Se51 - maximum element size reached

Hi
I've a screen and i need to upper size of window, but appears msg "maximum element size reached".
I try seek in forum but i didn't find an answer.
Can somebody tell me how i change the maximum size ?
Thanks

Check this thread :
Re: Selection-screen problem only when in SE80

Similar Messages

Event ID: 4, Source: Microsoft-Windows-Kernel-EventTracing, maximum file size for session "ReadyBoot" has been reached.

Hello,
I upgraded my machine to Win7 x64 Pro about 3 weeks ago. My HW is an Asus mobo, Intel Q9450 w/8GB RAM. The boot drives are two Raptors configured as RAID01. All the drivers are the latest available from Intel, Asus and 3rd party vendors. My WEI is 5.9, limited by the disk transfer rates, otherwise 7.1 and 7.2 on the other indexes.
I've been receiving these errors at boot;
Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin
Source:        Microsoft-Windows-Kernel-EventTracing
Date:          11/10/2009 7:51:03 AM
Event ID:      4
Task Category: Logging
Level:         Warning
Keywords:      Session
User:          SYSTEM
Computer:      herbt-PC
Description:
The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 bytes.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
    <EventID>4</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>1</Task>
    <Opcode>10</Opcode>
    <Keywords>0x8000000000000010</Keywords>
    <TimeCreated SystemTime="2009-11-10T12:51:03.393985600Z" />
    <EventRecordID>28</EventRecordID>
    <Correlation />
    <Execution ProcessID="4" ThreadID="164" />
    <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
    <Computer>herbt-PC</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="SessionName">ReadyBoot</Data>
    <Data Name="FileName">C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl</Data>
    <Data Name="ErrorCode">3221225864</Data>
    <Data Name="LoggingMode">0</Data>
    <Data Name="MaxFileSize">20971520</Data>
</EventData>
</Event>
The image for PID 4 is listed as System.
My searches have turned up similar events listed but no solutions.
Any help would be appreciated.
Cheers!

Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035
As suggested above I assume this is a microsoft issue? It has been discussed here and other forums for quite some time. I never have seen a fix? I wish when we received errors of this nature microsoft would tell us what they were. How is this related to superfetch? What is superfetch? Why would superfetch have changed?
BY THE WAY.... Superfetch is on(started) is on automatic and logs on as local system. So this is not the cause of my issue. Also what is readyboot? Does the average computer really know what these programs/services or unique microsoft words/terms are?
System
Provider
[ Name]
Microsoft-Windows-Kernel-EventTracing
[ Guid]
{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}
EventID
2
Version
0
Level
2
Task
2
Opcode
12
Keywords
0x8000000000000010
TimeCreated
[ SystemTime]
2010-04-11T14:35:49.829600000Z
EventRecordID
25
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
48
Channel
Microsoft-Windows-Kernel-EventTracing/Admin
Computer
Daddy-PC
Security
[ UserID]
S-1-5-18
EventData
SessionName
Circular Kernel Context Logger
FileName
ErrorCode
3221225525
LoggingMode
268436608
Windows7, Windows, Win7

Maximum model size of 32k reached

Hi
I've reached the maximum model size of 32k.
The problem is that the dashboard I'm creating is still only a fifth of what the final solution will be.
So now I'm trying to think of ways to split the model into five models. And hopefully still maintain communication between the models.
Anyone have any ideas?
My thoughts this far is to have a "main" model that implements four other models through the "HTML view".
The best solution would be to implement the other models as external IViews but I don't know if it's possible.
BR
//Robin

Hi Michael
I think I'm not explaining my problem properly
I have created my model in the way that you described it. But it's just One model. And it's growing too big. Compilation is taking too much time and I sometimes get the 32k error message.
What I would like to do is to split the model into several models. Ex: 1 model with navigation and 1 model for each view. But I dont know how to do this.
I know that I could have 2 models in separate IViews in a portal page that could communicate through events. But I don't know how to put 2 IViews on top of each other and toggle between them.
What I hope will be implemented in VC is the ability to create an IView that links directly to another precompiled model.
BR
/Robin

Maximum file size for export into MP4?

