SDM stops with error return code 4

Hi Experts,
Am installing CI after System copy . Here i had changed SID from WDG to WMG .
Now am getting below error .  Its mostly asking for  permission of file but it came till now more than 100 times .. am frustrated .. any way to short it out .
Info: Update - no information about previously deployed files available. Deploy new files only.
Info: Deploying Fileset Complete / TemplateConfigTool to /usr/sap/WMG/SYS/global/TemplateConfig
Error: Error: Could not extract file working/plugins/webdynproruntime/_webdynpro_conf_adapter.jar from archive /usr/sap/WMG/DV
EBMGS00/SDM/root/origin/sap.com/tc/template_config_tool/SAP AG/0/7.0015.20050509130405.0000/TemplateConfigTool.sda
Error: Additional error message is:
Error: /usr/sap/WMG/SYS/global/TemplateConfig/working/plugins/webdynproruntime/_webdynpro_conf_adapter.jar (Permission denied)
Error: Error deploying Fileset Complete to /usr/sap/WMG/SYS/global/TemplateConfig
Info: ***** End of File-System Deployment tc/template_config_tool *****
Error: Aborted: development component 'tc/template_config_tool'/'sap.com'/'SAP AG'/'7.0015.20050509130405.0000'/'0':
Deployment was not successful
Info: Starting to save the repository
Info: Finished saving the repository
Error: -
At least one of the Deployments failed -
Info: Summarizing the deployment results:
Info: OK: /usr/sap/WMG/DVEBMGS00/SDM/root/origin/sap.com/com.sap.netweaver.coll.appl.gw/SAP AG/0/7.0014.20071113170027.0000/co
m.sap.netweaver.coll.appl.gw.sda
Info: OK: /usr/sap/WMG/DVEBMGS00/SDM/root/origin/sap.com/com.sap.ip.bi.web.preexecution/SAP AG/0/7.0015.20080215133942.0000/co
m.sap.ip.bi.web.preexecution.sda
Info: OK: /usr/sap/WMG/DVEBMGS00/SDM/root/origin/sap.com/com.sap.portal.runtime.admin.log/SAP AG/0/7.0010.20061109164817.0000/
com.sapportals.prt.admin.sda
Info: OK: /usr/sap/WMG/DVEBMGS00/SDM/root/origin/sap.com/com.sap.portal.genericcreatorapi/SAP AG/0/7.0010.20061109164817.0000/
com.sap.portal.genericcreatorapi.sda
Info: OK: /usr/sap/WMG/DVEBMGS00/SDM/root/origin/sap.com/com.sap.ip.bi.conv.dac.res.oqqv/SAP AG/0/7.0015.20080215133942.0000/c
om.sap.ip.bi.conv.dac.res.oqqv.sda
Info: OK: /usr/sap/WMG/DVEBMGS00/SDM/root/origin/sap.com/com.sap.ip.bi.km.documentmigration/SAP AG/0/7.0014.20071120144634.000
0/com.sap.ip.bi.km.documentmigration.sda
Info: OK: /usr/sap/WMG/DVEBMGS00/SDM/root/origin/sap.com/com.sapportals.connectors.bi.systems/SAP AG/0/7.0010.20061109164817.0
000/com.sapportals.connectors.bi.systems.sda
Info: OK: /usr/sap/WMG/DVEBMGS00/SDM/root/origin/sap.com/com.sap.portal.util.threadreporting/SAP AG/0/7.0015.20080215133942.00
00/com.sap.portal.util.threadreporting.sda
Info: OK: /usr/sap/WMG/DVEBMGS00/SDM/root/origin/sap.com/com.sapportals.iviewserver.http/SAP AG/0/7.0013.20070808101344.0000/c
om.sapportals.iviewserver.http.sda
Info: OK: /usr/sap/WMG/DVEBMGS00/SDM/root/origin/sap.com/com.sapportals.builder.pagebuilder/SAP AG/0/7.0015.20080215133942.000
0/com.sapportals.builder.pagebuilder.sda
Info: OK: /usr/sap/WMG/DVEBMGS00/SDM/root/origin/sap.com/com.sap.ip.bi.bexrolecontent

do you made the system copy with SAP supported way's discribed in System Copy Guide ?
https://service.sap.com/~sapidb/011000358700000416812008E.pdf

Similar Messages

  • Console error with GUI , return code -17

    Hi All,
    I have just finished the Installation of SAP IDES 4.7. Installation was sucessful, after that I Installed GUI 640. But when we are starting the Console it is starting without any error which also shows WP table details in run mode. When we logon to gui, console becomes "Yellow" and dispatch process stop with a return code -17.
    Please help.
    Thanks
    Jagat.

