Search for material from 2 Storage types

Hi,
When creating a delivery for Subcon PO Via ME2O the transfer order is created automatically from the source storage type
657 ( for example). The requirement is that the system should also look for material from source storage type 460 ( for example).
I did the following customization ( SPRO path):
1) Logistics execution -> Warehouse management -> Strategies -> Activate storage type search - > Determine search sequence --
For the combination of Warehouse number & Mvt type 541 ( GI to Subcon delivery) -- 657 and 460 are assigned.
2) Logistics execution -> Warehouse management -> Activities-> Transfers-> Define Mvt types-> For the combination of Warehouse number & Mvt type 541 -- I have assigned source storage type as 657.
With the above the system does the search from 657 stoarge type only and not from the both.
Is there any other setting to meet this requiremnet?
Best regards,
Prasad

Hi,
I removed 657 source storage type in the 541 mvt type set up ( Source storage type is Blank) . In the Movement Type set up for 541, "Ref.Stor.Type.Search" field is already with 541.
The Storage Type search sequence is maintained for the combination warehouse number & 541 mvt as 657 and 460 ( storage types).
When Delivery is created for Subcon PO, The Transfer order is not created automatcially ( Only delivery is created)
The requirement in detail is as below:
There are 2 plants ( AL70 & AL77) linked to 1 Warehouse (AL1). When delivery is created for subcon PO in plant AL70, the TO is also created automatically with source storage type as 657 and destination storage type as 916. The additional requirement is when delivery is created for Subcon PO in plant AL77, the TO aslo should be created automatically with source storage type as 460 and destination storage type as 916.
Regards,
Prasad

Similar Messages

How to transfer stock from one storage type another storage type

Hi Guys
I have 10 items
How can I transfer all in One Single Transfer order from one storage type to another storage type
I need to take TO print for all these 10 TO items

Hi,
Goto LT01 transaction with Movment type = 999 and stock category = Required stock category. Create a PCN and process the remaining process so as to change the stock type.
Regards,
Dilli Babu R

Error Addition to stock of material A in storage type 002 is not allowed

Dear all,
I am doing GR for PO in WM. During TO creation I am getting this error Addition to stock of material A in storage type 002 is not allowed. Hence no storage bins can be entered. May I know under what scenarios this type error props up?
Thanks in advance,
Prashanth

Please find the explanation in SAP online help:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f8449d4afa11d182b90000e829fbfe/frameset.htm
SPRO > LE > WM > Master Data > Define Storage Type
Check
- putaway strategy --> V_T3010-STEIN
- addition to existing stock indicastor ---> V_T3010-ZULAG
As you can read in the help, other factoers such as capacity may influence this.
Regards,
Csaba
Edited by: Csaba Szommer on Feb 19, 2010 7:55 AM

WM-Backflushed materials issued from different storage type

Hello my client has an issue in WH Service order issue
we face the problem that articles which are marked for back flushing aren't properly handled by the system with service orders. In normal production orders when the activity is closed on which the articles are set, the back flushing items are atomically issued from warehouse type 100 (location Backflush according to the rules set by LPK1,2,3) however when the activity of an Service order is closed the items are issued from warehouse type 914 creating and imbalance in WM. Please Is it a configuration issue or any other issue i should liik in to.
Kindly guide me to handle this.
Regards
Bheema

Hi,
Please check for service orders, yu should check CRATE parts and RELEASE ORDER parts. In their control cycles in LPK1/LPK2 you can define from which storage type / bin they are consumed when you book consumption against your PrdOrdservice order.
At the time of backflushing (in standard system) the components will go to 914+dynamic bin (or fixed bin, based on your settings). Normally TR creation is set on WM/IM interface and processing the TR you can move the components from WM to interim storage type 914. Thanking you.

Transfer material from one storage location to another storage location

Is there any bapi to transfer material from one storage location to another storage location

Hi,
You need to use the below BAPI
BAPI_GOODSMVT_CREATE
Regards
Sudheer

When I do Google search for images from my website nothing newer than September 2012 shows up. How can I get Google to find new images?

When I do Google search for images from my website nothing newer than September 2012 shows up. How can I get Google to find new images?

Have you uploaded a sitemap.xml recently and checked your webmasters account to see when your site was last crawled?
http://www.iwebformusicians.com/Search-Engine-Optimization/SEO.html

Searching for material with material group

Hi Friends,
How to get the old material no. material no., description after searching for material with material group.please reply....

SE16
table MARA
field BISMT is the old number
MATKL is material group
table MAKT
MAKTX description
you can make a query join with MATNR
Best Regards

Itemization for Material from PIR- Display all condition types

Hi,
I have 4 condition types in Purchase info record (PIR), when I do CK11n-Material Cost estimate for this material, in the Cost Component view ->Cost of Goods manufactured->Itemization for Material - I only see one line with total of the 4 condition types in the PIR.
But I would like to see all the 4 lines (Condition Types from PIR) in the Itemization for material. Can I achieve this with any configuration settings?
I would appreciate any response on this.
Thanks
Sree

I think you can do this if you map the purchasing condition types to origin groups. Try doing the following:
1. Use t-code OKZ1 to create the needed origin groups (one for each pricing condition type).
2. Use t-code OKK4 to map the pricing condition types to the origin group. To do this, select the valuation variant you are using and click on the delivery cost button.
3. Also in the valuation variant, change your sub-strategy sequence setting for material valuation to A (Quote price via condition table).
4. In t-code OKTZ you will probably need to assign these origin groups to one or more of your cost component.
Give this a try and see if it works for you.
Thanks,

