SDK-UI - Control of the Metadata Refresh Option

When creating metadata the SBO Client need to do a meta-data refresh in order to see new data. In a developers world that is no big problem, but to the customer it means that every time something must be changed, they need to be aware of the Refresh-window (since I closes all windows). Also we canu2019t trigger the metadata refresh form (we only have the option to suppress it while creating data. We should have at least have the option to trigger it, but best solution would of cause to not need it at all).

Similar Messages

How do I change the metadata select options presented in Bridge (Select Value)

Is there a way to set value options on the IPTC metadata? There are preset options that exist on the "Minor Model Age Description" etc, can I set my own values somehow?
Thank you all
Tom

Can I create my own value options for metadata fields? As an example for the IPTC Core/Copyright Status metadata field there are by default three pre-configured options (Unknown, Public Domain, Copyrighted). Can I change these three pre-configured options to say for instance (1 year, Unknown, Unlimited)?
No, you can't.
At least not that I know of in an easy way. And to my opinion you also should not be able to. IPTC is a world standard and many applications use the fields and preset values for search criteria.
If you and others were able to recreate this to personalized versions there would be no standard possible and a lot of applications and/or users/buyers can't find the info anymore
What you might do to add the specialized info about for instance copyright is add this to the other related copyright fields like rights usage terms or even in the copyrights notice (but actually this last field would not be the correct place although it might spring to attention).
Same about age, you can add under or above to the editable model age field.

[svn:osmf:] 13116: Making the control bar's 'stop' button optional ( and toggled off by default).

Revision: 13116
Revision: 13116
Author:   [email protected]
Date:     2009-12-21 04:50:52 -0800 (Mon, 21 Dec 2009)
Log Message:
Making the control bar's 'stop' button optional (and toggled off by default).
Modified Paths:
    osmf/trunk/apps/samples/framework/WebPlayer/html-template/index.template.html
    osmf/trunk/apps/samples/framework/WebPlayer/src/Configuration.as
    osmf/trunk/apps/samples/framework/WebPlayer/src/WebPlayer.as

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

Remove the refresh option in the report bottom - OBIEE 11.1.1.5/6

Hi Gurus,
I have built one report and apply to no result message also. --Everything fine .
My requirement is -->If data is not present then we have to display no result message but here we don't want refresh option in report bottom.
I have applied below java code in to dashboard.
<script type="text/javascript">

</script>
<p><p>
But my Problem is refresh option not displaying entire report.
My Requirement is : If data is present then we have to display refresh option in report below then if data is not present then we don't want to display refresh option in the no result message view ?---- Pls share me it is possible.
Thanks
Edited by: user12301120 on Oct 2, 2012 9:36 PM

Hi Gurus,
Any updates.
Thanks

The lens correction option in Lightroom 5 is for the Tamron 28-75mm lens, rather than the correct Tamron 18-270mm, even though it's correct in the Library metadata. How can I fix this?

The lens correction option in Lightroom 5 is for the Tamron 28-75mm lens, rather than the correct Tamron 18-270mm, even though it's correct in the Library metadata. How can I fix this?

Are you shooting RAW or JPG or some of both?
When you say it won't let you change it, does that mean there are no lens profiles at all, or no lens profiles that match your lens? If you set Auto or Default you can select any lens you want from the list of manufacturers and profiles and then the Setup says Custom. Of course this lens may not be the correct lens, but saying you cannot change it suggests there are no manufacturers or lenses listed on the dropdowns.
Most lens profiles are for RAW only, so if you shoot a mixture of RAW and JPG then for the JPGs the lens profile may not exist. If you are enabling Lens Profiles and have Auto or Default set and it chooses the wrong one then it may just be choosing the top one in the list for Canon if the specific profile doesn't exist for JPGs.
If you are shooting raw and the profile does exist then you should be able to correct the situation: In the list select the correct profile, then choose Setup: Save New Lens Profile Defaults, and select Default from the Setup instead of Auto and it should pick the correct lens every time. Assuming it does do that, then you can set Enable Lens Profiles = checked and Setup: Default and set those as your new Lightroom Defaults and it should pick the right lens.
If you are shooting JPG then the lens profile may well not exist and there's nothing you can do about that except not shoot JPG. If you feel like it you can hack a raw profile to be a jpg profile and put that hacked copy in the user-lens-profile area and LR will see it.

