Seagate driver interferes with boot up

I purchased two Seagate GoFlex 500 Gbs pocket drives and chose to not use the included Disk Application (can't remember its name - a version of formatting and gauge application) since I use Techtool Pro (with E drive) and Diskwarrior to maintain health of all my drives and Disk Utility for Formatting and Repair.
I use these drives with my MacBookPro 2.53 Ghz for iTunes and TimeMachine backup. Ever since I started using them I have noticed long startups. Some of the delay was music fonts, installed at the same time, for Sibelius, other issues were EV_Delete and so on but this "argument" with SeagateDriver and the System keeps featuring - sometimes the issues scrolls on and on - if the drives are attached - this sample is from todays startup without them attached!
I have searched for it with Spotlight and continue to find nothing
21/04/11 6:02:22 PM          kernel          Warning - com.seagate.driver.PowSecDriverCore declares no kernel dependencies; using com.apple.kernel.6.0.
is followed three lines later by
21/04/11 6:02:22 PM          kernel          com_seagate_IOPowSecCore overriding init
21/04/11 6:02:22 PM          kernel          com_seagate_IOPowSecCore overriding init
21/04/11 6:02:22 PM          kernel          com_seagate_IOPowSecCore overriding init
21/04/11 6:02:22 PM          kernel          com_seagate_IOPowSecCore: No ValidUSBVendor found
21/04/11 6:02:22 PM          kernel          com_maxtor_IOPowSec00_10_5: GetVendorAndModelIDInfo failed
21/04/11 6:02:22 PM          kernel          com_seagate_IOPowSecCore overriding init
21/04/11 6:02:22 PM          kernel          com_seagate_IOPowSecCore: No ValidUSBVendor found
21/04/11 6:02:22 PM          kernel          com_seagate_IOPowSec00_10_5: GetVendorAndModelIDInfo failed
21/04/11 6:02:15 PM          com.apple.launchd[1]          *** launchd[1] has started up. ***
Does anyone have ideas about how I might find it and get rid of it?
The MacBook is 10.6.4

Try booting up into Safe Mode, this should stop the seagate drivers from loading to start with and then theres a few things you can try to sort this out, not in any particular order they are:
Check the Login Items by going to Apple -> System prefs -> Account then clicking Login Items, if theres a Seagate application opening try deleting it from login items with the minus.
Try updating your software to the latest Mac OS version ( which is 10.6.7 ) by going Apple -> Software Update
Boot to your install disk and Verify/Repair Disk using the Disk Utility to sort out any file system errors.

Similar Messages

How to restore an external hard drive formatted with boot camp assistant?

Hi,
I was just about to set up boot camp using the assistant and it was makign the disk image on an external drive. I didn't realise I had two drives plugged in and selected the wrong one! I cancelled it as soon as I realised, but it had already reformatted the drive.
Any chance that a recover software will be able to get it back? what do you think?
thanks in advance

hey,
Actually I've just finished running DIsk Drill and have recovered almost everything (500GB worth). The only thing is every file is just numbered with no directory structure (ie. File0000001.jpg, File00000002.mov, etc etc)
so I've got the data, but also about 10000000 files to sort through!

Seagate drives not compatible with Time Machine causing OS lag/hangs?

Setup-
Intel iMac (Early 2006)
Mac OS X 10.5.1
Seagate FreeAgent Pro 750GB External Drive
Reproducible Issues
MacOS X lags at start up with the Seagate drive connected via Firewire and Time Machine enabled.
MacOS X hangs at shutdown with the Seagate drive connected via Firewire and Time Machine enabled. The only way to turn off the iMac is to hold the power button down.
I have contacted both Apple Support and Seagate Support. The outcome with Apple resulted in finding no issues with my iMac. The same can not be said of my 35 minute call with Seagate this morning.
The Seagate rep took me through basic troubleshooting steps and then proclaimed that it was Apple's issue and that Apple had issued a patch for this problem. However, the rep was unable to even provide the name of the patch. The problem with this declaration was the fact that it was based on disabling Time Machine and restarting the iMac once. On the second, fifth and seventh reboot after getting off the phone, the iMac hung on shutdown and lagged on reboot.
To add insult to injury the Seagate rep told me not to use the touch sensitive power button on the Seagate drive, since "it doesn't always work properly." Quoted word for word.
A co-worker of mine uses Time Machine with a LaCie drive on his PowerMac G5 and has had zero issues from day one. At this point in time I'm probably going to wipe the drive and return it to Costco unless someone can suggest an alternative.

