SDN user SEARCH & Fav. User list

1.How do I search for a particular user in SDN (especially one who has not yet posted anything).
2.How does one know who has added them to their favourate user list

Hi MM1512,
Your name sound like C-3P0 are you an android? Just kidding.
Rich is right, to protect your privacy is of highest priority for us. This is why you can't search for SDNers that have not posted on SDN.
We may refine this with an opt-in list. You will be able to select in your profile, that you are available in the SDN contact list.
It will be similar to the new check-box in your profile where you can mark your interested in the BPX-community.
Hope this helps, Mark.

Similar Messages

WhoIsWho User Search fails (User 30,000)

Hi All,
 We have a EP 7.0 SR1 Portal.
We have configured the UME for 5 different LDAP's. We have around 30,000 users.
WhoIsWho search Iview fails to get the results.
PS: We have already set the ume.admin.search.maxhits parameter into the
config tool to 30,000.
Regards
Sunil Kulkarni

Hello Carsten,
 I am not sure, how to exactly locate the perticular error details.
Following information from default.trc seems to be relevent:1
Error##Java###failed to fetch key from ResourceBundle
[EXCEPTION]
#1#java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key DS_CORP_LDAP_SCAN
 at java.util.ResourceBundle.getObject(ResourceBundle.java:325)
 at java.util.ResourceBundle.getObject(ResourceBundle.java:322)
 at java.util.ResourceBundle.getString(ResourceBundle.java:285)
 at com.sap.security.core.util.ResourceBean.get(ResourceBean.java:91)
 at com.sap.security.core.jmx.impl.CompanyPrincipalFactory.localizeDatasourceId(CompanyPrincipalFactory.java:708)
 at com.sap.security.core.jmx.impl.JmxServer.getDatasources(JmxServer.java:682)
Regards
Sunil

Prevent users from printing the List of Business Partner window

Hi All
I have had this request and not sure if it possible.
He wants to prevent the users from printing the List of business partner.
That is when you do a search on the marketing documents.
when do a search it brings up the window, List of Business Partners.
they can go to file print...choose table and print the list of BP.
is there anyway to prevent that?
Thank you
Jerusha

is it a smartform
You have to disable from ADOBE end
sfpoutputparams-NOPRINT = X
when calling the function module FP_JOB_OPEN.
Unfortunately the PDF converter, which converts the output
of a Smartform, does not allow to disable the print button.
Please see note 841850 about this. Only the PDF-based forms
support this features (class CL_FP_PDF_OBJECT also belongs
to the PDF-based forms).

Search for users in a particular LDAP through Web Dynpro code...

Hi Experts,
Let me try explaining my problem. In my project we are using two ADAM LDAPs. One for storing internal users and the other for storing external users. I have configured the portal to connect to both the LDAPs. I am able to search for the users created in both the LDAPs through portal Indentity Management.
I am trying to search for the users in a specific LDAP through Web Dynpro coding... I am not lucky enough to get it done. Let me explain you what I did.
I created a custom attribute for UME through config tool. Gave a physical mapping for the custom attribute in dataSourceConfig_xxx.xml to the LDAP attribute distinguishedName which returns the distinguished Name for the user in ADAM LDAP.
For Example: Custom attribute in UME is ldapuser which is mapped to distinguishedName attribute in ADAM LDAP in dataSourceConfig_xxx.xml.
When I do a search for the users in a particular LDAP, I am trying to put a filter to the newly created ldapuser attribute to distinguish between the two LDAPs.
The search will result if I pass the value as '*'. If I try to specify the user path for the LDAP in this attribute it doesnt result any data.
For example:
userSearchFilter.setSearchAttribute(
     "com.sap.com.cust.admn",
      "ldapuser",
     "OU=16482515,OU=Members",
     ISearchAttribute.LIKE_OPERATOR,
     false);
The above code will not return the data, whereas
userSearchFilter.setSearchAttribute(
     "com.sap.com.cust.admn",
      "ldapuser",
     ISearchAttribute.LIKE_OPERATOR,
     false);
Will result with user list from both the LDAPs.
If anyone tried searching for users in a particular LDAP through code, please help me with this issue.
Thank you in advance.
Regards,
Rekha Malavathu

I just figured it out. Under "group-policy GroupPolicy_COMPANY_SSL_VPN attributes", I had to add "vpn-simultaneous-logins 15". Apparently, it was using the value "vpn-simultaneous-logins 0" under the NOACCESS group policy.

How can you permanently add a new field to the Advanced User Search?

