SDM Deployment Failed--SDM could not start the J2EE cluster on the DB Host

HI,
I am trying to deploy ESS packges in EP through SDM.But while deploying I am getting this error in SDM at the start itself:-
Error: An error occured while starting a cluster instance.
Oct 14, 2008 5:14:41 PM Error: There is no clutser control instance running on host SBPEPDB1 which is described in SecureStorage
Please check if there is an appropriate running cluster instances
SDM could not start the J2EE cluster on the host SBPEPDB1! The online deployment is terminated.
There is no clutser control instance running on host SBPEPDB1 which is described in SecureStorage
I am pasting the full LOG File details:-
Oct 14, 2008 6:32:00 PM Info: Starting cluster instance processes.
Oct 14, 2008 6:32:00 PM Error: An error occured while starting a cluster instance.
Oct 14, 2008 6:32:00 PM Error: There is no clutser control instance running on host SBPEPDB1 which is described in SecureStorage . The instances, returned by MessageServer [MS host: SBPEPCI1; MS port: 3900], are :
Name:JM_T1223989073901_0_CPCAPP109
Host:SBPEPCI1
State:5
HostAddress:172.17.131.38
Name:JC_CPCAPP109_EPP_01
Host:CPCAPP109
State:5
HostAddress:172.17.131.31
Please check if there is an appropriate running cluster instances.
Oct 14, 2008 6:32:00 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Oct 14, 2008 6:32:00 PM Error: Aborted: development component 'pcui_gp/isr/cfg'/'sap.com'/'MAIN_ERP05VAL_C'/'2515722'/'0', grouped by software component 'SAPPCUI_GP'/'sap.com'/'MAIN_ERP05VAL_C'/'1000.600.0.13.0.20080516101947''/'0':
SDM could not start the J2EE cluster on the host SBPEPDB1! The online deployment is terminated.
There is no clutser control instance running on host SBPEPDB1 which is described in SecureStorage .
The instances, returned by MessageServer [MS host: SBPEPCI1; MS port: 3900], are :
Name:JM_T1223989073901_0_CPCAPP109
Host:SBPEPCI1
State:5
HostAddress:172.17.131.38
Name:JC_CPCAPP109_EPP_01
Host:CPCAPP109
State:5
HostAddress:172.17.131.31
Please check if there is an appropriate running cluster instances.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Oct 14, 2008 6:32:04 PM Info: Starting to save the repository
Oct 14, 2008 6:32:05 PM Info: Finished saving the repository
Oct 14, 2008 6:32:07 PM Info: Starting: Initial deployment: Selected software component 'SAPPCUI_GP'/'sap.com'/'MAIN_ERP05VAL_C'/'1000.600.0.13.0.20080516101947''/'0' will be deployed.
Oct 14, 2008 6:32:07 PM Error: Aborted: software component 'SAPPCUI_GP'/'sap.com'/'MAIN_ERP05VAL_C'/'1000.600.0.13.0.20080516101947''/'0':
Failed deployment of SDAs:
development component 'pcui_gp/isr/cfg'/'sap.com'/'MAIN_ERP05VAL_C'/'2515722'/'0' : aborted
Please, look at error logs above for more information!
I have checked the CONFIGTOOl and the properties seem to be OK.
I tried SHUTTING DOWN all APPLICATION servers & Restarting the DEPLOYMENT,but it still Failed
Pls suggest.
Regards,
Abhijeet
I

Hi George,
Thnx for your reply.
I have stopped all Application servers and kept only the CI-DB instances running.Retried deploying the ESS packages but still getting the same error.
Have checked the Visual admin,it is not in SAFE mode,it working normally.
Have alos checked the CLUSTER Manager Property Values in both Visual Admin & Config Tool,they are alright.
About the Cluster Resources,can you pls specify what exactly do you mean by "Cluster Resources are running or not".
I think if the application servers are stopped,then the Cluster resources shudnt come into play right?? Correct me if I am wrong.
Kindly suggest what other steps I shud take.
Regards,
Abhijeet

Similar Messages

Problem with deploying : SDM could not start the J2EE cluster on the host .

