Search function + Access Point problem

I access the Google Search from the Search software pre-installed with the N97 and set the Network destination as "Internet".  I got 3-4 access points under "Internet" (4 if there is a saved wifi point). 
I have no problem at all conducting the search as it would use the 1st access point under Internet, but when I try to view one of the search results, which is opened in the native broswer of the phone, it would use another access point (the 3rd priority access point) to connect.
Does anyone have any clues on how to resolve this?

Hi, not sure if this will solve your problem but try:
Select 'Web'
Once there Click 'Options'
Select 'Settings'
Select 'General'
Select 'Access Point'
Choose 'Ask when needed'
Hope this helps

Similar Messages

  • E75 Email (Access Point problem)

    Hi,
      I've setup nokia email without any problem using my WiFi and it was synchronizing without a problem. Since then I've I'm unable to change the Access Point to my Mobile provider. I keep getting "Server not found", even though the server name is still properly configured (netac3.vie.hosting.com). Can anyone help?
    Regards,
    Nuno

    Sorry when I wrote this was in Houston at the Continental Presidents club being yelled at... sorry
    The problem still exists, with no solution found so far, can anyone help? 

  • LAPAC1750 Access Point Problem

    I have a device (Sony Xperia Z1 Compact) which cannot connect to the Access Point. The device can connect to other Access points (tried Motorola, Fritzbox, Cisco) without any problems.
    It does not matter what setting I configure on the LAPAC1750. It does not work for the Sony Xperia Z1 Compact.
    Any idea?
    Solved!
    Go to Solution.

    Did Linksys ever get a resolution back to you?  I noticed they have not posted any new firmware since June (stil 1.05.00), and from other threads on other products it seems this is typically resolved with a firmware update.  I bought three LAPAC1750s to install in our large home on each of our three floors, and every device (PC and Mac laptops, iPad, Kindle Fire HD, iPod, iPhones) can connect to them EXCEPT my HTC One M8 running Android 4.4.4.  Shows same behavior you are seeing, will try to connect and then just disable it.  Same behavior on both 2.4GHz and 5GHz.

  • Searching for Access Point Report by SSID on the WCS

    Hello,
    im searching for an option to make a Report on the WCS (Software Version 6.0.170.0 )  to see all SSIDs that are ratiated in detail by the Access Points.
    I mean something like this: (example)
    AP 1   -  SSID 1 and SSID 2
    AP2   -   SSID 1
    AP3   -   SSID 3 and SSID2
    Or is they any other alternativ to see that on the WCS or WLC?
    Thank You

    Hi,
    The "AP SUMMARY" report will provide you the AP group to which the AP is mapped to.. here by we can come to know what all WLANs are getting broadcasted by the AP..
    REPORTS LAUNCH PAD >> DEVICES >> AP SUMMARY >> NEW.
    Lemme know if this answered ur question and please dont forget to rate the suefull posts!!
    Regards
    Surendra

  • Access point problem... help

    i have an access point which is not suppose to be in the native vlan, the port which is connected to the access point has no trunk.
    when i checked the native vlan, this error prompted...
    %SYS-4-P2_WARN: 1/Tag 1 on packet from <mac add> port 1/3, but port's native vlan is 2
    but when i unchecked it, the connection lost between AP & switch...
    what actually happened? can anyone plz help me?

    Hi,
    the connected switch a Cisco Switch? If yes do you have configured a "switchport access vlan xx"?
    If the connected Switch is not a Cisco i had a problem similiar to yours and fixed it with the setup of the used VLAN (in my case VLAN 10) as Native VLAN in the AP.
    Maybe you should setup the Native VLAN to 2 in your AP Config.
    I Hope that helps.
    Best regards,
    Frank

  • 3600 Series Access Point Problem

    Have a AIR-CT5508-K9 Controller running 7.0.116.0 software.
    Just purchased 3 AIR-CAP3602I-A-K9 access points.
    When these try to join the controller we receive the following error message.
    %CAPWAP-3-UNSUPPORTED_WLC_VERSION: Unsupported version 7.0.116.0 on WLC Plt-72-Controller-1
    Do the 3600's require a certain revision of code?
    Also I read were the 3600's require a GE connection. Will they work on a FE connection?
    Please advise.....................