We have a number of USR UDF attributes that need to be used in the Advanced Search: Users window. These will be used very often so we would rather not require our Admins to have to select the Add Fields button, scroll down to the attribute they want, then enter the value to search on. We would much rather modify that Advanced Search screen such that the custom attributes we want to search on are listed permanently on that screen. I think there is a way to configure this but I just can't seem to find it.
Any help would be much appreciated.
Thank you.
-Dave Herrmann

The first suggestion here, http://docs.oracle.com/cd/E21764_01/doc.1111/e14308/conf_mangmnt.htm#CHDIEFGD, only allows me to add the UDF attribute to the Add Fields drop down list. It doesn't put the attribute on the screen by default. I was trying to avoid having our Admins select that attriubute from the Add Fields drop down list since they will be searching on this attribute pretty much all the time.
The second suggestion was to open up one of the OIM jar files and modify an xml file and then zip it back up. This will be overwritten on each OIM Bundle Patch so I really don't tlhink we can use that approach.
So, this is it? What I'm trying to do can't be done through a standard lookup change or something?
-Dave
Edited by: user552098 on May 2, 2012 8:39 AM
Edited by: user552098 on May 2, 2012 8:40 AM

RE: (forte-users) search and replace within aTextData

Welll, you're both right. The MoveToChar makes it unnecessary (if a little
sloppy) to MoveNext as long as you've changed the character. thus,
outStr: TextData = new;
outStr.SetValue(inStr);
while (outStr.MoveToChar(' ')) do
outStr.ReplaceRange('_', outStr.Offset, outStr.Offset+1);
end while;
return outStr;
works fine to change blanks to underscores.
Regards,
David
-----Original Message-----
From: Campbell, Dave [mailto:DCampbellpurolator.com]
Sent: Friday, 14 January 2000 0:58
To: 'Matthew Middleton'
Cc: kamranaminyahoo.com
Subject: RE: (forte-users) search and replace within a TextData
If you do not use the MoveNext method to skip beyond the "found" character,
a subsequent invocation of MoveToChar will find the same character, located
at exactly the same offset.
If there is no match, MoveToChar returns FALSE and the current offset does
not change.
----- Original Message -----
From: Matthew Middleton <mathew.middletonlawpoint.com.au>
To:kamranaminyahoo.com
Unless I'm missing something here...you needn't go through every
character...use MoveToChar()...as per Help...
while (TextdataObj.MoveToChar (' ')) do
end while;
Regards,
Dave Campbell
Consultant,
Caro Systems Inc.
Mailto:Dave.CampbellCaroSys.com
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.sageit.com

Why not this:
while myText.moveToString(' ') do
myText.ReplaceRange('-', myText.Offset, myText.Offset+1);
end while;
or if you prefer verbosity:
while myText.moveToString(source=' ') do
myText.ReplaceRange(source='-', startOffset=myText.Offset,
endOffset=myText.Offset+1);
end while;
-----Original Message-----
From: FatchJeBAM.com [mailto:FatchJeBAM.com]
Sent: Wednesday, January 12, 2000 2:51 PM
To: Troy.Burnsvacationclub.com; kamranaminyahoo.com
Subject: RE: (forte-users) search and replace within a TextData
How about this?? May have to play with start/end on ReplaceRange as I
didn't really test this
Anybody got a better way??
-- replace space with underscore
For x in 1 to myTextdata.LengthToEnd() do
If myTextData.IsSpace() then
MyTextdata.ReplaceRange('_'. Startoffset=myTextdata.offset,
endoffset=myTextdata.offset+1);
End if;
MyTextdata.MoveNext;
End for;
Jerry Fatcheric
-----Original Message-----
From: Burns, Troy [mailto:Troy.Burnsvacationclub.com]
Sent: Wednesday, January 12, 2000 9:40 AM
To: kamranaminyahoo.com
Subject: (forte-users) search and replace within a
TextData
Hello all,
I need to search within a textdata object, replacing all
occurrances of a
space
with another character. Can you give a quick code example
of how I would do
this?
Thanks in advance,
Troy
Troy Burns
Marriott Vacation Club Intl.
E-mail: troy.burnsvacationclub.com
Phone: (941) 688-7700 ext. 4408
For the archives, go to: http://lists.sageit.com/forte-users
and use
the login: forte and the password: archive. To unsubscribe,
send in a new
email the word: 'Unsubscribe' to:
forte-users-requestlists.sageit.com
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.sageit.com

Disable User searching in an LOV

Hi Looking for suggestions on how to limit the user to using a selection from the default LOV search values. When the LOV is rendered it displays values and I want the user to select one of these values and not let the user enter their own search criteria. You would think there would be a property for this.
Maybe I'm using the wrong strategy, I want to enable the user to configure an id number by selecting from a list of values. The user needs to be able to see the other fields in the LOV like NAME, ADDRESS etc., to choose the correct id. I need to restrict the user to the values presented.
Thank you for any suggestions.