Hello, All
I have following problem with deploying the aplication I get this messenger:
16/09/2008 07:59:44 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : 192.168.0.14
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/PENITU1/LOCALS~1/Temp/temp47114ZChangeRequestDatabase.ear
Result
=> deployment aborted : file:/C:/DOCUME1/PENITU1/LOCALS~1/Temp/temp47114ZChangeRequestDatabase.ear
Aborted: development component 'ZChangeRequestDatabase'/'local'/'LOKAL'/'0.2008.05.03.04.24.17'/'0':
SDM could not start the J2EE cluster on the host Jupiter! The online deployment is terminated. There is no cluster control instance running on host Jupiter which is described in SecureStorage . The instances, returned by MessageServer [MS host: Jupiter; MS port: 3901], are :|Name:JM_T1221612526745_0_penitus15 |Host:PENITUS15 |State:5|HostAddress:192.168.0.205||Name:JM_T1221612357814_0_Jupiter |Host:pfs |State:5|HostAddress:192.168.0.14||Name:JC_Jupiter_JTP_00 |Host:pfs |State:5|HostAddress:192.168.0.14|Please check if there is an appropriate running cluster instances.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Deployment exception : The deployment of at least one item aborted
I dont'n know How do I solver this error?
- I reviewed the virtual memory and I increase the virtual memory
- I restarted the server and the system
- I reviwed the parameter in the config tool --> cluster --> security storage it is OK
Any suggestion for solver this problem
Thanks
Regards
DS

I found this messenger in Additional log information., Please si
17/09/2008 03:04:51 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] INFO:
[004]Additional log information about the deployment
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[C:\usr\sap\JTP\JC00\SDM\program\log\sdmcl20080917200328.log]/>
<!PATTERN[sdmcl20080917200328.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[Cp1252]/>
<!LOGHEADER[END]/>
Sep 17, 2008 1:04:40 PM Info: -
Starting deployment -
Sep 17, 2008 1:04:40 PM Info: Error handling strategy: OnErrorStop
Sep 17, 2008 1:04:40 PM Info: Prerequisite error handling strategy: OnPrerequisiteErrorStop
Sep 17, 2008 1:04:40 PM Info: Update strategy: UpdateAllVersions
Sep 17, 2008 1:04:40 PM Info: Starting deployment prerequisites:
Sep 17, 2008 1:04:40 PM Info: Loading selected archives...
Sep 17, 2008 1:04:40 PM Info: Loading archive 'C:\usr\sap\JTP\JC00\SDM\program\temp\temp62604ZIssueDatabase.ear'
Sep 17, 2008 1:04:41 PM Info: Selected archives successfully loaded.
Sep 17, 2008 1:04:41 PM Info: Actions per selected component:
Sep 17, 2008 1:04:41 PM Info: Initial deployment: Selected development component 'ZIssueDatabase'/'local'/'LOKAL'/'0.2008.04.17.10.53.03'/'0' will be deployed.
Sep 17, 2008 1:04:41 PM Info: Ending deployment prerequisites. All items are correct.
Sep 17, 2008 1:04:43 PM Error: Unable to compare host[Jupiter] and host[PENITUS15] Throwable: java.net.UnknownHostException Throwable message: PENITUS15: PENITUS15
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs: pfs
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs
Sep 17, 2008 1:04:45 PM Info: Saved current Engine state.
Sep 17, 2008 1:04:45 PM Info: Starting: Initial deployment: Selected development component 'ZIssueDatabase'/'local'/'LOKAL'/'0.2008.04.17.10.53.03'/'0' will be deployed.
Sep 17, 2008 1:04:45 PM Info: SDA to be deployed: C:\usr\sap\JTP\JC00\SDM\root\origin\local\ZIssueDatabase\LOKAL\0\0.2008.04.17.10.53.03\temp62604ZIssueDatabase.ear
Sep 17, 2008 1:04:45 PM Info: Software type of SDA: J2EE
Sep 17, 2008 1:04:45 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[PENITUS15] Throwable: java.net.UnknownHostException Throwable message: PENITUS15
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs
Sep 17, 2008 1:04:45 PM Info: Starting cluster instance processes.
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[PENITUS15] Throwable: java.net.UnknownHostException Throwable message: PENITUS15
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs
Sep 17, 2008 1:04:45 PM Error: An error occured while starting a cluster instance.
Sep 17, 2008 1:04:45 PM Error: There is no clutser control instance running on host Jupiter which is described in SecureStorage .
The instances, returned by MessageServer [MS host: Jupiter; MS port: 3901], are :
Name:JM_T1221672404781_2_penitus15
Host:PENITUS15
State:5
HostAddress:192.168.0.215
Name:JM_T1221679486171_0_Jupiter
Host:pfs
State:5
HostAddress:192.168.0.14
Name:JC_Jupiter_JTP_00
Host:pfs
State:5
HostAddress:192.168.0.14
Please check if there is an appropriate running cluster instances.
Sep 17, 2008 1:04:45 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Sep 17, 2008 1:04:45 PM Error: Aborted: development component 'ZIssueDatabase'/'local'/'LOKAL'/'0.2008.04.17.10.53.03'/'0':
SDM could not start the J2EE cluster on the host Jupiter! The online deployment is terminated.
There is no clutser control instance running on host Jupiter which is described in SecureStorage .
The instances, returned by MessageServer [MS host: Jupiter; MS port: 3901], are :
Name:JM_T1221672404781_2_penitus15
Host:PENITUS15
State:5
HostAddress:192.168.0.215
Name:JM_T1221679486171_0_Jupiter
Host:pfs
State:5
HostAddress:192.168.0.14
Name:JC_Jupiter_JTP_00
Host:pfs
State:5
HostAddress:192.168.0.14
Please check if there is an appropriate running cluster instances.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Sep 17, 2008 1:04:45 PM Info: Starting to save the repository
Sep 17, 2008 1:04:46 PM Info: Finished saving the repository
Sep 17, 2008 1:04:47 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Sep 17, 2008 1:04:47 PM Error: -
At least one of the Deployments failed -
Any help will be well received about this problema
Thk
Regards
DS