Hello,
I am not able to export 2 hour HD video into standard MP4 file. It seems that reaching 100% export algorithm gets into loop. I was waiting for hours and still had seen progress at exactly 100% with final file size on hard disk to be 0 bytes. I am using CS5 on MAC OS X. I had to split my timeline to 2 parts and to export them separately (which is embarrasing). Is there something like maximum file size for export? I guess that 2h video would have about 25-35GB.
Thank you
jiri

You are right.
So I am running AP Pro 5.0.4, Adobe Media Encoder 5.0.1.0 (64bit). Operating system Mac OS X ver 10.7.3. All applications are up to date.
MacBook Pro Intel i5 2.53GB, 8GB RAM, nVidia GT 330M 256 MB, 500GB HDD
Video is 1920x1080 (AVCHD) 25fps in a .MTS container (major part of timeline), 1280x720 30fps in .MOV container (2mins), Still images 4000x3000 in .JPG
No error message is generated during export - everything finishes without any problem...just file created has 0 byte size (as described above).
This is my largest video project (1h 54min) I dont have any other problem with other projects.
I dont run any other special software, at the moment of export all usual applications are closed so that MacBook "power" can go to Media Encoder. No codecs installed, using VLC Player or Quick Time.
Attached please find printscreen from Export settings (AP Pro). Writing this ppost I tried to export only the first 4mins from timeline where all kind of media is used...and it was OK.
As a next step I will try to export (same settings) 1h 30mins as I still believe problem comes with length of video exported.
Let me know your opinion

Maximum File size on DMP

Hello,
Is there a maximum file size that DMP 4400G can support. We are trying to upload a 7GB MPEG file to the DMP with an attached 16Gb USB flash drive. However, it fails when it reaches 56% with an FTP error: ( "Unable to write data to the transport connection: An existing connection was
forcibly closed by the remote host.")
Is there a maximum file size that the DMP FTP daemon supports?
Thanks

I am not aware of any File size limitations in the DMP.
I tested with DMP-4400G running 5.2.
I created a 7GB file and used FTP (Filezilla) to upload file to
USB2 on the DMP.
The file transfered without issue.
I would suggest trying a different file and test
transfer again.
For Example:
(linux, OS X, unix)
command = dd
dd - create a large file for testing
Description
To create a 7 GB file:
# dd if=/dev/zero of=file_7GB bs=7m count=1k
Example
dd if=/dev/zero of=file_7GB bs=7m count=1k
* What FTP client are you using?
* What format type is file?
* What version of code on the DMP?
* What file format is used on the external USB drive?
* What manufacturer & model# of the flash being used?
Thanks
T.

Maximum IMD size that can be processed by Meter Data Management v2.x

Does anyone know the maximum IMD size that MDM 2.x can process? I was trying to process an MV90 Interval IMD with 15 minute cuts for a period of 6 months (trying to load historical usage in one go). MDM is timing out and failing to process the IMD. The IMD has been created and is failing when I am trying to do Additional Processing (with just a dummy VEE group so no 'real' validation is happening).
Edited by: user12984550 on Jun 4, 2012 1:15 PM

You have to options:
1. The router that is internal must have a static route to the ASA to reach the VPN networks and must have a distribute static so that other routers that form part of EIGRP know how to route to the VPN networks.
2. You can configure on the ASA "set reverse-route" on the crypto map then configure EIGRP on the ASA and add redistribute static so that routes learned via VPN (considered static routes) can be pushed through EIGRP.

Auto Extend is on , but maximum file size is 3276MB

Dear Experts,
small Doubt , Auto Extend is on in my DB . it is automaticaly extending the table space when datafile is full , increment size is 10240 KB. but my doubt is what is maximum file size it is showing 3276MB . what happend if we reach there?
Arun

Your datafile max size is set to 3276 mb (3.19GB).
Once your datafile reaches the specified limit, you need to add more space to tablespace by adding additional datafiles.
In your case you can set maxsize to unlimited by altering(For 8k block max size of datafile could be around 32 gb)
SQL> create tablespace autoextend datafile '+TEST' size 50m autoextend on maxsize 1g;
Tablespace created.
Created tablespace with datafile autoextend on and maxsize 1G;
SQL> select file_name,file_id from dba_data_files where tablespace_name='AUTOEXTEND';
FILE_NAME
FILE_ID
+TEST/clonev/datafile/autoextend.1346.790792253
139
SQL> select autoextensible,maxbytes/1024/1024/1024 "G" from dba_data_files where tablespace_name='AUTOEXTEND';
AUT Gb
YES 1
SQL> alter database datafile 139 autoextend on maxsize 2g;
Database altered.
SQL> select autoextensible,maxbytes/1024/1024/1024 "G" from dba_data_files where tablespace_name='AUTOEXTEND';
AUT G
YES 2
We changed maxsize from 1G to 2G
SQL> alter database datafile 139 autoextend on maxsize unlimited;
Database altered.
SQL> select autoextensible,maxbytes/1024/1024/1024 "G" from dba_data_files where tablespace_name='AUTOEXTEND';
AUT G
YES 31.9999847
You could see maxsize limit of 32GB,
you can check following note
What is The Maximum Datafile Size Limit In Oracle Database 10gR2 [ID 804733.1]

My service is converting from SendNow Plus to Adobe Send; what is th maximum file size?

