low on extra ideas on this one.

Similar Messages

  • Error during Portal Setup: An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount

    Error:
    Configure Portal Setup
    An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
    This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
    Errors in the Log:
    MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
    CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
    MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
    CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
    I cannot get past this error. I am running Sharepoint Foundation 2010 with Sp1. This is on a Windows Server 2008 R2 Server +Sp1.
    Any ideas?
    David Baur

    I finally figured this out, The issue was that I had put in the Self Service Portal Computer Name and Service account into the Service Manager SQL as SysAdmin, once I removed it flew through just fine.
    David Baur

  • Setup Initialization Error

    Mar 14, 2010 Setup Initialization Error My computer recently crashed. I got it repaired but in the process, most of my programs were lost including Adobe PhotoShop 7.0. I tried re-installing from the CD but got an error message which read: Setup Initialization Error. Setup is unable to find a hard disk location to store temporary files. Make at least 3089KB free space available and then running setup again. Error 101. Then I received another message: "Could not complete your request because of missing or invalid personalization information." Can anyone help fix this situation? Thank you. Kind personal regards,

    And? What operating system? What language? What computer? User account? Sorry, such vague statemts will never get you the help you may need. This is mostly a system problem...
    Mylenium

  • I updated my iPhone 3GS on iOS 5.1 everything is ok but when I tap a message in notification area a SMS error comes "This URL wasn't loaded: sms:/open?groupid=1." and when i tap on messages app open and then close certainly... Please anyone helpe me......

    I updated my iPhone 3GS on iOS 5.1 everything is ok but when I tap a message in notification area a SMS error comes "This URL wasn't loaded: sms:/open?groupid=1." and when i tap on messages app open and then close certainly... Please anyone helpe me......

    Forgot to mention I live in Peru Southamerica, the cell provider is Claro (America Moviles).

  • SMS error 3 on nearly every text. Possibly due to other company towers?

    Carrier: South Central Communications
    Blackberry 8530
    v5.0.0.395 (platform 4.2.0.167)  <<< I think that's what I'm supposed to be posting. I've never done this before
    How do I find free space? The only apps I've installed are MSN messenger & Facebook, and neither one has ever worked for me.
    I've removed the battery & done other resets, internet cache clean etc.
    I would like to start by saying I know this question has been asked, however, none of the threads I've found by searching have any information that I found at all useful. If I missed one, please, point it out.
    Wednesday, January 5, when I got home from work (around 6:30pm local time), my texts stopped sending reliably. I get the SMS error 3 on nearly every one, and I stopped receiving texts as well. I can make calls, but they tend to drop.
    When I went upstairs (lower level of my home is half underground, windows @ ground level), my texts started sending more reliably. I assumed the usually poor signal in the lower level was just worse than usual. I have gotten the error message sporadically in the past. I was not able to send or receive any texts until the next morning, when they started working again almost as usual. I had my usual 0-2 bars displaying throughout this, did not think to check signal strength in dbm.
    Thursday evening (last night) as the evening went on, my texts started going through less and less frequently. Around 11pm local time, they just stopped altogether again. Going upstairs did NOT help at this point. This morning, I am able to send and receive occasional texts, though the majority of the time I still get the error.
    My signal strength was -106dbm when I first started looking for answers (about an hour ago) and is -91 now, all texts still failing. I'm @ work today and my signal is usually crappy here, except when I'm roaming, but I'm usually able to text just fine.
    I also occasionally notice I'm roaming when I'm home in the lower level.
    I know that at the first of this year, AT&T was taking over the local towers that once belonged  to AllTel. Could this switchover be the cause of my diminished capability? I really hope not, I hope it's something I can fix myself. On the other hand, if it's just because they're working on the towers and I have such poor signal that I fail to get any signal at all when they're working on it, it will likely resolve when they're done, correct?
    Please offer any information that might be relevant.
    I'll gladly read any article or forum I'm directed to, there's just such an abundance of information available I do not know where to begin. I am a very beginning user. I was supposed to have my data plan hooked up almost a month ago but I keep forgetting to go back in. They had to get some data key to install on my phone so that it would work.
    I've only had this phone a couple months and this is the first time I've ever really had an issue with it, besides my calls not going through because it was set to the wrong country code initially.
    Thank you for your time.
    EDIT: Just set my phone to "home only" We'll see if that nixes the problem If it does, I can just blame AT&T

