Search Complaints based on Status with operator 'is not'

Hi,
I enabled NE operator for STATUS_COMMON for BTQCompl in customizing settings. Now I can create a search criterion such as 'Status is not ______'. But this does not work. The search seems to ignore the whole search criterion.
Is there any way to do it? I can only think of going through every entity in the result list and checking its status. But this will affect the performance.
Thanks,
Rohan.

HI,
Create a new data source by using generic extraction by using table for Text Table.. and design a data flow accordingly to load data to target..
regards
BVR

Similar Messages

  • Formula with operator * or / not working whereas + or - is fine

    Hi,
    I do not understand why the following Formula code gives results for OPERATOR = '+' or '-' and no record generated for OPERATOR = '*' or '/' :
    FOREACH STEP IN SELECTION.
       { ZCOPAKF2, TA2 }  =
          { ZCOPAKF1, STEP }  OPERATOR
          { 0QUANTITY, STEP }.
    ENDFOR.
    Thxs for your help.
    LauQ

    For '*' & '/' to work both the operands should not be equal to 0. Where as for '+' & '-' if any of the operands is not '0' it will generate new record.
    Check the value of your operands.

  • UCCX XPath-expression with -operator does not work

    Hi all,
    I'd like to read opening hours from an XML file. The UCCX version is 8.5.
    The XML looks like this:
    <ccdata>
       <dow>
          <dow6>
             <open>
                <from hour="8"  minute = "00" />
                <until hour="19" minute ="15" />
             </open>           
         </dow6>
      </dow>
    </ccdata>
    I simpified the file for testing, it should contain several open items later for every day of week.
    I want to use an XPath expression to check if there's a open item for the current day of week and time.
    I started with a simplified expression that should return the node for an hour value of 8:
    //ccdata/dow/dow6/open/from[@hour=8 ]/@hour
    that's working- it returns "8".
    But if I change the expression to return the node for an hour value less then 9:
    //ccdata/dow/dow6/open/from[@hour<9]/@hour
    it returns nothing. If I enter the expression into a XPath test tool ("XPath Visualizer Tool") it looks ok.
    Any ideas? Is that a bug?
    Thanks in advance
    Jörg

    It must be a bug- I tried it on UCCX 7.0(1)SR03 and it's working there.

  • ITSM Search on status with "is not" gives incorrect results due to SLA statuses

    Hi,
    When executing a search on Solution Manager ITSM tickets, on the search criterion Status and with operator "is not", the result list does not give correct results.
    For example, an incident with status "Confirmed IRT Exceeded" does show up when searching with criterion "Status is not Confirmed".
    Is there any solution for this behaviour?
    Kind Regards,
    Joyca

    Hi Vivek,
    Thanks for the Knowledge Article.
    The content of the document would indeed help if we only wanted to find "not confirmed" tickets.
    However, the same thing is happening on other statuses. For example searching for "status is not proposed solution" is still not possible with the descriptions in the knowledge document, since the user status "proposed solution" is linked to system status "in process" (I1003), like all the other in-between user statuses such as "customer action" and "in process" etc.
    The only workaround that I see is to use only "is" as operator and never "is not". However, the underlying problem remains. I think it should be possible to use also "is not" without having issues due to those SLA statuses...
    Kr,
    Joyca

  • T43 operating system not found

    My laptop is thinkpad T43, recently the problem with Operating system not found happen, and the light for hard disk can not flash. But sometimes it will disappear, the laptop can start normally, who can tell me the exact reason??????
    Message Edited by evan_ares on 05-20-2008 07:17 AM

    Welcome to the forum!
    Posting the 7-character model number of the T43 in question would be a good start...
    Downloading and burning a PC-Doctor disk and booting from it would be the next step:
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-56222
    Good luck and keep us posted.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Search Complaints: wrong Statuses are displayed

    Hello Experts.
    I am working with SAP CRM 7.0 and I have an issue when it comes to searching for Complaints.
    When I search for all Complaints, I see statuses 'open', 'completed', etc...but I do not see my statuses 'pending', 'concluded' and 'responded to customer'! (the other fields are ok, such as description, sold-to-party, priority, transaction type...the problem is just with field 'status', which brings the wrong statuses).
    In other words, I have my own User Status profile customized, with three different statuses: Pending, Concluded and Responded to Customer. However when I search for my Complaints I cannot view my statuses. Other statues are shown instead.
    Any ideas on how to solve this?
    << Moderator message - Please do not offer points >>
    Thanks a lot in adavance.
    Luis.
    Edited by: Rob Burbank on Nov 19, 2010 5:03 PM