Deployment SDM could not start the J2EE Cluster on the host nw4host

Hello,
I installed the WAS testdrive on Linux SUSE 9.3 and the SNDS on WinXP.
I am trying to deploy the welcome application from the SNDS and get the following error message:
SDM could not start the J2ee Cluster on the host nw4host! The online deployment is terminated. JStartup Framework ist not able to deliver an information about the cluster control instances! Please check the status of the J2EE Engine.
I can start the J2EE Start page on port 50000, the system info shows that dispatcher, server0 and SDM are running. I can start the visual admin with go, the SDM with RemoteGui and the DeployTool.
The comand startsap check nw4host shows, everythings running:
nw4host:nw4adm 54> startsap check nw4host
Checking ADA db Database
ABAP Database is running
Checking ADA db Database
J2EE Database is running
See logfile JdbcCon.log
Checking SAP NW4 Instance SCS01
Instance SCS01 is running
Checking SAP NW4 Instance DVEBMGS00
Instance DVEBMGS00 is running
Logging in to SAP with the Java Gui, the ICM says:
ABAP Server operational        = TRUE
J2EE Server configured         = FALSE
J2EE HTTP port                 = 50000
J2EE HTTPS port                = 50001
J2EE Server operational        = TRUE
Default root access handler    = ABAP
URL Prefix Table loaded        = TRUE
Any idea where the problem could be ?
Thanks, Manfred.

changed the ip address for nw4host in etc/hosts to the real ip address of the server where application runs

NW4: SDM could not start the J2EE cluster on the host nw4host

Hello,
in NW4 i get this error when i try to deploy the welcome webdynpro:
SDM could not start the J2EE cluster on the host nw4host! The online deployment is terminated. JStartup Framework is not able to deliver an information about the cluster control instances! Please check the status of the J2EE Engine.
I am using NW4 (built 28.9.04) on Suse 9.0 and the corresponding IDE (2.04) on Windows 2000.
In the J2EE view of the IDE everything (SDM, Dispatcher and Server) is green. I can start the examples on port 50000. According to systeminfo everything is running.
I searched in OSS and found Note 738402. But there is no EOF in the SDM-logfile. And when i started the J2EE-Configtool the value for "admin/host/SID" is not localhost.
Any hints?
Regards,
Nico.

Hello,
> Developer Studio -> Preferences -> SAP J2EE Engine ?
of course. Every icon (SDM, Dispatcher and server) is green in the J22E-View of the IDE. I still get this error message.
Regards,
Nico.

