SE38 error in upgradre 4.7 to ECC 6.00
Hi ,
We had upgraded from 4.7 to ECC 6 , we r geting following error in test system for t-code SE38
WBS:SAP System Message
Screen SAPLSEDTATTR 0200:DDIC Structure T002Twas modified during the run
Wat is the sol for this problem
Hi Ragavendra,
Now goto 4.7 and open the program:SAPLSEDTATTR screen 200, check T002T , compare this with ECC 6(goto se51,give the program name, screen no)
check thouroughly in some where in higher release your modification/adjustments went wrong(in SPAU/SPDD phase::Reset to original/Adopt modification).
Check SPAU/SPDD phase for cross verification, let me know if you found any difference.
Regards
Arani Bhaskar
Similar Messages
-
Hi people. I need to create a job to cancel automatically the messages with the status 17 (Application error - manual restart possible) in SAP ECC.
In SXI_MONITOR I can retrieve these messages filtering just for "Application Error". I can cancel them here, however I need for a Job to do it.
I appreciate your help.
Regards
Arturo SantosHi,
>Is there any way we can make this automatic
In RWB-Component Montoring-Adapter Engine-Communication Channel Montoring- Select the Adapter- Go to Settings and change as per your Business Requirement.
Regards
Agasthuri Doss -
#DATA Sync & # CONTEXT error in BI 4.1 with ECC 6 environment
I am getting the #DATA Sync & # CONTEXT error in BI 4.1 with ECC 6 environment. When i am adding Excel Sheet as asecondary source for BO report am getting this error. because of below,
Ecc data
Profit center -- 000100
Fiscal Year --- 2,014
Posting Period - 1 to12
Amount 2000
Excel Data
Profit center -- 000100
Discharge Date --- Q1 2014, Q2 2014,
Discharge Port --- Excelerate or Expediate, etc
I ahve created report Using ECC Data like, Profit center,Fiscal Year,Posting Period and Amount.
Now i want to Add from Excel Discharge Date and Discharge Port am getting the #DATA Sync & # CONTEXT error or Imcompatible object.
because i am anot able to merge these objects with ECC Objects. Can anyone suggest me what i can do to achieve this?
Cheers
Murali DurairajHi
Have you created two different data providers (one for ECC, another for Excel data)in
the webI report,
If yes -- check whether able to see data sample in the Excel data provider
Run the WebI Report -- Design Mode -- Edit -- Select the Excel Data Provider --
Check able to see the Data Sample data whichever there in the excel sheet.
If you are able to see the Sample data…then merge common objects (able to merge
only if both the objects have same data types.) then check the data in the
report. -
An error has occurred in the system "ECC" while copying the document
Hello Experts,
When I'm creating service orders in CRM UI and saving them I'm receiving this error:
An error has occurred in the system "ECC" while copying the document
Details:
An error has occurred in the system "ECC" while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occurred while transferring the document into another system. Refer to the enclosed log to view the error messages.
Transmission log
Error occurred during determination of profitability segment (Notification E IAOM 025)
Profit center for CRM integration not found (Notification E KECRMPCA 001)
Error occurred during determination of profitability segment (Notification E IAOM 025)
Account assignment error in internal order K1153000004111 for position 2000000990/0000000020 (Notification E C( 321)
Regarding to the account assignement, we developed a field to input Accounts IDS for WBS.
This field has a customization table related which allows to visualize in a dropdown list the allowed WBS ID per user according to the entries in the table.
Also, In the Service Order there is one status that triggers an action that creates a Sales Order in CRM that is replicated in ECC, but since I have this error Sales order is not being replicated in ECC.
Any ideas?
Kindly Regards,HI,
Please check these threads:
CRM-COPA- An error occurred in system EEPCLNTXXX during account assignment
http://www.riderspider.com/2010/11/error-error-occured-in-system-dv1cltecc.html#more
Denis. -
Thiis error when I execute RSA3 on ECC. Any hints?
