SDK sample services work without CallManager

Hello All,
I've downloaded the Cisco IP Phone Services SDK. From looking through the documentation, it looks like, if I don't want to do anything related to telephony (for example, I just want to run the "clock.asp" sample), I should be able to purchase and configure a 7970 phone and run the clock sample service on the phone without owning a CallManager server. Is this correct?
Thanks,
-Ben

Yes. IMO, you must only create a url for a ipphonemenu that point to this sample service. In The SDK there's a CallManager Simulator, but i don't know if 7970(i tried with the 7960 model...it works fine...but some limitations...)is supported.
Hope that helps,
Vitor

Similar Messages

  • Do any of the location and two-step authentication services work without IPOD WiFi?

    IPOD Touch 4g, IOS 6.01
    I signed up for two-step authentication but I now realize that all the necessary location services only work through WiFi.
    I don't use WiFi at home and only connect my IPOD directly to the PC whenever I want to use Itunes or manage it.
    Is there any process to setup location services and two-step authenticate through a PC internet connection?
    Thanks

    I think you are going to find the WiFi saps that good life right out of it -- it will also run hotter with WiFi on.
    I did some informal testing on this myself... the best battery life I get is with WiFi turned off and only turned back on when needed to surf the net. I use EDGE for e-mail.
    Today was my first "real use" day... It charged last night and was fully charged this morning. I texted quite a bit. I sent a bunch of e-mails. I called my husband via bluetooth. My daughter called several times to check in. I called a few work contacts for brief convos. I browsed the internet for about 15 minutes. Made an appointment in the calendar. Showed google maps, weather, stocks, and safari to a friend (using EDGE). Now tonight, safely back at home, I still have about 70% battery remaining.
    Any day I had WiFi on all day I barely got through 12 hours before it needed to be charged. Last night when I was intentionally running my battery down I turned on WiFi. Starting with a battery charged about 50% I browsed with WiFi for 3-4 hours and the phone died.
    I do keep bluetooth off too unless I'm in the car, but honestly, I think it's really the WiFi that is the biggest battery draw.

  • Service works "without party", "not with party"

    I have a service that is sending in IDOCS to my R/3 system.
    I have maintained the adapter specific identifiers in the ID for the IDOC adapter LS.
    When the service is NOT tied to a party, the IDOC is created and sent correctly.
    If I move this same service under a Party like Dell, I immediately get the "Unable to convert service to logical system". Nothing has changed! The adapter specific info is the same and the receiver is the same! The only difference is that it is now under a party!
    I then tried applying the control record values from the payload. Whem I do this, the error changes to:
    "Unable to convert sender XI party http://sap.com/xi/XI/XIParty to an IDoc party"
    I have maintained the party identifier exactly as such, where DSS_ABAP_220 is the SAP system receiving:
    Agency                 Scheme               XIParty
    http://sap.com/xi      XiParty              Dell
    DSS_ABAP_220           ALE#LI#LF            2100012869
    see anything wrong?
    Chris

    I am still having this problem. Any idea as to why it is occurring?

  • AcrobatActiveXVB SDK Sample - Links in PDF Not working

    Hi,
    I am trying to create an application in VS.net (similar to AcrobatActiveXVB SDK Sample) to display PDF files in my application.  PDF file opens fine.  But external links in PDF file are not working.  I trying to display a main index pdf file, which contains external links to 10 other PDF files.  All 10 PDF files are located in my local hard drive (main index pdf file is also located in the same folder).  If I open the main index file in Acrobat Reader then it the links are working fine.  It is not working only when it is opened inside the AcrobatActiveXVB SDK Sample.  Please help.
    Please Note: Links are not grayed.  I get the hand mouse pointer, when I mouse over to the links.
    Windows OS - XP SP3
    Acrobat Reader - Tried it with 9.1.3 & 9.3.3.  Un-installed and re-installed multiple times
    Thanks in advance.
    Rajaram

    hello, the pdf viewer is still somewhat experimental and under very active development - you could try if the same error is occurring in the current development version, which you can download as an addon from http://mozilla.github.io/pdf.js/extensions/firefox/pdf.js.xpi
    in case it has the the same rendering problems, you could then file a bug report at https://github.com/mozilla/pdf.js/issues (a github account is necessary for it though) - please also provide a sample document where the error is apparent!

