SDK optimizing for low system resources

Hello,
I'm temporary working on legacy Pentium 133MHz machine with 64MB RAM Win98SE. After multiple unsuccessful probes with J2SE SDK 1.5.0.04 and previous version I stayed with JDK 1.1.8. It works without errors at least.
My question is:
does it possible to optimize recent versions of SDK for low system resources removing unnessesary features, modules, libraries etc.?
Thanks
Antanas

Video editing via USB drive does not really work... the data transfer rate is too slow... you need eSata or Firewire 800
eSata Dock http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t
My 3 hard drives are configured as... (WD = Western Digital)
1 - 320G WD Win7 64bit Pro and all program installs
2 - 320G WD Win7 swap file and video project files
3 - 1T WD all video files... read and write files
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for easy video editing
One hard drive is not as good as two which is not as good as three

Similar Messages

  • What does it mean: Error Message "Low system resources" ?

    Hi,
    we are using CR out of Visual Studio 2005 and 2008 for a PDF export.
    We are able to start a report process and can see on the load of the process that the report seems to be generated, but we didn't received a report PDF file.
    We add the following Registry key (depending on CR version) to get log files:
    For 10.5: HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Report Application SErver\Server\
    For 10.2: HKEY_LOCAL_MACHINE\SOFTWARE\Crystal Decisions\Report Application SErver\Server\
    and got the following error message:
    ErrorLog 2010  3  1 23:55:15.293 5576 7304 (..\reporthandler.cpp:11256): CReportHandler::buildReportViewerError: CSResultException thrown.   ErrorSrc:"CRPE" FileName:"..\reporthandler.cpp" LineNum:11252 ErrorCode:568 ErrorMsg:"There are not enough free System Resources to perform this operation.
    Error formatting Field Object.
    Failed to export the report.
    Error in File e:\ReportTemp\serviceusage {8F9A2AEB-96BB-400F-AB88-47E09C916B67}.rpt:
    Low system resources.."
    ErrorLog 2010  3  1 23:55:15.293 5576 7304 (..\reporthandler.cpp:11256): CReportHandler::buildReportViewerError: CSResultException thrown.   ErrorSrc:"CRPE" FileName:"..\reporthandler.cpp" LineNum:11252 ErrorCode:568 ErrorMsg:"There are not enough free System Resources to perform this operation.
    Error formatting Field Object.
    Failed to export the report.
    Error in File e:\ReportTemp\serviceusage {8F9A2AEB-96BB-400F-AB88-47E09C916B67}.rpt:
    Low system resources.."
    Maybe do you have any suggestions what the problem could be? What does it mean with "Low system ressources"? There should be enough memory, hard disc size and cpu power on the machine.
    Please let me know if you need any further information.
    Thank you very much for your help in advance!!
    Best regards,
    Matthias

    Re logging. What I was referring was the following in  your post:
    We add the following Registry key (depending on CR version) to get log files:
    ErrorLog 2010 3 1 23:55:15.293 5576 7304 (..\reporthandler.cpp:11256): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"..\reporthandler.cpp"; LineNum:11252 ErrorCode:568 ErrorMsg:"There are not enough free System Resources to perform this operation.
    Error formatting Field Object.
    Failed to export the report.
    Error in File e:\ReportTemp\serviceusage {8F9A2AEB-96BB-400F-AB88-47E09C916B67}.rpt:
    Low system resources.."
    ErrorLog 2010 3 1 23:55:15.293 5576 7304 (..\reporthandler.cpp:11256): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"..\reporthandler.cpp"; LineNum:11252 ErrorCode:568 ErrorMsg:"There are not enough free System Resources to perform this operation.
    Error formatting Field Object.
    Failed to export the report
    Error in File e:\ReportTemp\serviceusage {8F9A2AEB-96BB-400F-AB88-47E09C916B67}.rpt:
    Low system resources..".
    I think we want to back up a bit here. I am not sure what  "Low System Resources" means or what it's about. So, let's try the following:
    1) Are you able to export to any other format?
    2) Are you able to print to printer?
    3) Try a new simple app and add a viewer to the form. See if export from the viewer export button works.
    4) In the above new app, export to CR report format from the export button on the viewer toolbar.
    5) If you are able to get an exported rpt file, it will have saved data with it. Run that report in your original app (comment out any db logon code). Can you export a saved data report?
    6) Make sure you have read / write permissions on the win\temp directory
    7) What database are you connecting to and what is the database connection method (OLE DB, ODBC, etc.)
    Ludek

  • Your request cannot be processed due to low system resources.

