SEAMONKEY executed an invalid instruction in module NPSWF32.DLL at 0177:30055767.

There is a bug in the Flash Player 9.0.115.0 that crashes
SEAMONKEY at kidswb.com after I press enter. First there is and add
for EON KID and it switches to the BATMAN add I recieive the error
message "SEAMONKEY executed an invalid instruction in module
NPSWF32.DLL at 0177:30055767."

aman ghus jao bans balli bamboo lekar..

Similar Messages

K-MELEON executed an invalid instruction in module NPSWF32.DLL at 0177:03715767.

There is a bug in the Flash Player 9.0.115.0 that crashes
K-Meleon at kidswb.com after I press enter. First there is and add
for EON KID and it switches to the BATMAN add I recieive the error
message "K-MELEON executed an invalid instruction in module
NPSWF32.DLL at 0177:03715767."

The thing is, these errors occur at seemingly random times and sometimes not at all. I have removed all but the latest jvm.dll but to no avail. I suspect that some kind of run-time exception is the real culprit, but one seemingly impossible to pin down (possibly due to timing or memory usage). It would help greatly to know what the error messages are refering to - the hex that is.

"Program" caused an invalid page fault in module SQORA32.DLL in 0177:02f92c

We has an Visual FoxPro that generated an invalid page fault en module SQORA32.DLL
We use Windows 98 SE, ODBC 9.2.0.6.5
Server Windows 2003, Database 9.2.0.7
any ideas...

Hi all,
Found the prob' or atleast the workaound for this...
APart from setting the fill property of the canvases to Transparent, set the same for all the DB blocks too...
Now my form is working fine in both OS.
Regards
-Sree Ram

Invalid page fault error in module kernel32.dll

I'm a VB programmer attempting to learn java. I downloaded the j2se 1.40 sdk (At present I am running Windows 98) and installed it. The download and installation process was smooth. However when I attempt to launch the program, I get the illegal operation dialog with details as follows:
SPLASH caused an invalid page fault in
module KERNEL32.DLL at 0177:bff766bc.
Registers:
EAX=0055003c CS=0177 EIP=bff766bc EFLGS=00010202
EBX=00000000 SS=017f ESP=00550000 EBP=00550010
ECX=00000000 DS=017f ESI=00550108 FS=305f
EDX=bff76855 ES=017f EDI=817b5b68 GS=0000
Bytes at CS:EIP:
e8 13 ad ff ff 8b 55 08 8f 82 b0 00 00 00 8b 4d
Stack dump:
002a0014 00000000 0055003c 0055003c 00550024 bff766fd 0055003c 005501b4 00000000 005501b4 bff883ed 0055003c bff79060 00000000 0064ffec ffffffff
I suspect this has something to do with the OS. Can anyone shed some light on this for me.
Thanks
Nancy

What command did you use to launch the program?
The readme file explains how to set the path and classpath; if you've done that, try this command in a DOS window:
java -version
C:\>java -version
java version "1.4.0"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.0-b92)
Java HotSpot(TM) Client VM (build 1.4.0_01-b03, mixed mode)
Good luck,
Mike Rainville

HFR Issues - "5200: Error executing query: Invalid Item ID"

Hi All,
We are using Hyperion HFM application 11.1.1.3. Recently we have upgraded the Oralce Database to 11.2.0.2 and reconfigured the HFM application with this new database version. When I tried to run the Financial reporting through the HFR studio, I am getting error message - "5200: Error executing query: Invalid Item ID". Please could you help me to resolve this issue.
Thanks,
Aravindh K

This was due to an invalid default Point of View for the user that was incompatible with the particular report.
Change the Preferences to User Point of View Preview and run the report again.
File > Preference > Financial Reporting > Select Preview "ON" under USer Point of View box.
Re-run the report and select the desired POV.
This will prompt the user to change their POV every time he or she opens a report. They can select the correct POV and the report runs correctly.
You can turn off later. Let me know if it fixed this issue.