SDM could not start the J2EE cluster on the host Error on Deployments

Hi,
We are sudenly getting this Error when trying to make a Deployment in the NWDE:
Settings
SDM host : 10.26.26.198
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/ALMA1.CAR/LOCALS~1/Temp/temp49346WDWFApp.ear
Result
=> deployment aborted : file:/C:/DOCUME1/ALMA1.CAR/LOCALS~1/Temp/temp49346WDWFApp.ear
Aborted: development component 'WDWFApp'/'local'/'LOKAL'/'0.2007.02.16.15.11.28'/'0':SDM could not start the J2EE cluster on the host vmxtbcsapep01! The online deployment is terminated. There is no clutser control instance running on host vmxtbcsapep01 which is described in SecureStorage . The instances, returned by MessageServer [MS host: vmxtbcsapep01; MS port: 3901], are :|Name:JM_T1171660289517_0_ALMACARVAJAL |Host:miriamdragustinovis |State:5|HostAddress:10.21.69.164||Name:JM_T1171656308064_0_vmxtbcsapep01 |Host:cvespinosa |State:5|HostAddress:10.26.26.198||Name:JC_vmxtbcsapep01_CPQ_00 |Host:cvespinosa |State:5|HostAddress:10.26.26.198|Please check if there is an appropriate running cluster instances. (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Deployment exception : The deployment of at least one item aborted
And in the sdm log file we got this kind of errors:
Feb 16, 2007 2:13:46 PM Error: Unable to compare host[vmxtbcsapep01] and host[miriamdragustinovis] Throwable: java.net.UnknownHostException Throwable message: miriamdragustinovis
Feb 16, 2007 2:13:46 PM Error: Unable to compare host[vmxtbcsapep01] and host[cvespinosa] Throwable: java.net.UnknownHostException Throwable message: cvespinosa
Feb 16, 2007 2:13:46 PM Error: Unable to compare host[vmxtbcsapep01] and host[cvespinosa] Throwable: java.net.UnknownHostException Throwable message: cvespinosa
Feb 16, 2007 2:13:46 PM Error: An error occured while starting a cluster instance.
Feb 16, 2007 2:13:46 PM Error: There is no clutser control instance running on host vmxtbcsapep01 which is described in SecureStorage .
The instances, returned by MessageServer [MS host: vmxtbcsapep01; MS port: 3901], are :
Name:JM_T1171656916610_0_ALMACARVAJAL
Host:miriamdragustinovis
State:5
HostAddress:10.21.69.164
Name:JM_T1171656308064_0_vmxtbcsapep01
Host:cvespinosa
State:5
HostAddress:10.26.26.198
Name:JC_vmxtbcsapep01_CPQ_00
Host:cvespinosa
State:5
HostAddress:10.26.26.198
Any Idea what can be wrong? we have even restarted de AIX Server and starting all the services and it is still not working.
Thanx in Advanced!
Gerardo J

Hi Gerardo,
I encountered exactly the same error, but had a different solution as I was expecting from the error-message.
In my case I was forced by the Visual Administrator to change the administration password, since the time was up on it. But as the password for the Visual Administrator is saved within the database, the password for the SDM is stored within the secure store (file-system) and changing the password just in VA will not automatically change it also in the secure store. But since both passwords for the internal usage need to be equalized, I encountered problems afterwards when trying to deploy something and I got the same error message. However the sense of restriction is meant here, the solution on it was rather simple as follows (Just note that you need to enter a dummy-password first, before setting the correct one similar to your visual administrator):
1. create a telnet session to your J2EE using a command line shell
2. enter "jump 0" to get on the correct node within your J2EE
3. enter "add user" to gain access to user-specific commands
4. enter "password <Administrator> <temporarily new password>"
5. exit
6. create another telnet session to your J2EE using a command line shell
7. after succeeded the login, you will now be forced to enter a new password - so enter "password <Administrator> <origin password of the Visual Administrator>"
8. exit
9. now start the config-tool of the engine
10. apply to the DB-default-question with "yes"
11. select the Secure Store on the left
12. select the entry "admin/password/..." that you can see it in the bottom lines.
13. click "Remove" to delete it from the list
14. set the password similar to the Visual Administrator password within the "Value" line (take care as you can not see the digits).
15. click "Add" to add it back to the list
16. click the disc symbol in the top of the UI to save the new password (if you don't get a dialog afterwards that the data has been stored, something may hasn't worked fine when removing/adding the password-entry, in this case repeat the action on it).
17. After exiting the config-tool, you need to restart the entire J2EE.
18. Your hopefully finished by success ;o))
Best regards
Jochen

My iphone can't back up to pc,because a session could not started with iphone.how fix the itunes

my iphone can't back up to pc,because a session could not started with iphone.how fix the itunes or iphone,this problem is after update ios7.0.4 and update itunes.pls teach me fix my pc,my pc is windows vista....

i have this problem too >> but i try other iphone ios7.0.3 i ok and work
but my ios7.0.4 cant back up and keep pop out session could not started with iphone !
really hope someone can help it ..
thank a lot !