    Hello dear Mittal,
    I have found out a way to solve this!
    The problem is that some fields are hidden in the configuration of the Design Layer. (spro - crm - ui framework - ui framework definition - design layer - copy sap design objects)...if you see object type BT120_CPL you will see that the design object status is hidden.
    There is a configuration to deactivate hiding of fields: spro - crm - ui framework - ui framework definition - design layer - deactivate hiding of fields)...so now, everything in the attributes is available, either in the 'display' or 'shown', and I can move the fields...user status now shows as well in the 'display'!
    Thanks for your help...
    Luis.

  • How to see all the PO payment status with searching field project defin.

    Dear all experts,
    could you help me on the following issue?
    In a large capital project, there are many POs, and all the POs are paid partially
    for  example, down payment 30%, 30% when the machine is received, 30% when the machine is commissioned, 10% is for warranty after a year.
    how can i see the all the POs payment status with searching field project definition. for example, i have paid how much for which PO.  i want to see the list by searching  the project definition.
    is it possible to achieve? or how can i do it?
    Please share your opinion or give me some suggestions.
    thanks a lot.
    Judy

    thanks for all of your replies.
    i have activated FM. and i have a PO triggered by the project.
    i enter the down payment for the PO using F-48.
    i can see the down payment in the PO history.
    but i can not see it using the committment item report, such as CJIA
    is it correct or not? do i need to change something?
    thanks a lot.
    Judy

  • Reg - Search Form for a VO with group by clause

    Hi,
    I have a Bar graph that displays data based on the Query below.
    SELECT STATUS.STATUS_ID AS STATUSID,STATUS.STATUS,COUNT(SR.SERVICEREQUEST_ID) AS SRCOUNT
    FROM SERVICE_REQUEST SR ,SERVICEREQUESTSTATUS STATUS
    WHERE SR.STATUS_ID = STATUS.STATUS_ID
    GROUP BY STATUS.STATUS_ID,STATUS.STATUS,SR.STATUS_ID
    It displays the count of SRs against a particular status.
    Now I need to add a search form to this graph with customer and date range.
    So we need to add the line below to the where clause.
    "SR.CUSTOMER_ID = :customerId AND SR.REQUESTED_ON BETWEEN :fromDate and :toDate"
    But the columns SR.CUSTOMER_ID, SR.REQUESTED_ON also need to be added to the select clause to create the View criteria for search panel.
    The two columns should also need to be added to the group by clause if we are to add them in the select clause.
    This would not produce the expected results.
    How do I create a search form with the criterias applied only at the where clause.Please help.
    With Regards,
    Guna

    The [url http://docs.oracle.com/cd/E16162_01/apirefs.1112/e17483/oracle/jbo/server/ViewObjectImpl.html]ViewObjectImpl has methods for doing this programmatically (setQuery, defineNamedWhereClauseParam, setNamedWhereClauseParam) that you can use to manipulate the query, the bind variables expected, and the values for the binds.
    John

  • Searching Content in Edit Status

    Hi All,
    I have a content which has just one revision ,which is rejected in workflow  and is in Edit Status.Is there a way that I can get it in search results.
    When i try to fire a query xCustom <contains> `Test`,  where xCustom is custom metadata and have value as Test ,i don't get any results.

    Hi ,
    If I understand correctly , you are looking to do search based on dStatus=Edit , right ?
    This metadata column is hidden(not used) in default search page , but is used when searching for content from Repository Manager . From the applet it utilizes the following service call along with the following parameters to list the content items :
    IdcService=GET_DATARESULTSET
    dataSource=Documents
    whereClause=(dStatus LIKE 'EDIT' )
    GET_DATARESULTSET is a service call which executes a Select query against the database. The query is built from the dataSource parameter.
    The list of Datasource present is stored / retrieved from std_resources.htm (location :  <mw_home>/Oracle_ECM1/ucm/idc/resources/core/tables)
    To list these contents from browser maybe you could write a RIDC code or run the above service from browser as mentioned :
    http://hostname:port/cs/idcplg?IdcService=GET_DATARESULTSET&dataSource=Documents&whereClause=(dStatus LIKE 'EDIT' )&resultName=list&IsJava=1
    In the result page check for @ResultSet list and under that dDocName listed are all the content id's which are in Edit status. 
    GET_DATARESULTSET does not have a HTML associated with it hence it need to be output using IsJava parameter for content listing .
    Hope this helps.
    Thanks,
    Srinath