    Hi Kaushal,
    Thanks for ur reply. Actually when we started the installation process, and GUI, we have not provide the loopback adapter in the Primary DNS, but Loopback Adapter was properly configured with IP.
    Later on we realised and added the 127.0.0.1 in the Primary DNS. But its still not working. 
    The Log which u have asked for is attached.
    trc file: "dev_w0", trc level: 1, release: "620"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, M
    B 
    B Sat Mar 04 10:18:27 2000
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\usr\sap\TEK\SYS\exe\run\dboraslib.dll' ...
    B  Library 'C:\usr\sap\TEK\SYS\exe\run\dboraslib.dll' loaded
    B  Version of 'C:\usr\sap\TEK\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.112)
    B  New connection 0 created
    M  systemid   560 (PC with Windows NT)
    M  relno      6200
    M  patchlevel 0
    M  patchno    251
    M  intno      20020600
    M  pid        2792
    M 
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2792) [dpxxdisp.c   1016]
    I  MtxInit: -2 0 0
    X 
    X Sat Mar 04 10:18:29 2000
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 0 initializing ....
    X  Using implementation std
    M  <EsNT> Memory Reset enabled as NT default
    X  ES initialized.
    M  calling db_connect ...
    C  Got ORACLE_HOME=D:\oracle\ora81 from environment
    C 
    C Sat Mar 04 10:18:30 2000
    C  Client NLS settings: AMERICAN_AMERICA.WE8DEC
    C  Logon as OPS$-user to get SAPTEK's password
    C  Connecting as /@TEK on connection 0 ...
    C  Attaching to DB Server TEK (con_hdl=0,svchp=06A497E8,svrhp=06A495F4)
    C 
    C Sat Mar 04 10:19:07 2000
    C  Starting user session (con_hdl=0,svchp=06A497E8,srvhp=06A495F4,usrhp=06A913AC)
    C  *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
    [dboci.c      3718]
    C  *** ERROR => CONNECT failed with sql error '1017'
    [dboci.c      9536]
    C  Try to connect with default password
    C  Connecting as SAPTEK/<pwd>@TEK on connection 0 ...
    C  Starting user session (con_hdl=0,svchp=06A497E8,srvhp=06A495F4,usrhp=06A913AC)
    C  *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
    [dboci.c      3718]
    C  *** ERROR => CONNECT failed with sql error '1017'
    [dboci.c      9536]
    B  ***LOG BY2=> sql error 1017   performing CON [dbsh#2 @ 962] [dbsh    0962 ]
    B  ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#2 @ 962] [dbsh    0962 ]
    B  ***LOG BY2=> sql error 1017   performing CON [dblink#1 @ 419] [dblink  0419 ]
    B  ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#1 @ 419] [dblink  0419 ]
    M  ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1098]
    M  in_ThErrHandle: 1
    M  *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   8277]
    M 
    M  Info for wp 0
    M 
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = -1
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    rfc_req = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server sapsrv_TEK_00 on host sapsrv (wp 0)
    M  *  ERROR       tskh_init: db_connect
    M  *
    M  *  TIME        Sat Mar 04 10:19:07 2000
    M  *  RELEASE     620
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        8408
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   672]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  235]
    M  Entering ThSetStatError
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 2792) [dpnttool.c   345]

  • Document control failed due to error in [DOCMGR-CANCEL] with a return code

    i am getting this error while calceling the purchase order "Document control failed due to error in [DOCMGR-CANCEL] with a return code of [OTHER]. "
    I am doing the calcel like this
    Nav: buyer work centre --> order
    searche the po and then
    select order --> cancel then click GO button
    i gave the Reason as Cancel
    communication method: email
    Cancel Requisition: Yes
    Please help on this, its urgent.
    Thanks,
    Vijay.

    Hi Vijay,
    Check this MOS note.
    Cancelling A Standard Purchase Order In Buyer Work Center Results In Error [Docmgr-Cancel] With A Return Code [ID 1338826.1]
    Thanks
    -Arif.

  • Download of adobe creative cloud desktop always stops with error code 207. Trying for 6 hours now. What now?

    Hi.
    I started a Creative Cloud abonement and try to install applications. But the download of the "adobe creative cloud desktop" always stops with error code 207 (No answer from server, try later). I am trying for 6 hours but the problem is still the same. What can I do?
    Thank you,
    Heiko

    Errors 201 & 205 & 206 & 207 or several U43 errors
    -http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • NWCE 7.1 EHP1 installation - server0 stopped with error code 2150

