Se37,se38 unable to open,,,,,

Hi all,
I have created a function module with RS_FUNCTION MODULE_INSERT.
While executing the function module its throwing the following error.
Syntax error in the program SAPLSUNI
Field "NOVBLOCAL" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement.
After that I am not able to open the function module using SE37 and SE38 transaction.
Can any one help me!!!
Thanks in Advance
Message was edited by:
        dasr r
Message was edited by:
        dasr r
Message was edited by:
        dasr r

Hi,
If u r executing the FM - RS_FUNCTION MODULE_INSERT.(Insert a function module in the R/3 development environment) . It treis to nsert a FM but if there are any syntax errors then the FM will not inserted or created in the specified Function Group.
So , u can declare Field "NOVBLOCAL" and try to execute again.
Hope this helps.

Similar Messages

Unable to create New objects in SE37 & SE38

Hi Experts,
I am ABAPer and facing belowing mentioned problem.
I am unable to create any custom objects like executable programs/BAPI/FM due to performance.
I am able to open required transactions like SE37/SE38, after that If I try to create or test object, the system is not responding, again we need to go to task bar to close the session.
I tried to debug SE38 to know what happening internally, it is closing automatically.
I tied the below mentioned steps .
1). I am able to Creating/ Deleting Tables in SE11.
      Unable to create executable program.
       Open SE38 àEnter z----- object name à Click on Create à in new window Provide Description àSelect program type u201CExecutableu201D à in new dialogue select package &
       click to save the object. (Here is the problem , we need to restart session, unable to save object properly)
2). Function module and BAPI I am trying to test in SE37.
       However I am able to open se37 transaction with in few seconds,
      After entering FM/BAPI name in SE37, if we click on Display or try to execute that FM/BAPI system is not responding.
       Open SE37 à Enter existed object name example RFC_READ_TABLE à click on Display   (System will not respond, no content will be displayed)
As per my knowledge, when ever interacting with SAP Database system is going to struct,
However a basis Consultant can understand better then me.
Please suggest and let me know what need to be done further.
Thanks & Regards,
SAI

Hi,
I had that also, the window war frozen.
The problem was the editor mode.
=> go to poperties.
=> change to mode to "old editor". don't use the first option (Now, I don't know the description). "Editor (new)"
(a bug of the frontend or the backend)
Sven

Unable to open any programs in ABAP editor

Hi folks i'm unable to open any programs in ABAP Editor.
When ever i try to open any program it goes to short dump.
Even when i try to open STO4 to view error log.
it shows following message
Short text
    Runtime error, short dump could not be written.
What happened?
    Error in the ABAP Application Program
    The current ABAP program " " had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    Unfortunately, the system cannot carry out a detailed analysis of the
    error, as the table SNAP (which gathers information at the time of
    termination) does not contain a suitable short dump.
Information About Termination Point in XSLT Prog.
    Termination occurred in the XSLT program " ".
    The call took place using CALL TRANSFORMATION from the ABAP
    program specified below.
    In the source code, the termination point is in line " "
    of the (Include) program " ".
Internal notes
    The termination was triggered in function " "
    of the SAP kernel, in line " " of the module " ".
    The internal operation just processed is " ".
    Internal mode was started at " ".

hi,
check whether any exit has been implemented for se38 and because of some statements in that it may goto dump.
also try to open ur program from SE80.if u have access to se80 then u can do it from there itself.
reward points if hlpful.

Can not see ABAP code of programs and FM using SE37, SE38, SE80

Hi, all!
When I try to open ABAP-code using transactions SE37, SE38, SE80, they don't display it. Instead it current mode hangs, but I can open another one.
System ECC 6.0, SAP_ABA package SAPKA70021, GUI Patch 17.
I have 2 laptops, one of them works with these transaction properly, another gives described problem. Other my colleagues don't have such problems.
Can anybody help me to solve this problem?
BR,
Boris

hi friend,
I had the same problem the problem than you, the problem isn´t the gui, the probelm is the msxml parser .
Follow the next sollution and you will solve your problem.
http://scn.sap.com/thread/1853701
My original problem was the "SAP signature theme" was black and with a lot of problems, changing to "Enjoy theme" everything appear works perfecly, but when I tryed to display any source code the screen was thinking without end.
The problem is solved uninstalling any SAP software from your machine also msxml program from SAP and reinstalling first msxml 4.0 and msxml 6.0 after shut down install sap logon behind, when ended everything will work again.
This my actual version and it works.
kind regards,
Miguel Angel Orihuela

I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that the program is "locked or in use by another user". I need this fixed immediately.