    tonimarieeubank wrote:
    My country code for SMS and Facebook is set on
    Canada and should be USA. When I try to save as USA it automatically changes back to Canada. This has become a problem using YouTube. How can Country Code be reset.
    Please refrain from hi-jacking another individuals thread for issues totally irrelevant to the OP's issue. This is considered rude and unacceptable.
    Please create a new thread, in the forum appropriate to your model telephone, for the issue you're experiencing. You'll stand a much better chance of getting an answer that will resolve your issue.
    "Cats may taste like chicken, but they have more bones than rabbits."
    Blackberry 101
    Tips & Tricks
    Videos to learn from on youtube

  • How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?

    Dear all
    How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?
    Thanks
    Regards
    karan

    Hello
    These are the following errors
    1. Trace level="1" type="T">no interface action for sender or receiver found</Trace>
    2. <Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!
    3.
    <Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>  
    <Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>  
    <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />  
    <Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</
    Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>Trace level="3" type="T">Error of the prevous version:</TraceTrace level="3" type="T">Error ID APPLICATION_ERROR</Trace>
    tThere are repeating errors also.
    TThanks
    Regards
    kkaran

  • "Setup initialization error" cant extract jmf !!!

    Hi !!!!!!
    i am a newbie here, and after searching the internet and these forums for hours, i couldn't find a solution...So please HELP ME !!!!
    i had successfully installed JMF 2.1.1e earlier and it was running fine, but when i uninstall it , and again tried to re-install it, it is not even extracting !!!
    the error box is:-
    Setup Initialization error
    "Setup is unable to run a program needed to proceed with the installation. Restart your system and try again.
    Error - 105. "
    please advice me what to do, its an emergency !!!!

    So nobody can help me...
    If there's no solution for my problem, I want to try to install an old version of JMF. Where I can findit?

  • Microsoft Report Viewer Redistributable 2008 setup encountered Error on Server 2008 R2 Enterprise

    Hi,               
    I need help Microsoft Report Viewer Redistributable 2008 setup encountered Error on Server 2008 R2 Enterprise.  I tried to install many time failed every
    time. Please advise how I fix this issue
    After click OK
    Here is the next error message

    This one might sort it.
    http://support.microsoft.com/kb/970652
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Setup cartridge error

    I bought a new officejet pro 8600 plus and it was damaged when i mopened the box and started setting it up.
    I promptly took the printer back to place of purchase but forgot to give them the setup cartridges for theat printer so they removed the cartridges from the 2nd printer.
    I came back home and started again the setup process and used the cartridges from the damaged printer and now the printer will not setup, it has the 'use original setup cartridges' error
    The place of purchase is now closed and i need my printer onl;ine ASAP
    How do i override this error
    Thanks
    This question was solved.
    View Solution.

    This is UNACCEPTABLE!  I support a user base with over 100 HP Officejet 4620 printers.  I sent one user a ink cartridge pack from a dmaged printer and the printer REFUSES to use the valid cartridges?!?!  This is CRIMINAL.  It's a simple tank of ink and locks to a SPECIFIC printer's hardware?!?!?  This is going to the BBB tonight.
    And this thread as absolutely NOT solved.  The orignal question from the OP has not been addressed.

  • Digital Fax to Folder Setup gives error message unable to establish 2-way communication with device

    Digital Fax to Folder Setup gives error message unable to establish 2-way communication  with device. I can s end a Fax and I can print documents. I can also, now, scan to computer. I have changed the phone line twice, restarted the router, restarted the computer, and made sure the front panel was lit when setting up the Digital Fax folder. I am on a Homegroup network, with both wireles and ethernet computers.  When I view the network, it sees both computers (wireless laptop and enthernet desktop), the printer, scanner, and router (VerizonDrive). I recently had to reinstall Windows 7, where Digital Fax to Folder Setup previously worked, and now it doesn't.  The network shows up as Network 3. When I try to view the network map, I get the error message that Windows cannot create the network map. Responses from other devices on the network are delayed or there is an  incompatible router on the network.  What am I doing wrong?