My service is being converted from Adobe SendNow Plus to Adobe Send. There is very little detail on differences that I can expect between the two services.
What is the maximum file size that I can send? Is there a maximum?
Do I have a storage limit? It was 2GB with SendNow.
The files in SendNow have a time limit, but I cannot find anywhere this is defined in Send.
Lastly, my subscription rate is higher than the rates quoted on the Adobe website, but I cannot find a way to correct this or make a change.

Hi Raghuveer,
Thanks for quick reply. Sorry, I prefer not to share my designs so I cannot send you my sample of Ai file or screenshots. I hope you understand.
Anyway, I have about 50 to 60 elements used 3D effects and 60 elements used brushes. And about 20 some elements I defined as pattern swatches (about half of them used gradient). Also, added drop shadow, zigzag effect and accent edges on 5 elements. And 3 layers filled with patterns (my artboard size is 1220 px W x 1500 px H). I have my layers/artboard/ color & pattern swatches/ appearance panels opened up when working in Ai.
I hope this gives you some idea how much I am doing and what I am doing with my Ai file. And hope that you can advise if there should be problem if doing a lot in one file? I just cannot stop designing sometimes.
Added this- I have 18 artboards and 22 layers in my Ai file. Photoshop doesn't have this problem when working with a lot of layers, only Illustrator does.
Thank you very much!!
mykw123

The initial heap size must be less than or equal to the maximum heap size.

All,
Please help!!
I have tested my Application Client Project in WSAD on my pc and it works fine.
I have 1gb RAM on my pc. When I deploy the same app on another xp pc(same as mine but 512mb RAM) I get a heap size error. Here is the exact error:
Incompatible initial and maximum heap sizes specified:
initial size: 268435456 bytes, maximum heap size: 267380736 bytes
The initial heap size must be less than or equal to the maximum heap size.
The default initial and maximum heap sizes are 4194304 and 267380736 bytes.
Usage: java [-options] class [args...]
(to execute a class)
or java -jar [-options] jarfile [args...]
(to execute a jar file)
where options include:
-cp -classpath <directories and zip/jar files separated by ;>
set search path for application classes and resources
-D<name>=<value>
set a system property
-verbose[:class|gc|jni]
enable verbose output
-version print product version
-showversion print product version and continue
-? -help print this help message
-X print help on non-standard options
Could not create the Java virtual machine.
Press any key to continue . . .
Here is the batch file that runs my app:
@echo off
SET appClientEar=C:\corp\apps\mts\jars\MTSClientEAR.ear
set JVM_ARGS=-Xms256M -Xmx256M
set CLIENT_PROPS=C:\corp\apps\mts\jars\medicalclient.properties
set APP_ARGS=
call C:\bnsf\IBM\WebSphere\AppClient\bin\launchClientBNSF.bat "%JVM_ARGS%" %appClientEar% "-CCpropfile=%CLIENT_PROPS%" %APP_ARGS%
@pause
I have changed the value of Xms and Xmx of JVM_ARGS to different size but I sitll get error. Anyone knows what the problem is. Thanks..

Don't know why, but the "maximum heap size: 267380736 bytes" value is just slightly less than 256*1024*1024, wheras the reported initial size is equal to that.
Try setting the initial value to 255MB.

How to change font size, maximum column size in the result screen ?

hi All
That's great when using SQL Dev.
But I also have a trouble that how to change font size, maximum column size in the result screen ?
My users think that font in result screen is shown very small, and whenever the data in each colum is long then it's not shown full data in column, they must double click for extend the size. Have the option to default the max size for showing full data in each column ? I try but still not to do that .
Appreciate for anyone to help us.
Thanks all.
Sigmasvn

You can't change the font for the results screen yet, however you will be able to select an auto-fit option for selected columns, so if some columns have slitghtly wider text you'll be able to set the column widths to handle these wider columns.
Also, there s the option of switching the layout of a record in the grid.
Sue

What is an idea of maximum file size for a film in Captivate?

Hi there,
I'm creating an elearning course in Captivate 7, and it is being published as HTML5. This means the films I've imported are being converted to MP4s, and they are around 10-20mb in size once they've converted. They seem very slow to load on some computers - do you think the file size is too big? Or could it be another issue? Does anyone have a recommendation for maximum file size for films? They are 572 x 322px and around 1-2 mins in length.
Thanks in advance

Probably better guidelines that dictates 'size' of a vi are:
typically no more than 1 video screen in size
is it legible
and is it's function and operation clear.
I have seen examples of '1 vi does it all' that were many screens wide and tall, totally a flustercuck, and nearly 1 MB in size.
Globals and local variables (except for LV2 style) are typcially shunned for they can create a host of problems (race conditions, indeterminant data).
Use connector pane to wire controls and indicators to. Then use wires between vi's to transfer data. I tend to use clusters to hold shared data.
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

