SE USB 1000a No Sound :(

I use Logic Express 8 . . .
And when i upload and plug in my sE USB 1000a
The computer reads it and everything is set up fine.
Its just there is no sound coming out anywhere.
Any suggestions?

This is a very common question. You need an 'aggregate device' to be able to combine your mic input and your audio output into one virtual device which you can select in your Logic preferences.
Details are here:
http://discussions.apple.com/thread.jspa?messageID=8812209&#8812209

Similar Messages

Unable to get upmixing to work with USB 5.1 sound card

Hello!
I'm having some trouble with an USB 7.1 sound-card that I want to use for my 5.1 sound system.
The sound-card is connected to my Lenovo Thinkpad T400 via docking staton on USB.
$ lsusb
Bus 008 Device 002: ID 0bdb:1900 Ericsson Business Mobile Networks BV F3507g Mobile Broadband Module
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 005: ID 0d8c:0102 C-Media Electronics, Inc. CM106 Like Sound Device
Bus 007 Device 004: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse (M-BT58)
Bus 007 Device 003: ID 04b3:4485 IBM Corp. Serial Converter
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
$ lsmod | grep snd
snd_hda_codec_conexant 35994 1
snd_usb_audio 116956 1
snd_usbmidi_lib 19723 1 snd_usb_audio
snd_rawmidi 18710 1 snd_usbmidi_lib
snd_seq_device 5180 1 snd_rawmidi
snd_hda_intel 36520 0
snd_hda_codec 148129 2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 6332 2 snd_usb_audio,snd_hda_codec
snd_pcm 77765 3 snd_usb_audio,snd_hda_codec,snd_hda_intel
snd_page_alloc 7234 2 snd_pcm,snd_hda_intel
snd_timer 18718 1 snd_pcm
snd 59141 13 snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_conexant,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,thinkpad_acpi,snd_seq_device
soundcore 5450 1 snd
usbcore 178119 11 btusb,uhci_hcd,snd_usb_audio,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,usbnet,cdc_acm,cdc_wdm,cdc_ether
So I put this into /etc/modprobe.d/alsa-base.conf:
options snd_slots=snd_usb_audio,snd_hda_intel
options snd_usb_audio index=0
options snd_hda_intel index=1
to always get a correct sound device order.
When I then - after reboot - play music, It works only on the two front-speakers. All other speakers - rear and center - are dead.
But when I invoke speaker-test with
$ speaker-test -c6 -D surround51
speaker-test 1.0.27.2
Playback device is surround51
Stream parameters are 48000Hz, S16_LE, 6 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 96 to 87381
Period size range from 48 to 43690
Using max buffer size 87380
Periods = 4
was set period_size = 21845
was set buffer_size = 87380
0 - Front Left
4 - Center
1 - Front Right
3 - Rear Right
2 - Rear Left
5 - LFE
Time per period = 14.569581
all speakers make a noise when they are shown during the test correctly.
In the wiki, I tried some examples on the configuration of ~/.asoundrc as described, but none of them worked - everything I specify there is effectles, even after reboot.
What I've tried so far in ~/.asoundrc (without success):
pcm.dsp {
type plug
slave.pcm "dmix"
pcm.upmix51 {
type upmix
slave.pcm "surround51"
delay 15
channels 6
pcm.!default "plug:upmix51"
pcm.upmix71 {
type upmix
slave.pcm "surround71"
delay 15
channels 8
pcm.!default "plug:upmix71"
pcm.dmix6 {
type asym
playback.pcm {
type dmix
ipc_key 567829
slave {
pcm "hw:0,0"
channels 6
pcm.!default "plug:dmix6"
So what am I doing wrong?

Hello there!
In the german forum, I found some more help.
This configuration now got 5.1 sound mixing to work via ALSA (without using PulseAudio).
$ cat /etc/modprobe.d/alsa-base.conf
options snd_hda_intel index=-2
options snd_usb_audio index=-1
$ cat /etc/asound.conf
pcm.!default
type plug
slave.pcm "surround51"
slave.channels 6
route_policy duplicate
$ cat /proc/asound/cards
0 [Device ]: USB-Audio - USB Sound Device
USB Sound Device at usb-0000:00:1a.7-5.4, full speed
1 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfc620000 irq 47
4 [ThinkPadEC ]: ThinkPad EC - ThinkPad Console Audio Control
ThinkPad Console Audio Control at EC reg 0x30, fw 7VHT12WW-1.01
But this doesn't solve all my problems.
I'm still searching for a way of how to use the internal intel sound card as default PCM device if the USB sound is unplugged or not available during boot.
Any ideas?