  • Batch search strategy based on goods receipt date

    Hello,
    Can some one help me with setting up Batch search strategy based on goods receipt date currently is on batch number.
    Thanks a lot
    Thanks!
    Best Regards
    Srw

    Hi
    If you want to set up Batch search strategy based on goods receipt date......then you have to create GR Date as one charecteristics in T.Code: CT04 and assign this charecter in Class with respect to class type  023
    Then assign this class in Material Master Classification view..
    Make sure in Material master, Purchasing view...you have activated Batch management active check box....
    Then when ever you do GR in MIGO, In batch tab, In classification field maintain the GR Date..
    Then Create sort sequence in  T.Code: CU70 and you can maintain in what basis ie)in assending or desending GR Date you have to search the batch..
    And then Create Batch Search Statergy in MBC1 and there you assign the sort sequence in Details...
    Now  you do your regular procedings.....the material Batch will be searched based on GR Date...
    Reward if useful
    Regards
    S.Baskaran

  • Saving master page in search template throws error "UserAgent not available, file operations may not be optimized"

    Hi Folks,
    I was trying to save basic search template master page "seattle.master" after making change to the template.
    I have added just "CompanyName" folder and update the line below in seattle.master.
    Change is this : <SharePoint:CssRegistration Name="Themable/CompanyName/corev15.css" runat="server"/>
    When I save it, and refresh page on browser, it shows "Something went wrong" error.
    ULS says the following error : "UserAgent not Available, file operation may not be optimized"
    Pls let us know if there is a solution.
    Any help Much appreciated !
    Thanks,
    Sal
    

    Hi Salman,
    Thanks for posting this issue, 
    Just remove this below given tag and check out. It might be happened that your control is conflicting with others. 
    Also, browse the below mentioned URL for more details
    http://social.msdn.microsoft.com/Forums/office/en-US/b32d1968-81f1-42cd-8f45-798406896335/how-apply-custom-master-page-to-performance-point-dashboard-useragent-not-available-file?forum=sharepointcustomization
    I hope this is helpful to you. If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • Searching for a Project status = CLSD and open purchase orders?

    Hi,
    I am searching for a project status (Project Builder CJ20N) which allowed my to set a CLSD or a simillar status for settlement with open purchase orders.
    This staus should allowed to process with open orders BUT  not allowed to add new orders after setting this status.
    Have somebody any idee? Or it is impossible?
    Tahnk you in advanced for your Help.
    Regards Baldy

    Hi TV-kid,
    while I was waiting for an answer I got to the same conclusion, so what you offers me is quite tempting actually.
    I got a look to your website and it seems convincing. Still though, your case studies are in other business area, It's only a mater of good knowledge of File Maker.
    I did download the test-drive last version of File Maker plus their samll Business Solution. I did read most of the documentation and the learning process would be too long to construct ourself a good crossed-data base.
    I'd like to get in contact with you to look for a possible colaboration. to get private, I'd liketo do it through your contact link in your website .
    To whom shall I write?
    Thanks
    Cheers
    Cheers

  • User status at operation level

    Hi,
    I have created one user status profile and attached in order type. In this profile I have included Operation and Order header as an "Allowed object type"
    My problem is when I am changing  user status at order level , it is not getting changed automatically at operation level.
    Pls suggest me the solution.
    Thanks

    Hi,
    I dont think it is possible .
    A suggestion not sure if it works .
    Assign user status profile operation wise and then have some development to check the operation status and
    then update production order status with same user status you mentioned in operation.
    FM: STATUS_CHANGE_EXTERN will help you to change the user status of order.
    Regards,
    Vishal