*** WARNING: Could not start service 80 for protocol HTTP on host MyFQDN

Hi,
I m configuring an external Sap webdispatcher to point to an ICF service
I need to install it on Windows Web server where others web sites are running.
I configured a specific ip for that on the Web servers and enter the DNS name in our domain.
On the the pfl file I define :
SAPLOCALHOSTFULL=<MyFQDN>
icm/host_name_full =<MyFQDN>
and specify icm/server_port_0 = PROT=HTTP,PORT=80
Each time I m starting it I received *** WARNING: Could not start service 80 for protocol HTTP on host <MyFQDN> .........
If I m using another port (Ex:86)no problem with my FQDN.But if I m doing servername:86 it s working also.
It s seems that the webdispatcher don t care about my FQDN.
How can I have the WEBDISPATCHER pointing to this specific FQDN and not all ?
Thanks,

Hi Damien,
You problem is perfectly logical : It's not possible to have 2 programs (IIS and web dispatcher) listening together on the same 80 HTTP port.
There is no configuration that I know on the web dispatcher to tell him to listen only on one IP address.
Summary : what you want to do is not possible.
I had a similar request and I did the following.
I use a Linux box with an Apache reverse proxy to select to distribute the HTTP requests on different web dispatchers. The rules depends from the called URLs.
Regards,
Olivier

Win OS could not start becasue of error in the software on Satellite A85-S107?

Windows could not start because of an error in the software. Please report this problem as:
Load needed DLLs for kernel.
Please contact your support person to report this problem."
A blue screen was suddenly pop up when i was surfing a website, the above warning in black and white was showed after i took out the battery and restarted the windows.
I thought it was just a simple step if i took out the recovery disk, but i was wrong.
The recovery procedure was doing fine to 100% finished. But after pressing any key, the above warning kept appear, no matter how many times i had re-installed by recovery disk or (every time reached 100% )or by using full version of window Xp.
Neither it worked by formatting the HD I had connected it with a IDE2USB link to my friend's XP laptop nor changing another HD.
I excluded the HD problem, then i guess it might be the BIOS was being hacked (?) I downloaded the BIOS update to see whether it works or not?
but the result was disappointing. It just stop at the step 4 of the updating procedure, it just freeze at performing flash initiating step.
I want to take out the CMOS battery for few seconds, but i am not that pro and i might cause damage by improper handling.
Could anyone tell me what happen to my computer and how i can show the above problem?

Hello Wai
If your unit make troubles after recovery image installation it is probably hardware related issue. Can you enter BIOS settings as usual? If not I am afraid the BIOS chip is damaged. It happen if BIOS update is interrupted whatever the reason can be.
Removing CMOS battery doesnt work like on desktps. Forget it!

SDM Deployment Problem. Could not establish connection to the server.

Hi all,
I am using J2ee Engine 2004s( version )server which is located remotely.I have installed NWDS 7.0.17 in client system & try to deploy an application. I could connect to the J2EE Engine through VPN Connection. but while deploying the application it is giving the following error
Deployment exception : Server XXX did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to server XXX at port 50018: Connection timed out: connect
Inner exception was :
Server XXX did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to server XXX at port 50018: Connection timed out: connect
I have made an host file entry also in my client System. I have used the Lib files also which is mentioned on SAP Note 941150.
still i am getting the same problem. Please bring me the solution to this problem. It would be really helpful.
Regards,
Malar.

Hai,
Check the below link.....
http://help.sap.com/saphelp_nw70/helpdata/en/76/fb72ec091f4bf8a2d8ba321bb7e8d9/frameset.htm
SAP Note: 783965.
Regards,
Yoganand.V

The Sun Java System Application Server could not start

Hello All,
I downloaded the Java Pet Store example from sun's website and followed the instructions for installation. After successful installation, I tried to deploy the project and gave the following error
C:\Documents and Settings\sina\My Documents\Projects\services\nbproject\build-impl.xml:194: Deployment error:
The Sun Java System Application Server could not start.
More information about the cause is in the Server log file.
Possible reasons include:
- IDE timeout: refresh the server node to see if it's running now.
- Port conflicts. (use netstat -a to detect possible port numbers already used by the operating system.)
- Incorrect server configuration (domain.xml to be corrected manually)
- Corrupted Deployed Applications preventing the server to start.(This can be seen in the server.log file. In this case, domain.xml needs to be modified).
- Invalid installation location.
See the server log for details.
BUILD FAILED (total time: 5 minutes 20 seconds)
The link above points to the following line in the build-impl.xml file
<nbdeploy debugmode="false" forceRedeploy="${forceRedeploy}" clientUrlPart="${client.urlPart}" clientModuleUri="${client.module.uri}"/>
Can any one help whats wrong.An early response will be highly appreciated.
Kind Regards.
Hasnain Javed.

