Seagate drive GoflexD won't mount.

Wouldn't mount on a PPC iMac (circa 2006 running 10.5.8) and won't mount on my new iMac either. Drive shows up on "about this Mac" under USB (3.0 SuperSpeed bus- FA GoFlex D esk) but doesn't show in disk utility. After many calls to Seagate they suggested a new cable and that had no effect. Eventually,they exchanged the drive and gave me a new one. The new one didn't mount on the old iMac or the new iMac. And,yes, I've disconnected and reconnected the USB cable,power supply and rebooted several times.
As I never trashed anything on the original hard drive I haven't lost any data so,I guess,I can discard the Seaflex and try another drive.
Any suggestions?

Is there any help under 'More Like This' on the right? >>>>>>>>>>>>>>>>>>>>>>

Similar Messages

External Iomega Drive Partition won't mount

Hi:
I have a partition on my Iomega external drive that won't mount. The drive has 2 partitions. One I use for back up works fine. This other one is visiable but won't mount. I have run disk utitility and it says everything is fine but says it isn't journaled. It won't let me turn on journaling and won't let me get it mounted, what can I do?

Hi Dennis:
Thank you for your attempt at helping me. I opened Disk Utility and saw the greyed out "video Editing" partition, clicked on it and tried to mount it. It says it cannot mount the volume. I then clicked on the greyed out drive partition and clicked on disk first aid. It gives me the following screen.
Verify and Repair volume “Video Editing”
Checking Journaled HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Video Editing appears to be OK.
It just plain won't mount but I have in the past been able to see the contents inside and the other partition for which I use as back up for my iMac works just fine so I know the drive is working fine. I just cannot get this partition to mount.
Any other ideas?
Thank you,
Reid

My external hard drive suddenly won't mount.

I have a mac 0sx version 10.5.8. My WD hard drive suddenly won't mount. Tried running a repair with disc utility-no luck.

Your best bet is DiskWarrior...
http://www.alsoft.com/DiskWarrior/

10.4.9 and now USB Hard Drive(s) Won't Mount

After running the combo updater on my Intel Core Duo iMac 17" my LaCie BigDisk won't mount nor will my 60GB USB hard drive that I use to backup my MacBook (though this drive DOES mount on the MacBook without any problems). All other USB devices (and my 160GB Western Digital USB Hard Drive and 300GB Seagate FireWire hard drive mount and work fine on the iMac). My LaCie BigDisk wouldn't mount on my MacBook at first, but eventually mounted ONCE on the MacBook. I have tried repairing permissions, rebooting, using an older IOUSBFamily.kext (that was a nightmare and required some CLI experience to undo without having to find a firewire cable that long enough to reach around my desk to use the iMac via Target Mode on the MacBook good thing I saved the original).
At any rate here is the error output in Console.app:
Mar 13 20:32:59 iMac kernel[0]: USBF: 426. 4 ControlTransaction: control packet 1 error 0xe0004057
Mar 13 20:32:59 iMac kernel[0]: USBF: 426. 4 AppleUSBEHCI[0x3af4000]::DeviceRequest - buffer dmaCommand (0x39b3900) already had memory descriptor (0x3f54a00) - clearing
Mar 13 20:32:59 iMac kernel[0]: USBF: 426. 5 AppleUSBEHCI[0x3af4000]::ControlPacketHandler - unexpected command BufferMemoryDescriptor(0x46a0d00)
Mar 13 20:32:59 iMac kernel[0]: USBF: 426. 35 AppleUSBEHCI[0x3af4000]::DeviceRequest - dmaCommand (0x39b3900) already had memory descriptor (0x46a0d00) - clearing
Mar 13 20:34:08 iMac kernel[0]: USBF: 495.663 AppleUSBEHCI[0x3af4000]::Found a transaction which hasn't moved in 5 seconds on bus 253, timing out!
[Above Repeating for a long time]
Mar 13 20:34:12 iMac kernel[0]: USBF: 499.351 [0x3bd7800] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of hub @ location: 0xfd300000)
Mar 13 20:34:12 iMac kernel[0]: USBF: 499.352 [0x3bd7800] The IOUSBFamily was not able to enumerate a device
Any help would be appreciated!