InDesign CS2 won't open: error msg states "Please install the MetaData plug-in and restart"

I'm unable to open my InDesign CS2 program, and am wondering if anyone has any suggestions for me. When I try to open it, I get an error message stating: "Cannot load Adobe InDesign CS2 because it requires MetaData. Please install the MetaData plug-in and restart Adobe InDesign."
It worked just fine last week - I have no idea what happened this week... (other than my 3-yr-old 'playing' with my computer...) I am able to open other CS2 programs like Illustrator and Photoshop. Any ideas for me??

Try trashing your preferences: Hold down Shift + Control + Option + Command immediately after launch. You'll get a dialog asking if you want to delete your preferences. If no dialog comes up you didn't do it fast enough.

User-developed Fan Control for the S10(e)

Hello and welcome.
When you've searched the internet and found this thread, it's possible that you are an owner of a Lenovo Ideapad S10 or S10e which has a little problem with the behaviour and/or the noise of the fan. In this post you will get all the informations you need to handle this problem for yourself. It should also be the same on every S9/S9e.
Just a few comments before we begin:
This is not an official support or solution by Lenovo.
We are just normal users as you are, but we get rid of the fan and wanted to find a way to handle it. So if you want to try anything of the methods described here you have to know that you'll do all this only at your own risk. We are not responsible for any damages of your device. You should only use these methods if you know what you are doing.
Please note that this thread is only for discussing, improving, trouble shooting and perhaps extending the fan control utilities. Any general complaints about the fan problem itself should be placed in the original thread right here: http://forums.lenovo.com/lnv/board/message?board.id=IdeaPad_Netbook&thread.id=795. It already has 80+ pages (the link goes to the first page) and it is better to exclude all the fan control stuff because there it's very difficult to keep an overview.
Here you may post all of your questions, ideas/brainstorming, concerns, thanks and so on and you are really invited to participate and be an active member.
In this first part of this post I'm going to summarize all information about using a fan control utility. For any newbie it will be enough to read this post to get all necessary information. The second part does the same for developement of fan control utilities as we still have no known or working fan control utility for Linux, Mac OS X and other OSs I've forgotten - for now.
For getting started you need a S10 or S10e with an up-to-date BIOS. For the S10 it's the 90 67, for the S10e the 66.
The battery issue
Under very specific circumstances - that we haven't figured out yet - it might happen that your Lenovo S9/10(e) no longer detects the battery while using S10FanControl or S10Fan. It might occur after 2 minutes, it might occur after 2 months, it might never occur. It does not occur using Notebook Hardware Control.
It can be solved by removing the battery, waiting 10 seconds and put it back in. Then the battery is re-initialized and the detection works again.
S10FanControl - Windows
The first utility is S10FanControl created by user dresslerc. The current version is 1.0.0.1, available here: http://www.mediafire.com/file/yd5xmnrnijf/S10FanCtrl1.0.0.1.zip. After you've downloaded it you just have to extract it and start the .EXE in the "Release" folder. Here are the notes and the description dresslerc posted right here:
Everyone,
I've uploaded a version which everyone can use to test with. Remember this is still a TEST version although I think it works for the most part. It should work both on the S10/S10e.
Please install the .NET Framework 2.0 or later first.
Then click here to download the exe: http://www.mediafire.com/?jlg2enkjdxn
Once downloaded, extract the files and hit hte S10FanCtrl.Exe. Once this program launches you should be able to control the fan. Keep in mind that if you lower the fan speed then it'll take upto 30 seconds before the S10 registers the change, so be patient.
I've only tested this on the latest BIOS 59. I am sure it will work on the 57 as well but the individual speeds might not work properly on that version. Please try it out and report back.
The only issue that I heard so far is that occasionally the fan will kick in regardless if in Manual/Smart Mode. Also the temp it shows may not be accurate. If you find any other issues please let me know what they are so I can attempt to fix them.
Once we have all the kinks worked out then I will release the source.
Heres a quick Video: http://www.youtube.com/watch?v=_PKl70ZgmFg
