SE Electronics Reflexion Filter for Voice Home Recordings

Hey,
My dealer, who works in a Studio as well is helping me out with my Home Recording Equipment List, as i posted it in another thread.
Since i will be doing the recordings at Home, i was thinking of making myself a Recording Cab for voice recordings. My dealer told me that would be too expensive and he recommended me:
SE Electronics Reflesion Filter http://www.seelectronics.com/rf.html
To all the Sound Engineers out there who work in a Studio and live from that, please don't tell me that it is a peace of crap and that I should go to a studio (or "your" studio) cuz only there I will get a good sound.
I'm trying to find a solution for my Home Recording, so please try to be helpful and give constructive insight of your thoughts about this piece of equipment.
Thanks
Cheers, cj.

it is ridiculously cheap to build your own vox booth... about 20 Squaaremeter of chipbord 7$ per SQM - a couple of thin pillars 4$ each a pack of rockwool and a window if u wanna have reflections:-))) The problem with a vocal booth is that it is "relatively" small - if u have a normal male voice u will be able to energize the air at 100 hz... 100 herz is omni directional meaning that that is travels with the shape of a BALL in all directions....100 hz has a wavelength of 3,45 meter at 23 degrees celcius which should cover "normal" room temp... in order for this wave not to build up u would have to make one helllll of a large vox booth or make it air transparant - If I were u I would build 4 dividing Walls (should absorb and let air thru) then u will be able to "Shape" your room the best way.... DOnt fall for the trick and buy so called absorbers for 400$ at your dealer - THEY DONT WORK ....
That thing in the link is a total Joke - maybe it will absorb 1000HZ and above - but it will reflect 500HZ and below - how is a small thing like that gonna stop 100 herz???? 100 herz has a waveslength that is 3,45 meters long - the wave is going to laugh at that so called absorber:-))) I would not buy it.. putting something like that infront of the mic is worse than having nothing - it will reflect.... ALso - what happens to all reflections coming from the back or above - I think this company should call they thang a megaphone rather than an absorber
Then you would be better off by building 4 "Acoustic Walls" which you can moove around separately thus shaping you room like u want it -
Good Luck - if you are interested I could mail u some info on how to build such a dividing wall

Similar Messages

Which compressor Type is the Best for Voice over recordings?

The compressor Plug in in sdtr pro has a vca, platinum, opto etc
Which One is the Best for male Voice overs?
I don't Know the differences opto, platinum, opto....

Opto, VCA, and FET refer to models of different analog circuitry that accomplishes compression in different ways.
Not positive, but I think "platinum" is not really a model, but the plug's own compression scheme.
When I worked at an audio post facility, we had hardware UA 1176 compressors, which are FET compressors. They sounded pretty fantastic, but that's not saying that the model in the plugin will sound that way.
Here's a nice discussion of the different types:
http://www.barryrudolph.com/mix/comp.html
Scroll down to the salmon background sidebar.
Ultimately, it's really best to try the different models out and see which sounds best on your material. Let your ears be the judge.
Good luck!

GRC AC Filter for System in GRC AC End user Home

Hi,
I need to create a filter for system (for all user) in the ALV, from END USER HOME when try to select roles and system from Model User
I see the instructions in the link:
http://scn.sap.com/community/grc/blog/2013/09/04/customizing-access-request-and-approval-screens-in-grc-access-control
But i try to open application GRAC_UIBB_END_USER_LOGIN from SE80 transacction, appears a error in the navigator.
This is what I want to accomplish

Hello Cristian,
Try to add the below string at the end of the URL for which you are getting error.
&SAP_CONFIG_MODE=X&OBJECT_ID=ACCREQ
Hope it helps.
Regards,
Neeraj Agarwal

Filter for movie trailer voice over?

Does anyone know of a filter I can use in CS6 or purchase that will enable me to alter my voice to sound more like one of those scholarly sounding voice overs used for movie trailers?
Thanks.