HFR - 5200: Error executing query: Invalid Item ID

Hi All,
We are using Hyperion HFM application 11.1.1.3. Recently we have upgraded the Oralce Database to 11.2.0.2 and reconfigured the HFM application with this new database version. When I tried to run the Financial reporting through the HFR studio, I am getting error message - "5200: Error executing query: Invalid Item ID". Please could you help me to resolve this issue.
Thanks,
Aravindh K

Did anything change on the database side? Alias, member name? "Error executing query" usually is associated with a change in the database.
Regards
Celvin
http://www.orahyplabs.com

JAVA caused an invalid page fault in module KERNEL32.DLL at 016f:bff7b9a6

Hi All,
This problem is bugging me for last two days. Actually I am trying to embed Internet Explorer inside Java application. Everything is working fine till I dont close the application window. But just when I close the window everything goes down. I am working on win98 platform and not sure if it is this reason. The exact error message I am getting is:
JAVA caused an invalid page fault in
module KERNEL32.DLL at 016f:bff7b9a6.
Registers:
EAX=00000000 CS=016f EIP=bff7b9a6 EFLGS=00000246
EBX=00000001 SS=0177 ESP=0c08fb7c EBP=653cfbd0
ECX=004271ec DS=0177 ESI=653cfbd0 FS=443f
EDX=00427310 ES=0177 EDI=0042701c GS=0000
Bytes at CS:EIP:
ff 76 04 e8 13 89 ff ff 5e c2 04 00 56 8b 74 24
Stack dump:
004272e4 653a8f88 653cfbd0 0042701c 004272e4 004271fc 00000000 653aaf7b 0042701c 0b1df32c 5f3ed308 0c08fc70 00000000 5f3e5adc 004272e4 5f3ed6d8
Also since JVM is also crashing it is creating a log file which reads:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x6D0670CD
Function=[Unknown.]
Library=(N/A)
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
     at sun.awt.windows.WToolkit.eventLoop(Native Method)
     at sun.awt.windows.WToolkit.run(WToolkit.java:240)
     at java.lang.Thread.run(Thread.java:536)
Dynamic libraries:
0x7CC00000 - 0x7CC1D000      C:\WINDOWS\SYSTEM\IMAGEHLP.DLL
Local Time = Tue May 14 18:46:45 2002
Elapsed Time = 616
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.0-b92 mixed mode)
I am not getting any clue about this error. Please help me out. :-(

aman ghus jao bans balli bamboo lekar..

F50DBG32 caused an invalid page fault in module MSVCRT40.DLL at 0167:7967d7f0.

HI all,
I trying to run a multi-tabbed form built in forms 5.0 with Oracle 8.1.7 db running on a solaris m/c.
The client m/c os is windows '98.
but when trying to run it, i get the following error:
F50DBG32 caused an invalid page fault in
module MSVCRT40.DLL at 0167:7967d7f0.
Registers:
EAX=796aadff CS=0167 EIP=7967d7f0 EFLGS=00010286
EBX=00aef3f4 SS=016f ESP=00aef284 EBP=00aef290
ECX=008e56c0 DS=016f ESI=00357365 FS=586f
EDX=0000001f ES=016f EDI=008e579c GS=0000
Bytes at CS:EIP:
8a 06 46 8a 27 47 38 c4 74 f2 2c 41 3c 1a 1a c9
Stack dump:
00aef3f4 00aef43c ffffffff 00aef2a8 617e7573 008e579c 00357365 008e56c0 008e56a8 00aef3a8 617d8bae 0101343c 008e56c0 00aef43c 00000001 00aef3f4
. The problem is tat the same form runs fine in a Win-NT machine.
Unfortunately, we have a mixed group of users for this form. some of them have NT and some others have Win95/98...
Any help?
Regards
-Sree Ram

Hi all,
Found the prob' or atleast the workaound for this...
APart from setting the fill property of the canvases to Transparent, set the same for all the DB blocks too...
Now my form is working fine in both OS.
Regards
-Sree Ram

