Search big lag for books and Movies

Not sure why but with new version of iTunes searching on books and movies is super slow.
I type out say a word like "Star" it reads each letter and takes about 10 seconds for each character to come out.
It doesn't happen in the music library though.
Can someone tell me why?

All I can say is you are not alone. I downloaded a book From Itunes Store and it downloaded in to Recently added and show's up no where else. It is not added to the Audiobooks area and you would think that because I purchased it might go in the right place. Also just FYI if you download a mpeg movie it disappears as well. And although you imported it in to your library it disappears and can not even be found with the search tool in itunes.
Karla

Similar Messages

Whenever I go to iTunes with my iPod 5th generation 32 gb iPod Touch, running iOS 8.0.2, It tells me that the "Other" category is using up 14.59 gb of data. I have no clue why it says this and I have searched the internet for fixes and none worked.

Whenever I go to iTunes with my iPod 5th generation 32 gb iPod Touch, running iOS 8.0.2, It tells me that the "Other" category is using up 14.59 gb of data. I have no clue why it says this and I have searched the internet for fixes and none worked. I have tried on a windows and a mac and noticed no change. I have tried restoring to a backup but that didn't help. I haven't had time to do a full restore but I will try if the problem persists.

An "other" larger than about 1 1/2 GB indicates corrupted files.
What is the Other on my iPhone and How to Remove It
What is "Other" and What Can I Do About It?
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

I scraped my old computer disc and lost all my data including my itunes library backup. I recreated a new itune library on my new computer but it only contains my purchased music,apps,books and movies. I Can I reverse a sync Ipod to Itunes?

How can I rebuild my itunes library on my new computer that will include all my downloaded CD's. My new library only contains my purchased music,apps.books and movies, (My library on my old computer is scraped)
The library on my ipod is intact. I don't dare to sync with the library on my new computer because I will loose my cd music. Can I do a reverse sync IPOD to Itunes?

Browse the app store. You will need a special purpose app to help you.

Is the left-hand Home screen reserved for TV and movies?

As familiar as I thought I was with Android (via my phones) I thought I would've figure out by now how to get this screen back for other uses. But so far no luck. Is 1//3 of my available Home screen space really reserved for TV and Movies (and, at that, apparently only the ones downloaded from Google Play)?

Ann154,
Bingo! You were absolutely right! And now that widget is gone.
Unfortunately, so is the screen it was occupying. Now, instead of three screens I have but two - - the original center screen and the one that had previously been the right-hand screen.
Which prompts the question of how and where pages are added or deleted from the home screens.
Sent from myMail app for Android
Sunday, 28 December 2014, 09:05AM -07:00 from Ann154 <[email protected]>:
A message from the Verizon Wireless Community
Is the left-hand Home screen reserved for TV and movies? created by Ann154 in Verizon Ellipsis 8 - View the full discussion

HT5557 Can I share books and movies purchased with Kindle Fire HD?

Can I share books and movies purchased in iTunes with my Kindle Fire HD?

You can't. ibooks from Apple can currently only be read in the iBooks app on an iPad, iPhone and iPod Touch (you can't read them on computers), and iTunes films can only be watched via iTunes on a computer, Apple TV, or iOS devices

To change the TOC icons for books and pages

I want to change the TOC icons for books and pages.
How I do this?
Thank

Hi Christine and welcome to our community
Even in traditional WebHelp output, these are simple images.
I just created a non-skinned output to check. I'm using X5 and in
this version you should be able to find the following images:
* Closed book should be: whd_toc1.gif
* Open book should be: whd_toc2.gif
* Page should be: whd_toc3.gif
So if you want to influence changes to these, you would find
them in your output folder and simply replace (using the same file
name) with the image(s) of your choice.
Cheers... Rick

Hi Everyone! Today was a big day for me, and I have my first question

Hi everybody, I've been lurking here for the past month or so, but I finally created an account today because this week has been a big deal for me, and I have a question which you guys may know the answer to. Little bit of background knowledge. I'm a rising second year student, and as far as credit is concerned, I've only had one. This card would be the Wells Fargo College Card. I started off when I turned 18 with a $500 limit, and it was increased this spring to $800. During the summer I decided to shop around on banks for my checking, and decided to go with PNC. I applied for their CashBuilder card, but was denied for the typical student reasons (insufficient credit history, loan balances too high, etc.). It did give me a credit report out of it at least (learned my Experian is 722). Anyway, in the last month, I learned that I have the chance to study abroad in France this upcoming spring, so I began research on a card with no foreign transaction fees. I became engrossed in learning about all the different banks, cards, and options not just for my time as a student, but for (what I thought) would come after graduation. I settled on the Discover Chrome and Capital One Journey for the immediate future. Discover is clearly my favorite (most of what I buy is gas / eating out), but the acceptance in France is minimal, so I needed the Journey too. I was instantly approved for both. Don't know how much my CL on the Chrome is, but my Journey gave me $2,000. This seemed really high to me, considering I have only had one card, for just over a year, which is only at $800. I slept on this for a couple nights, and decided that I was too curious on whether or not I should have tried for the Capital One Quicksilver first. To test this, I decided to apply for the Chase Freedom (a card that I planned on applying for next summer), just to see if I could get a 'big boy' card. I was instantly approved for $2,500! I was surprised, shocked, amazed, etc!!! Then I got even more curious. I now had a great rotating category card, but what if I could get (in my opinion) the best flat cashback card out there: the Citi CashBuilder. I had heard stories about how you need excellent credit, and years worth of history, so I figured this would be the card to get after graduation. But, I decided to try now, because why not. My score can take the pulls now since I don't plan on applying for anything huge. So I pulled the trigger, and was instantly approved for $1,500!!!! Again, I was shocked. So this week has been great to say the least. But, I can't help but kick myself for applying for the Journey, when it seems obvious to me that somehow, I could have had a pretty good shot at the QuickSilver. So now I get to my question. What are the chances for me to change the Journey to a Quicksilver before December. I know Capital One gives an automatic credit limit after 5 months, and that in some cases, you can upgrade that early, but would it be possible to do it sooner? If I wait until my 5 months, that gives a very short time for me to actually receive the card which I would desperately need. Also, I'm wondering just how high PNC's standards are for credit. It seems really odd that I could get a $2,500 CL with Chase (who I've had no relationship with) but couldn't get even a small limit with PNC who I migrated my checking to.