Maybe you don't need a " filter" for after the fact.. you may be able to make your voice sound like that as you record it....
For example, if you wanna sound like a smart person from New England states.. you can put a clothes pin on your nose as you speak.
Use words like, " one has to know one's history to know one's potential, doesn't one ? "
Alternately, if you wanna sound like someone from the SouthWest.. like Texas for example, you can talk through a sock....just roll up a common cotton sock and speak through it into mic....and use words like, " Heck, it aint rocket science to know about the history of this place ! "
add some background stuff like cattle braying and you're in like Flint !

What is best filter for MacBook Pro

What is best filter for my son's MacBook Pro to block adult/**** sites while allowing access to most anything else. The parental control I set up has not been the answer. I constantly have to unlock sites for him. I would appreciate any suggestion.

If the options on the computer itself are not sufficient, you might try other options like OpenDNS Home, but it also involves a list that might need to be customized.
In the end, the best defense is passing down a strong set of values so that when your son does visit the "wrong" site (as he inevitably will, and increasingly so into adulthood) he at least has an innate knowledge that he shouldn't be there.

Implemention QOS for Voice

Hi,
We have a 2Mbps LL 1:4
we are using CSICO ATA for Voice.
we are using cisco 2620 router .
Here are my questions.
1.Kindly check My config and say whether this QOS config will work for prioritising the Voice.
class-map match-all VOIP-RTP
match ip dscp ef
policy-map VOICE-QOS
class VOIP-RTP
priority 1024
interface Serial0/0
description ### STPI-GATEWAY-VASHI ###
bandwidth 2048
ip address 213.11.12.115 255.255.255.252
ip access-group 103 in
ip access-group 103 out
service-policy output VOICE-QOS
shutdown
2.How can i filter the HTTP,TELNET,SSH,RDP,FTP traffic.
Kindly help me.
Thanks
Ranga

A more scalable config (that you dont have to redo too much) might include bandwidth guarantees for other classes of traffic as well...
Also, I like to go with the qos design guide recommendation and set aside a queue for voice signalling... like the following...
i also dont "match ip dscp ef" but rather just look for rtp audio... dont always have a marking switch/phone system behind your router... sometimes its a whitebox phone system sending rtp packets, and a dumb switch... I also go with a nested policy, which shapes all to the speed of the link, then decides which traffic will follow the rules of the child policy to leave the single queue ;)
class-map match-any manage
match protocol dhcp
match protocol dns
match protocol kerberos
match protocol ldap
match protocol snmp
match protocol syslog
class-map match-any bulk
match protocol exchange
match protocol ftp
match protocol pop3
match protocol smtp
class-map match-any voicesignal
match protocol h323
match protocol rtcp
class-map match-any transactional
match protocol citrix
match protocol pcanywhere
match protocol secure-telnet
match protocol sqlnet
match protocol sqlserver
match protocol ssh
match protocol telnet
match protocol tsrvrdp
class-map match-any video
match protocol rtp video
match protocol cuseeme
match protocol netshow
match protocol rtsp
match protocol streamwork
match protocol vdolive
class-map match-any voicebearer
match protocol rtp audio
policy-map Pol-S0/0/0.1-child
class voicebearer
set dscp ef
priority percent 25
class transactional
bandwidth percent 25
class voicesignal
bandwidth percent 5
class manage
bandwidth percent 5
policy-map Pol-S0/0/0.1-parent
class class-default
shape average 1444000
service-policy Pol-0/0/0.1-child
int s0/0/0.1
service-policy output Pol-S0/0/0.1-parent
(yes not all my classes are used in my policy; they are for future use... nice to have them in there now though, as they can always be allocated some bandwidth later on, at the expense of what is carved out now...)
Tschuss,
Joe

Phole Line Split with filter for phone affect DSL Speed

Hi,
Without being on the phone for hours for nothing I am trying to figure out sometihng. I am currently paying for 3mb service but download speed through speed check is just above 1mb. The line that I have connected to the DSL is split with a filter on the other line for my home phone service. Would this cause a significant decrease in speed?
Thanks.

The dsl micro-filter does not lower the connection speed. You need to do more troubleshooting. Try testing your speed with the DSL modem plugged straight into your NID if you can.

My iphone 4 speakers stopped giving me sounds when i play audio or video even while gaming. It works fine when ringing tunes of for voice mails. What is wrong with it?

