Seagate External Hard Drive with Imac - How to connect 2nd Firewire Device

I just bought a new Seagate External Free Agent HD to use with my IMac on a Firewire 400 but was wondering if I keep the HD connected what can I do to connect another device (video camera) at the same time with another firewire? I thought my IMac had 2 Firewire ports but it looks the 2nd port is for something else. Is there some kind of Hub I could buy or could I connect the camera through the HD, it appears there is another Firewire connection there? Thanks and any advice would be helpful?
Message was edited by: 27993buck

Any reputable brand name should do the job.
Here's one: http://catalog.belkin.com/IWCatProductPage.process?Product_Id=193393
A Google search will turn up loads more.

Similar Messages

  • Seagate Ex-HD with IMac - How to connect 2nd Firewire Device

    I just bought a new Seagate ExternalFree Agent HD to use with my IMac on a Firewire 400 but was wondering if I keep the HD connected what can I do to connect another device (video camera) at the same time with another firewire? I thought my IMac had 2 Firewire ports but it looks the 2nd port is for something else. Is there some kind of Hub I could buy or could I connect the camera through the HD, it appears there is another Firewire connection there? Thanks and any advice would be helpful?
    Message was edited by: 27993buck

    If yours is an early through late iMac G4 LCD flat panel computer
    which shipped between 2002 and 2004, they all have the same
    number of FireWire ports: 2 - 400 MBit/s (8W total power.)
    You may need to look into a FireWire Hub, one that is self-powered
    from an external AC power adapter and not use limited FW port
    power from the computer, as that is limited.
    ' firewire hub, powered ' - google search:
    http://www.google.com/search?hl=en&q=firewirehub+powered&aq=3&oq=FireWirehub
    {If you have a different configuration of iMac than the one with
    the half-dome white base & chrome display arm, you may need
    to compare your machine with either the iMac G5 or Intel iMac
    forum areas, since the hardware did change over the years.}
    Be sure to not overload the FireWire, or other ports on the Mac;
    no matter which model or version you may have. In the case
    of USB, a self-powered (uses AC adapter) hub is recommended
    and in the case of FireWire, some products may have a port in
    them, but to daisy-chain these is a mistake. Underpowered
    device issues, or overtaxing the Mac power supply may result.
    An external firewire enclosed hard disk drive with accessory FW
    port may have been supplied with that port given extra power;
    if the FireWire drive uses an AC power supply and not port power.
    If the external FW drive is in heavy use, you may be able to tell
    if the port on there can support a camera. It probably won't.
    By the Mid-2007 Intel iMac, there was a difference in the FW
    port configuration: 1 - 400 MBit/s, & 1 - 800 MBit/s (7W each.)
    So, you may have an iMac with two different FireWire ports.
    Some towers also have or had support for both FW types;
    and Ethernet, USB ported devices, and audio options.
    For those machines with a less than desired FireWire
    support, there are FireWire Hubs, in both specifications;
    and retailers or online store links show them in both
    Mac and more general PC listings. These would be
    self-powered Hubs and not rely on the Mac port power.
    These are a bit different and not all peripherals that say they
    may work with one or the other will necessarily do so in both.
    An example maybe if you buy a FW 800 external HD enclosure
    and it says it also supports FW400. It may not boot OSX in 800.
    The computer specifications should be available in Apple Support
    in that section; and a current version of the MacTracker download
    database of most things Apple computer should; see: mactracker.ca
    In any event...
    Good luck & happy computing!

  • I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable.  I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

    I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable.  I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

    Download the supplemental fix to 10.7.5 
    http://support.apple.com/kb/DL1599

  • I have a seagate external hard drive with files copied from windows pc. If I will download NTFS driver from seagate to my mac, could I install it safely without harming my files in the external hard drive? I am afraid I may erase all files in there.

    I have a seagate external hard drive with files transferred from my windows pc. If I will download NTFS Driver from seagate to my mac, could I install it safely without harming my files? I am afraid.. I might erase all my important files during the installation..