Hi,
Maybe you already got this fix but here is a suggestion, a snippet from the readme index,html of the petstore download
# Start the Sun Java System Application Server and the JavaDB database. To do so, open a command prompt and change directory to <javaeesdk.home>/bin and issue the following commands:
asadmin start-database
asadmin start-domain
# Change directory to <petstore.home> and enter the following commands
ant setup
ant run
This will setup, build and deploy the petstore on the application server, and then launch the application homepage in your default browser.
The "ant setup" that you run from <petstore.home> (petstore.home is the directory where petstore is installed or where you unzipped it) will populate the database wth data and setup the proper database tables etc that are used by the application.
hth,
Sean

Sun Java System Application Server could not start

Hi
I have installed JDK1.5 Update1 + netbeans 5.5 with the JBOSS bundle and added the Sun Java System Application Server 9.1.02.
I am creating the EJB-JMS application described at
http://www.netbeans.org/kb/55/ejb30.html
All the steps are followed properly, but while running the project i get the error
The Sun Java System Application Server could not start.
More information about the cause is in the Server log file.
Possible reasons include:
- IDE timeout: refresh the server node to see if it's running now.
- Port conflicts. (use netstat -a to detect possible port numbers already used by the operating system.)
- Incorrect server configuration (domain.xml to be corrected manually)
- Corrupted Deployed Applications preventing the server to start.(This can be seen in the server.log file. In this case, domain.xml needs to be modified).
- Invalid installation location.
D:\MyNBProjects\EJBAPP1\nbproject\build-impl.xml:183: Deployment error:
The Sun Java System Application Server could not start.
More information about the cause is in the Server log file.
Possible reasons include:
- IDE timeout: refresh the server node to see if it's running now.
- Port conflicts. (use netstat -a to detect possible port numbers already used by the operating system.)
- Incorrect server configuration (domain.xml to be corrected manually)
- Corrupted Deployed Applications preventing the server to start.(This can be seen in the server.log file. In this case, domain.xml needs to be modified).
- Invalid installation location.
See the server log for details.
BUILD FAILED (total time: 5 minutes 3 seconds)

Hi Roman,
Sorry for the long wait....
In the mean time I have downloaded NB6.1 (final Release) and JDK 1.6.0_04,added the sjsas-9_1_02 to NB6.1, all are in D:\javak (where previous setup of NB5.5 and jdk1.5 and SJSAS-9_1_02 is AS IS in D:\java)
Current Scenario:
Product Version: NetBeans IDE 6.1 (Build 200805300101)
Java: 1.6.0_04; Java HotSpot(TM) Client VM 10.0-b19
System: Windows XP version 5.1 running on x86; Cp1252; en_US (nb)
Userdir: D:\Documents and Settings\kedar\.netbeans\6.1
Now, when i try to Run the SAME code i get the following error:
Created dir: D:\ProjectsNB\EJBAPP1\dist
Building jar: D:\ProjectsNB\EJBAPP1\dist\EJBAPP1.ear
post-dist:
dist:
pre-run-deploy:
Initial deploying EJBAPP1 to D:\ProjectsNB\EJBAPP1\dist\gfdeploy
Error during incremental deploy: java.lang.NullPointerException
Start registering the project's server resources
Finished registering server resources
java.lang.NullPointerException
at org.netbeans.modules.j2ee.sun.bridge.DirectoryDeploymentFacility.getFileArchive(DirectoryDeploymentFacility.java:264)
at org.netbeans.modules.j2ee.sun.bridge.DirectoryDeploymentFacility.initialDeploy(DirectoryDeploymentFacility.java:168)
at org.netbeans.modules.j2ee.sun.bridge.DirectoryDeployment.initialDeploy(DirectoryDeployment.java:413)
at org.netbeans.modules.j2ee.sun.ide.j2ee.incrdeploy.DirectoryDeploymentFacade.initialDeploy(DirectoryDeploymentFacade.java:218)
at org.netbeans.modules.j2ee.deployment.impl.TargetServer.deploy(TargetServer.java:519)
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:151)
at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:104)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor112.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:277)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:460)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:151)
java.lang.IllegalStateException: cannot find FileArchive class...
at org.netbeans.modules.j2ee.sun.bridge.DirectoryDeploymentFacility.initialDeploy(DirectoryDeploymentFacility.java:170)
at org.netbeans.modules.j2ee.sun.bridge.DirectoryDeployment.initialDeploy(DirectoryDeployment.java:413)
at org.netbeans.modules.j2ee.sun.ide.j2ee.incrdeploy.DirectoryDeploymentFacade.initialDeploy(DirectoryDeploymentFacade.java:218)
at org.netbeans.modules.j2ee.deployment.impl.TargetServer.deploy(TargetServer.java:519)
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:151)
at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:104)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor112.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:277)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:460)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:151)
Deployment error:
cannot find FileArchive class...
See the server log for details.
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:166)
at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:104)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor112.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:277)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:460)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:151)
Caused by: java.lang.IllegalStateException: cannot find FileArchive class...
at org.netbeans.modules.j2ee.sun.bridge.DirectoryDeploymentFacility.initialDeploy(DirectoryDeploymentFacility.java:194)
at org.netbeans.modules.j2ee.sun.bridge.DirectoryDeployment.initialDeploy(DirectoryDeployment.java:413)
at org.netbeans.modules.j2ee.sun.ide.j2ee.incrdeploy.DirectoryDeploymentFacade.initialDeploy(DirectoryDeploymentFacade.java:218)
at org.netbeans.modules.j2ee.deployment.impl.TargetServer.deploy(TargetServer.java:519)
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:151)
... 16 more
Caused by: java.lang.IllegalStateException: cannot find FileArchive class...
at org.netbeans.modules.j2ee.sun.bridge.DirectoryDeploymentFacility.initialDeploy(DirectoryDeploymentFacility.java:170)
... 20 more
BUILD FAILED (total time: 9 seconds)
Thanks,
Kedar.