Anyone else having this problem?
Possibly.. my Lacie hard drive (firewire) has stopped working since I updated to 10.4.9 with the device attached. See: http://discussions.apple.com/thread.jspa?threadID=889519&tstart=45
iMac G5 iSight 2.1GHz, iBook G4 1.42GHz, iMac G3 Snow 700MHz, 2x iSight Mac OS X (10.4.9)

Drive Suddenly Won't Mount

I've had a 500GB Seagate external drive connected via firewire for my Time Machine for awhile now. I've used time machine with it to recover files, it always mounted and ejected fine, never had any problems, etc.
Today, all of a sudden, it won't mount. The weird part is the drive is operating. Something is writing to it - it's write light is blinking and I can hear it working. Still won't mount. I tried it on a different mac, same deal. It shows up in Disk Utility, but all of the buttons are grayed out. I can't verify or repair it. When I try to erase the drive via Disk Utility, it says it failed because "Resource Busy". Time machine is not writing to it. What the **** could be writing to it without me knowing?!
Anyone experience this before?

For some reason, with my WD 160GB drive, when I plug it in and it turns on, but it never mounts. I have to go into disk utility and wait, and wait, and wait, until it shows up in disk utility (a few minutes) then I have to select the drive and click on mount. It started doing this within the past few months. I have no idea why, but it's a pain.

External hard drive suddenly won't mount, but shows in Disk Utility.

Running OS 10.6.8... Disk Utility sees it and there's no issues when verified or repaired. The partition is grayed out and won't mount through Disk Utility. I've also tried mounting via Terminal, but same result. I've connected other drives, so I know it's not the wires or ports. When I turn the power on, it spins up and seems to be working properly. I don't have another mac to test it on. Any ideas would be greatly appreciated.
Here's the info from Disk Utility:
Name :     BACKUP
    Type :     Volume
    Disk Identifier :     disk1s10
    Mount Point :     Not mounted
    File System :     Mac OS Extended (Journaled)
    Connection Bus :     FireWire
    Device Tree :     IODeviceTree:/PCI0@0/RP05@1C,4/FWBR@0/FRWR@0/node@30e0f4e010a9d6/sbp-2@c000
    Writable :     Yes
    Universal Unique Identifier :     C3BC8998-F686-3A0F-A1AF-11260799EABA
    Capacity :     319.94 GB (319,937,773,568 Bytes)
    Owners Enabled :     No
    Can Turn Owners Off :     Yes
    Can Be Formatted :     Yes
    Bootable :     Yes
    Supports Journaling :     Yes
    Journaled :     No
    Disk Number :     1
    Partition Number :     10

You don't have a PowerMac if you have a Mac Pro. You don't have a PowerMac if you have Mac OS X 10.6. PowerMac is the name for the desktop professional Macs prior to mid-2006.   Two possibilities, the drive is dead, or the drive has a bad directory.   For a fee you can isolate either on my FAQ*:
http://www.macmaps.com/directoryfaq.html
* Links to some of my pages may give me compensation.

External hard drive suddenly won't mount

Although I've not had a problem with this drive in the past, it all of a sudden won't mount. It has all my music on and stalled while I was using iTunes, the timer wheel came up and was still the same after 20 minutes so I closed down. Now the drive won't mount at all so I can't even try repairing the disk. I've tried swapping from firewire to USB cables and also going through a hub, neither have worked.
It's a Lacie and the power light stays continuously orange on it and it feels like it's working overtime.
PLEASE HELP!

A little bit more on this... I looked at the instructions for the Lacie and it said that some smaller laptops may require a power cable via a USB port and back into the Lacie, which now works but I'm wondering why this has happened all of a sudden and can I rectify it??
I've deleted a load of stuff off my ibook hard drive, like photos etc, thinking that would help but it hasn't. Plus, I've recently installed an extra 1gb power card.
What can I do to avoid having to plug all these peripherals in to access my music?