I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that it "Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file." Then I select "OK" and the next message comes up "Could not initialize Photoshop because the file is locked, you do not have the necessary permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock this file. I installed all of the programs on the same day from a CD. I need this fixed immediately.
I am not interested in switching to Creative Cloud, so don't even suggest it. I spoke to Mashmi (or something to that effect) on the "Support" Chat and there was absolutely no support. Useless actually.
Thanks in advance.

Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium

I am unable to open raw files from my Canon T1i in Adobe Camera Raw of my version CS3 of Photoshop. I have tried to update my ACR by downloading version 4.6 from the Adobe website but I am still unable to open raw files, just JPEG. Is there a way to use

I am unable to open raw files taken on my Canon Rebel T1i in my version of Photoshop CS3. When I import raw files into Bridge they come up as patches with CR2 on them and when clicked on, a notice comes up stating that Photoshop does not recognize these files. I tried to update my Adobe Camera Raw by downloading version 4.6 from the Adobe Website, but when I clicked on the plus-in, I got another message that Photoshop does not recognize this file. I spoke with a representative from Canon who said that I could not update CS3 and that I should subscribe to the Cloud. I would prefer to use my CS3, if possible. Can anyone advise me what to do?

The T1i was first supported by Camera Raw 5.4 which is only compatible with CS4 and later
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all T1i Raw files to DNGs then edit the DNGs in CS3
Camera raw, DNG | Adobe Photoshop CC

TS2570 Still cant access my computer, followed instructions to perform a safe boot and last line of script it shows: BootCacheControl: Unable to open /Var/db/BootCache.playlist:2 No such file or directory. Any idea?

Brand new Mac Book Pro
Purchased in Mexico's Department store Liverpool on June 20th 2012
Purchased Memory upgade to 8Gb, on june 27th, at Apple Store Memorial City, Houston
Upgraded memory from 4Gb to 8Gb on June 28th.
Tried to write on my external HD (previously written on a windows based PC) with no success.
Upon reccomendation from a Mac assistant, copied all my external HD contents into my Mac Hard drive.
Then formatted my external HD and copied back all my information to it.
deleted all the information from my MacBook Pro HD.
Attempted to repeat the same operation with another external HD, but got a message saying there was not enough epace on the computer HD (even though I have a 750Gb Hard Drive.
Looked in the trash bin and there it was, all the information previously deleted..
Could not empty the trash bin, although I got a message asking me to safely delete all the information from the trash bin,
Could not get enough space released, after several attpempts the trash bin was finally emptied.
All happy getting acquainted with my new MacBook Pro. Two days later, got a gray screen and not able to start the computer.
Looking in to Mac support I found article http://support.apple.com/kb/TS2570 and followed instructions to perform a safe boot:
"Perform a Safe Boot
Simply performing the Safe Boot may resolve this issue.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to
see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
The following is the script that appears on the screen upon safe boot. and halt after the last line.
AppleACPICPU:Processor Id=6 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=7 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=8 LocalAplicId=255 Disabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine Policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All Rights Reserved.
MAC Framework Succesfully initializad
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x20 Vextors 64:87
ACPI: System State [SO S3 S4 S5] (S3)
PFM64 (36cpu) 0xf10000000, 0xf0000000
Aplconsole relocated to 0xf1000000
PCI configuration changed (bridge=16 device=4 cardbus=0)
[ PCI configuration end, bridges 12 devices 16 ]
Firewire (OHCI) Lucent ID 5901 built-in now active, GUID 3c0754fffe9b2aa2; max speed s800.
Pthread support ABORTS when sync kernel primitives misused
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDateless load succeeded
AppleIntelCPUPowerManagementClient: ready
BTCOEXIST off
wl0: Broadcom BCM4331 802.11 Wireless controller
5.100.98.75
AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitializad
rooting via boot-uuid from /chosen: 6E918706-FC0D-37460-A3A0-6268A51DF93B
Waiting on <dict ID="0"><key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleAPIPCI/SATA@1F,2/AppleIntelPchSe riesAHCI/PRT0@0/AOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlock
storageevice /IoBlockStorageDriver/TOSHIBA MK7559GSXF Media/IOGUIDPartit
BSD root: disk0s2, major 14, minor 2
Kernel is LP64
com.apple.launchd 1   com.apple.launchd 1   *** launchd[1] has started up. ***
com.apple.launchd 1   com.apple.launchd 1   *** Verbose boot, will log to /dev/console. ***
Running fsck on the boot volume...
** /dev/rdisk0s2 (NO WRITE)
** Root file system
   Executing FSCK_HFS (version diskdev_cmds-540.1~25).
BootCacheControl: UNable to open /Var/db/BootCache.playlist:2 No such file or directory
launchctl:Dubious permissions on file (skipping): /Library/LaunchDaemons
launchctl:Dubious permissions on file (skipping): /System/Library/LaunchDaemons
Any help or suggestions on what to do next would be welcomed.
I am in the middle of the Atlantick, stuck with a brand new, non working Apple MacBook Pro.
Best regards
Sergio Ramos