Hmmm...bought at costco
I bet it is formated with the Master Boot Record Format. it will mount and OS X will read it, but Time Machine will not be able to use it.
You need to be in finder, under go menu, choose utilities. in folder that opens, double click disk utility. This will open a window that shows all your connected drives. Highlight the seagate drive ( the top choice, thats give the drives storage size). in the top group of buttons in the right side of the application window click the partition button. The Volume scheme will show current. Highlight this and choose 1. to the right of that is a place where you can name the drive. Use only normal letters and numbers here. On the bottom of that window, click the options button, and select GUID. click OK and give it a few minutes. close the disk utility application when it is finished
After it is formatted, the drive should show up on your desktop and Time machine should recognize it.

External Firewire Drive Will Not Boot with 10.5.1

I have a Intel Mac Mini and I tried to install Leopard onto a external Firewire Drive. I have done this with 10.4.11 and all works well. The Mac Mini is running 10.5.1 on it's internal drive. I attached the Ext FW drive 320 GB and formatted it using 'Disk Utility' GUID format. I next installed 10.5.0 on the Ext FW Drive. I can shutdown and reboot with 10.5.0 using the firewire drive as the booting drive. I next installed the 10.5.1 update and when it completes it requests a restart, I restart it and it never boots back up just the Grey-Apple screen.
I have left it sit for a long time in this 'trying-to-boot' mode for a longtime because I know 10.5.1 may restart more than once on initial install. but nothing. I have also tried partitioning the drive into 3 40-80-180GB drives, but still the same behavior.
Any suggestions?

Went through the motions on that. No positive results. I'm starting to suspect either the enclosure or one of the latest updates.
This what I have found to date.
The Enclosure " Vantec NexStar 3" extrenal USB 2.0 and Firewire. Model NST-360UF-BK
The Drive Seagate Barracuda 7200.10 320 GB IDE Drive
I tried 10.5.0 on an Intel Mac Mini. (GUID format) It boots ok. Install 10.5.1 manually downloaded or automatic it will install the update but will no reboot.
(this part I have to verify a second time) tried the same enclosure on a G4 . I attached the drive formatted it for a PowerPC install and boot. Installed 10.4.10 but not the latest security updates, JAVA, and QT. It will boot ok from the external FW drive. I next install the latest Updates via the update app in the Systems Preference window. After doing the updates for 10.4.10 it will not boot.
So I'm suspecting either the enclosure or the latest updates

Trying to install vista 64 on a separate internal drive with boot camp

running into a wall here,
I'm able to install vista x64 when I divide an internal OS X drive that works fine, but I want to load Vista on it's own entire internal disk (bay 4). Bays 1,2, and 3 I use for OS X they are all 1TB drives. When I go through the boot camp assistant and divide a disk 50/50 between OSX and Windows and then boot to the vista install disk, the vista setup screen shows a PARTITION as "disk x partition x BOOT CAMP" and it works to select that partition, format and load windows... No problem. However when you choose the option in Boot Camp to erase an entire extra disk (in my case bay 4) and create a single partition for Windows and then boot to the Vista install disk the disk that was erased of the mac formatting, it doesn't show up with "BOOT CAMP" in the name inside the Vista setup screen, nor will it let you install vista to it, even if you pick the right one and format it inside Vista setup.
I've tried removing all internal disks except the one I want to load vista on and booting directly to the vista set up disc, and formatting with windows command line diskpart inside setup too, unsuccessfully. It simply keeps giving me messages that windows cannot be installed on the volume... I changed it from a GPU type disc using the "clean" command in diskpart but it still won't work! Man!!!
How can I get vista loaded on a separate disk on my mac, boot camp or not? It seems silly that a disk must have an OS X partiton on it before windows will load on it... Is there a way to load Vista x64 on it's own dedicated internal disk? Gratitude for any real help, I'm positive I'm not the first guy to want to load vista on it's own disk LOL!

So I figured this out myself, there was some kind of glitch in boot camp, i bypassed it and formatted the disk with the os x disk utility as a fat 32. pulled all the other drives out, and booted to vista setup. it formatted the disk to NTFS and lets me install vista 64 yahhhooooooooooooo!!!!!