Hi Experts,
can you help me figure out how to fix this problem:
I am on an IDES system used by many for training. I am execute rsa3 and enter any of these datasources:
0fi_gl_4 or 2lis_11_vascl
and I get the following ABAP screen; any way to get the data extraction going?
Thiis error when I execute RSA3 on ECC. u2018----
screen -
(2) ABAP DEBUGGER CONTROLS SESSION 2(EXCLUSSIVE)
method IF_EX_RSU5_SAPI_BADI~DATA_TRANSFORM.
field-symbols: <wa_ZOXID30163> type ZOXID30163.
break-point.
case i_datasource.
when 'ZMARA_DS'.
loop at c_T_DATA assigning <wa_ZOXID30163>.
<wa_ZOXID30163>-zztest = '123'.
endloop.
endcase.
endmethod.
u2018----
ThanksHi,
Looking at the code it seems like there is no error but someone has put explicit Break point in the code, now you have two options,
1) Once you get the above screen just press F8 and let the extractor proceed. But everytime this will be manual process.
2) Remove the Break-point statement from the code.
As you said it is asking for Access Key, then get your developer key generated on service.sap.com or contact to your basis team.
Regards,
Durgesh. -
RFC connection error between BW 3.5 and ECC 6.0
Hi gurus,
We've defined an RFC destination between BW 3.5 and ECC 6.0. Connection test (SM59) is ok, but authorization one fails and ALEREMOTE users block. These users on both systems have good profiles. We look ST22 and find a runtime error on CALL_FUNCTION_REMOTE_ERROR. We've cleaned source system on BW and RFC destination and we've created one more time, but error doesn't disappear. We've looked OSS but don't find anything.
Any idea? Is there any other place (users, RFC) where we have to change user password on system?
Thanks a lot!
Regards,
Iván.
Edited by: Iván Cabezas Castillo on Nov 6, 2009 12:09 PMSolved!
This is because of the incompatibility of password handling between
640 and 700 systems.
We have to use a maximum 8 character long password with only capital letters (numbers are also allowed) for the user "ALEREMOTE".
1. Change the password for the user in SAP R/3.
2. Maintain the password in SAP BW for the RFC destination (transaction SM59 - Logon/Security tab)
3. Authorization test is now successful.
(SM59 - Test - Authorization).
Regards! -
Error in Asset Transactions Report in ECC 6
Hi Friends,
We have upgraded from ECC 4.7 to ECC 6.0 in Nov 2007.
In Asset Transactions Report (S_ALR_87012048) the Depreciation column is displaying Zero Values for individual line items after November 2007 (ie for Assets posted after Nov, 07).
We posted the same to SAP and they are saying that since New Depreciation Calculation has been activated, Depreciation on Individual transactions will not be calculated.
SAP has quoted the following note:
As per note 965032 point 4d under the header 'No depreciations ontransactions' which states:-
.... if you use the new depreciation calculation, the system no longer saves depreciations on transactions in the line items. Exceptions to this rule are - proportional value adjustments in the case of retirements or retirement transfers, since these must continue to be calculated at single transaction level.
My questions are:
1.Even after this the report with depreciation values as Zero can be grossly misleading (other reports are showing correct values). Is it correct?
2.If what SAP is saying is correct, then How is this New Depreciation calculated? If anybody has an idea, please explain...
I hope i am clear in stating my requirements.
Thanks in advance.
SKHello,
Can you please look in the /put/log directory and copy the error from the appropriate log file. You should find a log file with a name similar the to upgrade phase that is causing the error.
Thanks
N.P.C -
Error when executing a query in ECC
W'e're getting the following error when attempting to run a Crystal Report (2008) that uses an SAP ECC query as the datasource:
Database Connector Error: "Screen output without connection to user"
Anyone seen this before? Tried looking this up in the forum but didn't find anything.
Thanks.Are you up to date on the Crystal ECC transports?