  • How to integrate a SSO based in cookie with ADF Security

    At work they asked me to integrate a existing SSO based in cookie with the new ADF + Jdeveloper 11g + WLS. After google for days and read a lot of blogs and official documentation I've made a custom LoginModule. I made it very simple, it's just an "if" inside the login() function with the username, if the username is "john" I put to the Subject some Principals. My steps are:
    1- Create a new app based on "Fusion application" template.
    2- Make a new ADF Taskflow with only one view inside (the entry point of the taskflow). The jspx only contains a welcome message.
    3- Run the ADF Security wizard, all the steps with the default option, I don't change anything.
    4- Put some users and some roles in jazn-data.xml, and maping them to an application role. Then I grant permissions to the application role to view the previous task flow.
    At this point everything is ok. I run the taskflow and a basic login popup prompts me to write my username and password. Now I try to remove everything useless for me, like idstore, credentials, anonymous, etc. I only want a LoginModule that get the HttpRequest and passes it to an already done class that returns a true/false depending if the cookie is correct or not but, as I said before, my LoginModule is so simple now and even didn't try to do something more complicated than an if. The steps I try are:
    in jps-config.xml
    5- Remove idstore.xml and credentials.
    6- (loginmodule tab) Make a new login module, and put here my class. The class is in the ViewController project and JDeveloper find it navigating through the heriarchy, so I have visibility. I put REQUIRE flag, add all roles and debug mode.
    7- In the security context unmark the idstore.loginmodule and mark myLoginModule. Also delete the anonymous security context.
    All that I got until now is a 500 error (Internal server error - Authorization Exception). Sometimes (the close i've ever been to do something correct) the browser ask me for user/password but then only recognizes the users that already are in WLS (idstore from previous tests), but NOT the "john" user that is inside my custom LoginModule. Even more, if I run the WLS from JDeveloper 11g in debug mode, the runtime never stops at breakpoints inside my custom login module. It seems that my LoginModule isn't deployed or I made some error maping the roles.
    So, my questions are:
    - I'm in the good way? If I want an authentication based in cookie/httprequest I have to do a custom LoginModule? My goal is to do a re-usable code, and re-use the code that my co-workers have done. They have a class that with only the HttpRequest determines if a user is logged or not.
    - If I'm in the good way... how can I put my custom LoginModule in the WLS? I tried to search something in the Administration Panel (localhost:7101/console) but I did'nt find nothing.
    - In case I'd got the custom LoginModule working fine in WLS... how can I get a HttpRequest from a LoginModule and avoid the username/password dialog? I've to make a filter and pass it to the my LoginModule? If it's correct... how?
    I don't post my code because is so simple, it's based on DBTableLoginModule but without all the database access code.
    Thanks to all!
    P.D.: If this message isn't in the correct forum, I'm sorry. Feel free to move it.
    P.D.2: Sorry about my english, I'm spanish. I know i've to practise a lot :)

    Hi Frank,
    Thanks a lot for your answer. Just one more easy question: what I need to do is a custom Authentication Module (which will read the cookie)? If only you can point me to the correct chapter of the WLS documentation I'll be very pleased.
    In future releases of JDeveloper will be easier to do this kind of things related to security?
    Riveck

  • Filtering My Open Task in SAP CRM based on Status, Transaction & Partner Function

    Hello
    Whenever i create a Task in SAP CRM, it displays that transaction in the My Open Task of all Business Partners involved in that Transaction.
    I want to restrict the My Open Tasks based on Transaction Type, Status and Partner Function.
    1) The system should work as it is for all other Tasks but for my Custom Transaction Type the logic should be based on status of the Transaction
    2) When My Open Task component is prepared the system should consider the Status and Partner Function as well i.e. if the status is Approval of Manager, the system should show the Open Task only to the Manager and not other parties.
    3) if the status of the Transaction is Open, the system should only display this Transaction / Task only to Employee Responsible and not to Manager and other people involved in their My Open Tasks.
    I have gone through the following post in SCN:
    https://scn.sap.com/thread/2056959
    I have implemented the method DO_PREPARE_OUTPUT as per the post but it does not do anything. When i redefine the method GET_QUERY_RESULT and remove everything,it does not prepare any list.
    If possible please specify which method needs to be redefined in the component/view CRMCMP_GS_WC/TodaysTasks & if possible please share the code that needs to be maintained in that method.
    Thanks

    Hi,
    Method DO_INIT_CONTEXT should be redefined
    This should be redifined to get the collections with your required filter criteria.
    * get the collection of entities for the tasks
       lr_col      = get_query_result( gc_status-open ).
    If this does not help, Delete the collections which are not required after above selection but before this code.
       me->typed_context->resultnew->collection_wrapper->set_collection( lr_col ).
    Thanks
    Ajay Singh

Maybe you are looking for