REMEMBER: USE PROGRAM AT YOUR OWN RISK!!! I AM NOT RESPONSIBLE FOR ANY DAMAGES THIS PROGRAM MIGHT CAUSE.
Application Use:
BIOS Controlled - Fan is controlled by the BIOS
Smart Mode - Fan is controlled based on the conifguration in the options. You can set the threshold here at what temp you want the fan to kick in...
Manual - Fan is controlled manually by the slider.
If you want to have the program startup automatically, then place a shortcut of the app in the PROGRAM FILES -> STARTUP folder. Then you may want to go to the options and make the application minimize at startup.
Edit:
It seems there are some issues with the app and the S10e or previous BIOS versions. Will post a fix asap.
The source code for S10FanControl is available here: http://www.mediafire.com/?sharekey=7a3fb99d33817c08c2b435915e8821d7e04e75f6e8ebb871, written in Visual Basic .NET 2008.
S10Fan - Windows
The second utility is a tool written by user slash:
Hi guys,
Well it looks like Lenovo dropped this matter after all. Anyway, I have here another fan controller to add to the bunch. I have been using it for some time now without any problems. It is for both S10 and S10e.
What the program does is basically the same as others. The S10's fan speed is controlled according to the ACPI thermal zone temperature. By over writing the values which resides at offset 50h of the EC register at an appropriate timing, the ACPI thermal zone temperature is over ridden. The program is written in C and uses WinIo created by Sysinternals. The GUI version is available now.
It should be noted that the fan speed temperature thresholds differs with BIOS version. For 14CN67WW and 14CW90WW the fan changes speed at temperatures 60c, 65c, 70c, and 80c. Furthermore, the BIOS will automatically shutdown the S10 if the temperature reaches 90c.
The program has a fail safe mechanism that automatically disables itself if the actual ACPI thermal zone temperature goes above 85c. This allows the BIOS to regain control and the fan will work as intended by Lenovo. If the temperature drops below 85c the program will take over control again.
To run the program, you will need administrative privileges.
Known working BIOS versions: 14cn58ww, 14cn60ww, 14cn67ww, 14cn90ww
The program will work with any BIOS version as long as the BIOS uses the 50h EC register readouts to control the fan.
build 2009.05.24
Higher priorities for EC commands.
Usage: The program will run in the system tray. Double click or right click and use the menu to open the program. To determine the BIOS temperature thresholds, use the 'Setup' button. To run at boot time, place a short cut in the startup folder.
http://www.mediafire.com/file/njhz0icym2t/S10Fan.zip build 2009.05.23
Usage: S10Fan.exe
Added GUI.
build 2009.05.17
Usage: S10Fan.exe 60 65 70 80 70 75 80 85
S10Fan.exe test
The first 4 values are the BIOS temperature thresholds, the latter 4 are new thresholds that we want to over ride with. To determine the BIOS temperature thresholds, use the 'test' option.
build 2009.03.16
Usage: S10Fan.exe 70 75 80 85
-Slash
For updates and newer releases please check slash's post: http://forums.lenovo.com/lnv/board/message?board.id=IdeaPad_Netbook&view=by_date_ascending&message.i...
Notebook Hardware Control - Windows
The third utility is a profile for Notebook Hardware Control. I've adapted it from a profile for the Lenovo N500 which I've found here: http://nhc.yourcopy.de/overview/. With the manual for creating the profiles that can be found here: http://www.notebook-treff.de/board/database/hilfsprogramme-f%C3%BCr-nhc/92-how-to-create-an-acpi-fil... I was able to change the ACPI commands to work on the S10(e).
Installation and setup is divided in two steps. The program Notebook Hardware Control (NHC) is available at http://www.pbus-167.com/. Install the program, but do not start it for now. Then you need my NHCConfig utility, available here: http://forum.eeepcnews.de/download/file.php?id=1476. It detects your model number and BIOS-version via WMI and writes a proper S10(e) profile to the NHC acpi directory. The GUI is German if you have a German Windows and English if not. Additional languages can be added.
After you've extracted the ZIP-file you have to start the nhcc.exe (requires .NET Framework 2.0). At first a message appears that you use the program at your own risk. Then you can choose if you want to apply your own settings (experts) or if you just want the program to run with my defaults (newbies). In the settings window you can see your system details on the left, you can set up your thresholds in the middle and you can set the fan speed you want on the right. Then click on execute.