    When we try to open some of the reports we get following messages all the time. Can some one know why these errors comes? Its crystal reports...
    All other reports works just fine.  Environment: BO XIR2,SP4 , Linux , web logic 9.2
    Apr 28 12:09:52 Servername boe_pagesd[4769]: A failure occurred while the Page Server was processing report 'rptReportname' (id=1596058) for user xxxx
    Apr 28 12:09:52 Servername boe_cachesd[4500]: Your request cannot be processed due to low system resources.  Please contact your system administrator.
    Apr 28 12:10:02 Servername boe_pagesd[4769]: A failure occurred while the Page Server was processing report 'rptReportname' (id=1596058) for user xxxx
    Apr 28 12:10:02 Servername boe_pagesd[4769]: A failure occurred while the Page Server was processing report 'rptReportname' (id=1596058) for user xxxx
    Thanks,
    Anil

    Use "top" or "ps" on linux to look at the memory and file handle consumption for the crystal processes.  You should also double-check ulimit.
    It could also be that other non-boe processes are running on your machine and competing for resources.  Also, check if there are any clues in the system logs and look for any core files that could be in your bin directories.

  • Your request cannot be processed due to low system resources. Event ID 42443

    Post Author: mcsewnab
    CA Forum: General
    Hi all,
    We have a server that has hung up a few times in the past weeks. Before the server becomes unresponsive the event log show several of the errors below. The server still pings and attempts to authenticate an RDP session but all remote command time out. The server eventually needs to be hard booted. Utilization reports do not show a lack of available resources.
    I can't seem to find much on this error.
    Specifics are below. Thanks for any help.
    Event Type: WarningEvent Source: Crystal_cacheserverEvent Category: PageServer Event ID: 42443Date:  9/11/2007Time:  11:04:54 PMUser:  N/AComputer: Description:Your request cannot be processed due to low system resources.  Please contact your system administrator.
    Server specs:
    Quad XEON 3.33GHZ
    8 Gigs of RAM
    Plenty of free space.

    Hi,
    Is there a resolution to this, as I am having the same problem and I do not know where to start troubleshooting as the error is a litte vague.
    Greg

  • Low system resources duirng rendering

    I cant complet rendering my timeline- I getr a msage that the wyemnte in very low on resouencew.  Save your projecyt and proced with caution.  But it never complete the render.
    Can I shut down the adobe auto alayzer in window task manager before rendering?  that seems to be ueing a lot of resources.

    Jeep Dude
    Important information. What version of Premiere Elements are you using and on what computer operating system is it running?
    That information is going to be especially important if you are working with a version such as 8.0/8.0.1.
    If you are working with Premiere Elements 12 Windows (current version), then you go into the Elements Organizer/Preferences/MediaAnalysis and try to shut off the AutoAnalyzer options there. If you are in 8.0/8.0.1, you go into the Elements Organizer/Preferences/AutoAnalzyer options. And, with 8.0/8.0.1 make sure that the automatic Background Rendering feature is turned off in preferences and that you are running the program as the 8.0.1 Update.
    Another component of the equation is just what is on that Timeline that you are rendering, in the way of formats and effects applied to the content...especially Video Stabilizer?
    And, not to be overlooked, level of computer resources including installed and available RAM.
    The answers are in the details. So looking forward to your details to help us to help you.
    Thanks.
    ATR

  • AD security groups listed in user groups in Config Manager however not listed when selecting values for the "System Resource - System Group Name" query