Invalid page fault in module cvirte.dll

I have updated two old programs using LabWindows 7.0 which were perviously created with an earlier version of LabWindows. I am having problems though updating a third program. I get an error stating...
Characerization (the name of the program) caused an invalid page fault in the module cvirte.dll at 0167:684b77f5.
The operating system that I am installing these program on is Windows 95.
I'm not sure where this error is coming from but I'm assuming there might be a problem when I build with LabWindows 7.0 and install to Windows 95. But, the previous two programs updated before this one have had no problems at all. Any help is greatly appreciated.

JuanCarlos,
Thanks for you help. Since I have been getting this error, we did some system monitoring and noticed that when the system crashes, the CPU is running at 100%. It also crashes during debug mode as well. I have been putting in break points to specifically find a location. What we have come down to is that its writes the test information to a file, but crashes when the file is recalled within the program to process some results. As far as GPIB drivers, everything is correctly installed and since we are using old ISA slots, I have made sure there are no IRQ conflicts.
The funny thing is...this exact program works perfectly fine on another station but crashes on this current station! We need both fully functional though.
Is there a
nything I should look for specifically to tell if its a GPIB problem? Anything specific for CVI problems?
Thanks for you help!
Paul

NIMAX caused an invalid page fault in module PDM.DLL at 0167:4a01259d

When I closed the MAX 2.2 and get the following problem~~
NIMAX caused an invalid page fault in
module PDM.DLL at 0167:4a01259d.
Registers:
EAX=00000000 CS=0167 EIP=4a01259d EFLGS=00010246
EBX=00761f04 SS=016f ESP=022cfe44 EBP=00000000
ECX=007700b0 DS=016f ESI=00781a10 FS=3f87
EDX=00000004 ES=016f EDI=00761ef4 GS=0000
Bytes at CS:EIP:
8b 10 ff 52 08 83 c6 04 eb c9 53 ff 15 f4 00 02
Stack dump:
00000000 00849070 00761ee8 00000001 4a01275a 00761ee4 00849070 00000000 4a012fed 00761ee8 4a012b06 0084a020 00000000 00000000 00000000 00760630
Can anyone help me to solve this problem?

Hello Ivan ,
Thank you for your inquiry regarding problems closing MAX 2.2. It sounds like MAX crashes causing an invalid page fault in module PDM.DLL. This problem can happen when Microsoft Visual Studio is installed. The following link is a great resource when dealing with this issue.
http://digital.ni.com/public.nsf/websearch/1F1B0B6A05772B6A86256BC1005634D3?OpenDocument
Other resources similar to this can be found on the ni.com website by clicking the support tab at the top of the home page. Then search for �PDM.DLL� from Technical Resources at the top of the page or topics similar to this. I hope these resources help. Let me know if I can further assist you.
Shea C.
Applications Engineering

Guest executed an intercepting instruction not supported by Hyper-V instruction emulation; event ID:18570