Is the user running the Crystal Reported assigned to the SAP query user group (SQ03/02)?
I have seen strange errors with these two things.
Why not upgrade to CR 2011? We found with our license there was no addiitional fee/cost to do this.
Tammy -
Error while running the RFC on ECC 6.0 server
Hello Champs,
The problem I am facing while sending the data for validation and invalidation from RFC on ECC server to Pi server to be send to a webservice. This scenario was working perfectly fine when the RFC was run on R/3 4.7 server. On upgradation of R/3 server to ECC 6.0 server we found the folowing error while we run the RFC on ECC server.
alternativeServiceIdentifier:party/service from channel configuration are not equal to party/service from lookup of alt ..
I have also re-imported the RFC's from ECC server to PI server and activated it again to overcome this problem, but still I am getting this error. Also I have done the CPA cache refresh too. But the problem still persist.
Some times when we keep on clicking on this error continously then we are able to get the desired results ie either valid or invalid. Is there something which needs to be done when we migrate the RFC from R/3 server to ECC server? Pls let me know how to solve this problem... Any help on this on priority basis is highly appreciated.
Thanking You in Advance.
Regards
S JoshiDear Rajesh,
I did the activity as suggested by you but still I am getting the same error while sending the order ID number from ECC 6.0 server. But when check the error in the Moni transaction I am getting the error as follow:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Not enough message parts were received for the operation.
This indicates that there is a problem on the receiver side.. Pls guide me......
Thanks
With Best Regards
S Joshi -
Error while applying temporary license on ECC system ?
Hi all,
I tried to apply temporary license in my ECC 6.0 system as license was expired and i was not able to login in client 000 with sap* user so i tried for temp license at OS level but it throwed an error, when i used saplicense temp at command prompt at OS level an error occured. Please see the error text below.
Connect to database failed
DbSlConnect failed with return code 29
When i checked with R3trans it gave an error RC = 0012.
I checked the log file trans.log , given below is the log file details.
4 ETW000 R3trans version 6.14 (release 700 - 28.07.08 - 15:52:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 25.03.2009 - 17:01:00
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Mar 25 17:01:02 2009 3924 0.003924
4 ETW000 [dev trc ,00000] db_con_init called 43 0.003967
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 58 0.004025
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 45 0.004070
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 7925 0.011995
4 ETW000 [dev trc ,00000] using "S:\usr\sap\PE6\SYS\exe\uc\NTAMD64\dboraslib.dll"
4 ETW000 41 0.012036
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 15 0.012051
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 29 0.012080
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.167)
4 ETW000 242 0.012322
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 26 0.012348
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 45 0.012393
4 ETW000 [dev trc ,00000] New connection 0 created 31 0.012424
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 48 0.012472
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 26 0.012498
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 25 0.012523
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 31 0.012554
4 ETW000 [dbsloci. ,00000] *** ERROR => Cannot connect: dbs/ora/tnsname in profile missing
4 ETW000 178 0.012732
2EETW169 no connect possible: "DBMS = ORACLE --- ORACLE_SID = 'PE6'"
Please help me out, i need it urgently so please help me out.Hello Rahul,
1. which license expired:permanent license or temporary license?
2. can you post sqlnet.ora and tnsnames.ora files here
Rohit -
Error While Installing Cluster on Windows ECC 6.0 SR3
Hi All,
We are doing ECC SR3 cluster installation with DB2 9.1 on windows 2003 server.
We have successfully completed ASCS,SCS & First cluster node installation.
we are getting error while DB2 Instance installation in step ,
configuring the database for MSCS.
we have prepared the MSCS.cfg file and while executing the db2mscs utility,
it is giving error as
DB21533E An error occurred during the migration of the DB2 instance, rc = "DBI1969".