Since windows 8.1 usb ports and sound are acting strange

Hello,
Since I upgraded to windows 8.1 my sound randomly stutters(very anoying) and my usb ports get turned off, only the ports that have been occupied since boot, new things work, and not reinsterting the things that were present at boot, in the same or a different
port doesn't work.
Hell, why do we pay for an OS that doesn't even work?
I expect that something as simple as an USB port or sound would work just fine.
I have installed all the latest drivers but somehow windows seems to screw things up.
When I boot up debian, I have no problems at ALL. And did I pay a dime for Debian? No, it is free.
I am getting really depressed here, paying for stuff that doesn't work.
So does anyone know any other way to fix this OS than by breaking the disc and never return to it?
Thanks in advance.

To whom are you telling that, this is an end user forum.
If you have problems than contact Microsoft in your country.
http://www.microsoft.com/worldwide/
Success
Cor

Audio stops playing - USB Codec output - "sound" in System preferences

We play music at our church from iTunes on our MB pro to an Allen & Heath 420 mixer via USB. This is switched to USB output in sound in System preferences. We have been doing this flawlessly for about 1.5 years.
Recently, in the middle of the music it stops. There is no more signal to the mixer but if I switch the preferences to internal speakers there is sound continuing. The only fix is to reboot which is very problematic in the middle of a music set.
This happens also when playing through the USB from Garageband as well.
It seems like a system wide codec issue but I don't know what the fix is for it.
Any suggestions? I cannot simply switch to using the miniplug because we record through that.

Find another Mac and check that the A&H works, report back.
You should also consider a decent external interface, recording off the minijack is the worst choice.

HT2508 My amp has an USB input but when I attach my mac pro to it, and set the input to the USB setting, no sound comes out. I looked at the system settings, but none of them produce a different outcome. How can I send the music through the USB out to USB

My amp has an USB input but when I attach my mac pro to it, and set the input to the USB setting, no sound comes out. I looked at the system settings, but none of them produce a different outcome. How can I send the music through the USB out to USB in?

AFAIK cameras offer their own built-in format utility for inserted SD cards. You should use that. Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly. Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan. I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole.

Does the iMac support a USB-5.1 sound card?

I have a new Intel iMac connected though USB to a "Sound Blaster Live 24 bit" sound card connected via mini-jacks to a logitech 5400, but I am not getting 5.1.
In the Audio MIDI pref pane, I can only select "multichannel," not "5.1".
Is there any way to fix this? If not, I need an optical to mini jack... any idea if there is such a thing?
Matthew

Hi Matthew,
I don't know about the SBlive 24bit device.
However, the Intel iMac's all have built in 5.1 optical output from the normal headphone jack (it is optical and electrical). There exist TOSLink to 3.5mm optical cables, and some can even be converted to either.
There are also some optical to coax SPDIF converters available if your speakers only take SPDIF coax and not SPDIF optical.

Usage of DAQ USB-6211 with Sound and Vibration Measurement Suite

Hi,
Could I use DAQ USB-6211 with Sound and Vibration Measurement Suite ? All examples are based on 24-bit devices (usually with IEPE-on) such as NI 9234 or similar.
I don't need IEPE, 16 bit is sufficient for my dynamic range, could leave without simultaneous sampling - so 6211 (that I have) is OK for me.
Actually I'm interested in S&V Toolkit ( or Measurement Suite) as a tool with some specific Signal processing capabilities (for example, short-time FFT etc.)
Thanks in advance

Hi sgabr,
Yes, you can use the 6211 with some of the Sound and Vibration VIs, including most of the FFT functions. I know that's a little vague -- I don't have a list of which functions do or do not support 16-bit devices, but I did test it out on my system this afternoon. If there are specific functions or examples you'd like to know about, let me know, and I will try them out.
You also have the option to download the evaluation version of the Sound and Vibration Measurement Suite. That way, you can test drive it yourself!
Kyle B | Product Support Engineer | ni.com/support