Installing Windows 7 with boot camp as whole partition on 2nd internal hard drive

Hi all,
I am unsure what is the recent changes with Apple boot camp. But when I used boot camp utilitiy on my Mac Pro (Mid 2010) to install windows 7 64 bits. It would not install and created a whole lot of problems.
After I initialise the process to install windows 7 using boot camp utilities, I chose the option to create a single partition to installl windows 7 on my secondary internal hard drive (1TB). After I restarted my Mac Pro and started the Windows 7 installation process, I was unable to install Windows 7 on the BOOTCAMP partition created by the boot camp utilitiy. I got an error something about Windows cannot be installed on the selected forum because the driver contained GPT details.
I tried to format the BOOTCAMP partition, but it ended up with errors. I tried to delete and recreate the BOOTCAMP partition in Windows setup, but failed with errors again. As I could not go any further with the Windows 7 installation, I had to hard reset my Mac Pro and tried to reboot back into Mac OS X Lion and that's when the nightmare begin.
Not only I could not boot into OS X, I could not use any of the startup key combinations (i.e. Hold option key to select start up disk, option + R to boot the lion recovery drive, not boot from any external firewire drive installed with OS X Lion). Basically none of the key combinations worked except for the holdingi F12 and mouse key to eject CD.
The only thing I could boot the Mac Pro with is the windows installation CD and Linux Ubuntu Raring Distro. I can install the ubuntu distro without any issue. However, I could not boot my mac pro back into OS X as Linux does not support bootcamp. The only way I could use Mac OS X Lion again is to delete the partition OS X Lion was installed on, and then I was be able to install Windows 7 without any issue.
After installing windows 7 I would have to download boot camp and then use the boot camp control panel to restart in the Mac Pro installation DVD and I will have to reinstall OS X again. After installing OS X, I went to System Preference and tried to select Windows 7 as startup disc. But I failed to as it says "Windows 7" Was installed via another utility. I would have to erase the partition and reinstall Windows 7 again using bootcamp utility. If I try to install windows 7 again, the horror I described above repeats again.
From my understanding, the Boot camp utility creates a new EFI bootrom with Master Boot Record (MBR) in FAT32 format. Therefore I could not boot back into Mac OS X without using boot camp in windows 7 as none of the boot combinations key worked.
I want to ask if anyone is experiencing the same issue as i do, and if there are any solutions to the problem I am experiencing. I never had such issue before. I was able to install Windows 7 on my 2ndary internal hard drive without issue using boot camp. I don't what has changed. I have googled for solution, I only found something related to XOM but nothing else.
If anyone can provide me with any help in regards to installing Windows 7 as a whole partition on a secondary internal hard drive. It'd be grealy appreciated. Thank you in advance.

If you have driver issue, just pre-download the boot camp drivers and save them on an external drive or burn them onto a cd, you will be able to load drivers via the advanced installation option during windows setup, that is if your osx partition isn't actively preventing you from installing win7 on the BOOTCAMP Partition created by boot camp assistant, I find this rather ironic, took me 3 days to figure out this issue, I was stuck without being able to boot into anything beside the windows cd, which wasn't even helpful as I could not install windows as I did not want to delete my osx partition. I lost all my data becsuse of it, as I had no idea what was going on. I tried to recover the partition using testdisk, hfsprogs and gparted in ubuntu life cd but they dont support HFS+. As I could not access osx terminal (couldn't even boot into osx installation dvd with that dreaded MBR created by boot csmp). I could not use pdisk in terminal to restore the osx partition map. Though luck for me. Called applecare and they had no idea what the problem was, and as usual they orgsnised for hard drive replacement. But it was clearly a software issue.
They will have to fix bay2 for me as I can no longer detect any hard disk connected to that bay.

Can I install Windows on my iMac 27, 3TB Fusion Drive, late-2012 with Boot Camp 5?

Hello. When I first opened the Boot Camp Assistant app, it said it could not work with the 3TB fusion drive. With the updated version of Boot Camp, the option to install Windows appeared. I tried to install Windows 8, but the loading bar stopped moving. I waited for hours, but it still did not move. I decided to quit the app, and re-open it, in order to try again. It crashed, and would not open. So I restarted my system and when I did that I noticed that I had about 1GB or so left of storage. This shocked me, because the disk was just suddenly filled for some reason. In hopes of fixing this I used an app called 'CleanMyMac' to try and recover the disk space. And as I thought the disk space returned to normal. However when I went to Disk Utility and clicked 'repair disk' it said this...
There is only 1 partition, so the Boot Camp process did fail.
I don't know whats wrong with my system though? I would like to install Windows, but I'm worried that I might recieve errors again. I have not got Apple Care, but I'm playing on buying it soon, due to it being almost a year since I bought the system.
Maybe I did something wrong when trying to install Windows with Boot Camp? I don't know, but if possible can someone please tell me if I can install Windows and if something is wrong with my system.
Here is some additional screen shots of the type of system I have.
Thank you for your help with this issue!