Now start NHC. Go to the "Settings" tab and click on "Show all NHC options and settings". Then a few more tabs appear. Go to the "ACPI" tab and check if the "ACPI Control System" is running (if everything works, the message "ACPI Control System running" will appear, otherwise it says "ACPI control system is not yet configured for this system"). Now click on "Show ACPI Control System details".
Here you can change the temperature values the fan control depends on (the settings from NHCC are the default values). On the bottom of the window you can see the "Current CPU temperature". That is the value you have to deal with. In general it has a value of around 60°C. In the middle you can see four user editable temperature values. You can leave the values as they are if everything works. The on/off values are responsible for the temperatures at which the fan starts running and stops again after cooling the device. The level values are responsible for the fan speed, for example you can set the off_level higher to let the fan run all the time at the lowest level, if the values do not fit for your device or whatever.
You can switch between NHC and BIOS control by disabling or enabling the "ACPI Control System" or by closing NHC.
Q:
A:
With every utility it is possible that it takes some time until you see an effect after you've started the program. Any failure of the programs should be no big problem because the only thing that should happen is that the BIOS controls the fan. Another issue that might occur due to the way the fan is controlled is that the fan may start running for a very short time and it looks like the fan control has lost control. The fan should stop immediately or at least after a few seconds.
Keep in mind that running the S10(e) with a fan control means that the S10(e) has to deal with higher temperatures. That could mean that the device will not last for 10 years but only 9 years (who uses a netbook so long...?). In every case you need a tool for monitoring your cpu temperature. We know that especially Core Temp 0.99.5 and Real Temp 3.00 do a very good job. That is important because the temperature values you need to set up the fan control are different from the values reported by the cpu sensor, they are between 15°C and 20°C higher. A normal temperature reported by the monitoring should be around 40°C, with the NHC default values the fan starts running at 52°C and stops at 38°C.
Q:
A:
Q:
A:
END using fan control
BEGINNING developing fan control
Controlling the S10(e)'s fan is a litte bit difficult because it looks like there is no way to control it directly. But it is possible to manipulate the temperature the BIOS fan control depends on. As long as the built-in fan control thinks that the cpu is cool enough the fan stays off. And that is exactly the point where we can attack.
The fan control depends on a field called RTMP in the memory of the embedded controller. It can be accessed via "_SB.PCI0.LPCB.EC0.ERAM", the offset of RTMP is 0x50 (hex) or 80 (dec). It is a direct I/O read/write. The complete NHC command for reading the value is: ACPI.FIELD.ReadByOffset("_SB.PCI0.LPCB.EC0.ERAM", ref value, 0x50, 8) with "value" as the variable which gets the value.
What program logic do you need? You need a timer or something else that conducts an always-refresh cycle. It sounds very easy: You read the value, manipulate it and write it back. And it is that easy, you just have to keep some things in mind.
This refresh has to be done very often. The procedure must be very thin and quick. Also the bus that is used to communicate with the EC is a problem, but since the S10e BIOS 66 it became a minor problem for me because it looks like the built-in fan control now depends on some kind of average value over the last few seconds and it doesn't really matter if one write-cycle is failing.
The read-event must be placed before the write-event. Otherwise you just read your manipulated value. The field is filled by the system regularly, so you just have to test if the read_value is different from the written_value, then you know that the field was filled with a "fresh" value. Like "if read_temperatue <> written_temperature then real_cpu_temperature = read_temperature else do nothing".
About the values you have to write back... you will have to test and play a bit. My experience is that you can select three fan levels, starting at 59°, 62° and 70° - at least with the NHC profile and my S10e it's like that. It's some trial 'n' error. My fan stays off at < 59°, but you should select a very low value for fan_off like 30°. In my opinion it switches off much faster the lower the written value is. But it's just a feeling, I haven't measured it.
Q:
A:
Q:
A:
Perhaps some users from countries with other languages than German and English can add tags for "fan", "control" and "noise".
Note from Moderator: Minor edits in title and disclaimer.
Message Edited by JaneL on 04-25-2009 02:32 PM