WM : Automatic replenishment TO for fixed bin from warious storage types

Hi Gurus,
We have storage type 011 - fixed Bin storage type , 022 - self Storage and 055 - High Rack Storage. Also we have set up for automatic TO creation for fixed bin in fixed bin storage type when stock falls below minimum fixed bin quantity.
My problem is : system only creates TO when there is some stock in 055 - High Rack Storage. If there is no stock in 055 system doesn't create any TO. But there's lots of stock in 011( other than fixed bin) and 022.
we want system to serch for 055/ 022/ 011 sequence. So if there is no stock in 055, it should go for 022 and then 011.
Can anyone advise me on this? I will be really grateful.
Kind Regards
Raja Ram

Hi,
Can you please explain me the steps required to config the picking strategy for fixed bin replenishement?
Thanks & Regards
Raja Ram

How to remove the stock from 916 -storage type

Hi experts,
In LS25 for 916 storage type it is showing 30 & -20 Quantity for two Quants
How to remove the stock?
Regards
vr

the usual way to remove quants from 916 is by cancellation of the picking, which is done with LT0G transaction.
if the delivery is already goods issued, then you have to use LT01 to move the quants.
The positive quant of 30 quantity can be moved to the place where it phyiscally is.
the negative quant can only be eliminated by moving a quantity from a positive quant onto it. You should have a positive quant of this material in any bin of your warehouse. so you move from this bin to 916.

Report for material documents with storage location

Hi gurus,
I would like to know if there is a report to display material documents but in the same screen display storage location from and storage location dest.
Thanks for your help.
Regards.

Hi,
You can use MB51 or MB59 with customised layout selection for your requirement.
With regards,
Ajay.

Stk posting change for Material received in movement type 101

Experts,
A material received in Mov type:101 / Inspection type : 01 and rejected during Inspection was posted in To Reserves instead of Return Delivery.
How to change the posting to Return delivery stock from Reserves stock.
Regards,
RPV.

Dear,
First check reservation is created against reserv stock of material.
You can check reservation with MB23.
If yes than delete it first and than create return delivery for material with MIGO.
Regards,
Mahesh Wagh.

Create TO from Quality storage type

when i try to create TO for certain material through LU04 , the TO created but the source and the destination are the same ( the quality storage type ) see the details of the TO
2000012767 0001 1014654            Q   918 QUALITY2                250 KG 1
    AE50            02.08.2010         922 TR-ZONE                 250
2000012767 0002 1014654                922 TR-ZONE                 250 KG 1
    AE50            02.08.2010         918 QUALITY2                250
it should be the normaol storage type and the distination shold be the bin
how can i solve this problem

Pete,
You can also mention a specific qunatity in Material Master WM2 as LE quantity.
Once done you can go ahead with LT01 with Full quantity & that will split in multiple line Items.
Please use TO creation screen control as 1 i.e. Putaway prep that will help you to entre multiple destination Bins (if differs)
Thanks,
mahesh

Premiere Pro CC's sequence lost. Is there a way to "search" for it from outside the project?

I seem to have lost a sequence created in Premiere Pro CC. I can't find it anywhere inside the Project bin.
We have so many same-name, older projects (between Auto-Save, different drives and so on) that looking inside each of them would take forever.
But we do know the name of the sequence. I am wondering if there is a way to "search" for a sequence name from outside the project?
Thanks

there is a way to "search" for a sequence name outside of the project,
but it would be a pointless waste of time.
sequences are only saved within the project file itself!!
We have so many same-name, older projects (between Auto-Save, different drives and so on) that looking inside each of them would take forever.
better get at it then!
hahahahahahahaha!!!

Costing run with values for material from info record.

Hi All
there is requirement with my client, that when i run my costing run the values of the components in BOM should be from the latest purchase order.
For this i am maintined valuation criteria as price from info record and sub strategy as gross price from PO.
When i am create a PO the info record is created automatically in background. So when i run costing run the value is picked correctly.
Now when i create a PO with same material from diff vendor the info record is generated, but on costing run it picks the value from the info record of earlier vendor. For this i go and check the conditions tab in info record, ensure its balnk and save it. Again generate new PO and then run a costing run. This time the system reads the latest info record.
My problem is that i want to ensure that during the costing run, system should read the latest info record w/o manual intervention. System behaviour is not consistent when there is multiple vendor and same material info records. Sometimes it pick up the value and sometimes it refers the old info record.
Can any one help me out in resolving this issue. Its critical.
Regards
Rakesh

Hi!
Generally first info records will be created with vendor, then PO will be created, based on info records price, price will be updated in PO.
If you have more than one vendor for same material, you have to create info records for each vendor. then you need to maintain source list, where you can fix the vendor. If there is no fix vendor, then you can do schedule agreement with vendors, where you have to give proportionate percentages again each vendor.
Now for costing run :
1. if you have only one info record, the price will take from that info record.
2. if you have more than one info record, you need to mantain source list, where you can tick the fixed vendor, then system will take price from that vendor info record.
3. if there is no fixed vendor and you have maintained scehduel agreement with weightage to vendor, then higher percentage vendor info record price will be picked up.
4. if you have more info reocrds, not maintianed source list or schedule agreement, price will be picked up from first info record ( based on info record creation date).
5. if you have a schedule agreement, but you have given equal weightage for example 50% and 50%, then also system will pick up from first info record.
i think it is clear now.
regs,
ramesh b

Search for material from 2 Storage types

Similar Messages

Maybe you are looking for