  • WiFi work without service?

    I was wondering, will WiFi work without the AT&T service, or would I not be able to do anything with the iPhone?

    A phone that was never activated will not work at all.
    If you activate the phone and subsequently cancel your AT&T service, you can use the phone like an iPod Touch, including WiFi, so long as you keep the SIM card that it was previously activated with.

  • HT5085 does i tunes match work without an internet connection, like if you are out of service

    does i tunes match work without internet connection, like if my phone is out of reception

    Hi stockd,
    Thanks for visiting Apple Support Communities.
    iTunes Match requires an internet connection, as mentioned in this article about how to subscribe:
    If at any time during the matching and uploading process you lose your Internet connection or experience a power outage, iTunes will automatically resume where it left off the next time you open iTunes.
    See the full article for more information about subscribing to iTunes Match:
    iTunes Store: Subscribing to iTunes Match
    http://support.apple.com/kb/ht4914
    Best,
    Jeremy

  • Toplink app works without oc4j,fails with security excp. in oc4j[SOLVED]

    OS: Windows XP
    jdk version: 1.5.0.04 (installed normally with windows installer, no tampering)
    JDeveloper version: 10.1.3.2.0 (base installation)
    I'm new to JDeveloper and I'm working on SRDemo application from online ADF tutorial under JDeveloper. After 6th chapter I tried to run the app with embedded oc4j. After a login to app i got a toplink exception caused by a security exception. I've tried toplink part of the application with a standalone client it works without this strange problem. Also other toplink tutorials that i have work without oc4j.
    The exception is this:
    Note: some messages were in Turkish, so I (partly) translated them, they may not match original english messages
    [TopLink Info]: 2007.07.06 10:52:31.312--ServerSession(29560314)--Thread(Thread[HTTPThreadGroup-4,5,HTTPThreadGroup])--TopLink, sürüm: Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)
    [TopLink Config]: 2007.07.06 10:52:31.328--ServerSession(29560314)--Connection(27524709)--Thread(Thread[HTTPThreadGroup-4,5,HTTPThreadGroup])--connected(DatabaseLogin(
         platform=>Oracle10Platform
         user name=> "SRDEMO"
         data source url=> "jdbc:oracle:thin:@localhost:1521:XE"
    [TopLink Severe]: 2007.07.06 10:52:31.343--ServerSession(29560314)--Thread(Thread[HTTPThreadGroup-4,5,HTTPThreadGroup])--Local Exception Stack:
    Exception[TOPLINK-7107] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.ValidationException
    Exception message: Error in decrypting .....
    Caused by: java.security.NoSuchAlgorithmException: Algorithm DES not available      at oracle.toplink.exceptions.ValidationException.errorDecryptingPassword(ValidationException.java:587)
         at oracle.toplink.internal.security.JCEEncryptor.decryptPassword(JCEEncryptor.java:94)
         at oracle.toplink.sessions.DatasourceLogin.prepareProperties(DatasourceLogin.java:296)
         at oracle.toplink.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:147)
         at oracle.toplink.internal.databaseaccess.DatasourceAccessor.connect(DatasourceAccessor.java:197)
    ...(the stack goes on followed by below causes)
    Caused by: java.security.NoSuchAlgorithmException: Algorithm DES not available
         at javax.crypto.SunJCE_b.a(DashoA12275)
         at javax.crypto.SecretKeyFactory.getInstance(DashoA12275)
         at oracle.toplink.internal.security.JCEEncryptor$Synergizer.getMultitasker(JCEEncryptor.java:104)
         at oracle.toplink.internal.security.JCEEncryptor.decryptPassword(JCEEncryptor.java:74)
         ... 117 more