Great opening post Carsten!
The latest bios:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-71252 (BIOS 66)
The FSB can be reduced from 133MHz to 100MHz using SetFSB, this also reduces the heat:
http://www13.plala.or.jp/setfsb/
clockgen = SLG8SP513V
If you add a shortcut to the startup folder the program will start at startup. Under properties you can change the target to:
"C:\Program Files\SetFSB\setfsb.exe" -s100 -b1 -cg[SLG8SP513V] -w20
So it starts with a FSB of 100Mhz, in the background, with the right clock generator, after 20 seconds.
Message Edited by quazar on 04-25-2009 05:07 AM

How to see all items (more than 50) in the list without scrolling down in the column filter option (as attached)

Hi,
Any help?
Thanks
srabon

You can increate the view limit by modifying existing view and then setting the view item limit. Note that you will get worse performance for larger views of the data.
If you want more control over the filter options you can use the managed metadata filters to provide a more robust filtering system.
Other than that can you provide more detail? Your post isn't that clear.

How to stop the auto refresh in dashboard

i have a BIP Report, i have unchecked the "Auton Run" option in the report properties of BIP reports and uploaded the report to My Dashboard,
when i login into the answers or when i refresh the dashboard page, my BIP Report is executing automatically even though it is uncheck in its report properties and generating the "page not found error"... can any one help me, how can i control the BIP report not to execute it until when we click on click export button....

virajx3006 wrote:
Hey guys,
Anyone know how to stop the auto updater in N900 application manager ?
Coz when i connect via wifi or 3G, it always try to search for updates...Coz of that i cant search the web properly until its over.
Specially when i connect via GPRS, i have to pay more for this extra mega bites use from app manager...
So got any ideas for this prob...?
(I usually use faster app manager to install apps.)
dude check your inbox
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos

How can I turn on the Compatibility View Option?

In viewing a vendor's online reporting, I noticed that the report's header appears on the right, while the report's content appear on the left, creating a confusing viewing.
The vendor has recommended that I turn on the Compatibility View Option, but I cannot find this option anywhere.
Would someone direct me to the section where I can turn on the Compatibility View Option?
Thank you!

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Regd FAST refresh option in a Materialized view

Hi All,
I am using a pipeline function in which I am creating a table of records and a few cursors to fetch data from various tables.
Now this PL/SQL table is being used to construct a Materialized view.
Creation of Materialized view is happening fine but not with FAST refresh option. It gives an error " Cannot create a FAST refresh Materialized view from a complex query."
The query which I have used for the view creation is
CREATE MATERIALIZED VIEW CUSTOM.ABC
PCTFREE 0
BUILD IMMEDIATE
REFRESH FAST ON DEMAND
AS
SELECT A.Number,
A.Guarantors_Number,
A.Guarantors_Name,
A.Personal_Garantee_PCNT,
A.Company, LG.Source_System,
A.Type_of_Info,
A.File_Gen_Date,
A.Periodicity
FROM
TABLE(CUSTOM.CDM_LG_PACK_PF.CDM_LG_FUNC) A;
where CDM_LG_PACK_PF is the package and CDM_LG_FUNC is the pipeline function I have written to fetch all the records.
Please help me on how can I do a FAST refresh on this materialized view.
Thanks in advance,
Gaurav

Welcome to the forum!
FAST refresh doesn't mean that the operation is fast (time wise), it means it's an incremental refresh.
If you have a complex query, you can't use a FAST refresh - that's what the exception tells you.

Message "itunes has stopped working". Itunes opens and can read an audio cd but as soon as the "get information" option is selected the message "itunes has stopped working" and the computer freezes or at least slows to a snail's pace.

Hi,
I have a PC running Windows 7 - 64bit OS. I have had iTunes installed since the beginning of the year on this computer and have not had any trouble with it except actually using iTunes but that is a different issue. The other day I inadvertently downloaded "Tuneup" which I don't want or need. I firstly want to say I have no concrete evidence that Tuneup has led to my problems. It may be coincidental that Tuneup and my problems appeared together.
Tonight when I started iTunes, Tuneup took over a quarter of the screen on the right side. I closed this program. When the list of tracks was ready to be loaded from the CD and I went to" file" - "get info" option the message "iTunes has stopped working" would appear. Closing this message resulted in iTunes shutting down. I should say that before I closed the message the computer had essentially ground to a halt. The other curious thing was the behavour of the mouse pointer on the screen - the only place where it was visible was in the "iTunes has stopped working" box. Moving it out of the message box resulted in it disappearing. It would reappear if it were caused to wander into the message box.
I subsequently removed Tuneup (control panel, programs and features, etc...) iTunes had not improved. I then deleted iTunes, firstly saving the library to a file on the desktop. Then I did a fresh(?) install of ITunes but there seems to be no change. A curious thing was even though I had deleted iTunes through the control panel the library was still there as if I had done nothing. The whole thing is a complete mystery and extremely galling.
If someone has had a similar problem I would really like to know what the fixes were.
Thanks for "listening".
Cheers,
Grant Andrews.

I had a similar problem. I'm using 64bit Windows7. The following solution worked for me:
COPY    QTMovieWin.dll
FROM    c:\program files (x86)\common files\apple\apple application support\
INTO     c:\program files (x86)/iTunes
Also, reinstalling Quicktime has worked for others having this same issue.