    Hi All,
    ***I try to install NWCE 7.1 EHP1 with Oracle 10.2 on Windows Server 2003 Enterprise X64. On phase 29 of 40 Start Java Engine, it gives me this error:*****
    WARNING[E] 2010-08-11 13:18:27.468
    CJS-30222  Java process server0 of instance MII/J00 increased error count to 1. Giving up.
    ERROR 2010-08-11 13:18:27.593
    FCO-00011  The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|8|0|startJava was executed with status ERROR .
    WARNING 2010-08-11 13:18:27.687
    Could not get property IDs of the JavaScript object.
    ERROR 2010-08-11 13:18:27.687
    FJS-00010  Could not get value for property .
    ****I checked it on MMC and server0 stopped with error code 2150 (Core service start fails on initial startups )*****
    std_server0 is here:
    node name   : server0
    host name   : sapmii
    system name : MII
    system nr.  : 00
    started at  : Wed Aug 11 13:19:10 2010
    JVMX version - Sep  4 2008 23:21:58 - 51_REL - optU - windows amd64 - bas2:106386 (mixed mode)
    (CompilerOracle read from file D:\usr\sap\MII\J00\exe\sapjvm_5\jre\.hotspot_compiler )
    (CompilerOracle exclude com/sun/tools/javac/code/SymbolMethodSymbol overrides)
    The active factory is : com.sap.engine.boot.loader.StandardClassLoaderFactory
    Class loading cache information loaded from package index [D:\usr\sap\MII\J00\j2ee\cluster\bin\index.list]
    Reading kernel properties from kernelProperties.bin file...
       Checked the data for 15 ms
       Read the objects for 93 ms
       Substituted the values for 16 ms
    Finished reading kernel objects for 109 ms
    Startup mode [NORMAL] and action [NONE] read
    AS Java version [7.11.3710.34306.20081117170308] is starting server process [ID7616850] on host [sapmii]...
    Loading [LogManager]... [31] ms
    Loading [PoolManager]... [0] ms
    Loading [ApplicationThreadManager]... [47] ms
    Loading [ThreadManager]... [0] ms
    Loading [ClassLoaderManager]... [32] ms
    Loading [ClusterManager]... [140] ms
    Loading [LockingManager]... [31] ms
    Loading [ConfigurationManager]... [1000] ms
    Loading [CacheManager]... [GC [ParNew: 436736K->8479K(655104K), 0.0153459 secs] 436736K->8479K(5024512K), 0.0154061 secs]
    [47] ms
    Loading [DatabaseManager]... [203] ms
    Loading [SessionManager]... [141] ms
    Loading [LicensingManager]... [16] ms
    Loading [ServiceManager]...
    Initialize components for : 312 ms.
    Resolve components for : 31 ms.
    Load components for 1953 ms.
    Loading services.
    Calculate startup service set for 125 ms.
      Service [r3startup] started. [0] ms / [0] CPU ms
      Service [tc~je~content~classification~handler] started. [0] ms / [0] CPU ms
      Service [webservices] started. [0] ms / [0] CPU ms
      Service [tc~esi~uddi~content~handler] started. [0] ms / [0] CPU ms
      Service [engine.dsr.facade] started. [0] ms / [0] CPU ms
      Service [tc~je~cross~api] started. [0] ms / [0] CPU ms
      Service [engine.lm.log.facade] started. [0] ms / [0] CPU ms
      Service [tc~je~mngt_model~srv] started. [0] ms / [0] CPU ms
      Service [tc~je~security~api] started. [0] ms / [0] CPU ms
      Service [cluster] started. [16] ms / [0] CPU ms
      Service [runtimeinfo] started. [16] ms / [0] CPU ms
      Service [jmx_notification] started. [31] ms / [15] CPU ms
      Service [userstore] started. [47] ms / [0] CPU ms
      Service [memory] started. [63] ms / [15] CPU ms
      Service [timeout] started. [78] ms / [31] CPU ms
      Service [cross] started. [94] ms / [46] CPU ms
      Service [log_configurator] started. [94] ms / [31] CPU ms
      Service [locking] started. [0] ms / [0] CPU ms
      Service [tc~sec~destinations~provider] started. [125] ms / [109] CPU ms
      Service [p4] started. [62] ms / [62] CPU ms
      Service [classload] started. [0] ms / [0] CPU ms
      Service [classload.facade] started. [0] ms / [0] CPU ms
      Service [msp] started. [16] ms / [15] CPU ms
      Service [classpath_resolver] started. [16] ms / [15] CPU ms
      Service [deploy] start ================= ERROR =================
    java.lang.IllegalArgumentException: No enum const class com.sap.engine.services.deploy.container.ComponentReference.SERVu0130CE
         at java.lang.Enum.valueOf(Enum.java:196)
         at com.sap.engine.services.deploy.container.ComponentReference.valueOf(ComponentReference.java:18)
         at com.sap.engine.services.deploy.server.Component.<init>(Component.java:44)
         at com.sap.engine.services.deploy.server.Component.create(Component.java:60)
         at com.sap.engine.services.deploy.server.properties.impl.PropManagerImpl.readStandardAppRefs(PropManagerImpl.java:497)
         at com.sap.engine.services.deploy.server.properties.impl.PropManagerImpl.<init>(PropManagerImpl.java:234)
         at com.sap.engine.services.deploy.server.properties.PropManagerFactory.initInstance(PropManagerFactory.java:27)
         at com.sap.engine.services.deploy.server.DeployServiceFrame.start(DeployServiceFrame.java:56)
         at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:155)
         at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:113)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:60)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260)
    FATAL: Critical shutdown with exit code [2150] was requested due to [AS Java cannot be started; core service [deploy] failed to start]
    ****What is the problem and how can I solve the problem.*****
    Thanks.