    Morning All,
    We are in the process of setting up our SCCM 2012 infrastructure and are experiencing issues with our device collection querys based on AD security groups.
    I can see the security groups are being updated per adsgdis.log - i can see the computers that are members of the groups in AD are being recorded in the same log. Issue is when we build the device collection query - click the value button for the string,
    only 2 of the 18 AD security groups are displayed.  These are 2 AD groups we setup initially to test.
    We have since added several additional yet they only appear to populate as user groups in config manager.
    The same goes for additional OUs that we have created with AD.
    When i click the value button only the initial 10 OUs that were created are populating in the list of applicable OUs.
    We have the discovery methods Group Discovery & System Discovery enabled and set to search the parent OU recursively
    I'm wondering if there might be an SQL issue with this as it initially worked but stopped...
    Additionally we added an OU recently that now appears in in the Values options in the query but the ones added previously and additionally after are not showing up....
    Any help is appreciated.
    Thanks,
    Jeff

    Given the adsgdis.log lists the new pc and the group it's assigned to it appears the AD group discovery is working.
    Have the following excert from the adsgdis.log
    INFO: Processing discovered group object with ADsPath = 'LDAP://************.****.COM/CN=Software - Microsoft Project Professional 2010 x64,OU=Software,OU=US-West,DC=*****,DC=com' SMS_AD_SECURITY_GROUP_DISCOVERY_AGENT 10/4/2012 7:08:13 AM 8180
    (0x1FF4)
    INFO: DDR was written for group '*****\Software - Microsoft Project Professional 2010 x64' - E:\Program Files\Microsoft Configuration Manager\inboxes\auth\ddm.box\userddrsonly\asg8ud94.DDR at 10/4/2012 7:8:12. SMS_AD_SECURITY_GROUP_DISCOVERY_AGENT 10/4/2012
    7:08:13 AM 8180 (0x1FF4)
    INFO: DDR was written for system 'THURMANWIN7VM' - E:\Program Files\Microsoft Configuration Manager\inboxes\auth\ddm.box\adhh8419.DDR at 10/4/2012 7:8:12. SMS_AD_SECURITY_GROUP_DISCOVERY_AGENT 10/4/2012 7:08:13 AM 8180 (0x1FF4)
    Here you can see it processes the new members in the Software - Microsoft Project Professional 2010 x64 group and captures Thurmanwin7vm as a member.
    I did find some log entries that reference permission issues with objects in the SQL database and have opened a case with MS to get that looked into.  Hopefully that will be where the issue lies.

  • Best Practice Advice - Using ARD for Inventorying System Resources Info

    Hello All,
    I hope this is the place I can post a question like this. If not please direct me if there is another location for a topic of this nature.
    We are in the process of utilizing ARD reporting for all the Macs in our district (3500 +/- a few here and there). I am looking for advice and would like some best practices ideas for a project like this. ANY and ALL advice is welcome. Scheduling reports, utilizing a task server as opposed to the Admin workstation, etc. I figured I could always learn from those with experience rather than trying to reinvent the wheel. Thanks for your time.

    hey, i am also intrested in any tips. we are gearing up to use ARD for all of our macs current and future.
    i am having a hard time with entering the user/pass for each machine, is there and eaiser way to do so? we dont have nearly as many macs running as you do but its still a pain to do each one over and over. any hints? or am i doing it wrong?
    thanks
    -wilt

  • Recording forced to stop low system resources

    Hi Everyone, I hop that you can help.
    I'm trying Captivate as a solution for ctreating online tutorials for my clients. This involves on-screen demos along with soem text slides, nothing fancy...
    Up until today I'v e been very happy with what I have been able to do. Screen recording has been great. Took a few goes to get the settings that I wanted but very happy.
    Yesterday i was able to recrord 10 minutes plus in one hit, perfect, saved it into the project and all was good. Today, having rebooted the machine and actually running fewer other apps, I can't record more than about 1.5 - 2 minutes before Captivate stops recording and creates a slide. I realise that this is likely toi relate to my PC (Windows 7, 9650 Core 2 Quad, 8GB RAM and 2TB HDD).
    Oh, and it's Captivate 5.5.
    Does anyone havew any suggestions as to where to look and what might cause this?
    Cheers
    Keith

    First of all try to clear the cache. This is possible using the Preferences, General.
    When you say 'recording' do you mean Full Motion Recording or the more natural Automatic recording, where static slides are created. Captivate is not really meant to do long FMR recordings, which changed in Captivate 6 where there is a new Video demo feature which is capable of that.
    Lilybiri

  • CS5 Bridge low on system resources

    Everytime I open CS5 bridge and work on my camera raw files I get the foloowing error message: bridge low on system resources and needs to be closed. I never had this problem in CS4. I am running Windows XP Pro with 4gb of ram. I have talked to Adobe Tech support 3 times this week and have not been able to fix the problem. Is any one else having this problem?