Hi, Just started to play with Hyper V on win 8.1 enterprise, before this I was using VPC 2007 for (32 bit guest) and vmware (64 bit guest)
Here is the problem I have, I have windows 7 32 as a guest running till date using vpc 2007, now I am trying to use the vhd file in hyper v
Option 1
Tried configuring the same vhd file in hyperv by uninstalling (addins) and removing network card configuration and shared folder
Option 2
Tried converting vhd to vhdx using hyperv gui and ps command line
In the both the options when I start the vm on hyperv, the cursor just blinks
In the event log I get to see this, any solutions for this would be of great help
'abcd' was faulted because the guest executed an intercepting instruction not supported by Hyper-V instruction emulation. If the problem persists, contact Product Support. (Virtual machine ID E965D4B5-E976-45FD-B004-F51C12662360)
Microsoft-Windows-Hyper-V-Worker/Admin
Hyper-V-Worker
18570
- System
- Provider
   [ Name] Microsoft-Windows-Hyper-V-Worker
   [ Guid] {51DDFA29-D5C8-4803-BE4B-2ECB715570FE}
   EventID 18570
   Version 0
   Level 1
   Task 0
   Opcode 0
   Keywords 0x8000000000000000
- TimeCreated
   [ SystemTime] 2014-03-31T18:52:25.736827600Z
   EventRecordID 23069008
   Correlation
- Execution
   [ ProcessID] 1240
   [ ThreadID] 3292
   Channel Microsoft-Windows-Hyper-V-Worker-Admin
   Computer Sathya-L850
- Security
   [ UserID] S-1-5-83-1-3915764917-1174268278-485819568-1612932626
- UserData
- VmlEventLog
   VmName abcd
   VmId E965D4B5-E976-45FD-B004-F51C12662360
   FailureCategory <not a known problem>
   InstructionByteCount 0
   InstructionBytes
   Rax 0x10
   Rbx 0x80
   Rcx 0x0
   Rdx 0x80
   Rsp 0x200
   Rbp 0x6e08
   Rsi 0x25db2a
   Rdi 0x7db2a
   R8 0x0
   R9 0x0
   R10 0x0
   R11 0x0
   R12 0x0
   R13 0x0
   R14 0x0
   R15 0x0
   Rip 0x9d
   Rflags 0x10002
   FpControlStatus 7F030000000000000000000000000000
   XmmControlStatus 0000000000000000801F0000FFFF0000
   Cr0 0x10
   Cr2 0x0
   Cr3 0x0
   Cr4 0x0
   Cr8 0x0
   Xfem 0x1
   Dr0 0x0
   Dr1 0x0
   Dr2 0x0
   Dr3 0x0
   Dr6 0xffff0ff0
   Dr7 0x400
   Es 0002000000000000FFFF000020009300
   Cs 00000B0000000000FFFF000000B09F00
   Ss 0002000000000000FFFF000020009300
   Ds 0002000000000000FFFF000020009300
   Fs 0002000000000000FFFF000020009300
   Gs 0002000000000000FFFF000020009300
   Ldtr 00000000000000000000000000000000
   Tr 0000000000000000FFFF000000008B00
   Idtr 000000000000FFFF0000000000000000
   Gdtr 000000000000270000002B0000000000
   Tsc 0x9886450c9b
   ApicBase 0xfee00900
   SysenterCs 0x0
   SysenterEip 0x0
   SysenterEsp 0x0
   PendingInterruption 0x0
regards
Sathya

Uninstall the VPC VMAdditions from within the VM - they are trying to do something that Hyper-V does not allow.
Hyper-V is not Virtual Server and the Virtual Server VMAdditions are not compatible with Hyper-V.
Also, you have to set the HAL to re-detect. VPC relied on a custom HAL, and if the OS in your VM is old enough, it won't automatically detect the change and will continue to use the VPC compatible HAL.
http://blogs.technet.com/b/mmodin/archive/2009/11/12/enable-detect-hal-on-a-2008-r2-vhd-image.aspx
http://support.microsoft.com/kb/299340
http://social.technet.microsoft.com/Forums/windows/en-US/0ac9e805-672d-4e00-924d-83b3671cfbb9/windows-7-physical-to-vm-and-missing-detect-hal?forum=w7itprovirt
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

How to execute a jsp instruction from a java class?