Which copy or version of Windows? and how where was it purchased?
my window installed itself perfectly on another computer.
One copy and you want to activate on two computers?
With 16GB, it will try to create 16GB hibernation file, 24GB page file, and need 20-30GB for the OS, plus room for temp, cache, applications, 9GB just temp to install SP1 update(s).
did you create 80GB or larger partition?
also, some macs with ssd + hard drive have issues, and of course you need Windows 7 64-bit home premium (Pro to use more).
OWC has up to 32GB, not cheap.
http://eshop.macsales.com/shop/memory/iMac/2010/DDR3_21.5_27
Crucial is usally very helpful, try email cs.

I have a mac book pro with Boot Camp that also runs windows. I upgraded to Lion and somehow it crashes the mac side peridoically. I am told I need to "clean" it and reinstall lion using the recovery drive. will that delete the windows partition too??

I have a mac book pro with Boot Camp that also runs windows. I upgraded to Lion and now the mac side crashes/freezes periodically, especially iphoto. I am told by the genius' that I probably need to "clean" it and reinstall lion using the "recovery drive" which resets everything back to default and reinstalls the lion operating system. My question is will this also delete the "windows" partition drive and all that data too. If so that will be a huge pain in the ___ to back up and reinstall boot camp and windows. I want to shoot the lion.

There is no system like Acronis for the Mac platform. You can try using the buiilt in Disk Utility to create an Image of the complete Mac drive but I have found that this does not work very well as on tryiing to restore it gives errors sometimes.
You can use SuperDuper or Carbon Copy Cloner to create a bootable Clone of your system partition. But that is only for the System partition and not the complete drive.
If you use Boot Camp to install Windows on your Mac neither of those two programs will clone the Windows side.
Neither will Disk utility as Mac's can not create or write to a NTFS partition. So some other program is need for that.

Boot Camp with Win 8 Can't See The USB External Drive [MBR with NTFS, Fat32, HFS Partitions]

Hi. When I boot to Boot Camp with the latest Apple Windows Support drivers can't see my USB Flash Drive, DVD and OS X volumes but not my USB external drive that has an MBR partition scheme (using iPartition from GUID) and in there it has different volumes [HFS when I boot to Snow Leopard, Fat32, NTFS]. What can I do with Boot Camp to make it see my USB external drive and why isn't it seeing the USB when it can see the USB flash drive both use USB?
Thank you in advance.
God bless.

Buy Paragon NTFS for OS X $20.

ATI display driver lost with Linux and XP dual boot os

I brought ThinkPad W500 with windows vista. I want to get rid of the hidden boot system reserved partition and downgrade to windows xp and install OpenSuse os. Following some sourses found on the web, I first set the bios sata ahci mode to compatable mode. Then install windows xp and update the sata driver. Restart and reset the bios sata back to ahci mode. It works fine with windows xp and I install back all driver. Finally I install OpenSuse and create dual boot with Grub.
But a serious problem come up with me. Everytime after restart from the linux os and back to windows xp, xp doesn't regonize the ATI display divice and tell me no driver installed with low screen resolution. And I have to restart the machine and boot direct into xp for the second time and the problem gone. But it is so annoying of doing this everytime. Anyone can help? Many thanks.
Solved!
Go to Solution.

Hi stanleyimko,
I don't have an answer, just a couple of questions:
Does your W500 have switchable graphics? If so, you may have to turn off "let the OS detect" or permanently select one or the other in BIOS. XP isn't switchable aware, so I don't know why that would make a difference.
Do you see the problem on cold (re) boot to XP, or only on warm reboot from Linux to XP?
Seems like something is leaving your BIOS in an odd state (I guess that's obvious) and maybe a cold reboot would sort it.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Having issue with GoFlex Seagate Driver Setting, Its always asking for the installation process whenever I am turning on my mac, any help will be appreciated.

Hi Team,
Unfortunatly, I plugged-in one of my friends external hard drive, and its asked me for the seagate driver instalation, after that every time when I am turning on my system, its asking for the goFlex software instalation process.
I tried out some process by googleing, I tried to remove the complete segate from my system, still it didn't help me.
Please help me with, to remove a complete segate package.
Thanks,
Jayaram.

Thanks Richard.
The 3 point did help me, now its not all asking for the each time instalation for the same driver.
Here one question comes to my mind, by deleting the content of the temp folder for the segate and removing all the releated files from the application, library->application support, library->extension, library->LaunchAgents, I deleted all the releated files of segate, could you please let me know if I need to delete from any more location to avoid the garbage files.
Thanks for your time and help

Problems installing Windows 7 with boot camp, cant find the cd/dvd driver...