    I've experienced these exact same problems, and have been watching for anything useful to be added to this and one other thread.
    ( http://forums.adobe.com/message/2847218#2847218 )
    I did install the update released by Adobe today (May 27) but unfortunately nothing has changed.
    I was interested to read that you did not have these problems with CS4 (as I skipped that version and upgraded from CS3). So, it appears that this is a problem specific to CS5.
    For now, my "workaround" is to abandon CS5 and go back to using CS3. NOT a great solution...or use of my money;but I have to get some work done!

  • BEA-141230 Could Not locate descriptor file for System Resource: DS name

    Guys,
    When I start the Admin and Managed server ..I get below warning message.
    *<Warning> <Management> <BEA-141230> <Could Not locate descriptor file for System Resource : datasource1.>*
    I know that weblogic server is unable to locatie datasource1.xml file at <SOA_HOME>/user_projects/domains/base_domain/config/jdbc
    Is there any way to to get rid off from this error? I tried to delete datasource from weblogic Admin console, but get below error:
    java.lang.NullPointerException
    All changes have been activated. No restarts are necessary.
    Errors were encountered while performing this delete operation.
    Thanks,
    Ab

    Are you starting servers with the root user? make sure that using whichever user you are starting server, it has full access on MW_Home and it's sub-directories. You may consider raising a support SR.
    Regards,
    Anuj

  • "System Resource Exceeded" for simple select query in Access 2013

    Using Access 2013 32-bit on a Windows Server 2008 R2 Enterprise. This computer has
    8 GB of RAM.
    I am getting:
    "System Resource Exceeded"  errors in two different databases
    for simple queries like:
    SELECT FROM .... GROUP BY ...
    UPDATE... SET ... WHERE ...
    I compacted the databases several times, no result. One database size is approx 1 GB, the other one is approx. 600 MB.
    I didn't have any problems in Office 2010
    so I had to revert to this version.
    Please advise.
    Regards,
    M.R.

    Hi Greg. I too am running Access on an RDP server. Checking Task Manager, I can see many copies of MSACCESS running in the process list, from all users on the server. We typically have 40-60 users on that server. I am only changing the Processor Affinity
    for MY copy, and only when I run into this problem. Restarting Access daily, I always get back to multi-processor mode soon thereafter.
    As this problem only seems to happen on very large Access table updates, and as there are only three of us performing those kind of updates, we have good control on who might want to change the affinity setting to solve this problem. However, I
    understand that in other environments this might not be a good solution. In my case, we have 16 processors on the server, so I always take #1, my co-worker here in the US always takes #2, etc. This works for us, and I am only describing it here in case it
    works for someone else.
    The big question in my mind is what multi-threading methods are employed by Microsoft for Access that would cause this problem for very large datasets. Processing time for an update query on, say, 2 million records is massively improved by going down
    to 1 processor. The problem is easily reproduced, and so far I have not seen it in Excel even when working with very large worksheets. Also have not seen it in MS SQL. It is just happening in Access.