    Hi,
      Based on the Java trouble shooting guide 'error 2150' indicates that a core service failed to start. http://wiki.sdn.sap.com/wiki/display/TechTSG/(JSTTSG)(Kernel)ExitCodes. Based on the threads below it could be Oracle listener related.
    Re: FCO-00011 error occurred when install ECC6.0 SR3 IDES on Win2003_X64
    Problem installing JAVA WAS - ERP 7.0 (EHP4) - NW 7.01 - RHEL 5.3 - ORACLE
    HTH.
    O.

  • Sapinst stops with error while installing ess component for Java AS

    Dear experts,
    I really hope you can help me with this one,
    We are installing a ABAP/Java AS development system and sapinst has gone through 75% of all execution tasks nicely,
    but then stopped with error while deploying components for the Java AS:
    ERROR 2009-03-30 13:01:27
    CJS-30156  SDM deployment failed for at least one of the components to deploy.<br> SOLUTION: Check 'C:\Program Files/sapinst_instdir/ERP/SYSTEM/ORA/DISTRIBUTED/AS/CI/callSdmViaSapinst.log' for more information.
    ERROR 2009-03-30 13:01:28
    FCO-00011  The step enableUsageTypes with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|15|0|enableUsageTypes was executed with status ERROR .
    Any help would be really appreciated as I am stuck with this and dont seem to be able to find any information on this one.
    Thanks a lot for your help in advance.
    Here is the crucial part of callSdmViaSapinst.log:
    Mar 30, 2009 12:55:18... Info: Starting: Initial deployment: Selected development component 'ess/bp_ess'/'sap.com'/'MAIN_ERP05VAL_C'/'788220'/'0' will be deployed.
    Mar 30, 2009 12:55:18... Info: SDA to be deployed: D:\usr\sap\DE1\DVEBMGS00\SDM\root\origin\sap.com\ess\bp_ess\MAIN_ERP05VAL_C\0\788220\sap.com_ess~bp_ess.sda
    Mar 30, 2009 12:55:18... Info: Software type of SDA: J2EE
    *Mar 30, 2009 12:55:18... Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) ******
    Mar 30, 2009 1:00:21 PM  Info: Begin of log messages of the target system:
    *09/03/30 12:55:19 -  ************************************************************
    09/03/30 12:58:07 -  Start updating EAR file...
    09/03/30 12:58:07 -  start-up mode is lazy
    09/03/30 12:58:08 -  EAR file updated successfully for 578ms.
    09/03/30 12:58:08 -  Start deploying ...
    09/03/30 12:58:42 -  EAR file uploaded to server for 30641ms.
    09/03/30 13:00:20 -  ERROR: Not deployed. Deploy Service returned ERROR:
                         java.rmi.RemoteException: Cannot deploy application sap.com/ess~bp_ess..
                         Reason: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception during deploy: Failed to deploy archive D:\usr\sap\DE1\DVEBMGS00\j2ee\cluster\server0\.\temp\deploy\work\deploying\reader1238414327258\sap.comessbp_ess.epa
                   The following objects could not be locked: [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess**.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.mx/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.de/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.id/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.jp/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.de/com.sap.pct.erp.es

    Thanks Désirée for your answer and apologies for the late update on this one.
    This issue is resolved now, the reason for the error was a lack of memory which probably triggered a timeout in sapinst. After upgrading the memory to 7GB and re-starting the ABAP+Java AS and resuming sapinst everything went through fine. However, this was hard to spot because the logs wouldn't tell you about the lack of memory but about everything else!
    regards,
    Manfred

  • Java 2 runtime Environment setup failed with a return code of -1

    Hi!
    I have tried to install sdk 1_3_1_01 on Windows 2000 with ServicePack 2 and the error "Java 2 runtime Environment setup failed with a return code of -1" occured. As I saw, a lot of people has the problem but couldn't find a solution on this page!
    Please help !
    Me

    I've installed 1.3.1_01 on both W2K Workstation and Server, no problem. There's a bug report, but no workaround or solution.
    http://developer.java.sun.com/developer/bugParade/bugs/4412291.html
    and it's supposedly 'fixed' in 1.4.0 beta.
    http://java.sun.com/j2se/1.4/fixedbugs/fixedbugs-beta2.html
    You might try installing the beta version
    http://java.sun.com/j2se/

  • TS1539 How do we deal with Error 50 when downloading a movie rental then stopped with error 50 and when I try to resume the downld, it doesn't do it?