    Caused by: java.security.NoSuchAlgorithmException: Error constructing implementation (algorithm: DES, provider: SunJCE, class: com.sun.crypto.provider.DESKeyFactory)
         at java.security.Provider$Service.newInstance(Provider.java:1155)
         at sun.security.jca.GetInstance.getInstance(GetInstance.java:220)
         ... 121 more
    Caused by: java.lang.SecurityException: class "com.sun.crypto.provider.DESKeyFactory"'s signer information does not match signer information of other classes in the same package
         at java.lang.ClassLoader.checkCerts(ClassLoader.java:775)
         at java.lang.ClassLoader.preDefineClass(ClassLoader.java:487)
         at java.lang.ClassLoader.defineClass(ClassLoader.java:614)
         at oracle.classloader.PolicyClassLoader.defineClass(PolicyClassLoader.java:2241)
         at oracle.classloader.PolicyClassLoader.findLocalClass(PolicyClassLoader.java:1462)
         at oracle.classloader.SearchPolicy$FindLocal.getClass(SearchPolicy.java:167)
         at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
         at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1674)
         at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1635)
         at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1620)
         at java.security.Provider$Service.getImplClass(Provider.java:1172)
         at java.security.Provider$Service.newInstance(Provider.java:1129)
         ... 122 more
    This happens when i run toplink project inside oc4j, with a normal java client outside oc4j it works.
    The strange thing is the root cause of the problem (the exception complaining about signer) . If the root cause of this problem was really correct system wide, neither security code samples nor the standalone client that i tried would have worked.
    Only similiar issue I've found on the net is a problem that occured under eclipse due to a bug in previous versions of jce, but it seems this is no longer an issue.
    No one other than me seems to have this problem, so this implies a problem with my system, but the root exception about signer information (which is not correct) says there is something wrong with toplink/oc4j runtime or there is some subtle bug.
    I am trying to download another jdk1.5 version to see if this is a subtle bug of java-1.5.0.04 and oc4j, but either sun servers or my isp has a problem because the download is in the order of bytes and fails all the time.
    I think there can be a problem with the java2.policy file under oc4j config dir, but i don't know if it is really used and necessary or not.
    I don't know much about oc4j config so i need some help to proceed. thanks in advance
    Message was edited by:
    identityunknown

    Sorry, I tried something that I should have tried before posting, that gives another information about my problem.
    when i use standalone oc4j using start_oc4j.bat under jdev/bin, I also get the same security exception stack (nothing deployed to server) during server initialization. the default java command in start_oc4j.bat is this:
    OC4J_OPTS=
    VM_OPTS=-XX:MaxPermSize=256m
    JAVA_COMMAND="%JAVA_HOME%\bin\java.exe" %VM_OPTS% -jar oc4j.jar %OC4J_OPTS%
    if I change the command to this:
    OC4J_OPTS=
    VM_OPTS=-XX:MaxPermSize=256m -Xbootclasspath/p:"%JAVA_HOME%\jre\lib\ext\sunjce_provider.jar"
    JAVA_COMMAND="%JAVA_HOME%\bin\java.exe" %VM_OPTS% -jar oc4j.jar %OC4J_OPTS%
    and put sunjce_provider.jar on boot classpath I don't get that exception and oc4j initializes normally. My new questions are:
    1. what is the reason for this behavior
    2. how can I specify boot classpath option for embedded oc4j and/or JDeveloper

  • SDK Samples in HIS 2013

    After installing Host Integration Server 2013, I do not see any of the SDK Sample directories on the file system.
    Did I miss something in the install or are these samples not part of the install media anymore???
    Thanks,
    Gary Clanton