  • Introducing Lowarch - Arch for low-end systems

    Some of you might remember that I mentioned my plans of making an Arch install cd for low end systems. I've come quite far with this project now.
    First, I must say that it was a lot harder than I first expected. So I can say I have learned a lot in the process.
    Second, before I start ramblig about where I am in the process, I'll just outline what the plan is:
    The best Linux distribution is Arch Linux, because of it's speed, simplicity and elegance in design. I often get hold of some old laptops which are too old for Arch (i586 normally, but also i486). I have tried a lot of distros made for low end systems, but I always end up thinking, ah how wonderful it would have been to have Arch on this. It would have been the perfect distro for this machine.
    And the more I thought about it, I realised that even though Arch is perfect for super modern systems, it would be even more perfect for old systems, because of it's speed and simplicity, and not least the choice of packages.
    Some have started projects to port Arch to i586. I don't think that is the best solution. A lot of Arch isn't really useful on these machines. Therefore I decided to make a new distro based on Arch, where the main difference is the choice of packages. You don't want to run a video editor on a i586. For now I've called the distro Lowarch.
    Here's what I have done so far:
    1st try:
    Oh, I just change the compiler flags to i486 in /etc/makepkg.conf and start compiling all the packages. That worked great. Almost everything in base compiled fine. Until I started to notice the strange i686's coming up in all the ./configure outputs, and when I tried to install some of it on my i586, a lot of Illegal instruction messages came up.
    After doing some research, I understood that some programs make static links to libraries, all of which, of course, are i686 coded on my system. I realised I needed to do this differently. Of course I didn't want to do all the compiling on a 486 machine.
    2nd try:
    I made a Cross Linux From Scratch system, compiled for i486. Even that I had to make twice, for a lot of programs check what processor they are running on and compile for that. So the second time I used a so-called uname-hack. A small kernel module which makes the kernel report that it's running on an i486 machine.
    When I had a basic build system, I compiled pacman, and started to build packages. This time I had to take care of the order for dependencies to work out. First kernel-headers, glibc, etc. I installed one package at a time into an empty directory with the pacman -r option.
    After having the base system compiled, I booted it, and (using the uname-hack still) continued to compile the other packages in current, and the ones that I wanted from extra.
    It was really hard, since a lot of packages just don't compile with recent glibc and gcc. I have learned a lot about writing small patches just to make gcc happy or take away symbols not used anymore etc. The dependencies in the pkgbuilds are not always correct when it comes to building packages. Sometimes, and this is the most frustrating, packages seems to build correctly, but because some library wasn't installed or whatever, a few files are missing from the package, and I have no way to know, untill something goes wrong. Often this wrong is a package not compiling because include files are missing.
    Another problem was to make an installer. I decided I just wanted a simple installer, like Arch has. So I compiled busybox and made an almost exact copy of the 0.7.2 install cd, just compiled for i486, and with my package selection on it.
    What's left to do:
    1. Look more closely at the package selection. If there are people who are interested in this we can have some nice discussions about this. There are a lot of packages I just don't know what is for, and therefore I don't dare take them away.
    2. Clean up the PKGBUILDs, e.g take away references it the i686 and 64bit  arch.
    3. Compile the whole set of packages again, just in case.
    4. Releasing it.
    I've set up a wordpress page at lowarch.linuxophic.org, which is empty now, but where I'll put out a link to the iso when it's ready.

    Yes, I think it would be smart to check out the PKGBUILD once in a while and see if they are still able to build packages. It seems this is only done when new releases arrive.
    The thing about old programs not compiling with newer glibc and gcc or other libraries is unavoidable, and there's an unending stream of patches to address this issue. If a package hasn't had a release for a year, it's quite common that a change in a library it depends on will break the compilation. When or if new releases come, they should usually fix this.
    Of course, PKGBUILDs of current packages should work with a current system, not with a system from last year, if their supposed to be of any use. But it's a huge job to keep this up to date at all times, and you need some programming skills to do it, and I would rather have the devs focus on more important things, like updating packages and making everything work even better.

  • System Resources Running Low

    I have a Satellite A105-S4064 model, XP version. I keep getting the following message and I do not know what it means. If anyone can help me out I would appreciate it. I have plenty of memory left and battery checks out fine.
    Message reads:
    "System Resources are running low. Close some applications running on this computer."
    May not be these exact words, but close to it.

    Satellite A505-S6980 
    someone reopens the computer later, I get a message that says...
    You have Windows set to do what when the lid is closed? I set mine to Do Nothing.
       Control Panel > Power Options > Choose what closing the lid does
    -Jerry

  • While Browsing SSAS 2005 Cube Getting Error " The following system error occurred from a call to GetOverlappedResult for Physical file: Logical file: '' : Insufficient system resources exist to complete the requested service."