USB Live! Sound Blaster 24bit with poppi

Hi. A month or two ago I purchased my usb connected Li've! Sound Blaster 24bit from CompUSA. It has worked fine with my logitech 5. speakers. Yesterday, I bought a 60gig Maxtor harddri've from compusa, also USB. Since I installed that, my sound has been having loud pop sounds once in a while, especially when data is being transfered to the harddri've. I have a 400watt powersuply, amd athlon single core processor, gig ram, onboard harddri've, a geforce nvida 7800gt graphics card. The video card has a printed requirement of 350watts. The harddri've has its own powercord, and the usb that connects it to my PC, and so do the logitech speakers I have both the sound blaster and the harddri've plugged into the rear of my PC.
The poping sound happens about twice, then the sound blaster box makes a click sound and turns off. When I unplug, then plug it back in or press the mute button on it, it comes back on, but I have to restart whatever application that was playing the sound because it no longer works. For instance, if I'm listening to music on iTunes, and the card turns off, I have to close iTunes and reopen it or no sound will come from that application, same goes for media players, web based sound i.e. youtube. When the card turns off, the green and blue light on the front turn off, while I can still see a red glow from the 'optical output' slot.
The only change I made with my PC is plugging in the harddri've. The popping/shutting off of the card happens both when I play sound thats stored on the external dri've, and stuff like my iTunes which is on my internal. The model number of my card is 580490 and the box had a sticker that said '5. home theater audio for your PC' plus another sticker that said '64 bit, Windows XP Pro x64'. I downloaded the drivers for this, but when I tried to apply them, it said they didn't need to be updated. I don't know how to uninstall them.
Thanks, asukar

AmusedToDeath,
It's not referring to the cable. That information is referring to your computer USB controller. If your computer USB controller is only USB . then you will face the limitation.
Jason

Not recording from USB keyboard using sound module

I have a USB keyboard and Poizone sound module but nothing gets recorded into AA3 when I record to a track. Track is armed to record, soundcard is selected (analog in) but nothing. What am I overlooking? Thanks.

To record the output of another application in Audition, you'll need to configure your default Windows recording port to be "What You Hear" or something similar, if that is an available option. Right click the speaker icon in your Windows system tray, and choose to adjust the Recording Properties. Here, depending on your OS, you are given a list of different input ports on your audio device: Microphone, Line Input, CD, and often, What You Hear. This just routes the output port back as an input so other programs can record this stream.
Not all audio devices offer this, so it may not show up. In that case, you'd probably need to route your output to a mixer, send a feed back to the Line Input port on your audio device, and listen via headphones through the mixer. Note that you'll need to disable software-based monitoring to prevent feedback and that you'll definitely want to turn off system sounds in case someone sends you an e-mail or an IM while you're recording.

USB mic - No Sound

Hello,
I am using a MXL 006 USB microphone with Logic 8, but cannot get any sound at all. I have followed all the steps in the instruction booklet, the red light is on, I have connected via the USB port on the Macbook Pro, not via a hub, but still no sound.
Any suggestions on what the problem maybe?
Mc

And have you set the mic as the audio driver in Logic?
Really, these USB mics are a really crappy invention in my opion (not that you asked for it, of course!
Fine for doing something cheap and cheerful in Garageband, but moving onto Logic Pro, you really should get something a bit less computer-novice like...

Fatality HS-1000 USB Headset (No Sound but is detected by PC)

I don't belei've I've ever been so frustrated with a company and their products. This is my second headset that I've bought and both within 2 months of purchase are dead.
I'm running Windows XP 32 bit. The headset is being found by the USB port and the Creative Volume Panel sees that the headset is there. The controller on the head set works yet I get no sound what so ever.
I've updated firmware, I've installed drivers, uninstalled and reinstalled and still have no sound. Same thing happend on my other headset on the same PC.
edit: Upon uninstalling the mouse that I had previously installed the headset now has sound. When I reinstall the mouse the headset fizzles and looses all sound.

