Search Archive in Prime Infrastructure 2.2

We use Prime Infrastructure 2.2 which does not seem to have a search feature for the Configuration Archive as we had with the Cisco Works LMS.
Is it something that has been taken out or is there now another method of collecting this data?

Hi Wai King,
Good day!
Based on my research, it is possible to have mix services on Prime Infrastucture, however, it is not recommended. PSSW and ESW have different support levels and as such, the coverage might differ on each license if you have a mixed services environment.
Technically you can go for ESW for 50 LF licenses and PSSW for 25 additional licenses. But logically it doesn't make sense. You should either go with ESW or PSSW depending upon whether it is Cisco Direct/CBS or Partner Branded.
Thanks and Best Regards,
Jen C.
CCW Support

Similar Messages

Cisco Prime Infrastructure release 2.1 configuration archiving on CISCO WiSM2

Hi all,
Just wondering Cisco Prime Infrastructure release 2-1 support configuration archiving on CISCO WiSM2?
CISCO release 2.0 mentioned that it doesn't support configuration archiving for WiSM2 but release 2.1 doesn't mention anything on it.
Please assist.

No, it is not supported even for PI 2.1

Cisco Prime Infrastructure Scheduled Configuration Archive not executing

We have a deployment of Cisco Prime Infrastrcuture 1.3 (1.3.0.20).
Configuration Archive is a feature that collects and archives the device configurations i.e. cisco switches.
You have an option to schedule this to run, say daily, weekly etc. Once scheduled you can see it in the "Jobs Dashboard" and with the "next start time" of what you configured. I have a situation whereby the time it is suppose to start - it doesnt - howevere flags the job as a "success". Not newe device configurations are archived and the "next start time" remain the same. Its almost like it is failing to execute, but some other process under the hood thinks that it was been executed correctly?
Any ideas or experience that could help here would be appreciated!

Some extra info that has just come to my attention. At one point we were running (we're actually still running) CiscoWorks with LMS3.2 and Cisco NCS 1.x. I merged these two things together into Cisco Prime Infrastructure (upgraded the licensing to get 450 lifecycle licenses to cover the APs + all of the devices coming from LMS3.2). I followed all of the documented procedures to upgrade the NCS appliance to Prime Infrastructure. But when I type "show application" from the CLI of the NCS appliance (now the Prime Infrastructure appliance) I see this:
HQ-NCS1/admin# show application
NCS Cisco Prime Network Control System
Is that normal? Maybe this is my problem. Should this output list "Cisco Prime Infrastructure" instead of (or in addtion to) Cisco Prime Network Control System? When I login to the GUI it shows "Cisco Prime Infrastructure" and the GUI has changed considerably (menus are different) so I'm assuming that the application upgrades I launched from the CLI to go to Prime Infrastructure worked fine.

Prime Infrastructure 2.1 - Config Archive

In PI2.1, is it possible to send the config archive of my devices to a network drive? TIA

PI will always save the configurations into its database. That database is always on the PI server itself.
You can export the configurations from the database via a manual process - you could probably script it and kick it off via cron if you are handy with that sort of thing.
The export process is explained in a post by Vinod Arya in the Prime Infrastructure Ask the Expert thread.
(Edit - corrected link)

Cisco Prime Infrastructure Archive location

Hi All,
Kindly I need to know what is the location of Archieved Configuration Backup that taken by PI (are they saved in a specific repo or what?) and how can I gather them automatically??
thanks
Best Regards.

ok thanks alot.
kindly I want to ask for another issue.
after I configured the global mail setting on my cisco prime infrastructure (I set the ip of primery SMTP then sender and reciever parameters) then I press on test button to send a test mail but it not send ??
note that:
I made sure all services are running using (ncs status) command
I appreciate your kindly help

Cisco Prime Infrastructure 1.2 config deployment (no copy run start)

I have deployed some CLI templates I have created to configure multiple local accounts on some switches. However the cli templete only appears to accept conf t commands, it will not accept 'write mem' or 'copy run start' at the end to save the altered running config to startup. this results in running and startup being 'out of sync' in the configuration archives, and runs the risk of a power failure causing the config to revert back to startup. Does anyone know how to ensure the altered running config is saved to startup during the config template deployment?