    Thanks a lot! I have already downloaded Paragon Driver and it works well with seagate external hard drive. I am copying as of now my important files from my mac to it. However, I have only the trial version which will expire in 10 days. I don't have credit card to buy for it.

  • How do I use a seagate external hard drive with airport extreme?

    I have a 1tb Seagate external hard drive and I connected it to the USB port at the back of my Airport Extreme. I opened Airport Utility and am now lost. How do I access the hard drive?
    (I have a Macbook Pro running os x version 10.8.2)

    The external hard drive must be formatted either in Apple's HFS+ or in Microsofts FAT32 in order for it to be recognized. You can format the drive by connecting it to your Mac and bringing up "Disk Utility".

  • Can I share an external hard drive and simultaneously have it connected via firewire to my iMac?

    Trying to get an external hard drive that is connected to my Airport Extreme to also be connected to my iMac via firewire 800. Any ideas?

    That shouldn't be attempted. Unless the drive is specifically designed for it, which very few drives are, connecting it to more than one computer(which includes the base station for this purpose) at any given time through USB or FireWire can damage it.
    (69639)

  • Using Seagate External Hard Drive with both PC and Mac

    So I bought this hard drive knowing that it can be used back and forth between Macs and PCs.  I currently have a PC, but it's pretty old and I figure I will be getting a Mac after it dies.  But currently I want to use it to get files from a Mac computer and when I connect it, it says "read only".  How do I configure it to be able to transfer files with a Mac?
    Seagate - FreeAgent GoFlex 1.5TB External USB 2.0/3.0 Portable Hard Drive - Black

    Here you go:
    http://hints.macworld.com/article.php?story=200909​13140023382
    If you find my post useful or informative, please click the icon below with the plus sign and star to give kudos. Thank you!

  • Seagate external hard drive

    I just bought a seagate external hard drive with 1 terrabyte and when I first plugged it into my macbook it said 'the disk was not readable by this computer'. I want to know does thois mean my drive is broken and how do I use my drive like a usb? I am new to this and need to know if it is broken and How to use it like a normal usb I would just plug into my mac

    Try partitioning and erasing it.
      Run Disk Utility.
      Plug in the drive you are about to erase.
              Select that volume. (The one that  is NOT your system disk.)
              Click on Partition.
              Pull down under Partition Layout to 1 Partition.
              Click on Options…
              Select GUID Partition Table.
              Name: Emergency Backup
              Format: Select Mac OS Extended (journaled)
              Click Apply.

  • I made a bootable disc on an external hard drive, with Yosemite on it.  I am running Snow Leopard on my iMac.  How can I open the Yosemite disc from the desktop on my iMac?  Does the external hard drive need to be connected to my iMac by firewire to

    I made a bootable disc on an external hard drive, with Yosemite on it.  I am running Snow Leopard on my iMac.  How can I open the Yosemite disc from the desktop on my iMac?  Does the external hard drive need to be connected to my iMac by firewire to do that?

    kahjot wrote:
    Snow Leopard's Startup Disk pref can’t see Yosemite volumes. So the only way to switch from Snow Leopard to Yosemite is to do what Niel mentioned. Doesn't matter whether it's connected by USB or Firewire, although performance via FW would be faster.
    Are you saying that Yos/10.10, as a volume located in a mounted external drive won't appear as an option in Snow Leopard's Startup Disc, in Sys Prefs? I've never heard this one before. AFAIK any mounted volume, regardless of OS, should appear there. I would think that, if it appears in the Boot Picker/Startup Manager it would also appear and could be booted to from Snow's Startup Disk. I can't test this myself, since I don't have Yos. Is what you are saying documented somewhere?

  • How do I find outlook email on an Seagate external hard drive?

    Hi -
    I have a Seagate external hard drive that I used to back up an old mac book pro.  I have found all my documents and was able to transfer them all to a mac  mini.  However I can not find the email files.  I had outlook and am trying to find the emails that were backed up on the external hard drive.  How can I find them?
    thank you!

