Seagate hardrive no longer shows up on my desktop in Lion

I have a Seagate 500gb Freeagent hadrdive and recently upgraded to Lion, it no longer shows up on the desktop but does show up in disk utility. Tried a new WD hard drive and that one works fine. Anyone had similar problems or found work arounds?

See my tip on how to eject discs, as it also explains how to ensure removable drives are visible:
https://discussions.apple.com/docs/DOC-1015
If none of those make it visible, if it is connected via USB, see if booting in safe mode makes it visible.
That means holding the shift key.
Double check that Spotlight isn't trying to index it as well.  If the drive appears in Spotlight outside of the Privacy section of Apple menu -> System Preferences -> Spotlight, add it there, as that prevents Spotlight's index from slowing your access to the drive.
If you can't get it in Spotlight since it is invisible, it is possible the drive needs a new firmware to be Lion compatible.  Check with the manufacturer.

Similar Messages

  • Why do my external hard drives no longer show up on my desktop?

    I have three external harddrives all of which are connected through different ports, all show up in finder, all show up in disk utility, but none of them will show up on my desktop. I looked at a few other posts similar to mine but the answers given to other problems have not worked. There is no way all three of my cords are causing a connection problem and I have repaired and verifyd all the drives and still nothing. Any ideas?

    Are the disks self powered? Try a SMC Reset:
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    The 5 second timing is important to a successful reset.

  • 3G no longer shows up on desktop, spinning beach ball on iTunes launch

    After playing with my new 3G all day, which included several successful syncs with iTunes, the iPhone no longer shows up on the desktop. iTunes launches automatically but just sits there with the spinning beach ball. Have to Force Quit. The iPhone also no longer displays Sync In Progress. Repaired Permissions, restarted, tried various combinations of plugging/unplugging the iPhone with no success. Any ideas?

    I am having this problem too, but I just leave it plugged in and eventually it pops up. It has taken up to 3 minutes.
    How long have you given it?

  • External hard drive no longer shows up connected

    I have been using a Seagate Freeagent 500 GB external HD as a backup storage device for my Windows 7, 64 bit computer. After working well for several years it did not respond the last time I tried to back up and shows up as "disconnected" when
    I search for the HD in device manager or control panel.  It was assigned Drive I but that drive no longer shows up under drives.  I have tried different USB ports without success. Oddly, the audible signal sounds when I remove the USB cable from
    a port but does not sound when I reinsert it.  I also tried powering down the hard drive and powering up again without success.

    Hi,
    If other PCs can show this external hard drive, You can try the following steps to clear the write-protected flag to see what's going on:
    Open a command with administrator privilege:
    type--> diskpart
    type--> list volume
    type--> select volume #
    type--> attributes disk clear readonly
    Kate Li
    TechNet Community Support

  • XP no longer shows up as a startup disk

    After upgrading to leopard today, my XP partition no longer shows up as a startup disk.
    I had/have my windows partition on it's own drive that was NOT created with bootcamp. I pulled my osx disk from the my mac pro and installed windows on the disk i had in bay 2 using 100% of the disk (ntfs). after installing the bootcamp windows drivers, i reinserted the osx disk and all has been well for the last 4 months,... until the upgrade today that is.
    Now, when i go to the 'Startup Disk' preference Windows is no longer an option. the disk still shows up in Finder and I can navigate around the file system.
    Anyone have any ideas on how I can get it to show up again? I'd really rather not have to reinstall if i can avoid it.
    thx.

    I have exactly the same problem (well, maybe).
    I have installed MacFUSE and ntfs-3g. I don't know if this is of any relevance, because I don't know if it was working directly before I installed them.
    I have my OS X and NTFS volumes on the same physical disk. I also had to install Windows twice because I buggered it up the first time (formatted the partition as FAT32 and ran into a bunch of disk errors).
    I also notice that in WinClone I have 2 Untitled Volumes at /dev/disk0s3 and /dev/disk1s1. /dev/disk0s3 seems to be the legit Windows NTFS partition, but I have no idea what /dev/disk1s1 is about. I don't know if it's been there all along or not but perhaps it is confusing matters and stopping the legit Windows volume/installation from being detected...? Should that second volume exist at all? It doesn't exist according to the Disk util.
    edit: I used fdisk just to have a look at the two untitled partitions.
    Jacbook:dev jacteh$ sudo fdisk /dev/disk0s3
    Disk: /dev/disk0s3 geometry: 10651/255/63 [171117408 sectors]
    Signature: 0xAA55
    Starting Ending
    #: id cyl hd sec - cyl hd sec [ start - size]
    1: 72 368 111 45 - 371 101 51 [ 218129509 - 1701990410] <Unknown ID>
    2: 74 67 115 32 - 299 114 44 [ 729050177 - 543974724] <Unknown ID>
    3: 65 114 111 32 - 353 115 52 [ 168653938 - 0] Netware 3.xx
    4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
    Jacbook:dev jacteh$ sudo fdisk /dev/disk1s1
    Disk: /dev/disk1s1 geometry: 0/4/63 [63 sectors]
    Signature: 0x0
    Starting Ending
    #: id cyl hd sec - cyl hd sec [ start - size]
    1: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
    2: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
    3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
    4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
    I can hold the option key upon startup and manually enter Windows like that, but I'd prefer to be able to restart and boot Windows without having to hold a key.
    Apart from not seeing the Windows boot volume in the system prefs pane, Boot Camp (and the rest of Leopard) has been excellent. I am impressed at the level of apple hardware support for windows. It seems to be much better than most native PC hardware.
    I am dying for an answer. It's a fairly minor problem in the grand scheme of things, but **** it's frustrating.
    Message was edited by: jacteh