I don't know if this has been fixed in 2.0 or not. By the looks of the bug it hasn't. However, there is a workaround-
https://tools.cisco.com/bugsearch/search?kw=prime%20infrastructure%20copy%20run%20start&pf=prdNm&sb=anfr&srtBy=byRel&bt=custV
BugID
CSCuf89957
Prime Infrastructure - No option to save running config to startup
Conditions:
Prime Infrastructure 1.2/1.3
Workaround:
Create a Configuration Template that runs either:
"do write mem"
Or for devices which no longer support "write mem", use:
"file prompt quiet
do copy run start
no file prompt quiet"

What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP's?

What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP’s?

• PI provides visibility for autonomous clients within the same list view as lightweight and wired clients (client list page).
• Rogue AP detection for autonomous AP's is not supported (it's supported in CUWN).
• Alarms/events for client authentication issues (e.g. authentication failure) are displayed in PI.
• Config management for autonomous AP's is via CLI template. Config comparison and archiving functionality in PI leverages these same features that were brought in from LMS, so need to defer to others in terms of whether this is a cross-platform feature in PI or is only supported on a subset of platforms. Config comparison/archive is supported in CUWN.PI supports both infrastructure (e.g. AP Tx Power and Channel, busiest AP, AP utilization, etc.) and client (e.g. client count, client sessions, etc.) reports, and there are extensive reports for CUWN

Prime Infrastructure 2.0 Device Configurations

We use PI 2.0 physical appliance.
Is it possible to save a shadow copy of the configs so that you get config in filesystem?
We want to save the configs to an external server.
Actually we are using this feature in LMS.
Regards

Hi,
unfotunately this feature is not avaiable so far an Enhancement request is already filed to track this issue:
CSCug82578 Prime Infrastructure should maintain archive shadow directory like LMS
Thanks-
Afroz
[Do rate the useful post]

Prime Infrastructure 2.0: Open Database Schema Support available?

Hello,
I searched the forum for an Open Database Schema Support for PI.
I only found Open Database Schemas for the Cisco Works LAN Managemet Solutions and Cisco Prime LAN Managemet Solutions.
Exists an open Database Schema Support for Prime Infrastructure 2.0 as it exists for the older LAN Managemet Solutions ?
Thanks.
Bastian

Programmatic interface to Prime Infrastructure is done via the the REST API vs. any open database schema.
There are published reference guides here. For the most up to date information, please see your PI server itself. In Lifecycle view, the help menu has a link to the server-based API information:

Prime Infrastructure 2.0 - Alert on Switch Config Change

We are in the process of testing out Prime Infrastructure 2.0, is there a way to get an alert when a device's configuration has changed, and send out what has changed in email? I have scheduled Config Archiving for all of my devices, and i can see the config differences when a changes is made in the Prime GUI, but we currently use Kiwi CatTools to send out emails that show what devices had configuration changes and what those changes were, it would be nice if Prime would do that so we could do away with that service. I have looked through all of the reports but do not see anything.

Hi,
I know this feature is there is LMS ,where you can configure the AUTOMATED Action based on Syslogs to get an Alert for config change or any other changes ,however I do not see this option available in PI 2.0.
Syslogs are not compltely supported in 2.0 but in PI 2.1 we should have the complete support for syslogs.
Thanks-
Afroz
[Do rate the useful post]