MSCS.CFG entries are as follows
DB2_INSTANCE=DB2EOP
DB2_LOGON_USERNAME = OIASAPSRV\db2eop
DB2_LOGON_PASSWORD = oiaeopadm#3
CLUSTER_NAME=MYCLUSTER
GROUP_NAME=DB2EOP
IP_NAME=DB2 192.168.1.12
IP_ADDRESS=192.168.1.12
IP_SUBNET=255.255.255.240
IP_NETWORK=PUBLIC
NETNAME_NAME=DB2EOP
NETNAME_VALUE=OIADB
NETNAME_DEPENDENCY=DB2 192.168.1.12
DISK_NAME=SAPDATA (R:)
DISK_NAME=LOG (F:)
INSTPROF_PATH=F:\db2\db2eop\DB2EOP\db2_software
please replyHi Nitin,
make shure:
INSTPROF_PATH=F:\db2\db2eop\DB2EOP\db2_software
points to a shared drive!
DB2 will create the clustered instance there
Please read the header of the MSCS.CFG file:
INSTPROF_PATH This is an alternative way to specify a path on the MSCS disk
to contain the DB2 instance directory. Use this parameter
if the DB2MSCS utility is unable to obtain the drive letter
of the disk resource.
regards Siegfried -
ICM_HTTP_CONNECTION_FAILED error while testing HTTP RFC in ECC 6 IDES
Hi Experts,
I have ECC 6.0 IDES system - new installation. I have created client 100 which is a copy of client 000. Being an IDES system, client 800 is automatically created.
While trying to connect this system to PI 7.1, I have created one HTTP RFC (H) in client 100 giving the details of PI system which is working perfectly fine. I have maintained the SLD details as well. But on testing the same RFC on client 800, its giving me the error as ICM_HTTP_CONNECTION_FAILED. I have created the user in PI which is maintained as well.
Even If I create a new HTTP RFC connection in client 800, its giving the same error again. User in 100 & 800 is same and both having maximum authorizations. Any opinions on why I am getting the above said error in Client 800?
Thanks & Regards,
Naresh.Hi,
SMICM Trace file gives the following log when I am testing the HTTP Connection SAP_PID from SM59 of XYZ Client 100:
[Thr 896] IcmConnConnect: direct connect to <fully qualified hostname of PI system:50000>
[Thr 896] NiHsLGetNodeAddr: found hostname '<fully qualified hostname of PI system>' in cache
[Thr 896] NiIGetNodeAddr: hostname '<fully qualified hostname of PI system>' = addr xx.yy.zzz.lmn
[Thr 896] NiIGetServNo: servicename '50000' = port C3.50/50000
And when I am testing the same connection from SM59 of XYZ Client 800, getting the following log:
[Thr 4928] NiHsLGetNodeAddr: hostname 'proxy' not found by operating system
[Thr 4928] *** WARNING => Connection request from (55/18633/1) to host: proxy, service: 8080 failed (NIEHOST_UNKNOWN)
RM-T55, U18633, 800 ADMINISTRATOR, 19:18:49, M1, W2, SM59, 3/2 [icxxconn.c 2341]
I tried to take the restart of the system but still giving the same error.
Any suggestion???
Br,
Naresh. -
Error in loop at itab in ECC 6.0
hi,
in ECC 6.0, in an abap proxy class i have a loop statement as follows:
LOOP AT tablename.
sdfsdf
sfsfsf
s
fsf
ENDLOOP.
and i get the error, At "Loop At itab" one of the additions into/assigning or transporting no fields is required in OO context !! what does that mean ? in my abap proxy class can't i use the loop at statement's simplest form ?
whats the solution ?Sure you can, you just have to use an explicit workarea and use the INTO.
Types: begin of ttab,
fld1 type c,
fld2 type c,
end of ttab.
data: itab type table of ttab.
data: wa like line of itab.
Loop at itab INTO wa.
* Now the row is stord in WA, do what you need to here.
endloop.
YOu can NOT use internal tables with header lines in the OO context.