    If it is anything like Entourage was before it, it is in the Microsoft User Data folder in the Documents folder. Sadly with Entourage, there was a single Database file that managed contacts, e-mail and calendar in one file.  This all your eggs in one basket approach led me to stop using Microsoft's solution.  Hopefully Outlook was made less risky.

  • I'm currently backing up using Time Machine and a Seagate external hard drive, how to do I restore on a new computer?

    I hate to say it.. But I have never backed up!! I have thousands of pics of my son on this mac book, it got wet and NOW I'm backing up (as i type) to a Seagate external hard drive-  I plugged it in, and then Time MAchine launched automatically.  It looks like it's backing up my whole computer, is it backing up everything?  photos, address book, documents etc?  If my computer crashes tomorrow, how would I restore all of this information on a new computer?
    Help, I'm computer iliterate- hence the reason I got a Mac (so easy to use).  I need reasurance that it will back up!  How do I continue to back up?  Leave the external hard drive plugged in?  I'm telling you I'm below the knowledge of "Backing Up a Mac for Dummies"

    Time Machine makes a backup of the whole OS.X volume automatically, so you will have an exact copy of your hard disk in your Time Machine external disk. Also, Time Machine will make backups every hour, always that your Time Machine disk is connected. If you want more information, visit this site > http://pondini.org
    To restore this in a new Mac, you have to use Migration Assistant. Just connect the Time Machine drive into the new computer, open Migration Assistant (it's in /Applications/Utilities) and follow the steps. You will be able to select what you want to transfer.
    Also, if you have a brand-new Mac, you can do this during the initial setup. Setup Assistant will ask you to restore a backup, so connect the Time Machine disk and follow the steps

  • How do you back up an external hard drive with time capsule?

    how do you back up an external hard drive with time capsule?

    Will time capsule back up the machine and the hard drive that is plugged into the machine?
    Yes, if the hard drive with the video files is formatted correctly for Mac
    On the Mac with the hard drive connected....click on the Time Machine "clock" icon at the top of the screen
    Click Time Machine Preferences
    Click Options
    Here you will see a list of items that have been excluded from backups
    Click the name of the hard drive to highlight it
    Click the - (minus) button at the bottom of the list to remove the hard drive from the list of excluded items
    The hard drive will now be backed up with your Mac on the next pass that Time Machine makes

  • My Seagate external Hard drive is saying that it is damaged I have another hard drive to transfer everything to but how do I fix this one?

    My Seagate external Hard drive is saying that it is damaged I have another hard drive to transfer everything to but how do I fix this one?

    You may not be able to fix it.
    Some data recovery tools are non-destructive in their data recovery methods:
    https://discussions.apple.com/docs/DOC-1689

  • I have an external hard drive with numerous WMA files that I would like to download to iTunes. How do I do this on my MAC?

    I have an external hard drive with numerous WMA files that I would like to download to iTunes. How do I do  this on my MAC?

    You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
    http://www.macupdate.com/app/mac/24481/ntfs-3g
    If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

  • How do I share an external hard drive with 3 macs

    On my gmac, I have an external hard drive that all my itunes music/videos are being saved to. I would like to give the other macs access to the itunes music but can not seem to network it. I have no problem logging on to any of the three computers and sharing/using folders from each mac but I can not get the other two computers to see my external hard drive. I tried using SharePoints but the issue seems to be that the external hard drive shows up at the "computer" level, whereas the networking shows up at the internal hard drive level. I've searched all over the boards but can't seem to find anything that helps me with this particular situation. I am using a SeaGate external hard drive that is formated as FAT32.

    Highlight the Share in Sharepoints>Normal Shares tab. Look down & right for the Windows (SMB) sharing and change it Shared(+). Click Update Share, Share should now show a + under SMB & AFS. Click the Little Show File System Properties button, set users & group, Permission, etc.,Update Share.
    That's the basics.

Maybe you are looking for