    Hi Guys,
    When I try to Brows Cube (SSAS 2005), I get below error (Sometimes):
    TITLE: Microsoft SQL Server 2005 Analysis Services
    Server: The operation has been cancelled.
    The following system error occurred from a call to GetOverlappedResult for Physical file: '\\?\F:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\XXX_2012.0.db\XXX DC.0.cub\FACT_XXX.0.det\PARTITION_2013Q31.0.prt\674.fact.data', Logical file: '' : Insufficient
    system resources exist to complete the requested service. .
    The following system error occurred from a call to GetOverlappedResult for Physical file: '\\?\F:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\XXX_2012.0.db\XXX DC.0.cub\FACT_XXX.0.det\PARTITION_2013Q23.0.prt\385.fact.data', Logical file: '' : Insufficient
    system resources exist to complete the requested service. .
    BUTTONS:
    OK
    and I think due to above Error, Index on a Particular Attribute (EMP_ID) of a DIMENSION DIM_EMP is getting dropped from FEW of the Partitions (Folders) and started getting new error:
    TITLE: Microsoft SQL Server 2005 Analysis Services
    File system error: The following error occurred while opening the file '\\?\F:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\XXX_2012.0.db\XXX DC.0.cub\FACT_XXX.0.det\PARTITION_2013Q31.0.prt\688.DIM_EMO.EMP_ID.fact.map'.
    BUTTONS:
    OK
    I followed the above path and did not find file 688.DIM_EMO.EMP_ID.fact.map in folder PARTITION_2013Q31.0.prt. Once I rebuild the Index (ProcessIndex) for this partition, I am able to See file 688.DIM_EMO.EMP_ID.fact.map.
    But again when next time I get error "Insufficient system resources exist to complete the requested service", Then 688.DIM_EMO.EMP_ID.fact.map will be dropped and will not be available in folder PARTITION_2013Q31.0.prt.
    Anyone had similar issue. Could you please share your experience and resolution if any.
    Thanks Shiven:) If Answer is Helpful, Please Vote

    Hi Shiven,
    In your scenario, the issue occur at sometimes, right? Base on my research, the issue can be caused by that calculation estimate exceeded available memory. Possibly due to possible number of dimension members and sizes of keys. And 32bit environment didn’t
    allow for any expansion to the SSAS memory space.
    To avoid this issue, please try to use userva to fine tune the 3GB setting down to 2900 since /3GB is the likely
    cause (has been for most other customers who encountered the same problem before). The KB Articles below discuss that setting in detail.
    How to use the /userva switch with the /3GB switch to tune the User-mode space to a value between 2 GB and 3 GB
    Regards,
    Charlie Liao
    TechNet Community Support

  • 5.1 Sound for Laptop without devouring system resourc

    Hello!
    I already have a set of Creative 5. surround sound speakers with the 3 surround inputs (stereo, centre/subwoofer, rear) and I have now purchased a Dell XPS M70 laptop for myself to play games. I would appreciate any advice on how to connect the two.
    As far as I can tell there are three options by Creative:Creative Sound Blaster Li've! 24-bit External Sound Card (The cheapest)Creative Decoder DDTS-00 (the most features)SoundBlaster Audigy 2 ZS Platinum Sound Card (the fastest?)
    Would I be right in thinking that the Audigy 2 ZS Platinum would be the fastest and use the least system resources as it is a PCMCIA card rather than a USB 2 connection?As I will be playing games like Doom 3, Half-Life 2 and Quake 4 it is important that the add-on hardware itself decodes 5. and EAX sound rather than the drivers, what is the best product for this?
    Thanks for any replys.

    Hello - and sorry that i did not reply earlier.
    I have a satellite l550-11j.
    To be honest, I don't really know the difference of sound between the onboard sound card and ones that support 5.1.
    As far as I know it should be able to decode the sound as well so that it works just like that, right?
    Or does it make a huge difference?
    Another problem is, that I don't use windows but ubuntu, but well, I guess I can find a way to solve that issue as well.
    Greetings,
    Jnny

Maybe you are looking for