    How do we deal with Error 50 when downloading a movie rental then stopped with error 50 and when I try to resume the downld, it doesn't do it?

    Yeah this "fix" is bunk. The movie is downloading just fine, but the extra features is the one giving me this error code. It is NOT my firewall. If it was, then both files wouldn't download. Plus, I already have the firewall "issue" tacked down and fixed. Have had it fixed for months now. No, this is due to the "new" itunes version 11 software. The only conclusion to fix this issue is UPgrading from 11 back to 10.7 which is what I am going to do. This is completely ridiculous! Come on, Apple, get itunes working once and for all, and fire the people responsible for itunes 11, just like you did to the guy who was responsible for apple maps. Thankfully Google came back to the rescue with google maps app.

  • How do you carry out an event if a job finishes with a return code 4?

    Hi
    A job which would complete successfully in SAP via the SM36 scheduler completes with an 'Error' in Redwood CPS because there are errors within the spool and it ends with a return code 4.
    We don't want this to error in Redwood CPS, so we have set the return code mapping to Completed with entries of 0 and 4.
    I.e. whether or not there is an error in the spool, the job will complete successfully in Redwood CPS.
    However, we want to be alerted if there are errors in the spool.
    How do we do this? The manual says "A job can raise one or more events when the job gets a specific job status or return code" - where is this set? I can see on the 'Event' tab of a job definition you can raise an Event when the job enters a specific status, but I only want to raise an event (or carry out a step / send an email etc) if I get a return code 4 (none of the job statuses are relevant) - how can I do this?
    Thanks
    Ross

    Hi Anton
    Thanks for that. However, it's a bit more complicated...
    I have a job chain with 2 steps. Any one of the two steps can have an error in the spool which by default in Redwood CPS result in the job ending in status Error. I don't want this, as the second step should still run if the first step ran okay with with errors in the spool (but shouldn't run at all if the 1st step fails completely). I.e. setting 'on Error goto step 2' or having no dependancy at all is not what we want.
    Therefore, I set the return code mapping on Completed to return codes 0 and 4. I.e. if step 1 has an error in the spool (return code 4) it still ends as 'Completed' and step 2 runs.
    Our problem is that we want to be alerted if there is a return code 4 (error in the spool). I tried as you suggested by entering on the 'Raise Event' tab of the job chain to raise an event on status 'Error' with a return code of 4. But no event was raised. I think this is because the return code mapping is setting the status to 'Completed' (on return code 0 or 4) BEFORE the software checks the status; i.e. the status is actually 'Completed' (rc=4) and not 'Error' (rc=4) so an event is not raised.
    Ideally I want to set the Event to be raised on status 'Completed' with a return code 4 - but when I select 'Completed' the 'Error Code' box is greyed out.
    I.e. can't set this - I can only set on a generic 'Completed' and I don't want to raise a message if the status is Completed but the return code is 0....
    Any ideas??
    Ross

  • Error in Webservice Call HTTP error (return code 404, message conn failed)

    Hi
    We wish to call  a standard EP7 webservice through ABAP.
    When we try to create consumer proxy , we get the following error.
    HTTP error (return code 404, message "conn failed")
    Message no. SPRX090
    ==> Display Error Document
    If you want to generate a proxy for an external WSDL document by specifying a URL, check that the proxy settings of the system are correct (transaction SICF - Client - Proxy Settings). If you want to generate a proxy for an XI Repository object, check the connection to the Enterprise Services Builder as follows:
    Check List for Setting Up a Connection to the Service Repository
    1. The address of the Enterprise Services Repository must be known in the SAP system
    Check with report SPROX_CHECK_IFR_ADDRESS
    The address is taken from the following parameters in the exchange profile ('Connections' section):
    com.sap.aii.connect.repository.name: Server (for example,pwdf0436)
    com.sap.aii.connect.repository.httpport: Port (for example, 1080)
    com.sap.aii.connect.repository.contextroot: Root (for example,rep)
    The logon data is also read from the exchange profile ('ApplicationSystem' section):
    com.sap.aii.applicationsystem.serviceuser.name: User
    com.sap.aii.applicationsystem.serviceuser.pwd: Password
    As an alternative to using the exchange profile, you can maintain the RFC destination SAP_PROXY_ESR. If this RFC destination is maintained it will be used by the proxy generation in place of data from the exchange profile to access the Service Repository. In this case, the Exchange Profile will even not be read.
    The RFC destination has to be set up using transaction SM59 and should look like this:
    RFC Destination: SAP_PROXY_ESR
    Connection Type: G (HTTP Connection to External Serv)
    Description1: ESR for Proxy Generation
    Target Host: esr_host
    Service No: 1080
    Path Prefix: rep
    Logon and Security:
    Basic Authentication: active
    User: esr_user
    Password: esr_password
    2. The HTTP Framework of the Web Application Server must function
    Check with report SPROX_CHECK_HTTP_COMMUNICATION
    If necessary, contact your system administrator. Please be aware of the fact, that the HTTP framework is depending on the application server. Thus the result of the report may differ for different application servers.
    3. Proxy generation must interpret the data of the Enterprise Services Repository correctly
    Check with report SPROX_CHECK_IFR_RESPONSE
    you can also login in dev and go to Xn se91
    enter msg id SPRX and msg no 090
    select the message and click on long text..
    you get the same message in a formatted manner..
    How to get rid of this ?
    Regards
    Rajendra