Prime Infrastructure 2.2 Released

For those who haven't noticed, Prime Infrastructure (PI) 2.2 was released on 17 December. The Release Notes, Quick Start guide, etc. are all posted on the PI product support page.
I downloaded the 3.2 GB ova and deployed / installed via vCenter into a VMware ESXi 5.5 environment without issue.
The migration path is to backup your supported earlier version to a repository and then restore from that repository onto the new host. I grabbed a fresh backup of our PI 2.1.2 and followed the guide to restore. It took a while (about 1-1/2 hours to restore and then 30 minutes more to start completely - see output below) but the process ran without a hitch. You do need to make sure that the new host meets or exceeds the hardware specs of the old one - i.e. amount of memory, disk and vCPUs.
My initial look at the new system seems to indicate all is well - I see all the expected maps and devices and old configuration archives were pulled over. I have quite a bit of exercising the new feature set to do but initial indications are promising.
It's good to finally see the Topology map.
- Marvin
PI/admin# show restore log
Started at : Thu Dec 18 11:59:29 2014
Initiating restore. Please wait...
Restore Started at 12/18/14 11:59:36
Stage 1 of 9: Transferring backup file ...
-- completed at 12/18/14 12:00:33
Stage 2 of 9: Decrypting backup file ...
-- completed at 12/18/14 12:05:08
Stage 3 of 9: Unpacking backup file ...
-- completed at 12/18/14 12:05:10
Stage 4 of 9: Decompressing backup ...
-- completed at 12/18/14 12:08:30
Stage 5 of 9: Restoring Support Files ...
-- completed at 12/18/14 12:08:31
Stage 6 of 9: Restoring Database Files ...
-- completed at 12/18/14 12:08:54
Stage 7 of 9: Recovering Database ...
-- completed at 12/18/14 12:36:03
Stage 8 of 9: Updating Database Schema ...
Stage 1 of 5: Pre Migration Schema Upgrade ...
-- completed at: 2014-12-18 12:56:00.638, Time Taken : 0 hr, 14 min, 59 sec
Stage 2 of 5: Schema Upgrade ...
: This could take long time based on the existing data size.
-- completed at: 2014-12-18 13:11:04.244, Time Taken : 0 hr, 15 min, 3 sec
Stage 3 of 5: Post Migration Schema Upgrade ...
-- completed at: 2014-12-18 13:31:26.188, Time Taken : 0 hr, 20 min, 21 sec
Stage 4 of 5: Enabling DB Constraints ...
-- completed at: 2014-12-18 13:31:58.651, Time Taken : 0 hr, 0 min, 27 sec
Stage 5 of 5: Finishing Up ...
-- completed at: 2014-12-18 13:32:22.251, Time Taken : 0 hr, 0 min, 23 sec
-- completed at 12/18/14 13:33:29
Stage 9 of 9: Re-enabling Database Settings ...
-- completed at 12/18/14 13:33:29
Total Restore duration is: 01h:33m:53s
INFO: Restore completed successfully.
Starting PI Server... This may take some time
Starting Prime Infrastructure...
This may take a while (10 minutes or more) ...
Prime Infrastructure started successfully.
Finished at : Thu Dec 18 13:56:36 2014
PI/admin#

Hello,
I have a case where customer is restoring backup from Prime Infrastructure 2.1 to 2.2.The zipped DB size is 28GB. It's being more than 29hrs....the restoration process ongoing. Customer is restoring the database from FTP server.
Please find the log from dbadmin_StdOut.log
ade # tail -f dbadmin_StdOut.log
In com.cisco.upgrade.MigrateRFMModel: preMigration()
2.1.0.87 matched within [2.1.0.0,2.1.0.999]
                                        -- completed at: 2015-03-10 17:07:31.928, Time Taken : 0 hr, 14 min, 27 sec
                  Stage 2 of 5: Schema Upgrade ...
                                : This could take long time based on the existing data size.
                                        -- completed at: 2015-03-10 17:11:06.612, Time Taken : 0 hr, 3 min, 34 sec
                  Stage 3 of 5: Post Migration Schema Upgrade ...
In com.cisco.upgrade.MigrateRFMModel: postMigration()
/**** PostMigration SQLs ****/
2.1.0.87 matched within [2.1.0.0,2.1.0.999]
ade # tail -f sqlUpgrade.log
10-MAR-15 05.19.38.743478000 PM +00:00: 10-MAR-15 05.19.38.743411000 PM +00:00:: Beginning upgrade script rootallUrlTask
10-MAR-15 05.19.38.744821000 PM +00:00: 10-MAR-15 05.19.38.744797000 PM +00:00:: get count from xmptask where instancename=rootallUrlTask and urlexpression=.*
10-MAR-15 05.19.38.746149000 PM +00:00: 10-MAR-15 05.19.38.746127000 PM +00:00:: Update xmptask for instancename=rootallUrlTask to exclude credential API
10-MAR-15 05.19.38.746201000 PM +00:00: 10-MAR-15 05.19.38.746188000 PM +00:00:: Committing
10-MAR-15 05.19.38.750147000 PM +00:00: COMPLETED script PI22_upgrade_rootAllUrlTask_Expression.sql execution
10-MAR-15 05.19.38.752041000 PM +00:00: STARTED script setauth.sql execution
10-MAR-15 05.26.40.031852000 PM +00:00: COMPLETED script setauth.sql execution
10-MAR-15 05.26.40.033094000 PM +00:00: STARTED script ifm_sam_pm_ddl.sql execution
10-MAR-15 05.28.15.781912000 PM +00:00: COMPLETED script ifm_sam_pm_ddl.sql execution
10-MAR-15 05.28.15.784297000 PM +00:00: STARTED script PA_Upgrade_2_1.sql execution

Cisco Prime Infrastructure 2.0 and Cisco ASA

Hello,
We've recently installed trial version of Cisco Prime Infrastructure 2.0 Express. We hoped that it already supports Cisco ASA 55xx series (especially 5505, we have pretty amount of them). But we had some problems with PI and asa durind the exploitation process.
First, I've added ASA to PI, and Inventory Collection Status is Completed, but I can't see CPU and RAM utilization graphs. Inventory.logs are non-informative.
Also, config backup is success, but when I try to watch the backuped configuration at Configuration Archive PI says "Failed to fetch raw configuration". And so on.
ASA version is 5505, image is 9.1(2).
So, I have a question: is it possible to manage ASAs with PI 2.0?
UPD: I've just tried to upgrade asa to 9.1(4), and behavior of the equipment is quite the same. Seems we shall wait for 9.2 to be released.