Reinstalling MacOS does NOT fix the problem for me. I'm still searching a solution !
Bernard

I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002. I don't know if related. A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar b

I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002. I don't know if related. A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar back?

Hi Magsrobby,
Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

I am unable to open Icloud on my PC with Windows 7 but have it installed

I am unable to open Icloud on my PC with Windows 7 but have it on my Iphone & Ipad working OK
Please help

The menu selection only shows the other options if you already have a selection active; a selection made with one of the available tools like lasso or quick selection. First select with the tools, then use the menu 'Select'.

I upgraded my iPhone 5 to iOS7 and I am unable to open iTunes on my phone - the screen just never loads.

I installed iOS7 on my iPhone5 and now I am unable to open iTunes - the screen just stays blank.
I have checked date and time and wifi settings.
Not sure what else to do.
I do have iMatch active on my device and its working fine on my other iPohne with iOS7 installed.
Any help please!

Have you tried logging out of your account on your phone by tapping on your id in Settings > iTunes & App Store and then logging back in ? If it's still the same after that then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

Unable to open Apple application

Last week, I did the most current software updates. Ever since then, I have been unable to open certain Apple programs such as iChat, Skype, Preview, Pages, Photo Booth, etc. I have tried to download AIM, but the computer says it isn't supported. Also, now when I try to open Photo Booth, it says my graphics card doesn't support it, but I have never changed the card from the one the computer came with. The programs will open up, and then immediately quit, and I am left with "The application _____ quit unexpectedly" message. No matter how many times I relaunch and reset, ignore, or report, I can't get them to open. I'm in college and really have no way to get to a Genius Bar for a few more weeks, and I don't have the Leopard disk with me. Is there any way I can fix this on my own? Thanks!

I think it was the repair disk permission that actually worked for me. I tried it once and got no result, and then tried to download the updater. For whatever reason, I couldn't even download that. So I went back and did the disk permission repair again. It still didn't seem to work, so I just turned the computer off out of frustration. When I turned it back on, it was all fixed. So I'm not entirely sure what it was that fixed it...all I know is it works now!

Error unable to open script file

I have been using DW8 since it came out. I am running Windows 7. Everything was working fine until I had hard drive failure. Replaced hard drive reinstalled Windows and DW8. Now when I try to insert an image I get the message "unable to open java script file c:\program files\Macromedia\Dreamweaver 8\configuration\objects\common\AccessibleImage.js (error 2)".
I have done the usual--rename config file--reinstall DW8--clean register and reinstall--run as admin.--run in compatibility with XP SP2, etc. but nothing works.
Help would be invaluable to me.