    Hello @JiffyFingers and Good Afternoon
    From what you have described, and from the work you did on another thread, I believe you'd get better assistance talking to either Microsoft or your router manufacturer. With not being able to create the network map, that's something a bit more intricate than digital fax setup
    You can have a look at this Windows cannot create the network map. Responses from other devices on the network are delayed or th... Microsoft thread as well, and you may be able to figure it out from there.
    Hope that helps, have a great day!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Porting an InDesign Plugin from InDesign CC to InDesign CC 2014 the plugin complies successfully with the InDesign CC 2014 SDK but at run time presents this error and is disabled. Does anyone know what might be the issue?

    Porting an InDesign Plugin from InDesign CC to InDesign CC 2014 the plugin complies successfully with the InDesign CC 2014 SDK but at run time presents this error and is disabled. Does anyone know what might be the issue?
    Run TimeError Message Presented when InDesign CC 2014 runs:
    Adobe InDesign cannot load the FastFractions.InDesignPlugin plug-in. The FastFractions.InDesignPlugin plug-in requires the 9.0 version of InDesign. Please contact the vendor to get a compatible version of FastFractions.InDesignPlugin.
    Show this alert again?

    As already told this means that the plugin has not been ported correctly. Some part of it for ex InDesign libraries or frameworks are being referenced from the CC sdk instead of the CC2014 sdk. To troubleshoot it i would advise you to rename the folder containing the CC sdk on your machine and then compile the project, it will fail to compile and you will get to know straightaway what aspects of the ported project are still accessing the old sdk. Fix the errors and your plugin will load fine.
    Thanks,
    Manan

  • SMS Error 3

    Hi! Lately, 70% of my text messages show a red X beside them - normally meaning it did not send. More often than not, I'm finding the recipient DID recieve them, but I still show a red x.
    When I open the "failed" message, it shows "SMS Error 3, Message ID XX"
    Any thoughts? I always have a good signal, have never had this problem before - it only started happening in the last couple of weeks.

    Some more parameters are missing like, Delivery Report, Validity Period, Sent As, Data Coding, Service Center, Leave Messages on SIM Card, Network to Send Over, Retries. I think you need to reinstall the device OS again.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Droid DNA SMS error

    I got my new Droid DNA yesterday (bought it online through amazon.com). The activation and set up went fine but I can't send/receive any SMS. It gives me an SMS error: service not available, cause code: 97, error class: 2
    Anybody know how to fix this?

    I got it fixed! I called customer service and somehow there was a "message block" added to my account. The verizon rep I spoke to was able to remove that and it fixed the issue!

  • SMS Error message.

    Every time I send a message for the last two days an error message window comes up saying:
    Unexpected end tag: expected “b”, actual “font”
    Please advise how I could have the necessary support on this issue.

    It actually isn't an SMS error message, what it is has to do with the ability to undo typing within the SMS message. If you have shaken the phone, or moved it some between two different axis, since I believe it uses the accelerometer to activate, it will prompt you to undo typing. If you haven't typed anything, then you will see the message you describe. However, if you are getting this message popup without moving your phone, there is something else going on. Have you tried to reset your phone, hold the sleep/wake button and the home button together until you see the Apple logo and then release. Ignore the slide to power off screen. That will reset the phone, but will not affect any data.
    Apple will not respond to messages here, and since that action is something designed in the OS, there wouldn't be a reason to fix it.

  • SQL Server Setup failure (Error code 0x858C001B)

    Hola..
    Vengo con un problema que me esta causando desesperacion, ya he buscado en los hilos y no puedo solucionar este problema.
    Resulta que descargue la version de SQL Server Express 2012 64 bits y al quere instalarlo me muestra el error:
    SQL Server Setup has encountered the following error:
    The SQL Server license agreement cannot be located for the selected edition, EXPRESS. This could be a result of corrupted media or the edition being unsupported by the media.
    Error code 0x858C001B
    Ya he buscado y no encuentro respuesta. 
    SQL Server Setup failure (Error code 0x858C001B)

    Hi,
    Can u have look at this Discussion
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Maybe you are looking for