Hello M_Squared,
The settings on the entertainment mode should also be applicable for gaming. Most of the sound settings should be available on the game itself. The rest of your questions can be answered by this link. Under Documents, you can find the alchemy quick start (how to guide) and alchemy FAQ's. Under Lists, you should find the tested games that works with the alchemy software.
Hope this helps.

Arch and Tascam US-122L USB 2.0 Sound Card

Hello,
I recently tried using my Tascam US-122L sound card, but I am not aware if there is support on linux for it or not. I tried the AUR, but it gave me information about a different Tascam card. I found this website which is interesting but must be outdated:
http://www.pps.jussieu.fr/~smimram/tascam/
I did a simple lsusb and the card seems to be recognised correctly by the system:
Bus 002 Device 007: ID 0644:800e TEAC Corp. TASCAM US-122L
but alsamixer gives me the message:
"This sound device does not have any controls."
and the device is not chosen (sound is coming out of the original speakers instead of the US-122L Phones output).
Maybe I am just failing to switch to the card? Any help would be appreciated.
Thanks in advance,
silentz0r

This soundcard is supposed to work ootb, there's a kernel module just for this card.
% modinfo snd-usb-us122l
filename: /lib/modules/2.6.39-ck/kernel/sound/usb/usx2y/snd-usb-us122l.ko.gz
license: GPL
description: TASCAM US-122L Version 0.5
author: Karsten Wiese <[email protected]>
alias: usb:v0644p8020d*dc*dsc*dp*ic*isc*ip*
alias: usb:v0644p8021d*dc*dsc*dp*ic*isc*ip*
alias: usb:v0644p800Fd*dc*dsc*dp*ic*isc*ip*
alias: usb:v0644p800Ed*dc*dsc*dp*ic*isc*ip*
depends: snd-usbmidi-lib,snd,usbcore,snd-hwdep
vermagic: 2.6.39-ck SMP preempt mod_unload PENTIUMM
parm: index:Index value for US-122L. (array of int)
parm: id:ID string for US-122L. (array of charp)
parm: enable:Enable US-122L. (array of bool)
The controls (e.g. volume etc.) are hardware controls, so there's nothing to be done for the software. That's why alsamixer shows this message. In order to get any sound, you have to either configure this soundcard to be the default one(*), or you have to tell the player to use this soundcard(**).
(*) There is a gui which can do this for you quite easily, it's called asoundconf, you can find it in the AUR.
(**) You can do this e.g. with mplayer like this
mplayer file.end -ao alsa:device=plughw=2.0
Last edited by Army (2011-08-21 01:27:12)

DYNEX USB Headset no sound

Hello everyone,
I plugged in my DYNEX USB headset for the first time using ARCH linux, and I have no sound.
Things I did to try and make it work:
-It was recognized in alsamixer's sound card selection. I selected the card.
-I unmuted the master sound in alsa by using the command: amixer sset Master unmute.
-I used pavucontrol to select the headset
Anyone have any ideas why i am not getting any sound?

Better bouble check if it is unmuted and volume not 0 - not just "alsa master" like you did with amixer; it's probably best if you select the card in alsamixer (F6 or something) and check the channels. You can save those settings with "alsactl store".
Do you have sound if you select the headset for an application stream manually?
( p.E. start video in mplayer, look for it in pavucontrol under playback / applications, set its sink to the headset )
If that works the easiest way to get it working permanently might be:
- activate module-combine at the the TOP of /etc/pulse/default.pa MANUALLY (it tends to map channels wrong if you have more than 2; also that should ensure that the combine sink is always at the top, which can avoid some trouble).
e.g.
load-module module-combine channels=6 channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe
( surround example; customize for your channels )
- delete the default / per application settings in ~/.pulse/* (in my experience those get rather useless in any case after a new sound device is added)
- make sure your combined sink is at the top with "pacmd list-sinks"
example:
$ pacmd list-sinks | head
4 sink(s) available.
* index: 0
name: <combined>
driver: <module-combine-sink.c>
flags: DECIBEL_VOLUME LATENCY
state: RUNNING
suspend cause:
priority: 1000
volume: front-left: 45864 / 70% / -9,30 dB, front-right: 45864 / 70% / -9,30 dB, rear-left: 45864 / 70% / -9,30 dB, rear-right: 45864 / 70% / -9,30 dB, front-center: 45864 / 70% / -9,30 dB, lfe: 45864 / 70% / -9,30 dB
- make it the default sink:
pacmd set-default-sink "combined"
You might have to "killall pulseaudio" before / in between steps to make sure it reloads settings / doesn't change them back etc.
Good luck!