How to execute a jsp instruction from a java class?
Any help please.
Thank's

I'll detail my problem:
Supposing that I have a jsp file called: start.jsp
In the start.jsp I instanciated an object called global from the class Global ( for example ).
Then, I called a custom taglib:
<ix:mytag/>
In the suitable tld file: the mytag is defined:
<tag>
<tag class>Tag1<.....
The java file Tag1 has method:
doStartTag(){
// here is the problem
global.doSomeFunctions();
Okay, the problem is that the object gobal is not defined in the class Tag1. what to do?
I think that I have to pass the object global as a parameter to the class Tag1. How to do that?
Actually, the problem was to insert the follwoing in the doStartTag method:
doStartTag(){
pageContext.getOut().print("<%= hello world %>");
The output is <%= hello world %> not hello world.
Okay, the new problem is how to pass an object as a parameter to a class called from a tld file.
Any help please.
Thank's too much

_INS5567 caused an invalid page fault in module PFMODINTL.DLL at 0167:01651

Can someone help me with this I had to reinstall windows 98se and because of that I had to reinstall the drivers for my sound blaster pci28 sound card and that error comes up every time it trys to install the drivers for it, it happens when it gets to the 00% mark of the setup for the installation. This is the full error's details.
_INS5576 caused an invalid page fault inmodule PFMODINTL.DLL at 067:065e0.
Registers:EAX=005b0000 CS=067 EIP=065e0 EFLGS=0000202EBX=003037 SS=06f ESP=006bf78c EBP=006bfcb8ECX=2000690 DS=06f ESI=00000000 FS=447EDX=006bf7a8 ES=06f EDI=00000000 GS=0000Bytes at CS:EIP:8b 08 52 56 50 ff 5 40 85 c0 7c 0a 39 5c 24 44 Stack dump:006bf7dc 006bf7a4 00000000 00000000 005b0000 0980c20 00000000 0700000 006bf7d0 0044790 0054afc2 00000004 00040005 0054ad8 00440004 003037
please if you can help me with this please do thank you.

Hi all,
Found the prob' or atleast the workaound for this...
APart from setting the fill property of the canvases to Transparent, set the same for all the DB blocks too...
Now my form is working fine in both OS.
Regards
-Sree Ram

Error Occuring While Processing Data With DIAdem 8.1Exception EAccessViolation in module ntdll.dll at 000111DE. Access violation at address 7C9111DE in module 'ntdll.dll". Read address 37363430

Hello,
We are having an issue running Diadem 8.1 on a new HP XW 9400 with Windows XP SP2. 3 errors have been occuring with frequent crashes, they are:
1) "1Exception EAccessViolation in module ntdll.dll at 000111DE. Access violation at address 7C9111DE in module 'ntdll.dll". Read address 37363430.
2) The instruction at "0x7c9111de" referenced memory at "0x352e302d". The memory could not be "read".
3) ---Error--- DIAdem
Error in Autosequence - processing in line: 74 (IARV_VAR_GET)
Runtime Error while executing command "Iarv2Txt$ := FR(T9,L1)"
Error type: ACCESS VIOLATION
Error address: 000101DE
Module name:ntdll.dll
We are using the same scripts and version 8.1 on a variety of Dell desktop computers (W2K and XP SP2) without any issue, looking for suggestions as this affects no other software on the HP XW 9400 other than DIAdem. Appreciate any suggestions.
Message Edited by swillh on 06-25-2007 08:55 AM

Christian,
I will answer your questions in the text below. Thanks for your help.
Hi swillh,
I also would like to help you.
Unfortunately, The reported access violation in the central Windows ntdll.dll is very unspecific.
May be the following questions will help you to provide me more info.
1. You mentioned that the aut's and - I think - also the accessed text file reside on a server.
Is there a stable network connection?
The server can sometimes be a little slow but the connection is good. This computer is using the same connection that the prior computer utilized without issue.
Are the files accessed by multiple clients simultaneously?
It is possible that more than one computer can be accessing the same file, but again, this has never been an issue. We are reading the files only, not writing to them.
The processing routines we are running have used for over 5 years without any issues until adding this computer.
Is the text file read by one client while another client is writing the same file?
No, files are "read only"
2. Have you already tested opening the file with the FileOpen command before calling FR?
Yes
Do you see any chance to convert the aut to a vbs file? This gives you more alternatives in accessing text files.
3. What do you mean with "processing ATD's with 30 or more channels of data"? Where is the relation between ATD files and data channels?
Processing Crash Dummy data with file sets low in channel count (15 channels) result in successful processing without any crashes or access errors. When processing dummies with more than 20 channels we sometimes encounter these issues. The higher channel count may be the only common factor I can find in these faults.
Steve
Message Edited by swillh on 07-09-2007 08:44 AM