"Database Log In Failed - TNS could not resolve service name"

Hello.
I have an installation of Oracle 10g Release 2 (10.2) for Microsoft Windows (32-Bit) using WinXP Pro on my computer.
I have also installed the compantion CD on the same machine (In a separate home directory) so that I can use PL/SQL.
I have searched through the forum threads but haven't found any similar problem. The solutions that fixed other peoples problem don't seem to be applicable to mine.
I have created a user 'antagning' and some tables and also some PL/SQL procedures that compile fine. When I request
http://localhost:7777/pls/projekt/firsttest
(firsttest is the procedure. doesn't take any params)
I get the famous
Database Log In Failed
TNS could not resolve service name
Verify that the TNS name in the connectstring
entry of the DAD for this URL is valid.
This is my DAD file:
<location /pls/projekt>
SetHandler pls_handler
PlsqlDatabaseUsername antagning
PlsqlDatabasePassword antagning
PlsqlDatabaseConnectString ORCL
PlsqlAuthenticationMode Basic
PlsqlErrorStyle DebugStyle
</location>
and my tnsnames.ora looks like: (there is only one on the machine so there is no conflicting setups I think)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST =
localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
finally, this is my sqlnet.ora:
# sqlnet.ora Network Configuration File: c:\oracle10g\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
I haven't set any default domain because the database runs on my local computer and not on a microsoft server in a domain. Is that correctly concluded?
I get an OK message when I ping my TNS with "tnsping orcl" (Maybe that information is not relevant in the context)
My webserver is started and is running fine (I think). If I request:
http://localhost:7777/pls/projekt (without any procedure name)
I get the message that no procedure is specified to run so I get some sort of answer from the webserver, so far so right.
When I log in using sqlplus with my own created user account I have to leave the database field empty or the login will fail. If I specify the field with the string orcl
the login will fail. Does that imply that something is not quite right? Maybe that hasn't got anything to do with the failure message.
/Fredrik

Has anyone resolved the problems with using TNSFormat?
As is, I want to move to a shared server setup and to do that I want to use TNSFormat and point to a tns entry which is setup for IPC+Shared connection.
But the Oracle Home that has the Oracle HTTP Server (from the companion CD) does not have SQL*net installed and does not seem to understand TNS.
I have TNS_ADMIN setup, I have ORACLE_HOME_LISTENER poiting to the DB Home.
for the OHS home, using "sqlplus login/pw@ipcshared" works, but "tnsping ipcshared" does not, since tnsping does not exist in the OHS home.
I cannot install SQL*Net from the CD1, since it requires a dedicated/new home and does not want to install in the OHS Home.
The only format that works in a dedicated OHS Home setup is ServiceNameFormat.
Any help or input would be very helpful.
Regards
ps. This is a redhat linux setup.
Message was edited by:
Oli_t

Could not start agent

Hi, I've managed to install SMC3.6 agent on a Solaris 8 platform but I was unable to start my agent. I get "Could not start agent" whenever i invoked the ./es-start -a command.
I've removed SMC3.6 agent and installed with 3.5 and it works. But I still prefer to use 3.6.
Do I require any patches for SMC3.6 agents?

