Seagate drive failed used HP recovery cds and windows wont finish the install...

Hello FOlks First time poster long time reader.. ...
I have an older HP A6567c machine.. that has been retrofitted with almost everything new minus the motherboard,processor and ram... ive swapped power supplies gpu and of course HD..so heres my issue..
I use a seagate 1tb hd.. it recently failed on me so i sent away for a replacement since it was under warranty.. they shipped me out a nice refurbed 1tb drive that is half the width of my older one.. which i thought was odd.. but i installed it anyways.. i ran the HP 3 cd recovery al was fine until it went to completing your windows installation.. and then i got an error message saying it could not complete my windows installation.. please reinstall windows.. i was dumbfounded.. ive replaced maybe 4 or5 drives in my time and ive never seen this.. so i read somewhere to unplug printers and gpus and anything extra so i did that retried and same issue.. so i went diggin around and found an article stating that older HP recovery cds dont allow certains drivers to be installed during recovery session like what the new style HD's require ..and going off that premise i ended up finding a few more articles where folks had said the same thing..
So im at a loss for why the recovery cds wont work.. anyone know if their are newer style recovery cds that work with newer hard drives ? ive read some HP forums where others had the issue and have had mixed replies from HP support one tech saying they had to buy all new recovery cds while the other tech told a customer they had to upgrade their OS.. I suppose i wouldnt mind upgrading to Win7 from my vista 64 home prem. i hear win 7 is nicer.. but i only run 4 gig ram so would win7 run on my machine ?
Also if their are a new style hard drive .. whats the beef with them ? what makes them so different to the older ones.. sadly with this being a holiday weekend im SOL on getting ahold of Seagate.. so im stuck waiting til monday dec 1st to get ahold of them.. but i was hoping someone might come across this and give me some ideas..
thanks ,
Starbuxx
This question was solved.
View Solution.

Hi,
Run the BIOS hardware diagnostic and make sure that your PC is OK. Check with Seagate and make sure that the hard drive that you received is not an advanced format hard drive as these types of drives will not work with the older HP recovery programs.
If your PC is not running BIOS version 5.32 or higher and has 7GB or more then remove some memory dimms to reduce the total to under 7GB. You can install the latest BIOS updates after your PC is recovered.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

I installed the new 5.0 version and it keeps telling me I have to resart my computer. But it wont finish the install after it resarts. What is wrong and how do I fix it?

I installed the new 5.0 version of Firefox and the thing keeps telling me i have to resart my system to finish the install of an old version. I resart and it doesnt do anything. What is wrong and how do I fix this. I have been using firfox for more than a year now and have never had trouble till this issue came up

If the toolbar installed something into the rest of the system, you will see an entry in the Control Panel in the software uninstall applet which should be removed. You might need to make a new profile if you cannot find an extension that has something to do with the toolbar.
http://kb.mozillazine.org/Uninstalling_toolbars

Touchsmart IQ524 hard drive crashed. Ran Recovery CDs and I get an error Windows can not install on

I have an HP Touchsmart IQ524 which the hard drive crashed. I replaced the hard drive with the exact same model. I run the Recovery CDs (which I purchased from HP website) and it goes all the way through the process and after the reboot I get a message that "Windows can not install software on this hardware" - so it never completes the process. I have formatted the hard drive and bought and returned 3 hard drives. Any suggestions and assistance will be greatly appreciated.

Hi:
I love recovery disks when they work, and HATE them when they don't.
Fortunately, I have a workaround for you which isn't as good as a recovery disk, but it is better than pulling your hair out, and getting nowhere.
First of all, before you try this, did you perform the recovery with only the keyboard and mouse connected?
Did you buy the same size or larger hard drive?
If your answer to either question is no, then that may be the problem.
Now to the workaround...
If you're up to a slight but rewarding challenge you can make your own if you can read your 25 character Vista product key on the PC.
Just download the 3 files you need at the link below, and read all of the instructions to create a bootable DVD installation disk using imageburn.
Disregard the part of the text under the first screen shot about "extract the files to the Vista folder."
The files were already extracted to that folder when you ran the X14.exe file by reading the text on top of the first screen shot.
The other thing I noticed is on the 4th screen shot, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in myself, and then the other codes automatically populated.
When I went to compile the ISO file, ImageBurn gave a message that about a WIM file and ISO, and if I wanted to burn it in a different format.
I selected No, make the ISO file.
It was not that hard to do. I burned both the 64 bit disk and the 32 bit disk in case I ever need them.
I tested both of them on my hp dc7100 CMT desktop PC, they worked perfectly.
When you enter the product key, it knows what version of Vista you have.
http://en.community.dell.com/support-forums/software-os/w/microsoft_os/3317.2-3-microsoft-windows-v....
After you successfully install Vista, you can then install the drivers from your PC's support and driver page.
Paul

ITUNES FAILS TO IMPORT OLDER CDS AND FREEZES

HI ALL--FIRST TIME POSTING LONG TIME READER!
As the description heading indicates, my itunes has started failing to import older cds and hten freezes up? Anyway to circumvent this? How do i import these cds--should i burn same first to a nwer CDR? Please advise. Is this a common problem?

You are getting the opposite of my problem. For me, newer CDs give problems not older ones. There are several options available. No particular order, not all options.
Import as mp3 with another program. (Rip with another program, import with iTunes)
Update drivers for current drive.
Replace drive.
Uninstall then reinstall iTunes/Quicktime.
New computer. :-}

Partitioning an External 320gb drive for use with Time Machine and...