My iphone 4 speakers stopped giving me sounds when i play audio or video even while gaming. It works fine when ringing tunes of for voice mails, even works fine with headsets. What is wrong with it?

well i'd seriosly say point a hot hair drier at the speakers as water has entered the phone most commonly via the home button but avoid getting it too hot let it cool every 3 minutes after constant drying. Don't worry I have honestly dont this with my iPhone 4 GSM 16GB. For future reference avoid letting it get wet.

LTE for Voice & Data

So I recently upgraded to a 6+ I have been with Verizon for 4 years & have never used .5gb of data. Now in just 1 week I have used 2gb! I am on my home internet all day. I did receive this text message from VZW;
You recently enabled LTE for Voice/Data & now have Advanced Calling 1.0. Please visit www.vzw.com/AC1.0/iPhone6 to learn more about the service.
I do not understand the advanced calling, could this be affecting my data usage??

You will almost always see a bump in in data use when going from a 3G phone to LTE phone. I hear people say they do the same, but several factors come into play:
1) browsing is faster so you tend to browse more per unit time
2) Any media you do consume (audio, video) will often get sent to you in a higher quality and thus more data for the same listening or watching time
3) You will buffer ahead more due to the speed using data for things that you may never even consume if you go away from a web page or media before finishing it.
My experience seeing 5 people now go from 3G to LTE in the past couple of years is every single one had increase in data. The lowest was a 50% increase and the highest 200%.
I will also confirm that advanced calling does not use your data bucket (it does use data, it just is not subtracted from your limit). Agree with all the above too.

How do I retrieve the microphone for voice text in ios8? I upgraded to iOS 8 last night and I don't have it.

How do I retrieve the microphone icon for voice text in iOS 8? I downloaded the new iOS 8 last night and I do not have the ability to voice text. Someone please help.

I did not do anything to mine except update. You can try doing a reset on the phone. It will not affect data. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. Make sure you also have iMessage activated and data turned on. Remember that iMessage requires both users to have an active internet connection.

New Setup for a Home Network

Hi Everyone,
I just built a new house and am trying to get all my equipment working correctly. Here's what I currently have:
I have a high speed docsys cable modem for comcast.
I have an SLM 2024 24-port gigabit switch
I have a WRT610N Wirless router that I want to use as a WAP
I'm missing a router and am open to suggestions
I have structured wiring throughout the house and my house consists of the following:
Downstairs - Kitchen (1-port)
Downstairs - Study (1-port)
Downstairs - Great Room (1-port for media access to blu-ray)
Upstairs - Bedroom 1 (1-port currently unused)
Upstairs - Bedroom 2 (1-port currently unused)
Upstairs - Master Bedroom (1-port for media access to blu-ray)
Upstairs - Entertainment Room (4 - ports // 2 (Computers), 1 (Wireless-N router), (1-port used for media access to xbox-360))
4-additional ports will be used for multi-media (currently not designated)
So, I have a total of 10-14 ports throughout the house that will be used.
In the basement, all of the structured wiring leads down to a can and a 24-port patch panel. The cable modem is plugged in to a whip and will be plugged into a router (need help on which router I should use). The router will be plugged into the SLM2024 switch. The SLM2024 switch feeds the patch panel in the Can. The WRT610n is upstairs on one of the ports that is fed into the SLM2024.
I also have a multi-media server that I'm probably going to place in the basement which has 4-terabytes of space for media storage and sharing. It also acts as a simple home server.
So, my questions are how am I connecting and setting things up so that I'm efficient with my usage? I already have one vlan (vlan 1) but haven't created any others. Can anyone assist me with what router I should get and how I should connect my network up efficiently?
Any help would be appreciated.
Thanks.