If you want to restrict search based on the columns in the selection drop down, then follow above advise. Otherwise if you are looking to provide just a selective list of values to user, use a choice list instead of LOV.
--Shiv

Run search on user table to find which users belong to which department

Hello,
I'd like to know if it's possible to search a user table in SAP or Oracle where users and his/her department are displayed.
The user's department is of course defined in SU01 but in stead of of entering user per user in SU01, I want to find the table where I can run a search.
Eg: I have a long list (300) of users and I just want to know in which department they are working.
SAP system release = 4.7 R3
Oracle = 9.2.0.8
Thanks a lot
Bert

Perfect ! I was trying to find it and this answered it perfectly ! Thanks

Searching a user using IUserFactory in KM.

HI all,
I am searching users on their Display name and their User Ids.
I am using the following :
filter.setDisplayName(str,ISearchAttribute.LIKE_OPERATOR,false);
result1 = userFactory.searchUsers(filter);
filterNext.setUniqueName(str,ISearchAttribute.LIKE_OPERATOR,false);
result2 = userFactory.searchUsers(filterNext);
I have a User ID "1001" and the display name of this user id is "ABC".
Now if i enter "1001" in the text box for Dispaly name,it still returns me this user.
Could someone pls tell me why it is happening like that.
If i m setting the display name with the user id and then searching, then i should not get any value.
Pls help ppl.
Kind Regards
Saurabh

Try this code.
public void GrantRole(String userLogin,String roleName) {
try
String userKey=getUserKey(userLogin);
String roleKey=getRoleKey(roleName);
RoleManager roleMgr = oimClient.getService(RoleManager.class);
Set<String> userKeys = new HashSet<String>();
userKeys.add(userKey);
RoleManagerResult result = roleMgr.grantRole(roleKey, userKeys);
System.out.println("Status:"+result.getStatus());
catch(Exception e) {
e.printStackTrace();
public String getRoleKey(String roleName)
String roleKey = null;
try
RoleManager roleMgr = oimClient.getService(RoleManager.class);
List<Role> roles = null;
SearchCriteria criteria = null;
criteria = new SearchCriteria(RoleManagerConstants.ROLE_NAME, roleName, SearchCriteria.Operator.EQUAL);
roles = roleMgr.search(criteria, null, null);
roleKey = (String)roles.get(0).getAttribute(RoleManagerConstants.ROLE_KEY);
catch(Exception e) {
e.printStackTrace();
return roleKey;
public String getUserKey(String userName) throws Exception
UserManager usrService = oimClient.getService(UserManager.class);
User user = usrService.getDetails("User Login", userName, null);
String userKey=user.getAttribute("usr_key").toString();
return userKey;
}

Increase user search result..Please guide

Hello All,
How can I increase the maximum user search result.
I did read some posts on SDN and did make change in the following paramters in the config tool:
ume.admin.search_maxhits_warninglevel
ume.admin.search_maxhits
Referred post:
increase search limit
but it still searches for only 1000 users.
Please guide.
Awaiting Reply.
Thanks and Warm Regards,
Ritu

Hello AE,
Its not working still.
I restarted the server again and now when I search for users, I get a message as the search result has exceed the limit.
And that the search result is not complete.
It again retrieved only 1000 users
It does not mention the limit count.
I have set the maxhit as 9000 and the warning limit to 10000
Am working on EP7 SP9
Please guide.
Thanks,
Ritu

Prevent multiple users from accessing a list item at the same

Hi,
I have a scenario where, if a list item is opened (in edit mode) by one user, no other user should able to access it. I mean to checkin/checkout kind of thing which is not possible with sharepoint lists.
One thing that I have done through infopath 2010, by setting a rule on form load. On form load, set a field's value Assigned To to Current User and then submit data. In case I am getting value of Assigned To getting stored in the list as a new record
along with all the values from previous fields.
I want to update the same record not the duplicate record.
Please suggest a solution for it.