Regards,
Rich Heilman -
DDIC Activation error during SAP_HR component upgrade in ECC 6.0
Hi All,
We were upgrading the SAP_HR component in ECC 6.00 to SP 10 (SAPKE60009 - SAPKE60010).Upgrade is failed in DDIC_ACTIVATION step.
Below is the error message
Relationship T5FPBS4G-OFFGC for table T5FPBS4GO does not exist
Message no. MC683
Diagnosis
A secondary table for which the foreign key relationship no longer exists was included for an aggregate (view, matchcode, lock object).
Procedure
Find out whether the foreign key for the specified field was changed. It might be necessary to adjust the aggregate to the new foreign key definition.
In table T5FPBS4GO, Field OFFGC is there but Foreign Keys filed is unchecked
And in table T5FPBS4G there is no field OFFGC.
Could you please suggest me on this. If any one faced the issue please let me know.
OS: Windows 2003 Server
DB: MS SQL
BASIS and ABAP component on SP15
There is no information available in Note 822379 - Known problems with Support Packages in SAP NW 7.0 AS ABAP
Regards
Preethish,Hi,
Since it is DDIC activation its not possible also to revert. I sincerely suggest you to overcome the problem without deleting the entry in the table. I haved faced the similar kind of issue in my experience and i resolved with the help of abaper. I suggest you to just get a help from abaper and creating the table field and flag the foreign key in the particular table. It will surely resolve your problem.
Incase if you want to dlete the entry in database table level emans. Use this functional module
Spam_reset _status in se37 and by forcefully you can delete the entry of the component. adn also please chck in table also pat01 pat02 and pat03..delete manually.
Hope it will resolve ur problem
Regadrs
Vijay kumar G -
Error while transferring SALES ORDER from ECC to SCM
Hi Experts,
I am working with SCM4.0 and ECC 5, while i transferring the sales order from ECC5 to SCM ,it encounters with the following errore message.
<b>Sales order M-10 1000: Integration model does not contain material master
Message no. XC100
Diagnosis
To ensure a consistent dataset in SAP APO, the material master data for filter object Sales order M-10 1000 also has to be known in SAP APO. In the current case no entry was found for the combination in the models that were checked.
System response
Object Sales order M-10 1000 cannot be transferred correctly.</b>
Any kind of suggestions would be appreciated well.
Thanks in advance..
Regards,
A.FahrudeenHi Fahrudeen ,
I hope the master Data like Material and Location and Customer are not CIFed to APO prior to Sales order or else while ciffing the sales order you have not selected the sales order radio button and same time only enter the Material ,location and customer wothout the tick on filter objects for Mat/Loc and Cust.
Hope this helps..
Regds// Digs...
Maybe you are looking for
-
How to limit the creation of Contract in reference to a PR?
hi to all, my scenario is as follows: i create service activity in cj20n. the Purch Requisition # that is generated is made into a quantity contract (ME31K). however i noticed that i can create many contracts for that item. what i want is to be abl
-
Upgrade SAP XI 3.0 to SAP XI 7.0
Is there a list of checks that should be perform after the upgrade since is mainly a kernel upgrade (ABAP/JAVA).
-
Re: Oggetto: Re: Knowing the free space on a drive
-----Original Message----- From: Luca Gioppo <[email protected]> To: [email protected] <[email protected]> Date: Friday, March 19, 1999 9:13 AM Subject: Oggetto: Re: Knowing the free space on a drive Obviously the solut
-
Is there such a thing as a default administrator password?
I've searched these forums & elsewhere but haven't seen anything quite like this. My parents' new iMac was set up by someone else several months ago & I am visiting them for the first time since. Things generally work OK but they find that occasional
-
Inconsistent Alt - Right Click Brush Resizing in PS CS5
Anyone else seeing the new brush sizing gestures working inconsistently? If I hold down the Alt key and click the right mouse button... - Sometimes I see a red brush facsimile that I can resize or make harder/softer by moving the mouse right/left or