I´m having some problems installing Windows 7 on my new 12,1 (21,5) iMac with boot camp. When the computer restarts and the Windows 7 setup begins, i get the message that the cd/dvd driver cant be found, so i can't continue the installation. I've tried searching online for the driver, but can't find it. The cd/dvd seems to be a OPTIARC cd/dvd ad-5690h, which seems to be produced by Sony. I have a authentic windows 7. I even tried loading everything ver to a usb-drive, but then it wont boot.

After reading around on this, and other forums I tried to burn a new dvd at reduced speed(2x), but that did'nt work either... I have an authentic windows 7 iso, downloaded with serial, is there any way to boot this from a jump drive or external hdd?

Hi, never used support before - here goes! My Mac G4 MDD no longer shows the start up hard drive icon. The one with all my files on! It shows the other 3 hard drive icons and boots up OK. Has my start up hard drive failed? Can it be fixed? Thanks.

Hi, never used support before - here goes!
My Mac G4 MDD no longer shows the start up hard drive icon. The one with all my files on!
It shows the other 3 hard drive icons and boots up OK.
Has my start up hard drive failed? Can it be fixed?
Thanks.
Machine Name: Power Mac G4
Machine Model: PowerMac3,6
CPU Type: PowerPC G4 (3.2)
Number Of CPUs: 2
CPU Speed: 1.25 GHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 1 MB
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.5.7f1

Doesn't sound like any hard drive failure to me - more a Finder preference.
Finder -> Preferences -> General -> Show these items on the desktop -> Hard disks
The startup disk is sometimes treated differently from other disks (such as external and network disks) and I'm guessing this is a simple preference setting, although I might be wrong.

Booting a Hard Drive (loaded with Win XP) from startup [SOLVED]

I have a hard drive that I have installed Windows XP on using UNetbootin.
However, when I turn on my computer and see the GRUB BIOS menu where I can select an OS, I don't see Windows XP or anything related to the hard drive.
How do I get the hard drive to be recognized by the BIOS so that I can run XP from the GRUB menu?
I have reformatted the hard drive using fdisk, setting the filesystem type to FAT32 (for Windows XP),
created the filesystem with mkfs, and made sure it mounted on startup with fsck:
fdisk /dev/sdb
mkfs -t vfat /dev/sdb1
fsck -f -y /dev/sdb1
Then, I used UnetBootin setting the iso image to an old XP iso I've had, and setting the drive to /dev/sdb1
What am I forgetting or doing wrong here?
Last edited by Tycon712 (2011-03-30 03:08:43)

Sorry about the confusion. What I meant was the startup menu (after you power the comp on) where you can select the different OS's. The iso is probably an installation iso, so I guess this puts the whole being able to boot from the hard drive at a halt.
I have edited the /boot/grub/menu.lst file to:
# (2) Windows
title Windows
rootnoverify (hd1,0)
makeactive
chainloader +1
Which made it bootable, but since the iso that I thought would work, isn't going to work, its not going to boot from the startup menu.
I've searched quite a bit on how I should go about making my external hard drive able to boot XP from the startup menu, but I must be dumb, because I can't find a simple guide online to do this. Could you guys point me in the right direction or give me pointers on how to make the external hard drive bootable with XP? Sorry if this annoys you; I hate asking people questions when there probably has already been a forum post on the subject.

Can I make an additional hard drive partition with a boot camp partition on my mac?

Hi.
I have installed boot camp and now I want another partition for a second install of Mavericks. Can I make another partition for this without messing up Windows 8.1?

Is it dangerous to use an external HD to boot from? The guy at Circuit City told me it was.
One danger of using an external hard drive as a boot drive, is the connection is not as reliable as an internal hard drive. The other is the mistaken assumption that just because it is separate, or not part of the computer, that it is safe. The only true safety comes in numbers. You should always backup your data*:
http://www.macmaps.com/backup.html
2.5" hard drives are a little less reliable than 3.5" hard drives because of the smaller parts involved. Mac Minis have 2.5" hard drives, whereas other desktop Macs have 3.5" hard drives. Whether the reliability of Firewire or USB over SATA or Parallel ATA on 2.5" is enough to offset this difference is hard to say. Having enough backups ensures you don't have to be surprised when you find out in your situation.
- * Links to my pages may give me compensation.

Seagate driver interferes with boot up

Similar Messages

Maybe you are looking for