USB ports and sound have stopped working

As the subject reads, all 3 of my USB ports have stopped working and all sound. In the device manager I receive a (code 10) for realtek high definition audio. I have done everything I can think of at this point, I have even done a complete OS reinstall. Afterwards I have also updated with every possible driver file I can find from realtek and toshiba, I really don't know what else to do at this point, any thoughts? advice? anybody else with this problem?
Windows 7
Toshiba Satellite
L505D-S5983

Same here. I have an L505D that is doing the same exact thing. No sound device, all USB ports not working and the SD card reader not working either. Also when you close the lid and reopen it, the machine won't wake up. Have to restart to get it to come back. Haven't found ANYTHING in forums to help.
Sound devices, USB ports and SD card doesn't show up in the Device Manager.
Took the laptop to a local fixer-upper. Unhooked the charger, took battery out, put battery back in, then restarted the laptop without being hooked up to the charger and everything came back on. But only for a short while. After a couple of days, it does its thing all over again.
Are we looking at a mother board issue here? SURELY someone out there in cyber space has a solution.

USB (Mega stick), sound output and PS2 problems

==USB problem==
The MSI MEGA STICK do not work with the MSI K7N2 Delta ILSR.
When you plug it, its recognized, you can write on the MEGA STICK, delete files but cannot READ from MEGA STICK. It freezes while display "reading". I have tried on lots of PCs. Only my MSI motherboard do not work properly. The same problem with my 2 MEGA STICK. And i had tried Windows XP and Linux. Same problem. Others USB devices works fine. Even card readers...
==PS2==
My optical wireless mouse do not works properly. When i turns on the computer, it works ok. If i restart, do not work. Restart again, works. And go on... Only this mouse. Others MB works fine.
==Sound Output==
And also with my sound output. The eletrical one (coaxial).
It do not work with my 5.1 home system. It works fine with my old SB Live. It gets worse when i use my tv output from my Radeon 9100. It only works SOMETIMES when the tv output is not plugged in.
Thanks to all that could help me.

Mega stick.
have you updated the firmware ?
No. It Freezes before being able to update. Also the update do not tell about solving this problem
"Firmware version: 2.05
Update items
1. Improve delete MP3 and voice files function.
2. Fix device will restart while forward/backward Voice file."
you do know that windows xp does not come with usb2 drivers.
sp1 does and you have to install them yourself.
go to device manager and delete all usb entries and reboot and windows will install the usb2 drivers next time you boot.
if you get a slipstreamed version of xp you dont need to do this as it installed usb2 drivers rightaway.
slipstream means a xp disc with sp1 on it.
My XP cd is already SP1. Also tried on BIOS to use only USB 1.1V
PS2.
tried to use the other ps2 contact ?
No. Could i use the keyboard PS2 to plug the mouse?
SOUND.
this is not my area but it could be a good idea to post what the equipment is.
have you tried the latest drivers from http://www.nvidia.com ?[/quote]
Its a brazilian brend. You wont know. CCE. Its works fine with DVDs, my old SB Live! and others. Only with my K7N2 do not work properly. Its an AC3 decoder. The problem gets worse when i use the Radeon 9100 tv out.
Look like the problem on this thread.
https://forum-en.msi.com/index.php?threadid=29572&sid=&hilightuser=26427
This is my old thread. Never solved. :-(
https://forum-en.msi.com/index.php?sid=&postid=319195#post319195
When i updated the BIOS, it got even worse. Not even with the tv output unplugged it never worked anymore...
Its very disapointed to buy an expensive MB and realized that it do not work properly...
Thanks yo your help.

SE USB 1000a No Sound :(

Similar Messages

Maybe you are looking for