Have you downloaded and applied the latest Device Pack updates?
PI enhanced ASA support after the initial 2.0 release and the Device Packs incorporate that change.
The README file for Device Packs explains how to install them. (A bug currently does not allow the direct download in PI so you need to follow the method for installation from local storage after you manually download. Here is a link to the download location.

Prime Infrastructure 2.0 sync config tasks

Hi,
I'd like to know few things about PI 2.0 config handling:
1. Can PI save running config to startup config on a scheduled basis? Let's say once a week on all devices.
2. Can PI save running config to startup config whatsoever?
3. Can PI download running config when it receives a config trap from device when user enters/exits config mode?
4. Can PI export running and startup configs to a external location?
Thanks!

Hi ,
1.
*Scheduled-You can schedule when Prime Infrastructure collects the configurations of
selected devices and specify recurring collections by selecting Operate > Configuration
Archives, then clicking Schedule Archive.
like minute ..daily etc...
3. ASAI K ,this feature work on the bases of syslogs .. we do not have complete support in PI 2.0 yet so I think bases on config chnage syslogs or traps ,config will not be fetched.
4. for tihs check the below thread:
https://supportforums.cisco.com/message/3975460#3975460
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Cisco Prime Infrastructure 1.2 synchronizaton with active directory

hi all
I have installed Cisco Prime Infrastructure 1.2 and I want to make a synchronization between the PI and the active directory
note:
I want to make that to be able to search about the users on cisco prime infrastructure using Hostname instead of serching on it using IP or MAC address.
how can I do this task ???
thanks all.
I appreciate your support.

Hi Mohamed,
Integration with AD is not supported in PI
Thanks-
Afroz
[Do rate the useful post]

Cisco Prime Infrastructure 1.x Server requirements & Operating System

Dear Friends
I wish you are in very good health ........ I really very confused regarding LMS and i really needs your help ........ I need to order LMS for one of our customer with 500 devices and reporting cabailities ..... So i chosse base license "R-PI-1.1-K9" and 500 device license "R-PI-1.1-500-K9" and
Compliance Management - 500 Device License "L-PI-1.1-CM-500"
What really confused me that i tried to search server cabalitity for my requirments & Operating system and couldn't find it ...... what i need your help for is the following:
1) What is the server requirments ???
2) What is operating system (windows 2008 or VMWare VMware ESX/ESXi Version 4.1 or 5.0)
3) Is their any deticated applicance from Cisco ??
Please help
Thanks in advance

In addition to the release notes for the 4.2.3 patch noted above, please also see the 4.2 release notes which further direct you:
Server and Client Requirements
For information on server and client requirements for the system and browser, see Chapter 2 of Installing and Migrating to Cisco Prime LAN Management Solution 4.2 at:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/install/guide/
install.html
To summarize the options it describes, you can run the LMS product on any number of platforms - a dedicated Cisco hardware appliance, a physical server of your own with Windows or Solaris OS, a VMware server with a Windows server OS guest, or a "soft appliance". The soft appliance is package built with the underlying guest OS (a customized RHEL distribution with Cisco's Application Development Environment OS (ADE-OS)) built-in.
Once you have installed LMS 4.2, you should patch - first to 4.2.2 and then to the current 4,2,3. then run the software update feature to bring all package components up to date.
Regarding licensing, there is a Cisco Prime Infrastructure Ordering and Licensing Guide here.
When you order the licenses for PI 1.2 (new customer), you order the base product and then Lifecycle licenses (required for either PI 1.2 Lifecycle and LMS installations - which option is a customer choice) and, optionally, Compliance and Assurance licenses. An upgrade order for an existing LMS customer will include the base PI 1.2 with Lifecycle licenses as well as LMS in a single SKU as noted in tables 4 and 5 of the Ordering Guide.

Search Archive in Prime Infrastructure 2.2

Similar Messages

Maybe you are looking for