I want to be able to use my Western Digital 320GB external drive for use with Time Machine and to use as extra storage space on both my Mac and when I boot into Windows Vista.
Is this possible?
I was playing around in Disk Utility and would I partition the part I want to use for Time Machine with the Mac OS Journaled, and whatever I want as space for windows, use a MS - DOS format?
Has anyone done this before?
Cheers-

Unless you are using 64 bit version of MSWindows (64 bit XP/Vista), it won't be able to handle a disk with GUID partition table (GPT). Disks with Apple Partition Map (APM) or GUID partition table are the only ones that Time Machine will work with (not MBR disks). Note also that the MBR/APM/GPT are at the DISK level and not the partition level, so don't mix the format with partitioning scheme. Time Machine disks are meant to live in the Mac universe (for now, anyway) and sharing with the MSWindows 32-bit universe is not possible.
See http://img87.imageshack.us/my.php?image=macpcdiskdd06sv8.png for some additional background.

I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail

TS3694 I was making the update for my iphone 4s . then he stops. My phone in this time is in the recovery mode and do not take the firmware to open my phone, please can u help me to recover my phone. My current ios 6.0.1. plese send me some thing that is

was making the update for my iphone 4s . then he stops. My phone in this time is in the recovery mode and do not take the firmware to open my phone, please can u help me to recover my phone. My current ios 6.0.1. plese send me some thing that is useful

Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474.

Pls.help my iphone stuck in recovery mode and itunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..

pls. help my iPhone stuck in recovery mode and iTunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..before it was just stuck in an apple logo but when i tried recovery mode to itunes then it stuck..

Hi awison,
If your iPhone is not recognized by iTunes on your Windows computer you may want to use the steps in this article to troubleshoot -
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
This may also resolve your recovery mode issue. If it does not, use the steps in this article to resolve it -
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Thanks for using Apple Support Communities.
Best,
Brett L

I have CS6 on my iMac. I want to load it onto an external drive to use off my Mac Air. I have the serial number. How do I do this without having to subscribe to CC?

I have CS6 on my iMac. I want to load it onto an external drive to use off my Mac Air. I have the serial number. How do I do this without having to subscribe to CC?

Note the min-requirements for PS CS6 on a Mac.
Mac OS
Multicore Intel® processor with 64-bit support
Mac OS X v10.6.8 or v10.7
1GB of RAM
2GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash-based storage devices)
1024×768 (1280×800 recommended) resolution display with 16-bit color and 256MB (512MB for Extended) of VRAM
OpenGL 2.0-capable system
DVD-ROM drive
Nancy O.

When icloud drive is on on in ios8 and 8.0.2 the keyboard shortcuts do not work.

When iCloud Drive is on on in ios8 and 8.0.2 the keyboard shortcuts do not work.
ANyone found a solution to this?
I Have tried it several times and when tured off iCloud Drive and tested the shortcuts on an email, all was working ok...turning icloud drive on again and again the keyboard shortcuts stoped working. Solutions?

Hi Susana,
I have a similar problem: when updating to iOS 8 my iPhone 5 the shortcuts disappeared and more over the keyboard often gets stuck. When repeatedly turning off iCloud drive the shortcuts are present again and the keyboard works as it should. A factory reset of my iPhone was not successful.
The only "workaround" seems to turn off iCloud drive, however, this is of course no solution at all.
Since reports on keyboard malfunctions are rather rare in this community, I think, you and I are using some special settings or apps which cause this problem.

I have downloaded music to my Itunes library from CDs and want to copy the music to blank CDs. Is there a way to achieve this?

I have downloaded music to my Itunes library from CDs and want to copy the music to blank CDs. Is there a way to achieve this?

Make a playlist of the items you want to burn, put a blank cd in the drive and burn the playlist to it.

Help. Buy recovery disks and I have not the order number.

A few hours ago, I bought online recovery disks and not sent me the order number or track.
As I can get it?

Hi,
Use the below link to check the order number using the email address or the serial number of your unit. If this does not works, then contact HP Support on phone.
https://h10025.www1.hp.com/ewfrf/wc/serviceOrderStatus?cc=us&dlc=en&lc=en
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

There probably is, but it requires that you be able to use punctuation and write in sentences so that we can understand exactly what you want.
You can block others from using your Apple ID by changing your password. There is no way to erase what was already downloaded on to someone else's device, for obvious reasons,

I have just acquired an iMac desktop. I want to sign on to my airport wireless network, but cannot remember the password. How can I access the password or reset it. I already use a MacBook Pro and an iPad on the network.

I have just acquired an iMac desktop (about 4 years old). I want to connect to my Apple airport wireless network, but cannot remember the password. How can I access the password or, if necessary, reset it. I already use a MacBook Pro and an iPad on the network and don't want to jeopardize what already works well. I am not all that computer literate.

How can I access the password or, if necessary, reset it.
Read the user manual that came w/your Airport router or you can cross-post in one of the AirPort Forums for instructions.

Problem with setting up new Ipad Air2:I can't set up my new Ipad using new Apple ID and it keeps showing the notification that wrong email or password and try again. I can log in Itune with thesame

I can't set up my new Ipad using new Apple ID and it keeps showing the notification that wrong email or password and try again. I can log in Itune with the same ID. Please help me if you have come across the same issue. Thank you!

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

Seagate drive failed used HP recovery cds and windows wont finish the install...

Similar Messages

Maybe you are looking for