    HIS 2013 is available as a supplemental license to BizTalk 2013. This means that you have to license one of the BizTalk Server 2013 Editions to get a license for HIS 2013. You don't need to install and use BizTalk Server in order to use HIS. You only need
    to install BizTalk Server if you need to use one of the BizTalk Adapters that is included with HIS.
    You didn't indicate what type of applications that you will be communicating with on the IBM mainframe. If you will be communicating with CICS or IMS transactions on the mainframe, then you'd likely want to take a look at the Transaction Integrator (TI)
    feature in HIS 2013. You can use TI with a WCF service. See
    http://msdn.microsoft.com/en-us/library/dn150066(v=bts.80).aspx#application for an overview of the Application Integration feature of HIS 2013. You might also want to look through the following topic:
    http://msdn.microsoft.com/en-us/library/dn149782(v=bts.80).aspx
    The HIS 2013 SDK does include sample applications. When the SDK is installed, it gets installed to the following folder:
    C:\Program Files\Microsoft Host Integration Server 2013 SDK v1.0
    Under this folder, you will see the following folders:
    - ApplicationIntegration
    - BizTalkAdapters
    - DataIntegration
    - MessageIntegration
    - NetworkIntegration
    - SessionIntegration
    Under each of these folders are samples specific to those features. For example, under ApplicationIntegration there are two additional folders: HostInitiated and WindowsInitiated. The WindowsInitiated folder includes samples for Transaction Integrator where
    TI initiates transactions by calling application on the IBM host system. Under WindowsInitiated, you will find a WcfService folder that has a TI WCF sample application. You'd also want to look at the ApplicationIntegrationStarterGuide sample because it describes
    many of the new TI features in HIS 2013.
    If TI doesn't fit the needs, then you need to look at the other HIS features to see what might work for the IBM integration scenario that you are working on.
    You might also want to look at
    http://msdn.microsoft.com/en-us/biztalk/hh441721 as this site has many links to HIS specific resources.
    Thanks...
    Stephen Jackson - MSFT

  • Runtime problems with sdk sample.

    Hi,
    has anyone had any problems when running the sdk sample (instantclient 10.1.0.4)
    compiled with MS Visual C++ Express version? I called make.bat and everything
    compiled and linked without any worries. When I run the program it crashed. While
    debugging I got the following info:
    First-chance exception at 0x7c81eb33 in occi.exe: Microsoft C++ exception: oracle::occi::SQLException at memory location 0x0012fb74..
    Unhandled exception at 0x7c81eb33 in occi.exe: Microsoft C++ exception: oracle::occi::SQLException at memory location 0x0012fb74..
    This error occurs when trying to call ::createEnvironment().

    I gave up with the occidml example and restarted with
    the occiobj example. And guess what happened. It
    worked. I can´t beleive it.
    So I really don´t know what the difference of these
    two example is as the only difference so far (as I
    saw in the constructor of the two classes) is an extra
    call in the occiobj-example. Well the parameters
    are also different.
    Occidml-example constructor:
    occidml (string user, string passwd, string db)
    env = Environment::createEnvironment (Environment::DEFAULT);
    conn = env->createConnection (user, passwd, db);
    Occiobj-example constructor:
    occiobj (string user, string passwd, string db)
    env = Environment::createEnvironment (Environment::OBJECT);
    occiobjm (env);
    con = env->createConnection (user, passwd, db);
    If I have time again I will give the occidml another try. By far
    I get along with the occiobj-example.
    Thanks for all the people who helped me (or intended to).
    Greetings Roman

  • HT4995 My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?

    My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?

    lbryan1987 wrote:
    I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
    You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
    there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
    Seriously? It's physically broken!

  • Help getting our infinity service working!