G drive mini won't mount via firewire 800. usb ok

It hasnt been too long i bought myself a gdrive mini to benefit from the firewire 800 port. It seems that once my macbook gets warm the drive won't mount. It mounts just fine via usb. I've been to the genius bar twice and it worked both times, thats when i noticed it only happens when its warm. I was convinced its a software issue, but i dont know what to think anymore.
Has anyone encounter this issue? Any ideas of whats causing this?
Any help would be greatly appreciated

WAIT WAIT EVERYONE....READ THIS....VERY SIMPLE FIX!
My G mini 750GB drive stopped mounting.....I tried a million methods to get the G mini drive to mount and searched a ton of forums but never found this VERY EASY FIX. Try powering down your computer (imac in my case), then UNPLUG the power supply from the back of the computer....VERY IMPORTANT TO UNPLUG COMPUTER FROM ELECTRIC SOURCE. Nothing else worked for me.
Wait a minute, then plug back in and re-boot....MAGIC - freakin G mini showed up on desk top!
Good Lord why is this simple fix not all over the G mini site?????? It ought to be on the front of the box when you buy this thing! Seems no one at G mini sites talk about this and people are sending drives all over for repair!
Hope this helps!

Hard Drive Ejected - Won't Mount

Hi all,
When booting my computer today, I received an error message that a disc contained unreadable information and was asked to "eject, ignore, or cancel." My second hard drive then didn't appear once I was logged in.
Disk Utility sees the second drive, but clicking on "Mount" does nothing. (The log says "mount succeeded" but nothing happens.)
When using Verify Disk or Repair Disk, I get the following message:
Verifying volume “disk0s3”
Checking HFS Plus volume.
Catalog file entry not found for extent
The volume needs to be repaired.
Volume check failed.
Error: The underlying task reported failure on exit (-9972)
1 volume checked
0 HFS volumes verified
1 volume failed verification
Any ideas???
Thanks!

Sounds like these are your choices,
1: Download Disk Warrior, it's really only good at repairing your directory, it's expensive, it won't repair bad sectors.
and/or
2: Download Data Rescue to get your data off the drive
then
3: Disk Utility erase w/zero option and reformat.
Your drive may be failing or it might be suffereing from a bad sector (erase w/zero re-writes the bad sector map)
I wouldn't trust it and have a backup.
I would do #2 and #3 above, if DW screws up your drive or it fails while your working on it... get your data off first.
Read my tips and pages
http://homepage.mac.com/hogfish/Personal11.html

Lacie external hard drive suddenly won't mount on iMac 27"

Help! My back up Lacie suddenly won't mount. It shows up on my disk utility (but faded) and I tried to repair it with no benefit. I thought it might be a Lion problem, but my other Lacie is working fine. I tried using a different USB cable and unplugging everything, rebooting etc. Any help would be much appreciated.

There may be hardware problem with the drive. However you can try resetting the SMC. Don't be afraid to reset it 2-3x if the first time doesn't work.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

External Hard Drive Enclosure won't mount

Hi
I have a Western Digital Caviar WD3200JD 1TB SATA hard drive inside an external startech enclosure
http://www.startech.com/item-download/SAT3510U2B-35in-USB-to-SATA-External-Hard- Drive-Enclosure-with-One-Button-Backup.aspx
It won't mount on my mac, it won't recognise it in disk utility either
I mounts fine on a PC running Vista. I have formatted it as NTFS but it will still not shoe on my mac
Anything else I can try?
Thanks!

my 12 inch powerbook laptop body was no good, but the hard drive was. I had a powermac g4 tower with a bad harddrive. After researching, I found this site and I mounted the laptop harddrive into the desktop and boom! my old laptop drive booted up on the desktop powermac. here is the link. a 3 yr old can install this it is way too easy, plus it cost 99 Cents. way cheaper than buying an enclosure.
http://www.b2cshop24.com/en/hard-drive-ide-25-to-35-adapter-converter-for-laptop .html

OT (ish): ATTO raid card and Sonnet drive array won't mount

Hi,
It's slightly off topic I think, but the title says it all. My ATTO configuration tool says all is ok and all 8 drives are fine, but Finder doesn't show the drive array (8xdrives as RAID 5). ATTO support have told me how to manually mount the drives via a command line interface, but I'd really like to just turn the computer on and have them there on the desktop(!). While support is thinking about it, I was wondering if anyone had had anything similar and if they felt it was the OS as opposed to the PCI card? I'm running 10.4.11. Other drives (SATA and FW) mount fine.....
Cheers!
Todd.