    Hi
    we have given the correct path as we have tested the webserive from
    other technology (.net) by providing the same path.
    regards
    Rajendra

  • Upgraded pc to ios7 but when syncing to iphone 4 it crashed. Phone is now in recovery mode but it nearly finishes recovery then stops with error 3014. Phone rendered useless until this is fixed. Help pls?

    Upgraded pc to ios 7 but when syncing to iphone 4 it crashed. Phone is now in recovery mode but it nearly finishes recovery then stops with error 3014. Phone rendered useless until this is fixed. Help pls? I have tried many of the suggestions for the error code given. Im getting frustrated. I'm not a techno so would appreciate simple terms or ways of explanation. Thx!!

    I have the exact same issue right now!

  • DBM Error return code -11 in LC10 Administration in SCM System Live Cache

    Hello,
    We have installed SCM 4.1 on Solaris on one box and LC 7.5 on another solaris box.
    For kernel upgrade, we shut down Live Cache using LC10>administration on SCM server. After kernel patch, other patches for ABAP stack, we upgraded LC to SP11 build 35.
    Since then, we get following error in LC10.
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Name and Server : LCA - gva1073
    DBMRFC Function : DBM_EXECUTE
    Command : dbm_version
    Error : DBM Error
    Return Code : -11
    Error Message : tp error: Terminating. [nlsui0.c 1934] pid
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Also, in DB59, when we try to check connection, we get following error -
    General Connection Data
    Connection Name....: LCA
    Database Name......: LCA
    Database Server....: gva1073
    tp Profiles........: no_longer_used
    DBM User...........: CONTROL
    Test Scope
    1. Execute an external operating system command (DBMCLI)
    2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC
    command mode)
    3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC
    session mode)
    4. Test the SQL connection (Native SQL at CON_NAME)
    Application Server: gva1075_SCD_03 (
    SunOS )
    1. Connect. test with "dbmcli db_state"
    Successful
    2. Connect. test with command mode "dbmrfc db_state"
    Unsuccessful
    dbm_system_error
    Name and Server : LCA - gva1073
    DBMRFC Function : DBM_EXECUTE
    Command : db_state
    Error : DBM Error
    Return Code : -11
    Error Message : tp error: Terminating. [nlsui0.c 1934] pid
    3. Connect. test with session mode "dbmrfc db_state"
    Unsuccessful
    dbm_system_error
    Name and Server : LCA - gva1073
    DBMRFC Function : DBM_CONNECT
    Error : DBM Error
    Return Code : -11
    Error Message : tp error: Terminating. [nlsui0.c 1934] pid
    4. Connect. test with "native SQL" ( LCA )
    Successful
    ++++++++++++++++++++++++++++++++++++++++++++++++++++
    Can anybody please help?
    Thanks and regards,
    Vaibhav

    Hello Vaibhav,
    while using transaction LC10, the error 11 "tp error: Terminating. [nlsui0.c ...]" occurs. The user authorization with tp fails and the application server cannot connect to the liveCache.
    I assumed, that it's due to a library version mismatch, tp cannot use the liveCahe UNICODE libraries.
    Please check, that the tp call at the command line works properly. And a dbmcli call in the transaction SM49 with the tp options
    (dbmcli ::
    -d <LC-SID> -n <LC-servername> -tpp <profile> -tpi <system-SID>
    -tpc <connection - LCA/LDA> dbm_version)
    works also properly.
    I recommend you to update the liveCache client software on the Application server.
    If you've got access to OSS/Service Market Place, then please take a look at note
    649814 how to update the liveCache client software on the application server.
    < Please also review the SAP notes 847736 & 831108 > 
    Before the liveCache client version will be upgraded on the application
    server you can use the workaround by switching off the central authorization for the liveCache LCA/LDA connections:
    In transaction LC10, choose Integration and deactivate the option Central authorization, then save.
    If you are the official SAP customer, I recommend you to create the ticket to SAP on 'BC-DB-LVC' queue.
    Thank you and best regards, Natalia Khlopina

