SDK extensions not available anymore after Design Studio re-installation

Hi all
I've faced some issues with my local installation and was wondering if it was due to the fact that my local installation was 1.2.1 while the platform was 1.2. So I've decided to uninstall 1.2.1 and install 1.2 again locally.
Once done, I don't see extensions anymore in the designer (Design Studio Utility Pack for instance) and if I try to install it again it says it's already installed...
Where can I go to delete these extensions completely and re-install them properly?
Thanks in advance
Best Regards

If all else fails, delete your 'Analysis Config' folder is the short answer.
You can also clean up old/invalid repo archives in debug mode but that's a longer answer.

Similar Messages

  • File Class not available anymore after HD clone

    Hi and tnxs for reading.
    I installed on my MacBook Pro running Mavericks a SSD and cloned my original HDD by using Apple Disk Utility; everything is fine, however I noticed the following issue:
    by going to the Apple top left and Info My Mac and selecting the HD memory, I do not any file classification anymore, as per the following screenshot.
    Disk1: original HDD
    Disk2: cloned SSD.
    Is this a matter of time that has to be given to Mavericks to reclassify files or is this an issue? Is there a way to force Maverick to reclassify files?
    Many tnxs

    I did already actually... that screenshot was done as you say, and checked again after SSD installation on my mac, but just a few minutes after... now checked again and it is almost fine, just a few GB difference WRT the original on the OTHER and APP items... all the other are exactly the same
    Maybe SpotLight was doing its job, sorry but I was not aware of this... Now I am checking the Activity Monitor and will post on the other post, tnxs ciao!

  • Airport Express not available anymore after upgrade to iTunes 12.1

    I have Windows 7 Home Premium Service Pack 1 installed and did an iTunes upgrade from previous version to 12.1 . After the installation and restart I got the info that the 'Bonjour' service was stopped and I have to reactivate it again in the system settings. Having that done I still can't address the Airport Express speakers out of iTunes.
    Any idea what I can do?

    Hi Ranx64,
    The article linked below details a number of troubleshooting steps that can help get AirPlay to work in iTunes on your computer.
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/en-us/HT203822
    Cheers,
    Allen 

  • Yesterday after upgrading the Cisco AnyConnect app, it stopped working; Today, the app is not available anymore from the apple store, what happened?

    Yesterday after upgrading the Cisco AnyConnect app, it stopped working; Today, the app is not available anymore from the apple store, what happened?

    There is an explanation in the following link in the section "What's new in version 3.0.09440" that there was a problem with the update. It's available again now. https://itunes.apple.com/us/app/cisco-anyconnect/id392790924?mt=8

  • In the previous version of FF I could type a term in the address bar and it would auto open that website, now it just performs a google search. Is that a setting I can adjust or is it not available anymore?

    In the previous version of FF I could type a term in the address bar and it would auto open that website, now it just performs a google search. Is that a setting I can adjust or is it not available anymore?

    The change between Firefox 3.6.* and Firefox 4 is how location bar search works. In Firefox 3.6 it uses Google "Browse by name" search. With the browse by name search, it performs a Google search and if there is a clear match it will take you to the site, otherwise it shows the Google search result. With Firefox 4 it just performs a Google search if you type something which is not recognised as a URL.
    To get the Firefox 3.6 behaviour on Firefox 4 you need to change a hidden preference.
    # Type '''about:config''' into the location bar and press enter
    # Accept the warning message that appears, you will be taken to a list of preferences
    # Locate the preference '''keyword.URL''', double-click on it and change its value to the link shown below
    [http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q= http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=]
    If you prefer, you can also do this by installing the Browse by Name extension - https://addons.mozilla.org/firefox/addon/browse-by-name

  • Cannot access my email folders on iPad mini - the arrow in top left hand corner is not available anymore

    arrow in top left hand corner is not available anymore. Can anyone help?

    You should be able to contact Verizon with the account login information, unless you can get the SIM Card back from whoever you gave it to.  The SIM Card tray is on the top left edge of the device.  There is a SIM Card Tray pin that is advisable to use to get the tray to release.  Once it is out, you can swap it.  If you don't have access to your previous iPad, then you should contact Verizon as the data plan may still be active on the previous device.  This is the first iPad I have had with cellular data option included, but that is the way I understand the situation based on having to exchange my new ipad at the Apple Store.  The Genuis swapped the SIM Cards and my data plan was instantly (after a restart) active on the new one.

  • Surcode Plugin not available anymore

    After installing a fresh Windows 8.1/64 with my CS6 Production Premium, within Media Encoder, the surcode plugin is not available anymore as before.  I can only chose Dolby 2.0 but not the surcode 5.1 plugin.
    How can this be fixed?