I have the Journey card, and shortly after I was approved for the Venture and Quicksilver. Check their pre-qualifier and see if either comes up for you. I know the Venture has no foreign transaction fees and it starts with high limits. But I will say my Journey card grew as well; I started with 1k and they auto increased me at 5 or 6 months to 5k. Plus soon we can combine their cards, so I would stick with the Journey for a little while and just go ahead and app for the Venture or Quicksilver.

I want to enjoy the itunes music, books and movies store as max as I can, but in my country Indonesia, we still can't purchased books, movie and music. Can apple solve this ASAP? I believe my country is now moving on using apple mobile devices

I want to enjoy the itunes music, books and movies store as max as I can, but in my country Indonesia, we still can't purchased books, movie and music. Can apple solve this ASAP? I believe my country is now moving on using apple mobile devices

Apple doesn't have full control over what they can sell in each country or region. The copyright owners control that.

Search for string and move decimal

Hello,
I am trying to write code that will search for a fractional string within an array and convert it from mV to V so it can be properly compared to the other fractional string numbers in the array.
I have an array that outputs x iterations each with a minimum and maximum column including several different types of decimal strings (negative/positive with several decimal places) each ending with either mV and V (example string: -725.543mV).
I then split the array into columns containing the minumum and maximum values of each iteration. I want to compare the minimum values of each iteration and find the most minimum, and do the same thing with the maximum values.
Unfortunatley the way I'm doing it, when I convert from fractional string to number it removes the V or mV unit label but does not convert the number from mV to V. so it compares -725.543mV with -52.334V as -725.543 & -52.334 thus declaring the mV value the most minimum. I need the program to recognize that mV is less than V or search each array for values labeled with mV and move the decimal place so it is in standard V format.
The unit label is actually part of the string and not the display (as you can see in the code I've attached) and I understand this is a little tricky with the way I have to do it. But this is a dumbed down chunk of code I will eventually incorporate into my larger program which reads the values and their units from several different types of oscilloscopes. The Scopes output the values as strings as they appear on the screen and don't differentiate between mV and V unless they are told to output the units which just tags them on the end of the string.
I'm sorry for the large post. SO to sum up I need to search an array to make sure all values have the same units, if they don't I need to convert each value to the proper unit and output the max and min from the resulting array. my code is attached. Thank you for your help.
Solved!
Go to Solution.
Attachments:
File manipulation.vi ‏15 KB

crossrulz wrote:
jcarmody wrote:
camerond wrote:
Sorry, Jim, that's not quite right. You forgot to consider significant figures (your third min is not quite right). [...]
Good catch, but, really?
That "Finally!" comes out to -5569492V to me. Holy crap. -5.569492MV! I think there's a problem there.
Carp! Stupid negative numbers, shouldn't be allowed. Put a piece of duck tape over the place for that negative sign, that'll fix it.
I'll get back, it's now a matter of principle.
Jim, how does your algorithm do when there are 8 or 9 sig figs, say -56.9492345mV? (Yep, too lazy to draw it in myself.)
Cameron
To err is human, but to really foul it up requires a computer.
The optimist believes we are in the best of all possible worlds - the pessimist fears this is true.
Profanity is the one language all programmers know best.
An expert is someone who has made all the possible mistakes.
To learn something about LabVIEW at no extra cost, work the online LabVIEW tutorial(s):
LabVIEW Unit 1 - Getting Started
Learn to Use LabVIEW with MyDAQ

The big picture for UCM and WebCenter

Can someone explain how our UCM product fits with Oracle's WebCenter? Can it replace Site Studio? Is anyone experimenting with this or can point me in the direction of connecting the Web Center product to the UCM product (10g or 11g)?
In the Oracle WebCenter - Statement of Direction
http://www.oracle.com/technology/products/webcenter/pdf/owcs_r11_sod.pdf
I read the following that implies WebCenter can connect to UCM.
Embed Web 2.0 into applications – WebCenter Services
WebCenter Services include a complete set of Web 2.0 content, search, collaboration, and communication services that can be embedded directly into applications built with the WebCenter Framework. The level of integration is unique and compelling and allows the services to be accessible in the context of the task or business flow. These services include:
A content management solution for storing and managing files and documents (Oracle Content Database or, as an additional license option, Oracle Universal Content Management – that is, Stellent)
But I don't really know what that means to me or how to get started.
Thanks.