    Yes, you need to be funning 7.2 code for the 3600 to join and work.
    Make sure you check the release notes for hte supported AP, incase you are running any that are not supported in 7.2
    Steve

  • Access point problem

    I installed a MIDlet in my nokia 6600. When application tries to open an Http connection I have to select the access point. In my mobile I have set my default access point. Still it asks me to select access point everytime. How can I make the access point selection automatic? Can somebody please help me?
    Regards to everyone.

    2.2mb of free space seems to be more than enough for you to create a new access point, hmm.. strange.
    Would you want to try  freeing some memory space by moving gallery items from the phone memory to the memory card? If it still don't work, restoring of factory settings might work but all data will be lost if you choose to restore all. The last resort would be to have a software reflashing which can be done either via the NSU or at the service point.

  • S110 wifi access point problems

    I am trying to connect my camera to wifi by adding it as an access point.  I typed in the password correctly but it keeps telling me unable to connect.  Please help! Thanks in advance!

    Hello Rainingmisery,
    Rather than going through the steps here through the Canon Forum, we would actually like to direct you to our web site where we have a dedicated section on getting the PowerShot S110 connected wirelessly. 
    We anticipated that our customers would like more in depth information on wireless connections and as such made a specialized support site complete with videos and articles dedicated to this camera. 
    The main PowerShot S110 wireless help web site is here.
    Here you will see specific videos and at the bottom are links to articles for making wireless connections through WPS or Manual.  We think you will find this quite useful in setting up the camera wirelessly. 
    If you need further assistance or would like to speak to someone directly, we have our world class technical support team at your disposal.  Get in touch with us through our service and support site! 
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Nokia Email Access Point Configuration Disappeared

    I`ve just upgraded to the new Nokia Email client on my N95-1 (model RM-159). It says it's version 9.04 (21).
    Since upgrading, I haven't been able to configure the Access Point to be used by the email app, which used to be under General|Service Info. This is quite important to me, since I only want to let the app work when using WiFi.
    Does anyone know what happened, or how can I fix it ?

    This works for the E71: for the time being a workaround for the access point problem:  
    I set my SmartConnect connection (you can only download this from the Download icon on your phone) group as the default APN, I have the client using Wifi if available and the cellular network if not. This MUST be configured at initial setup, ie when you install Nokia Messaging, change it from "default" to the SmartConnect access point group. 

  • Nokia email - access point

    I have an N96 with S60 r3 fp2. It supports "destinations" (ie access point groups) as well as the concept of a "default" access point (group).
     Only "new" apps use these capabilities. The internal imap client seems to be ok with default, but "nokia messaging" is not and will only allow a specific AP to be selected.
    Since I have trouble with 3G/GSM at work I roam onto WIFI for other apps. NOkia messaging needs to do the same.
    Ideas?

    This works for the E71: for the time being a workaround for the access point problem:  
    I set my SmartConnect connection (you can only download this from the Download icon on your phone) group as the default APN, I have the client using Wifi if available and the cellular network if not. This MUST be configured at initial setup, ie when you install Nokia Messaging, change it from "default" to the SmartConnect access point group. 