    We have had the utterly most frustrating/annoying experience with BT Broadband in Cornwall, the first county in the country to go to Superfast broadband.  BT Broadband is the monopoly provider, I and my husband have spent hours - literally on the phone to the call centre trying to sort out why are new Infinity connection would not work, having had a normal box previously and being told by BT that we would be better to upgrade to Infinity.  Over the past 4 weeks we have been trying to sort the issue out to no avail.  We have been passed from one person to another, they have cancelled appointments that were made without telling us, as a result we have lost numerous days of working and had to buy a seperate system from EE, which I thoroughly recommend, at considerable cost again.  There is no one you can talk to in the UK or Cornwall, there is no escalation of the complaint and apart from one person, all the people we spoke to were extremely unhelpful.  As the head of customer services, I have resorted to this open letter.  Sorry but we have tried every other route that is available to us as customers. Your ability to allow customers to escalate complaints beyond level 2 needs addressing, particularly as you have the monopoly as a provider.  Thank you

    Hi Orchard1,
    Welcome to the forum and thanks for your post.  I've moved your post to start your own thread as that's the best thing to do.  I've also changed the name of your thread to save any confusion.
    Sorry for the problems you're having getting your BT Infinity service working from when it was installed.  From reading through your post it's clear you've had a poor experience and I can appreciate how frustrating this has been for you and your husband.
    No need to worry anymore as we'll pick this up and give you a hand to get sorted from here.  Click on my username and under the "about me" section of my profile you'll see the link to send us your details.
    Cheers,
    Robbie
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Will Xserve work without a rack?

    Before I get all these rants about how stupid this question is let me preface it with a short story:
    The owner of my company wants a new server. He asked me which I thought was better: tower or rack mount. I said that the PowerMac doesn't have the service warranty we would expect from a server, and as a desktop, is not really designed to run 24/7 the same way Xserve is. So we configured a new Xserve and it is in the process of being made. He then asked me the question: "will it work without a rack?" Being honest, I said "It would power on, but it's not recommended to run that way because it can't cool properly and it's not physically secure."
    Now he tells me we aren't ordering a rack for this $6000 server. Can you please list all the reasons this is NOT going to work, so I can go back to him with a huge rebuttal? It just doesn't seem logical to me to not spend a few hundred dollars to properly secure this very expensive piece of equipment, and I don't have any fight left in me to come up with all the answers on my own.
    PowerBook G4 12" 1.5GHz   Mac OS X (10.4.7)   5th Gen iPod Video, 1st Gen iPod Nano

    He then asked me
    the question: "will it work without a rack?" Being
    honest, I said "It would power on, but it's not
    recommended to run that way because it can't cool
    properly and it's not physically secure."
    Speaking from my limited experience (18 months) with our Xserve G5: The Xserve does not need top and bottom venting; it cools front to back. A risk, though, will be that it gets shoved back against a wall and thus has poor airflow out the back, and you don't realize until you have done it what a mess of cables comes out the back and why you need the cable management arm (as aggravating as it is when you first use one) to manage the cables.
    The Xserve is heavy. It's difficult to walk away with one. The enclosure lock will still work without a rack, but it's not real security anyway, just protection against the drives being bumped out by accident. But an unracked Xserve will be prone to injury and falling off a table, etc. They are BIG and HEAVY. The Intel Xserve is even longer than the Xserve G5 (look at the dimensions).
    If the concern is the expense, well, you can build your own rack rather cheaply. I suggest Starcase (http://www.starcase.com), which lets you build a rack of any dimensions - you will probably want at least a 3U or 4U rack for your Xserve - 1U for the Xserve, 1U for a UPS (APC has a nice 1U 1000W UPS and a same-size 750W UPS), 1U for a tape drive and autoloader (you will need to back up all that data), and you might need another few rack units of height. The nice thing about the Starcase rack solution is that, as your rack height needs expand, you can simply get the four corner posts of greater height and grow your rack. Starcase also has side panels, top panels, etc. For custom-height solutions (rather than their pre-bundled standard sizes), see:
    http://www.starcase.com/customsteel_rackstore.htm
    Check the Starcase prices so you can present your boss with a true picture of the cost. They are built like a tank. I STRONGLY advise that you put your Xserve in a rack; otherwise, it will be very difficult to service when the time comes - and you WILL need service, eventually.
    However, note that the Xserve is NOISY. If the Xserve is going to be in an office environment, you will need an acoustical enclosure, such as the XRack Pro. See:
    http://www.xrackpro.com/
    Very nice, very quiet, and a bit pricy.
    Hope this helps.
    Russ
    Xserve G5 2.0 GHz 2 GB RAM   Mac OS X (10.4.8)   Apple Hardware RAID, ATTO UL4D, Exabyte VXA-2 1x10 1u