  • Windows Partition No Longer Shows Up After Accidental Premature Closing of Camptune

    Mac OS X 10.7.5
    I was running Paragon Camptune to expand my Windows 7 partition. The progress bar reached the end and stayed there for about 30 minutes. The Camptune window was then accidentally closed and Camptune quit itself. I restarted the computer but the Windows partition no longer shows up when I try to boot it, only Mac OSX and Recovery Disk. The Bootcamp drive is no longer accessable from System Preferences, and the Bootcamp partition folder is no longer accessable in the Devices area of Finder. Camptune no loner recognizes that there was a partition. Thus, I am no longer able to access the partition's contents or delete it and make a new one.
    It would be preferable if I could fix the partition and have it accessable again, however I have no problem with deleting it and making a new partition. Any advice? Thanks for your time.
    Here is the information from the Partition Inspector:
    *** Report for internal hard disk ***
    Current GPT partition table:
    #      Start LBA      End LBA  Type
    1             40       409639  EFI System (FAT)
    2         409640   1151635239  Mac OS X HFS+
    3     1151635456   1152904991  Mac OS X Boot
    Current MBR partition table:
    # A    Start LBA      End LBA  Type
    1              1       409639  ee  EFI Protective
    2         409640   1151635239  af  Mac OS X HFS+
    3     1151635456   1152904991  ab  Mac OS X Boot
    MBR contents:
    Boot Code: Unknown, but bootable
    Partition at LBA 40:
    Boot Code: None (Non-system disk message)
    File System: FAT32
    Listed in GPT as partition 1, type EFI System (FAT)
    Partition at LBA 409640:
    Boot Code: None
    File System: HFS Extended (HFS+)
    Listed in GPT as partition 2, type Mac OS X HFS+
    Listed in MBR as partition 2, type af  Mac OS X HFS+
    Partition at LBA 1151635456:
    Boot Code: None
    File System: HFS Extended (HFS+)
    Listed in GPT as partition 3, type Mac OS X Boot
    Listed in MBR as partition 3, type ab  Mac OS X Boot

    Hi Eric,
    Bootcamp does show up in the disk utility but it is grey instead of black like the Macintosh HD.
    The following information is available:
    Mount Point: Not mounted
    Format: Windows NT File System (NTFS)
    Owners Enabled: -
    Number of Folders: -
    Capacity:  274.55 GB
    Available: -
    Used: -
    Number of Files: -
    What might be the best way to continue to repair it. I do not have the option to click on "verify disk permissions" or "Repair Disk Permissions".
    Should I clone the hard drive in the target disk mode??
    I'm not the best at this stuff so any more advice would be greatly appreciated!
    Thanks!

  • IPod Touch no longer showing up under My Computer

    My iPod Touch is no longer showing in the device list under My Computer and as such can't access it to get my photos off it.
    It works in iTunes just fine, syncs fine, etc.
    If I go to Devices and Printers, it used to be listed under the Devices category as iPod, but now shows under the Unspecified category as Apple Mobile Device USB Driver, so basically a generic device.
    I have no devices with exclamation points or any other trouble signs under Device Manager.
    Help?

    Well, I am not entirely sure what exactly happened but after trying numerous times to reinstall the drivers and getting all sorts of error messages, I finally got Windows 7 to cooperate. The iPod Touch now shows up and is being detected as a digital camera under Devices, and under Computer it is showing up under Portable Devices. If I double-click on it I can view my pictures, transfer them, delete them, etc.

  • Status page in X3000 no longer showing any data.

    Using the latest 1.0.05 firmware on X3000
    Status page perpetually shows "Connecting" even though I'm connected.
    It no longer shows data such as the Internet IP address, Gateway etc.
    Only DNS IP addresses are shown.

    Hi, 
    Try to turn off your X3000 for around 60secs then check again. If it's doing the same issue after doing a powercycle, you may have to perform a hard reset then reconfigure your router.
    If everyone needs to believe in something, I believe I'll have another beer..

  • Ipad app store no longer shows updates

    ipad app store no longer shows updates. was working fine until a couple days ago - whwt can I do?

    If you are getting the blank app update screen, many people are having this problem over the last couple of days.
    According to Fly150 in another discussion, this will work.
    If you want to update the Apps while waiting for Apple to fix Updates:
    1. Go to App Store
    2. Select Purchased
    3. Select All
    4. Scroll down to find the Apps showing update
    5. Select update on the Apps
    This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then.