  • DBM_CONNECT error, return code -11, tp error

    Hello
    I have an SCM 5.0 ABAP-only system (sid=APC) not correctly communicating with a 7.6.0.3 liveCache.  In transaction LC10, clicking the monitoring button for any DB connection results in:
    Name and Server     : LPC - dngdbs07                         
    DBMRFC Function     : DBM_CONNECT                            
    Error               : DBM Error
    Return Code         :        -11
    Error Message       : tp error: sapparam: SAPSYSTEMNAME neithe
    Notice how error message is cut off ...
    1.  LCA, LDA, and LEA connection tests in DB59 all fail with the same error.
    2.  From transaction SM49, dbmcli -d LPC -n dngdbs07 -tpp no_longer_used -tpi APC -tpc LCA <any command> fails with the same error.
    3.  From the command-line, dbmcli -d LPC -n dngdbs07 -tpp no_longer_used -tpi APC -tpc LCA <any command> succeeds for both apcadm and SAPserviceAPC users.  (ABAP system is Windows, liveCache system is HP-UX.)
    4.  RFC destinations SAPDB_DBM, SAPDB_DBM_DAEMON, and SAPXPG_DBDEST_<HOSTNAME> are all successful.
    5.  I un-checked the Central Authorization checkbox in LC10 --> Integration and the error goes away, so I can then see the liveCache system status.
    I tried debugging the ABAP and it appears sapxpg is having trouble calling the external command when Central Authorization is enabled.  Does anyone have any ideas about what's wrong with this? 
    SAP_BASIS SP 14
    NW 700 kernel patch 159
    non-unicode
    Thanks

    > Name and Server     : LPC - dngdbs07                         
    > DBMRFC Function     : DBM_CONNECT                            
    > Error               : DBM Error
    > Return Code         :        -11
    > Error Message       : tp error: sapparam: SAPSYSTEMNAME neithe
    >
    > Notice how error message is cut off ...
    Ok, the cutoff is just due to the error handling routine - I believe the full error message would be "SAPSYSTMNAME neiter in environment or parameterfile specified" or something like this.
    > 1.  LCA, LDA, and LEA connection tests in DB59 all fail with the same error.
    Of course they do - they are all the same connection setup, just for different purposes.
    > 2.  From transaction SM49, dbmcli -d LPC -n dngdbs07 -tpp no_longer_used -tpi APC -tpc LCA <any command> fails with the same error.
    Of course it does. The TP is used to get logon data from the SCM database (central authorization) for the logon to the liveCache. with the -tpp -tpi -tpc arguments you tell dbmcli to use TP.
    > 3.  From the command-line, dbmcli -d LPC -n dngdbs07 -tpp no_longer_used -tpi APC -tpc LCA <any command> succeeds for both apcadm and SAPserviceAPC users.  (ABAP system is Windows, liveCache system is HP-UX.)
    Well, perhaps you've  a different environment setup here? On Windows it's a quite common issue that everything works fine as <SID>adm but the SAP workprocesses run as SAPSERVICE<SID> ... so checking the environment variables for both might be a good idea.
    > 4.  RFC destinations SAPDB_DBM, SAPDB_DBM_DAEMON, and SAPXPG_DBDEST_<HOSTNAME> are all successful.
    Sure - they've nothing to do with TP. Instead these are just calls to the dbmcli command. SAPDB_DBM is just running one command and returning the result, where SAPDB_DBM_DEAMON is used for multiple commands in one DBM session.
    > 5.  I un-checked the Central Authorization checkbox in LC10 --> Integration and the error goes away, so I can then see the liveCache system status.
    Also quite clear - TP is only used with dbmcli when central authorization is used. If it's not used, then XUSER data is used to connect to the liveCache.
    > I tried debugging the ABAP and it appears sapxpg is having trouble calling the external command when Central Authorization is enabled.  Does anyone have any ideas about what's wrong with this? 
    As already said: check the environment variables. Also check the Transportprofile (TMS).
    If you don't succeed: open a support message.
    regards,
    Lars

  • How to consume web service in WDP ABAP ---HTTP error (return code 404, mess

    Hi,
    Am trying to consume a web serivce in WDP where I got error HTTP error (return code 404, message "conn failed")in sdn i came to know that it could be resloved by giving the IP address of the host but in case it is not the web services am using are the external links.
    kindly help me to sort it.
    Regards
    Raj

    hi,
    in addition to above thread
    refer this too
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0d4aa08-beed-2a10-fab2-ad975cead04a
    bvr