  • Problems with static IP from TP-Link Access Point

    Hello Guys!
    I'm new with Apple - i got a Macbook Pro Mid 2012 since 2 weeks.
    Everythings running fine and im really happy with the Macbook - except of the Wifi.
    I have the problem that the internet connection is just working temporarily, sometimes its just working for 1 minute, then its just stopping. im still connected to the wifi, no connection abortion. websites are just not getting loaded or just half.
    i cant find a solution for it, so please help me
    I connected a TP-Link tl-wa801nd with a ethernet cable to our companys network - creating a wifi network access point with which i can connect to with my devices (Macbook Pro, iphone and Win7 PC)
    I have to give my devices a static ip, when i want to connect with it:
    IP: 192.168.0.151 - 192.168.0.199
    Subnet mask: 255.255.255.0
    Router and DNS: 192.168.0.1
    These preferences are working perfect with the iphone, Win 7-PCs and some friends Android or BB phones. No problems.
    Except of the Macbook pro:
    I got the newest Mavericks on it and the same network preferences (except of a ascending ip address and the search domain 192.168.0.1)
    But like i said above - network is just working temporarily, sometimes for 1 minute, then stopping for 10 minutes... The problem must be the macbook, because every other devices is working fine.
    Thank for your helping answers
    banana-benjiro

    Hello banana-benjiro,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found
    http://support.apple.com/kb/ts3408
    Best of luck,
    Mario

  • Is there any Java library that can invoke access point functions?

    Hi, Is there a Java Library that enables programs to access access point and run their functions?
    I want to create sample code that invokes functions of access points such as signal strength e.t.c.
    My ambition is to create a model that can identify the position of wareless devices such as PDA in a wireless LAN

    Thanks for your reply, sorry I have not gotten back sooner. I'm still having the problem.
    All the access points have the same SSID. I did try deleting the network and rejoining, however, I don't think it properly "forgot" all the settings when I did that. I haven't yet taken the time to try to delete the network more thoroughly. I'm still turning off airport, carrying the laptop to within a few feet of the access point I want to join, and turning airport back on, on an almost daily basis.

  • Problems probing for rogue access points

    Hello,
    I have a situation where I am trying to locate a rogue AP in one of my office buildings. When I bring a laptop over there with NetStumbler or Inssider, I get no response from any access points or clients. Its like that throughout the entire building. However when I leave the building, the AP start to come up but I cant get near them.
    I have another build that we have as well and the probing works just fine. Would there be a controller template or access point template that would be causing this problem?
    Here is what I am running:
    Cisco 4400 controller with firmware 4.2.130.0
    Cisco 4400 controller with firmware 5.0.148.0
    Cisco WCS 5.1.64.0
    The access points that are connected to the controller with a firmware of 4.2.130.0 is the one that seems to be stopping my attempts with probing. So far my searching for causes has not turned up anything=(
    Any help would be greatly appreciative.

    What are you seeing in the logs? Are the two controllers being used as primary and secondary? You should keep the code the same, just in case ap's move to the other controller?
    When you see a rouge ap, it will also state which ap's are hearing that rouge ap and the signal strength. If you see it -86db or worse, then it is outside of your building most likely.

  • IOS 6.0.1 - Problems with certificate based authentication on wireless access point

    Hi all
    We are using iPad 2 as order terminals in our shops for about 5 months. Some of the iPads (the first who entered the field) started to cause problems now. These iPads are no longer able to keep long-term connection to the wireless access point in our stores. After selecting the SSID a successful authentication using the stored EAP-TLS certificate is performed (this can be seen in the log files of our wireless controller and by the IP adress that is given by DHCP). But within seconds the affected iPads opening up a captive portal page (empty, without contents) and separates the connection to the SSID after a short time again.
    Affected are currently only iPads 2 with iOS 6.0.1, which were staged about 5 months ago. The newer devices with iOS 6.1+ connect without problems and open no captive portal page. The first cases occurred on the last Wednesday. Before that everything worked without difficulty. No modifications took place on the security structure.  The numbers of affected devices increased until all iOS 6.0.1 were affected.
    Access to other SSIDs (without use of certificates, by entering a key) for the devices is still possible (the devices does not open an captive portal page). The DHCP scope is not used up, so there are enough IP addresses available.
    "Newer iPads" with an iOS of 6.1+ are are showing no problems on the same wireless access point, where the older devices are rejected. New and old devices use the same certificates and authentication mechanisms.
    In the analysis of the issue, it turned out that  the problem can be solved by an update to iOS 6.1.3. Subsequently, the iPads will be able to rebuild a connection with the access point, without a captive portal page.
    Since the bandwidth is very narrow dimensioned in our stores, the communication of the iPads was severely restricted. Thus, the iPads are for exampleare accessible for the APNS but can not find iOS updates or check for their availability.
    A comprehensive update to iOS 6.1.3 is currently excluded.
    Does anyone knows this issue? What else can be done (except from updating)?