Your version isn't listed here but something on this page may help you...
http://helpx.adobe.com/dreamweaver/kb/troubleshoot-javascript-errors-dreamweaver-cs4.html

ERROR: Unable to open TUXCONFIG file

Hi,
I installed and installed the following software successfully on Windows XP
Oracle WebLogic Server 11gR1 (10.3.1) Microsoft Windows
PeopleSoft Enterprise PeopleTools 8.50
PeopleSoft Enterprise Human Resources Management System 9.1 - Revision 2
Tuxedo 10gR3 for MS Windows Server 2003 w/MS VS 2005 (32-bit x86, AMD64/EM64T x64) 32-bit
i am at the point of installing the Application Server. Domain created sucessfully but i got boot errors as shown below.
I searched for the TUXCONFIG file but could not find it in the tuxedo installation folder.
I read that i have to create the TUXCONFIG,if missing, using tmloadcf.exe and the ubbconfig file, but the only UBBCONFIG file is located in "\samples\atmi\rpcsimp\" folder.
How do i create the TUXCONFIG file?
Did i miss something with the installation? What location should this file exist after your tuxedo installation?
thanks
K
BOOT ERRORS:
PeopleSoft Domain Boot Menu
Domain Name: hrms
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
Attempting to boot bulletin board...
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
No bulletin board exists. Entering boot mode.
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents an
d Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:588: ERROR: Unable to open TUXCONFIG file
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:6272: ERROR: Unable to get bulletin board par
ameters
115818.SU1491!tmboot.2652.1488.-2: CMDTUX_CAT:825: ERROR: Process PSWATCHSRV at SU1491 failed w
ith /T tperrno (TPESYSTEM - internal system error)
115818.SU1491!tmboot.2652.1488.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; init
iating user error handler
115821.SU1491!BBL.2956.4352.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
115825.SU1491!PSADMIN.3088: End boot attempt on domain hrms
Edited by: user2932595 on Apr 17, 2010 1:17 PM
Edited by: user2932595 on Apr 17, 2010 1:21 PM

Hi
The TUXCONFIG file normally is created automatically when you create your domain.
In this case I think you ran into trouble because the path of installation is too long!
Note the error in your log:
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents and Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
Your path is 69 chars long!
I would suggest that you re-try the configuration with a shorter tuxedo and PS_HOME: perhaps in the root directory (c:\PSHOME)
In the past I've also noticed that installations have problems with paths that have spaces - ex: 'Documents and settings' , so I would avoid that as well.
Edited by: Alternate on Apr 19, 2010 2:00 AM

ERROR: Unable to open structapps file!

Hello,
Having modified the structapps.fm in FM10, I am getting the following error within a dialog when attempting to use the same file in FM8:
ERROR: Unable to open structapps file! FA_errno -43
Is FM not backward compatible ? OR do I need to reread the file in FM8
Thanks

The file should be saved in the FM version that you're using it in. You can't use any newer FM version file in any older version of FM, e.g. FM8 can't open any FM10 files (except for the MIF formats).

Unable to open .eps file "unknown format and cannot be opened" ?

A client sent me an .eps file (logo). I tried opening it in Illustrator AND photoshop (just to see if it was saved in one vs the other program) - however to no avail.
Illustrator gives me a message "unknown format and cannot be opened"
Photoshop gives me a message "photoshop was unable to parse the postscript".
I'm using Adobe CS4, and I've never seen this message before—would love to know what this means and how to resolve?
File attached if anyone is able to open / fix it?
Thanks kindly,
Chemol

Thanks for the advice Scott - does compression improve the .eps? Is it
silly for me to ask them to compress it since the file is only 766 KB
(that's how big the attachment is in my email - though I am unable to open
it)?
My friend is able to open it on his end - however the 3rd person (client) is
the one who sent it, and I have already requested a different version - no
response from them yet. Unfortunately what the company "has" is what he
will likely give to me again (ie: same file / unable to open). So ... I am
curious about how I can resolve this issue on my end - if possible?
Do you know what the AI and Photoshop error messages mean? Could the issue
be a mac vs PC concern? Or is it a corrupt file? Could it be a software
version issue (old vs new) ... or Quark incompatibility?
.... just guessing at this point....Any insight as to what different
scenarios may apply in this situation would be greatly appreciated ..thank
you.

Se37,se38 unable to open,,,,,

Similar Messages

Maybe you are looking for