    Did you purchase the plugin? The Surcode that was included with Encore was a TRIAL ONLY, would give 3 uses, then you had to buy it for like $300. So if you bought it, contact the vendor (Minnetonka Audio) to retrieve your serial/re-download or whatever needs to be done.
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • I am having serious issues trying to alter my old iCloud account with an old non-functioning email to my new apple id with a new email address. The message keeps coming up on all my apple products with my old email (which is not available anymore).

    I am having serious issues trying to alter my old iCloud account with an old non-functioning email to my new apple id with a new email address. The message keeps coming up on all my apple products with my old email (which is not available anymore).

    I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
    The old email address no longer exists - I haven't used it in a year probably and I no longer have the account.  I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there.  On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back.  Every 2 seconds I am asked to log in using the old non-existent email.  The device is currently useless.
    The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
    Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

  • Need help!!!!!! I've forgotten my security questions. My rescue address is not available anymore. So I can't get the instructions to reset my security questions. Please send me this instructions

    Need help!!!!!! I’ve forgotten my security questions. My rescue address is not available anymore. So I can’t get the instructions to reset my security questions.
    <E-mail Edited by Host>

    Contact the Apple account security team for your country for help changing your security questions: Apple ID: Contacting Apple for help with Apple ID account security.

  • HT5622 Why is my Apple ID or password not working anymore after I reset my password?

    Why is my Apple ID or password not working anymore after I reset my password?
    It keep asking my password... I have reset it, then, when I enter the new password, it's not accepted...

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • Word will not open anymore after update

    Word will not open anymore after update

    Hold down the Shift key when launching Word.
    If that fails, try deleting this file.
    ~/Library/Saved Application State/com.microsoft.Word.savedState
    Log out under the Apple in the Menu bar.
    Log In and launch Word.
    Still failing...
    If Word failed to launch in Guest, then you need to re-install Office.
    Microsoft Office for Mac 2011 14.4.1 Update (If you have an early installer you'll first need to update to 14.1.0)
    Microsoft Office for Mac 2011 14.4.2 Update (requires 14.1.0 to be installed)
    Important to restart after each updater.

  • Hierarchy node not available in Query Designer

    Hello Gurus,
    I can find the hierarchy node variable in BW but it is not available in query designer. Does anyone know what might be the problem and a solution?
    Thanks,
    Mark

    Hi Mark,
    You said you "find the hierarchy node variable in BW but it is not available in query designer".
    How did you find the hierarchy node variable in BW? From backend SAPGUI, you will only be able to see the variable in some internal tables like RSZGLOBV. Did you mean this?
    For "it is not available in query designer", do you means that when you want to create a hierarchy node variable for this characteristic in Query Designer, you don't find this certain hierarchy node variable in the hierarchy node variable list?
    Important thing to notice is that, flat value variables and hierarchy node variables are listed separately. Did you make sure that you have chose to list hierarchy node variables in Query Designer?
    Regards,
    Patricia

  • Seller of a locked iPod is not available anymore

    Ho to unlock an iPod if the seller has it still locked in his account but is not available anymore?

    You can't, and Apple won't unlock that iPod for you; the activation lock is an anti-theft measure.
    (120934)

  • I'm trying to re-install an earlier version of a third party app I bought from App Store, version is not available anymore. The problem, 3rd party does not recognize my purchase ID, since I got it from App Store.

    I'm trying to re-install an earlier version of a third party app I bought from App Store, version is not available anymore. The problem, 3rd party does not recognize my purchase ID, since I got it from App Store. My Mac Air Book is limited to update up to OS 10.6.8, unaware of updating the new version of Mac Cleanse I bought from App Store, this new version does not support my OS 10.6. How can the App Store provide me with an earlier version of Mc Cleanse?
    Thanks,
    jerson

    It can't. That app is now lost to you.

  • Elements 11 is not running anymore after upgrading my Mac to Mountain Lion

    Elements 11 is not running anymore after upgrading my Mac to Mountain Lion

    PSE11 does work OK with Mountain Lion but you need to delete the saved prefs and application state.
    Quit Elements.
    Launch Finder and click on Go (hold down the optn key) and click on Library when it appears in the list below Home.
    Delete the following files from the Preferences folder:
    com.adobe.PhotoshopElements.plist    
    Adobe Photoshop Elements 11 Paths
    Adobe Photoshop Elements 11 Settings
    Delete this file from the Saved Application State folder:
    com.adobe.PhotoshopElements.savedState

Maybe you are looking for