  • Scaling of SDK Speedometer not working

    Hi Expert,
    I need to build a dahsboard using some gauges. Therefor I'm trying to use the speedometer delivered with the SDK sample pack. Getting selected data from from the DS is working fine. But I'm not able to set a different scaling via ticks and min / max in the properties. It is always scaled on 100.
    first image shows the output with the defined values from the query. As you can see even if the "End Value" is set to 30 (image 2), the speedometer is still scaled from 0 - 100. If I manually set the needle value to i. e. "50" the needle is set in the middle of the gauge to "15". So obviously the change of the properties does not have any effect on the scaling. Any hints are welcome... Thank you in advance...
    code used to get data from ds

    I don't know if i get the problem, but i try to answer.
    FYI I'm the developer of this component.
    I did not think to the scaling factor of the needle function.
    Anyway i use this system to scale the position of the needle:
    I scale the factor in the script by multiplying the value for 100 divided for the new total.
    Hope this helps.
    Cheers!

  • My I phone 3gs shuts down suddenlly but when i removed the sim it is working without shutting down suddenlly again when you insert the sim it started shutting down suddenlly

    My I phone 3gs shuts down suddelly but when I removed sim card it started working without sudden shut downs, again when I insert sim card it started shutting down suddenlly.

    I have Satellite A300 and until now everything works OK.
    I would like to know what happen when you remove the battery and use notebook with power supply only. Does notebook shuts down again.
    If not let OS run and put the battery.
    Is the battery recognized properly? Does notebook switch off again?
    To be honest I cannot imagine this issue has something with software or background processes. Recovery image you got with your notebook is designed for this certain notebook mode. Recovery image is tested and I dont think preinstalled OS has anything to do with this.
    Full diagnosis?
    And how to do this? You know very well that diagnosis can be done with diagnostic tools only and such tools have services only. I hope you will find answers but Im 99% sure there is nothing you can do about that. Maybe you should contact service, explain the situation and ask for help.

  • CR XI SDK Printing Services

    Hi Expert,
    My customer have one invoice program which generate invoice document in AS400 machine. This invoice program was written with RPG/CL programming language. However, they having difficulty for print out thier invoices details in Bar Code and Thai Words due to printing issues. Therefore they all looking for Crystal Report SDK whether SDK can call out its printing services in order for print out their invoice document with Bar Code and Thai Words.
    In order to do so, invoices details will be extract in free format data stream file (either in CSV/text format).
    Therefore, we would like to use Crystal Report SDK for read the free format data stream file as data source in order to pass in those invoice details into Printing Services in Crystal Report SDK for print out all of the invoice details including 128 Barcode and Thai words. This technique will not require to create any format report by using Crystal Report XI application, but will using programming language which written in .Net environment.
    My questions are:
    1) In order for us to using Crystal Report SDK Printing Services/Module, does Crystal Report SDK kits can read a free format data stream file in .net programming environment?
    Appreciate if anyone know this could advise.
    Thanks,
    ckchwa

    Please re-post if this is still an issue to the .NET Development - Crystal Reports Forum or purchase a case and have a dedicated support engineer work with you directly

Maybe you are looking for