  • My MacBook Pro no longer shows up on my devices how do I add it back

    Hi,
    My MacBookPro no longer shows up on my devices that is associated with my AppleId. Any suggestions? I did go to ITunes and follow the instructions on how to add and delete but it is not giving me the option to add.  Just had new hard drive installed and restored from time capsule without any other issues.
    Operating system is 10.9.4., Processor 2.7 Ghz Intel Core 17, Memory 16 GB, 1333 MHz DDR3, Storage 526.65 Free out of 999.35 GB. and I did not update to OS X Yosemite. (Because I've heard negative things about IPhoto and I'm working on several photobooks right now.
    Not sure if any of the information about my laptop is needed or useful, but thought it may be so am trying to be helpful.
    Thanks - ANY feedback is much appreciated.
    Frustrated mommy

    Hi there,
    When you say associated devices - are you referring to authorized devices within iTunes (i.e. devices that are able to access your iTunes account)? Or do you mean your registered devices when you log into your Apple ID on Apple's website?

  • Cant seem to get a seagate external drive to show up in finder when on the

    cant seem to get a seagate external drive to show up in finder when on the airport extreme base station. ver 7.5 using 10.6.2 any special setting to show it up in finder?

    I tested a FAT 32 drive and it will show up.
    Open your Hard Drive and look for your AirPort Extreme under the SHARED heading
    Click the AirPort Extreme icon and then click Connect As at the upper right of the window
    Your drive should appear
    If not, click anywhere on your open desktop so that the Finder menus appear at the top of the screen
    Click Finder, then click Preferences, then click the General tab
    Under the heading of "Show these items on the desktop", make sure there is a check mark next to "Connected Servers"

  • My WD external hard drive will no longer show up on my Macbook pro.

    My WD external hard drive will not longer show up on my macbook pro.  The light turns on and you can hear it running but it won't show up either in finder or in the disk utility.  This happened a while ago but I really want to get all my photos off the hard drive.  Is there anything I can do to get my computer to read it again or get my data off of it?
    I don't have access to another Mac to test it. 
    Thank you

    dead sata bridge card. very common problem.
    see all about it here:
    Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
    verify HD on another Mac however, if same, dead SATA card most likely

  • My settings icon is no longer showing.  How do get back on my screen?

    My settings icon is no longer showing on my iPad screen.  I can found it when I search for it.  But I how do I get the icon on my screen? Thanks in advance foray help you provide.

    Have you checked all your homescreens and app folders for it, also how many screens of apps have you got on the iPad (there is a maximum of 11) ?
    You could try a reset and see if you can find it after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    Of you could try resetting your homescreens via Settings > General > Reset > Reset Home Screen Layout and see if you can then find it.

  • My ipod no longer shows in my itunes help, my ipod no longer shows in my itunes help

    my ipod is no longer showing up in my itunes, it use to i have tired everything, it will only charge can you tell me what could be wrong and how to fix it please

    There may be various issues associated with updating to iTunes 10.4.1 but I was able to fix my problem with iTunes not seeing my devices. iTunes would start fine but connecting my iPhone or iPad would result in the beach ball hang. I noticed the same thing would happen if I tried to click on the MobileMe icon on the status bar so it pointed to a sync services problem. Looking in "~/Library/Application Support/SyncServices" I saw some "ErrorInfo.txt" files with "SyncDataDirectoryCorruptedException, reason = The Admin Database does not exist. It should have been created by upgradedb."
    I had already reinstalled Lion to get iTunes10.4 back which didn't help so that step may not be necessary but I restored "~/Library/Application Support/SyncServices/Local" from my Time Machine backup from the day before the 10.4.1 update and that fixed my problem.
    I've re-updated to 10.4.1 and everything still works.

  • Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

    # Question
    Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

    Same PC as I used to post the question. When I go to the "plug in check" page, it shows I am up to date and it is not disabled.
    Java(TM) Platform SE 6 U24
    Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers 1.6.0.24

Maybe you are looking for

  • Output not appearing correctly in ALV

    Hello, I have written an ALV program to display fields of the Consignment Withdrawals table (RKWA) along with the serial number from the serial numbers table (OBJK). When I display the ALV, the fields I have retrieved using the select are not getting

  • Can't make M2V files to don't transcode in CS3

    Hi, I imported some m2v and m2a files to my 16:9 wide screen project on encore cs3. When I build the project  it keeps trying to transcode my m2v files. I don't want to transcode anything. Any suggestions?

  • : Activity metadata could not be parsed. [Act

    hi when i run my jspx page am geting this error am in jdeveloper 11.1.1.6.0 my adfc-config is Edited by: ADF007 on 2012/09/17 10:14 AM Edited by: ADF007 on 2012/09/20 9:18 AM                                                                            

  • Error: Blurb / The transparent areas will show as opaque in your book.

    I get this message when uploading my book from Lightroom to Blurb. "Some photos in the book have transparency. The transparent areas will show as opaque in your book." What does it mean? If I ignore it and upload anyway, the book looks ok in blurb. B

  • How to install update 3.1.3 only on a 3G

    Simply want the 3.1.3 update in order to get an HD camera app, but when trying to do this on itunes, can only get the update to latest iOS4, which I do not want because it slows down the 3G phone. Does anyone know if this can be done?