How to transfer my iTunes Library from a Mac to a PC and keep all the Metadata?

I need to transfer my music library from my macbook to a desktop PC running Windows 7. I have tried using Home Sharing as well as transfering the whole iTunes folder over using an external hard drive. Neither attempt kept all my metadata. Is there any way to recreate my library on a Windows machine and keep the metadata?

Moving a library: Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its sub-folders and files) intact to the other drive. Hold down the option (alt) key (shift on Windows) and open iTunes. At the prompt to create or choose a library choose the copied iTunes folder.
If this is to a new computer and you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music then you don't even need to start with the option key held down, iTunes will automatically look for it there. (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)

How can I add vocal effects other than the 9 Voice options? (I can't shift pitch)

Hello!
I am making the switch from PC and am just trying to lower the pitch of a vocal track by at least an octave; I just got a MBP last week and am running GB 10.0.2. I can't find any info on similar problems that is helpful; most solutions I've come across show that when the track is selected, there should be a pitch shift bar with a sliding button, but I do not have that. I read a lot of people saying something about the track being purple or not, but I'm not sure if that's relative to the version I have or if that has anything to do with what's happening. When I select the track, in the little area toward the lower left when "Track" is selected, (what is that space called?) where the pitch shift option is for other people, I only have a sliding bar for Pitch Correction, and a checkbox for Limit to Key and Enable Flex. When "Region" is selected, it just shows the name of the region and there are no options. Another question I have is how to change the pitch of midi sounds? When the keyboard is open on the screen I have tried moving the little octave shifter, but it assigns the sounds that are on the keyboard at different locations if I move it, so it changes the sound completely. A couple of them shift one octave up or down, but there are no actual controls..
I'm mostly just dabbling with EDM/trap/Hiphop tracks at the moment, but am confused about whether or not there are other vocal effects and controls other than the preset Voice options in the instrument area (Bright vocal, Classic vocal, compressed vocal, Edge vocal, etc.)? I'm not going to be using GB forever, but are there not any other options like for current rap/trap production (phaser, balance, EQ, auto tune, choppers, actual voice altering effects, etc.) [preferably without buying extra things]? And not only vocals, but editing effects for all sounds.. If so, how do I get to them? And if not I know I should at least be able to lower or raise the pitch of a vocal recording... There are some pretty legit electronic instruments that are exactly the kind of sound I'm going for so I was surprised to not see an equally simple to access vocal effects board or something. Any additional tips for a n00b electronic music producer would also be greatly appreciated! Thank you for any help!

In GarageBand 10 you can no longer change a track with an audio file to a "purple" audio recording, as it has been possible in GarageBand '11.
Even, if you can make the transpose slider visible by enlarging the the track editor panel, the slider will be disabled.
What you can do however, is either add an AuPItch filter from the audioUnit panel or to convert your audio file to loop and to admit from the Loop Browser.
In the new GarageBand you add the AuPitch filter from the Smart Controls.
Enlarge the SmartControl panel by dragging the dividing line upwards, until you see the Audio Units brick, then add an Apple Audio Unit and set it to AuPitch.
Or create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library". You need to trim the filet an exact number of measures.
Set the current key and tempo, name the loop, and save the loop. Make sure, that one-shot loop is not enabled.
Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
You will be able to transpose the sample like any regular loop.

How do I make one control change the entry list of another?

I am using LabView 2010 and would like to create a custom control, in which there are two ring controls (among other things).
The options shown in one ring menu should depend on what option is picked in the other ring menu.
How does one do that?
Solved!
Go to Solution.

Well the data that goes into the two rings will have to be initialised somehow... Or by constant array, or by reading them from file.
If you don't want to change your code, I would defenitly getting the string you want to get from file.
But still, to update the 2 rings, you will have to update the strings in the 2nd control on the fly.
FILE :
[OPTIONS]
Option1=...
Option2=...
[POSSIBLE_SELECTIONS]
Selection1.Parent=1
Selection1.Name=...
Selection2.Parent=1
Selection2.Name=...
This is how you could set up the file. where options are the items which your are going to put in the first ring.
Depending on that selection you will go fill out the names in the second ring depening on which parent is selected in the first ring
Kind regards,
- Bjorn -
Have fun using LabVIEW... and if you like my answer, please pay me back in Kudo's
LabVIEW 5.1 - LabVIEW 2012

SDK-UI - Control of the Metadata Refresh Option

Similar Messages

Maybe you are looking for