I've attached 5 pictures.
Board View:
This is the overall 8x4 board where I've placed the can and the SLM switch. The little box in front is a small acer media server (4 terabytes) which I use for storing media, pictures, etc.
Switch:
This is the SLM 2024 - 24 port Gigabit Switch. It's very quiet and works well with everything.
Can:
A basic can that I setup which has the patch panel at the top of the can, my modem and router in the bottom along with a small surge strip. I may change out the surge strip later on, but for now - this works fine.
Modem - Router:
The bottom box is the Docsys 3 modem from motorola. You need docsys 3 to really take advantage of the high speed download packages a cable provider gives you. I purchased my own to cut down on the monthly lease charge and made it simpler.
The top box is the 8-port gigabit router which I use for managing DHCP routing, NAT, and the firewall.
The modem connects to the router and the router feeds down through the bottom of the can and into the switch.
Patch Panel:
The patch panel basically is divided into three color schemes that I created. The blue cables are for voice; the green cables are for data; and the black cables are for cable.
The original patch cables that I had purchased with the can were not very good. They were rated fine but they were too thin. So, I used thicker coaxial cable so that no degradation occurs. Because of the thickness, I ended up having to bow tie the cables in a medium loop. Again, it works very well.
Summary:
I hope the pictures help.
The only thing I didn't post (due to the 5-pic limit) was a picture of my WRT-610N Wireless router. It sits upstairs in the entertainment room and is plugged into a direct wall data jack. The broadcast range is huge. I currently have zero issues with any ports or wireless access in the house.
I also just finished working out the video pieces as well for the multimedia in the house. It all ties into everything as well. I used velcro straps for cable ties on my lines and black ties for the cabling that belongs to the static video equipment (which is not posted). For the video equipment and sound equipment I actually have a universal remote that's tied into a command center and receiver which allows me to turn on any device in the house (TVs, Cable, Ipod, XM Satellite, Xbox 360, etc. I can go to watch or listen mode and decide which room I want to use, which device to turn on and then the universal remote becomes the master. I tied my computers into the command center so I can use any computer in any location and view it on the 63-inch plasma TV in the great room and utilize it with a bluetooth setup.
There's still a lot more work to be done but it's getting there.

ATT 8820 Wi-Fi for voice

Does anyone know if the 8820 can work for voice as well as data on a wi-fi connection? My boss has a country home in upstate NY with no cellphone signal, but has wi-fi in his house. I would like to get this device if the voice would also be able to work over the wi-fi, not just data.

As of now only T-Mobile allows the Voice over Wi-Fi option with their BlackBerry devices.

IPhone 5s with hearing aids via Bluetooth. Need to use the phone for voice, what's the best distance that the mic will pick up your voice

I wear hearing aids that are made for Apple, the audio will go into the hearing aids via Bluetooth. I'll need to use my phone for voice only.. I drive for work and have a wok oh one too and both are synced to a bluetooh headset (LG). I'm trying to figure out how to talk on both phones ( use speakerphone on work phone?) without using a bluretooh headset. I don't know the range of the microphone on the IPHON, thinking about hanging it around my neck or put the phone into a stand/holder on the dash and use the speakerphone feature. Looking for ideas to make this simple

You can't do anything with that problem.
Take your iPhone to the closest Apple Store and they will give you new one for 200€/$ or if you bought your iPhone in less than 12 months you will get it for free.

I can't figure out how to resize my picture for my home or lock screens.

I can't figure out how to resize my picture for my home or lock screens. It shouldn't be his difficult. Any suggestions? I'm running the latest software. Thanks.

whichever app store you are connecting to, hyou need a credit card with an address in that country. Also, itunes gift cards must be in local currency too.
If you are in japan, you need to use the japan app store

How can I make a folder in the TV for my home movies

How can I make a folder in the TV shows for my home movies collection? I have created a folder in the library in finder and put all the videos in there but they do not appear in itunes.
pshultz

It's best to never move iTunes media around in Finder. Add it to the Library through the iTunes interface by dragging them into the window. Once they've been added to the library, you can try using Get Info on the files in iTunes and change the tag info to make them group together. (A unique album name should do this.) If you want them to be included with TV Shows, you can try using Get Info to set the Kind to TV Show (found under the Options tab in Get Info), but I'm not sure if it will work. Otherwise, you could make a playlist and drag them into to access them all in one convenient spot.
If you add the items as noted above and they still do not appear in your library, it's probably because they are not a compatible format.
Message was edited by: Diane Wordsmith

SE Electronics Reflexion Filter for Voice Home Recordings

Similar Messages

Maybe you are looking for