Complete re-install worked

How do I disable journaling on an external drive that won't mount?

I'm trying to fix a hard drive that gives me the "Invalid content in journal" error. I've run the latest TechTool and Drive Genius and they say the drive is fine, except for its crippling inability to actually mount. Onyx and Cocktail won't touch it until its mounted. Ideas?

It's possible to recover files using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

External Hard Drive Suddenly won't mount except if connected via keyboard

Hi there guys. I have a generic USB 2.0 Hard drive enclosure that I've been using successfully with my Macs. Today it doesn't work, on any of them.
I connect it via USB to the back of my iMac, and it will not mount. I checked system information, and it finds: (under USB)
- USB 2.0 Storage Device
And it knows this:
USB 2.0 Storage Device:
Version: 1.03
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Product ID: 0x5621
Serial Number: 00042222200000157768
Vendor ID: 0x0402
If I plug the hard drive in through my Apple keyboard, it mounts fine, but is SUPER slow, like completely unusable. However in this case, system information says:
USB 2.0 Storage Device:
Capacity: 189.92 GB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk1
Version: 1.03
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
OS9 Drivers: No
Product ID: 0x5621
Serial Number: 00042222200000157768
S.M.A.R.T. status: Not Supported
Vendor ID: 0x0402
Volumes:
Backup Disk:
Capacity: 189.8 GB
Available: 44.78 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /Volumes/Backup Disk
So.. yeah. I've got important data on this drive, and I seriously have no idea what to do. I've read a few forum posts around the web and have seen similar problems but not solutions posted. Can anyone help?
What should I try?
-Brian

One last question have you tried theMac OS X 10.4.10 Combo Update v1.1 (Intel)
Note: What’s New in this Version
The 10.4.10 Update is recommended for PowerPC and Intel-based Mac computers currently running Mac OS X Tiger. This update includes general operating system fixes, as well as specific fixes or compatibility updates for the following applications and technologies:
- RAW camera support
- Mounting and unmounting external USB devices
- Support for 3rd party software applications
- Security updates
17" iMac Intel Core Duo - 2GB Ram - Mac OS X (10.4.10) - Maxtor 300GB FireWire - Creative Inspire 2.1 - 2G Nano

External Hard Drive (160GB) won't mount?!

Hi focus,
I am new in MAC OS and I had some difficult to MOUNT my External HARD Drive in MAC OS TIGER 10.4.10 (all updated).
My MAC simply does not recognized my external HD, but recognize when I am using a Virtual machine (Fusion VMware) and running Windows XP. I already try to format in differents formats, FAT/FAT32/NTFS/EXT2 but nether recognize them.
So I ask, there is some "restriction" to mount external IDE drives? I try to use disk utility or ipartition or SupperDuper and no one recognize automaticly.
My original HD was partioned in 2 parts (by me) one for the system 38 GBs and other one 79 GBs for my musics and documents.
If someone has any ideias why this is happen, please help me to solve this problem. Because I need to backup all my data (no actually bootable stuffs) in this external.
Thanks,

Thanks A Brody,
But how can I format my External HD if my MAC can not recognize, even in disk util or ipartition. I think the partition Magic (for windows) can do that, but can not.
So I think, now, the Mediafour MacDrive can do that, is that real? I am Downloading one version from web and I will try in a second. For me is not a problem format in mac format and read in windows within this software, but the problem is recgnize to format in macformat.
I run windows in virtual machine and now I already Install this Macdrive, but does not work, I can not format my external drive with this software. Well I read more and more discussing foruns and also saw you tube videos about formating in mac and it is not a big deal, its should be easy, first of all if mount my external drive to just starting talking about that stuff.
I will get some other "interface" more modern and try to recognize, if do so, maybe I bougth other USB interface. But for now It is to hard stuff has an external 160GB harddrive to backup stuffs.
Thanks and if some one has other suggestion it is always welcome!

Seagate drive GoflexD won't mount.

Similar Messages

Maybe you are looking for