Wll, it's quiet easy. Webcenter is designed to handle services. UCM is also complettly service oriented so you could create a webapplication with webcenter where you define services from UCM and create your own user interface.
It's nothing more than the fact that webcenter can handle services (WSDL, SOAP).
You could create a site without siteStudio, using webcenter. Nothing wrong with that but don't forget that siteStudio has lots of tools that are great for UCM like the contributor mode. Also, the fragments that are allready build in in siteStudio give a big advantage. If you want to create these things in zebcenter, you'll have to start from scratch.
I do believe Oracle is working on an portal like interface to create portlets and stuff, perhaps they will create some tools special for the use of UCM and webcenter. This offcourse would be very nice

Additional icons for book and page?

I've been searching for a way to change the standard purple book and ? page icons. is there a way in RH8?

Indeed it can be done by right-clicking the TOC items and choosing Properties. From there choose the Advanced tab and you will see options.
This only works if Microsoft HTML Help has been configured as the Primary Layout.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Endeca Search langauge support for Polish and Thai

Hi,
I am working on Endeca Search configuration for Polish and Thai websites. It is observed that Endeca does not provide stemming files for Polish
and Thai. Please let me know if there is any other way to get the stemming and other related files for multi language support in Endeca.

For Polish and Thai - it's worth checking out the MDEX 6.4 release that is now available for download. There is enhanced support for 22 languages including Polish and Thai and you can enable dynamic stemming for those languages, leveraging out-of-the box linguistic rules. More info is in chapter 16 in the advanced dev guide: http://docs.oracle.com/cd/E38682_01/MDEX.640/pdf/AdvDevGuide.pdf

Changing ALT and Title Tags for Book and Page Icons

Hi folks,
Are you aware of any setting in Robo Help that would allow
you to modify or even remove the ALT and titles introduced for the
Book and and Page icons displayed on the navigation pane. I tried
deleting it from the RoboHHRE.lng file, but still its not going
away. Other than deleting it from the rendered files (whlstt0.htm)
is there any other setting within RoboHelp that would do the trick.
My idea is to remove all ALT and title attributes given to Book and
Pages as its causing too much redundancy.
Regards,
Prabhat

Hi Prabhat -
Apologies for the delayed response: while there is no
Robohelp checkbox for removing this, you can step into the
generated files and remove it. This thread should provide what
you're looking for:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=65&catid=451&threadid =1184760&highlight_key=y&keyword1=TOC

Tables for batch and movement type

Hi all!
We have to show the batch data after GR is done with respect to different movement types. I got a table CHVW which gives the data for batch , movement type ,material and quantity.But data for 302 and 541 movement types is not updating in this table.Is there any other table for these two movements?Please suggest.

Hi,
pls use below table's
MSEG - Detail Material Document
MKPF - Header: Material Document
Regards,
Sankaran

Enhancement for Installation and Move-In

Hi experts
i want to add field at installation and move-in screen .
How i can do this , i think no BDT available for these.
Pls Reply ASAP.
Thanx

Hi,
For Installation ,you have the following exits
Exit Name           Description
ECIIFLOT            IS-U: cust. include for conn. obj. and device loc. CI_IFLOT
ECONNOBJ        IS-U: duplicate check for connection object
ECSMA001         Loyalty Account: Subscreen Integration and Field Checks
ECSMA002         IS-U: Redemption: Subscreen Integration and Field Checks
EMDI0001           IS-U: Installation - subscreen integration and field check
EMDK0001          IS-U: contract - subscreen integration and field check
EMDP0001          IS-U: premise - subscreen integration and field check
ES550001            IS-U: connection obj. - subscreen integr. and field check
ES650001            IS-U: device loc. - subscreen integration and field check
For move in
Exit Name           Description
EC500001            IS-U: move-in: determ. of security deposit amount and reason
EC500002            IS-U: move-in: data environment check upon entry
ECSBT001            User-Defined Messages in Information Log
ECSBTI01            IS-U: move-in: determination of application form
ECSBTI02            IS-U: move-in: determination of budget billing amount
ECSBTI03            IS-U move-in: customer-defined checks
ECSBTI04            IS-U: move-in: determination of transfer contract
ECSBTIO1            Default value for field for move-in/out (EC60)
ECSBTMR1            Preassign indicator for creating service notification/order
ECSBTO01            IS-U: move-out: determine default values
ECSBTO02            IS-U Move-Out: User-Defined Checks
Edited by: SivaKumar on Jun 16, 2009 12:28 PM

Search big lag for books and Movies

Similar Messages

Maybe you are looking for