Maximum file-size for HR EIC emails

Hi folks
We currently use EIC in ERP, and have an issue with sending large emails/attachments as the maximum file-size appears to be only 2MB. This is set in the IMG activity Employee Interaction Center (EIC) -> Interaction Center Web-Client -> Communication Channels ->E-Mail -> Define E-Mail Profiles, the attachment maximum size is set to a maximum of 2,147,483 bytes.
I have tried searching for anyone else having a similar problem, but haven't found anything. I would imagine many customers would have EIC users in a Shared Services environment sending attachments over 2 meg; so before we log a call with SAP, has anyone else had this issue and how did you resolve it?
Thanks very much.
James

The maximum value is 2,147,483 bytes, which is what the config is set to. This seems pretty low, especially in this day and age.

Maximum font size for auto-sized form text

You need to let the user select a maximum font size for automatically sized text. If most of your fields are set at 10pt type, but you have one field for which you want the text to resize automatically, it looks stupid if that cell contains a small amount of text that’s set at 16pt or whatever. If you could set the maximum font size to 10pt for that field, then the text would be consistent with the text in the other fields unless there is so much text that it needs to scale down.

Can anyone please advise?
Cheers

Set maximum panel size

Hi,
I would like to know how can I set the maximum panel size, in order
that when I maximize it with a state property node set to 5 (maximized)
when I open it, it don't pass the size I want for that panel.
How Can I do It? I can set the minimum panel size, in File->Vi
properties->Window size but I can't set the maximum panel size?
Thanks,
ToNi.

Hi,
From my vi, before I call another vi from it, I have a FP Open and FP.
State property set to True and 4 (Minimized) respectively and then I
use a Run Vi invoke node and finally, after it, I have another FP.
State property set to 1 (Standard). My front panel when opens has
the same size as I saved it but LV not redraws it well. How Can I do to
solve this kind of problem? I have this problem since a lot of time ago.
ToNi.
Attachments:
sample.JPG ‏40 KB

What is the maximum file size for CSV that Excel can open ? (Excel 2013 64bit)

Hello,
Before anyone jumps in, I am not talking about the maximum worksheet size of 1048576 rows by 16384 columns.
I have client whom has a 1.5 Gb CSV file, 1.9, 2.6, 5, 17 and 89 Gb file (Huge).
If I open the 1.5 Gb, the file opens (After waiting 5 minutes) and then a warning pops up that only the first 1048576 rows have loaded. That is fair enough.
If I try and open any of the others, Excel comes up to a blank worksheet. No errors. It just seems to ignore the file I tried to open. This happens from within Excel (File - open) or from double clicking the file in explorer.
Excel goes to this blank page almost imeadiatly. It does not even try to open the file.
If I try with Ms Access, I get a size warning and it refuses to load the file. (At least I get a warning)
I would have expected Excel to load at least the first 1048576 rows (If that is what there are in the file), and give an error.
The computer is more than capable (Xeon processors, 16 Gb ram, SSD hard disks top of the line HP Z820 power workstation).
With the 1.5 Gb file loaded to 1048576 rows, it uses 15% ram/pagefile. CPU's hit about 5%.
I have confirmed it is Win 7 64bit, Excel 64bit. I am fairly confident we are over the file size but without an error message, I don't know what to tell my client whom is looking to me for answers.
I have already discussed that the 89gb file in Excel is unreasonable and they are looking at a stat's package but I need an answer on these smaller files.
Anyone got any ides ?
Michael Jenkin (Mickyj) www.mickyj.com (Community website) - SBS MVP (2004 - 2008) *5 times Microsoft MVP award winner *Previously MacWorld Australia contributer *Previously APAC Vice Chairman Culminis (Pro IT User group support system)* APAC chairman GITCA
*Director Business Technology Partners, Microsoft Small Business Specialist, SMB150 2012 Member

Hi,
The 1,048,576 rows & 16,384 columns is the
workbook size limitation in Excel 2013. Thus, I recommend we try the Mr. Bernie's suggestions to import the large CSV file.
1. Use VBA to read the file line by line and split/examine the import file in sections. If you have further question about the VBA, please post your question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
2. Use Excel 2013 add-ins. Power Pivot and Power Query. For more detailed information, please see the below articles:
http://social.technet.microsoft.com/Forums/en-US/9243a533-4575-4fd6-b93a-4b95d21d9b10/table-with-more-than-1-048-576-rows-in-power-query-excel-2013?fo
http://www.microsofttrends.com/2014/02/09/how-much-data-can-powerpivot-really-manage-how-about-122-million-records/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Thanks
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

Se51 - maximum element size reached

Similar Messages

Maybe you are looking for