  • J2EE Engine Stopped with Error 11113

    Hi All,
    After I changed some values in the Portal UME to connect to ECC 6.0, after the restart of cluster the J2EE is not coming up and getting stopped with Error 11113.
    I have changed the Datasource to ABAP and tried resetting the values in Configtool as per the previous threads in the forum but could not get my J2EE engine up.
    Please find the last some last line of "std_server0.out" file:
    stdout/stderr redirect
    node name   : server0
    pid         : 3456
    system name : EP7
    system nr.  : 01
    started at  : Wed May 07 12:35:19 2008
    Reserved 1610612736 (0x60000000) bytes before loading DLLs.
    [Thr 5340] MtxInit: -2 0 0
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    SAP J2EE Engine Version 7.00   PatchLevel is starting...
    Loading: LogManager ... 562 ms.
    Loading: PoolManager ... 16 ms.
    Loading: ApplicationThreadManager ... 203 ms.
    Loading: ThreadManager ... 62 ms.
    Loading: IpVerificationManager ... 16 ms.
    Loading: ClassLoaderManager ... 16 ms.
    Loading: ClusterManager ... 234 ms.
    Loading: LockingManager ... 250 ms.
    Loading: ConfigurationManager ... 2203 ms.
    Loading: LicensingManager ... 31 ms.
    Loading: CacheManager ... 172 ms.
    Loading: ServiceManager ...
    Loading services.:
      Service memory started. (31 ms).
      Service runtimeinfo started. (172 ms).
      Service cafeucc~api started. (281 ms).
      Service cross started. (219 ms).
      Service timeout started. (156 ms).
      Service file started. (500 ms).
      Service userstore started. (78 ms).
      Service jmx_notification started. (94 ms).
      Service trex.service started. (156 ms).
      Service p4 started. (282 ms).
      Service classpath_resolver started. (46 ms).
      Service log_configurator started. (7172 ms).
      Service locking started. (0 ms).
      Service naming started. (515 ms).
      Service http started. (703 ms).
      Service javamail started. (297 ms).
      Service failover started. (219 ms).
      Service appclient started. (203 ms).
      Service ts started. (250 ms).
      Service jmsconnector started. (297 ms).
      Service licensing started. (32 ms).
      Service cafeugpmailcf started. (281 ms).
      Service connector started. (531 ms).
      Service webservices started. (953 ms).
      Service iiop started. (672 ms).
      Service deploy started. (20344 ms).
      Service MigrationService started. (47 ms).
      Service bimmrdeployer started. (16 ms).
      Service configuration started. (31 ms).
      Service dbpool started. (2453 ms).
    May 7, 2008 12:35:57 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_78] Fatal: User Management Engine (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to connect to the ABAP backend system. Check that connection data are correct and the backend system is available. Error message: "'password' missing". Connection data (obtained from properties of UME service in section "ume.r3.connection.master.": "{
      receiverid_guest=master
      poolmaxwait=10000
      client=800
      user=sapuser
      sysnr=02
      poolmaxsize=10
      ashost=SAP4
      receiverid=master
    May 7, 2008 12:35:57 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_78] Fatal: Initialization of UME persistence adapter "R3_DATASOURCE" failed.
    May 7, 2008 12:35:57 PM   com.sap.security.core.InternalUMFactory [SAPEngine_System_Thread[impl:5]_78] Fatal:
    May 7, 2008 12:35:57 PM   com.sap.security.core.InternalUMFactory [SAPEngine_System_Thread[impl:5]_78] Fatal:
      service com.sap.security.core.ume.service ================= ERROR =================
    Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='UME initialization failed.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key UME initialization failed.
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:346)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:211)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:142)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:105)
    Caused by: com.sap.security.api.UMException: Could not initialize principal factory class 'com.sap.security.core.imp.PrincipalFactory'!: Could not instantiate principal factory class 'com.sap.security.core.imp.PrincipalFactory'!: 'password' missing
         at com.sap.security.core.InternalUMFactory.initializeClass(InternalUMFactory.java:1258)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:302)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:251)
         ... 6 more
    com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='UME initialization failed.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key UME initialization failed.
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:346)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:211)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:142)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:105)
    Caused by: com.sap.security.api.UMException: Could not initialize principal factory class 'com.sap.security.core.imp.PrincipalFactory'!: Could not instantiate principal factory class 'com.sap.security.core.imp.PrincipalFactory'!: 'password' missing
         at com.sap.security.core.InternalUMFactory.initializeClass(InternalUMFactory.java:1258)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:302)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:251)
         ... 6 more
    [Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    May 7, 2008 12:35:57 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_78] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    Please take a look and help me in resolving this problem. Do let me know you need anymore other logs for analysis ?
    Regards,
    Srikar

    Hi Karthik,
    I have checked all the UME properties and are fine. I am trying to connect to ECC 6.0 Clnt 800 with Communication user I created called "portaluser" and the pwd along with system number and application host.
    I tried giving all the details in Configtool > Ume properties but again the same problem J2EE is getting stopped with the same error.
    About the SAPJSF user, it has been created while installation as a Dailog user in the EP system. I logged into the EP system and checked that in SU01. It there but not as a communication user but as a Dialog user.
    Can you let me know what could be the issue ?
    Regards,
    Srikar
    Edited by: Srikar Vankadaru on May 8, 2008 7:59 PM

Maybe you are looking for