Hi
add a new column to your list COL_EDITING( type yes, no )
Default value : NO
Customize your editform.aspx attached to your form, when it open
A. analyze if COL_EDITING=NO
If it isn;t alert an error message ( the item is in edit mode by another user ) , and close the page
if it is --->
B to fill COL_EDITING=YES
and next permit user to fill the fields in the form
Also
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

Sharepoint 2010: prevent users from editing a list in the datasheet view

Hi,
I have a sharepoint 2010 list that I need to prevent users to edit from the datasheet view. This is because I have edited the add item form on sharepoint designer and included some custom code. Moreover, I need to allow the users to view the list in datasheet
view to make use of the datasheet custom filter view feature which is not available in the standard view. So I need users to access the datasheet view of the list in read mode only but be able to edit the list in standard view only. Is this possible? How?
Thanks,
George

Hi.
Maybe this helps...I found some users having the problem that the list WAS read only in datasheet view...this is a list of reasons why this could happen:
Certain columns, such as Created By and Modified, are always read-only. Values for these columns are entered automatically.
The changes you made to the selected row or column have been submitted to the server. If there is no conflict or error, you will be able to edit the row or column after the changes have been saved.
There is an unresolved conflict or error in the selected row or column. Resolve the conflict or error before attempting to edit the selected row or column.
The list is set up to require content approval, and you are viewing the list in the All Items view.
In the My Submissions view of a list that requires content approval, the
Approval Status and Comment column are read-only. Only a user with Manage Lists right can edit these two columns.
Attachments are read-only in a list that requires content approval. You cannot view or edit attachments in any of the views.
The document in the current row has been checked out by a user. You cannot edit the columns in the row until the user checks the document in.
You do not have permission to edit the column or row. Contact the list author for more information.
(from the help)
You could also check:
http://support.microsoft.com/kb/2274841
Reverse engineer and you may have a solution? ;-)
Regards
hr class="sig">Thomas Balkeståhl - Technical Specialist - SharePoint

Search a user in Active Directory by his name

Hi all,
Is there a way to search a user in an Active Directory with some attributes ? For example, I would like to find all the users whose firstName is "Guillaume".
I use a Provider connected to an Active Directory to authenticate and it works fine. I have also implemented an UUP to get the profile of a user in this AD.
But for the moment, the only way I can find a user by his name is to
* get all the users from the AD (userProviderControl.getUserNames("*", SIZE_MAX))
* Then for each username :
- get his profile with PropertyControl and ProfileWrapper (each user has a ldap propertyset filled by the UUP) ==> propertyControl.getProperty(profileWrapper, PROPERTYSET_LDAP, PROPERTY_LDAP_FIRSTNAME) )
* Browse all the user profiles retrieved and find the good one.
Is there an API to do what I want ?
I'm using Oracle WebLogic Portal 10.
Thanks for your help
Guillaume
Edited by: user10185882 on 3 nov. 2008 06:07

A DistinguishedName is of the form e.g. "cn=username, ou=Users,dc=hostname,dc=com". In other words it contains attribute names and values for each name component. Evidently your DN doesn't do that.

How to display user define value in list screen from detail screen

Hello Experts
I am working on task in which i have to display the user define value on list screen. like i have one list list screen which have one button for add..once i click on add which navigate to detail screen and detail screen has two fields one for ID AND other for name and detail screen has one button for save once i put value for id and name and click on save button which will navigate to previous list screen and those values which should be display on list screen.
Regards:
Sumit

Hi Sumit,
To navigate to the Master page on button click , you need some thing like,
oSplitApp.toMaster("masterpage_id");
to understand the navigation for Master/Detail page , have a look at,
http://help.sap.com/saphelp_uiaddon10/helpdata/en/df/adb6b7247e4826b0fcde472b029840/content.htm
Also to pass value from Detail page to Master page, you can use a Global variable to store your values on click of the Save button. For eg. You may have a global JS file which both Master and Detail page can access like App.Js, Application.JS etc.
After navigating to the Master page, you can read the Global variables and show it on your Master page.

User Search result is not displaying

Hello friends,
i am facing new problem in the Portal, when i am searching any user in User Admin-> search.
its dislaying some information but its not displaying the Contact information.
can any one perovide me some help in this regard...
This error i am getting..
Unparseable date: "en_US".
Exception id: 03:44_27/03/08_0056_7377050
See the details for the exception ID in the log file
Regards.

did you check the log file under
http://host:port/nwa--monitoring-logs and traces-sap logs

SDN user SEARCH & Fav. User list

Similar Messages

Maybe you are looking for