    I will answer my own question in case it helps anyone else.
    It would "seem" the ios 6 devices try the proxy and if that is not working they resort to the def gateway.
    To Fix I did the following:
    Brocade WIFI network has IPS and Advanced Firewall rules that seemed to be tthwarting some traffic, the iphones would then try the default gateway and be blocked at the FW. 
    I disabled the IPS and the Advanced Firewall Settings on the wifi as they are redundant to our main IPS and firewall that all traffic flows through anyway.  I will tune it later, but when the CEO is demanding a fix "**** the security, full speed ahead"
    Created some rues on the firewall to allow...
    - IMAP-SSL (port993) outbound
    - SMTPS (port 465) to yahoo servers outbound
    - tcp port 587 to yahoo servers outbound
    - https to akamai servers
    Most http and https goes through the proxy as it should, BUT...
    It seems that the akamai traffic allways ignores the wifi proxy settings and just heads straight for the default gateway.  I suspect there is a bug in the icloud app? 
    Hope this helps someone else.
    -Bo

  • Problems with AirPort and WPA access point

    Okay, I have done quite a bit of research and I still cannot resolve my problem because of this, I am turning to this user community.
    Here is what I know as of right now:
    I am running Windows OS X 10.4.4 with AirPort Update 2005-001. My Access Point is a 3COM 8250.
    The AP is setup not to broadcast its SSID, to use WPA-TKIP (or in Apple terminology, WPA Personal) and the password is set to use alphanumeric.
    When I try to connect my PowerBook with the SSID name, WPA Personal and the correct password, I get the following error:
    The password you entered is not correct for the Airport network *******.
    To troubleshoot here are the test I have run and their outcomes:
    Test
    - Result
    Set the AP to completely open
    - Connected
    Set the AP to open, didn't broadcast the SSID
    - Connected
    Set the AP to WEP, broadcast the SSID
    - Connected
    Set the AP to WEP, didn't broadcast the SSID
    - Connected
    Set the AP to WPA & WEP, broadcast the SSID
    - WEP : Connected
    - WPA : Not Connected
    Set the AP to WPA & WEP, didn't broadcast SSID
    - WEP:Connected
    - WPA:Not Connected
    Set the AP to WPA only
    - Not Connected.
    Now, I should mention that when I was running 10.3.3 I could not connect either. The AP is running the newest firmware and I have three Windows XP SP2 laptops / workstations that can connect with no problems.
    I have tried to find a compatibility matrix on both 3COM's and Apple's websites to see if it might be a compatibility issue but I have not been able to find one on either site.
    Any help that anyone could provide would be greatly appreciate.
    Thanks in advance.
    17" PowerBook G4   Mac OS X (10.4.4)  

    Hello MisssAsh. Welcome to the Apple Discussions!
    It's always a good idea to do a complete power recycle when changing network configurations.
    Try the following, in order, checking for Internet access after each step, until resolved:
    1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
    2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
    3. Perform a complete power recycle of your network components as follows:
    Modem/Router Power Recycling - Quick
    o Power-off the modem, AirPort Express Base Station (AX), & computer(s); Wait at least 5 minutes.
    o Power-on the modem; Wait at least 5 minutes.
    o Power-on the AX; Wait at least 5 minutes.
    o Power-on the computer(s)
    If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
    Modem/Router Power ReCycling - Full
    o Power-off the modem, AX, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    o Power-on the modem; Wait at least 15 minutes.
    o Power-on the AX; Wait at least 5 minutes.
    o Power-on the computer(s)
    4. Contact your ISP to have them perform a "modem reset."

Maybe you are looking for