I've tried "sh -x" like you asked me to and I get:
# sh -x
# ./es-start -aOops, I meant "sh -x es-start -a". "sh -x" should
show you every line of the startup shell script as
it's being run. But it looks like you found the
problem anyways...
couldn't load file "pkgsymon.so": ld.so.1: esd:
fatal: relocation error: file
/opt/SUNWsymon/base/lib/sparc-sun-solaris2.8/
liblaccess.so.1.0: symbol free_proflist:referenced
symbol not found
invalid command name "unordered_slice" while
executing "unordered_slice internal value"
invoked from within "source toe-basic.toe"
invoked from within "source base-$file.tcl"I'm no expert with Solaris libraries, but it looks
like the files "pkgsymon.so" or "liblaccess.so.1.0"
can't be found. You said that you had other Solaris 8
systems that run 3.6 fine: can you see where they
have those files:
find /opt/SUNWsymon -name pkgsymon.so
find /opt/SUNWsymon -name liblaccess.so.1.0
...then if they are in the right place (or exist at
all) on the problem box? And does it have a
/opt/SUNWsymon/base/lib/sparc-sun-solaris2.8
directory?
Maybe SunMC detected the wrong version of Solaris on
install or something, and either didn't install the
proper libraries, or put them in sparc-sun-solaris2.7
or sparc-sun-solaris2.9?
Does you root user have different environment
variables set (i.e. LD_LIBRARY_PATH) on the problem
box than on the ones that work?
At this point i'm just guessing: 3.6 is so new I
haven't had a lot of debugging time with it. Worst
case you can call Sun support and yell at them...
(just kidding, please don't do that :) )
Regards,
[email protected]
Hi Mike,
Found the 2 files in the /opt/SUNsymon. Checked and confirmed /opt/SUNWsymon/base/lib/sparc-sun-solaris2.8 is there. Will try touse sunchecktool to see if i need any patch fer that fella.
Anyway, about yelling at the Sun guys. That's a good one! :)
Thanks!

Yesterday I got a message that Firefox is updating, and since then I could not start Firefox again.

I am using WIndows 8 RP. Firefox used to work fine till yesterday. Yesterday I got a message that Firefox is updating, and since then I could not start Firefox again.
As the window starts and crashes there is no way I can see any error message.
I uninstalled Firefox, downloaded, and reinstalled again.
But no use, the problem persists.

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Could not start SDM Server - another Server may be running already

Hi
I have some problems with SDM after upgrade to SP16.
Right now i can't neither start it, nor change password..
it has an error but i don't understand it, because i have only one instance and the server is stopped.
I'm enclosing the error, please, if you have some ideas let me know.
Thank you.
Oct 10, 2006 12:34:29... Error: ERROR: Could not start SDM Server - another Server may be running already.
Oct 10, 2006 12:34:29... Error: Another SDM is running already for this SDM_HOME directory. Exiting. Throwable: com.sap.sdm.client_server.launch.SDMRunningException Throwable message: Another SDM instance is running on this host
Oct 10, 2006 12:34:29... Error: Could not start SDM. Processing error. Return code: 4

A lot of thanks of your answer (both of you)..
None of the prerequisits of the note exists on my system.
"1)There is a started SDM server on the system. All SDM commands have to be executed when there is no started SDM server. Or SDM port is busy by another application."
Server is on red color. I had reseted all tha instance, nobody use it, any applications.
"2)2. The executed command can be run only if SDM is in standalone mode."
Yes, i ran before the next command: Execute :
sdm jstartup "mode=standalone" "sdmhome=C:/usr/sap/<SID>/<Instance>/SDM/program"
"3. SDM port is busy by another application."
the port is only used for sdm wich is off...
Anyway, in order to get the solution, i started with the steps described on the note, but i had a problem with the StopServer.bat
3.Run
StopServer.bat (for Windows)
When i run it, i got another message (i though a similar one):
"Sending shutdown on port 50018
Shutdown failed: SDM currently runs in monolithic mode. Logons cannot be accepted.
Could not shutdown server.
Details: Shutdown failed: SDM currently runs in monolithic mode. Logons cannot be accepted.
Processing error. Return code:4"
Any ideas?
Thank you.

SDM Deployment Failed--SDM could not start the J2EE cluster on the DB Host

Similar Messages

Maybe you are looking for