General Protection Fault in module WIN87EM.DLL while Running Windows XP Mode

I am attempting to run a legacy, 16-bit program, P3, on a Windows XP Mode Virtual Machine, hosted by a Windows 7 x64 box. When performing various activities in the program, I receive "P3 caused a General Protection Fault in module WIN87EM.DLL
at 0001:02C6." This occurs on multiple platforms (Core i5, Core 2 Duo).
Based on my research, I have found "The Windows 80x87 emulator library,
WIN87EM.DLL, works at the 16-bit-Windows level
to virtualize the coprocessor among multiple Windows-based applications that run inside the system VM."
It appears to me that, with the Virtual Machine using a Virtualized Processor (not related to the above reference to "virtualized coprocessor") as opposed to an emulated processor, the Virtual Math Coprocessor Device (VMCPD) and/or WIN87EM.DLL
generate an error from the virtualized processor (perhaps they do no recognize it?)
In addition "When the kernel loads an application, it checks to see if floating-point hardware is present. If a coprocessor is not present, the kernel uses the
fixup records to replace the actual floating-point instructions with
Interrupt 3x calls to emulation code in WIN87EM.DLL."
I have found some information that points to "hiding" the math coprocessor from the Virtual Machine, so it doesn't go to the processor. This apparently can be achieved by using a program called WinFloat which includes a tool called HIDE87, which is suppose
to hide the math coprocessor from the kernal.
The issue I'm running into is, to properly achieve this, HIDE87 must be loaded before Windows. I have tried a couple techniques, but I think I'm doing it wrong. I have tried adding the HIDE87 program to the System32 directory and then adding
HIDE87 (just before autocheck autochk *) to BootExecute under the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
key.
For a little more info, when you run HIDE87 from the command prompt it reads "HIDE87: Int 11h hook installed (must reboot to remove)." The documentation says this is what needs to occur before Windows loads. You can find WinFloat here:
http://support.microsoft.com/kb/97265.
Any help or insight would be greatly appreciated.

This link helped point me to winfloat to solve the very same issue with WIN87EM.dll crashing under Windows XP on VMware 5 for an old legacy Windows 3.1. I thought I would mention that the original approach taken by tstock_sjc should work fine. First
off, winfloat is a self extracting executable and we really don't want to run winfloat, but rather hide87.com which is a tiny TSR that is inside the winfloat archive. When you run any DOS or Windows 3.1 executable, Windows XP first boots up (if one isn't
already running) a mini-MSDOS 5 environment called NTVDM.exe. Just as with the original MSDOS, when the shell loads, it loads files similar to config.sys and autoexec.bat. Of course, there are more restrictions on drivers and not everything
under MSDOS is emulated but nevertheless, it is a fairly good approximation of an MSDOS 5 environment. The issue that tstock_sjc had was NTVDM.exe looks for %WINDIR%\system32\autoexec.nt and %WINDIR%\system32\config.nt instead of autoexec.bat
and config.sys. If you extract hide87.com out of winfloat.exe and place it into the %WINDIR%\system32 directory and add a line like %SystemRoot%\system32\hide87.com to the end of autoexec.nt , NTVDM will indeed load this TSR before launching its emulated
copy of of Windows 3.1 (wowexec.exe). When the 16 bit application is finally launched after wowexec.exe, the coprocessor is then masked. It worked fine for me anyway (after applying changes and rebooting). Under process monitor I could clearly
see NTVDM.exe reading autoexec.nt and hide87.com and the WIN87EM.dll GP fault went away.

SEAMONKEY executed an invalid instruction in module NPSWF32.DLL at 0177:30055767.

Similar Messages

Maybe you are looking for