Search help for PLANT

Friends,
i have a field as 'plant' in my custom table in SRM system which sould have search help(F4). at the time of creating new entry in the custom table search help should have to call R/3 to pull the plant value from t001w. is there any direct way to do this without do any custom work in the R/3 side.
John.

If you set the primary key relationship to the plant table it will work in R/3 but not SRM. You need to build some custom search help.

Similar Messages

Addtional field display in search help for plant in MM01/MM02/MM03

Hi Experts,
my requirment is that when see search values of ( F4) plant field in MM01/MM02/MM03 t.codes only avilable plant and name1 values . i need to display name2 values also. How i can search help of plant field should be enhanced.
Regards
Jaya

Hi,
You need to:
1/ append ALV grid structure PLM_ALV_116 with field (in SE11)
2/ in form WERKS_LISTE in include LMATEFLI you need to implement following modyfication selecting NAME2 for all the plants which are to be shown:
FORM werks_liste.
* convert into ALV list
DATA: c_structure_name TYPE tabname VALUE 'PLM_ALV_116'.
DATA: status_set TYPE slis_formname VALUE 'ALV_PF_STATUS1' .
DATA: et_list TYPE TABLE OF gs_list_type_06 .
DATA: l_et_list LIKE LINE OF et_list .
DATA: l_seqwerk LIKE LINE OF seqwerk .
* Prapering data to be display
* SET TITLEBAR 'TIT' WITH text-003. Note 821186
G_titlebar = text-003.
LOOP AT seqwerk INTO l_seqwerk .
    MOVE-CORRESPONDING l_seqwerk TO l_et_list .
    APPEND l_et_list TO et_list .
ENDLOOP .
"-------->INSERT
SELECT name2 FROM t001W
    INTO CORRESPONDING-FIELDS OF TABLE et_list
    FOR ALL ENTRIES IN et_list
    WHERE werks EQ et_list-werks.
"<--------
* Praper fields for ALV Disply
PERFORM alv_list_fieldcat_create
        USING lt_fieldcat c_structure_name .
* Diplay ALV list
PERFORM alv_list_display TABLES et_list[]
                           USING c_structure_name
                                  status_set
                                  space.
ENDFORM.                    "WERKS_LISTE
Regards,
Marcin

Search help for Plant in Ztable

Hi,
I need to create the search help for werks(Plant) in Ztable,
Rewards will be sure for usefull answers
Thanks and Regards,
Jatender Narang

Hi
Good
Check the below SDN link which will give you clear idea on creation of a Search Help.
Create Search Help
Thanks
mrutyun^

Material Search Help for VA01 - Material by Plant

Hi Experts,
I want to know how to find out the search help for that material in that tcode. Please tell me in detail how to proceed with this and where to go with the modifications or enhancement.
I am not familiar with user exits, so please help me.
Regards,
Bhaskar.

Hi,
you don't need any exit / badi.
Go in VA02, in material number go in technical information : F1 ; F9
You will show there is no search-help link to the field. So the search-help is taken from the data element.
Go in SE11 and show the data element MATNR.
In the thirth tab you will find the search-help link : S_MAT1.
Go in SE11 and show the search help S_MAT1 (each time you could double click instead of reopen SE11).
This is a group search, that means, it contains many search help.
Copy a simple search help, modify as you would like.
Add your own search help in the S_MAT1, and don't forget to link fields (parameters).
You don't need any object key or user-exit.
You will affect all the screen of SAP using this search-help S_MAT1.
Regards
Frédéric

How to build search help for company code (BUK) in SRM

Hello,
I am new to SRM and was wondering if any have come across similar requirement. I am a workflow developer and we are building a custom table to derive deadline escalation timelines. We are also adding a field in our custom table for company code so that we can have company specific deadlines. table T001 is empty in SRM and hence we are unable to use F4 (search help). Is there existing functionality in SRM that gets this search from the backend ECC system and displays when F4 is pressed. How can I use that functinoality?
Appreciate any info folks.
Thanks again.
Samir

Hi
Which SRM version are you using ?
<b>Related links -></b>
Re: Search Help on SRM front end screen
F4 Help for WBS Element
Re: Company Code defaults
Re: Search help for Custom Item level field
Custom field in SRM as a dropdown field with values stored in R/3
Calendar help for Date i/p field in SRM 5.0 shopping cart
Company code
Problems assigning values via F4 or search help
Also There is a standard table in SRM which contains Plant data ->
<b>BBP_LOCMAP</b> (Mapping Table Business Partner --> System --> Location)
Try creating a custom search help based on this Table, defined as selection method and assign the same to the related field.
Do let me know.
Regards
- Atul

Search help for field in Standard Transaction

Hi Experts,
      We have a requirement to have an F4 search help for a standard field .
( Plant, werks, Tx AS01 ). This field is not associated with any standard search help, but it throws F4 values programmatically .
   We need to associate a standard search help ( BETR_BUKRS ) with this Plant field.
1. How to proceed abt it ( As it is a part of module program , can we straight away associate with the search help in the property ) ,it is a field of standard Transaction .
2. If we include search help above, what will happen to the already existing F4 functionality ? Can we have both in tabs ?
   Thanks a lot,
~Abap Lover

Hi Seshatal,
     Thanks for the input, but this field does NOT have any ON VALUE REQUEST event associated with it ....
   as soon as F4 is hit, it goes to Function help_start ,so I don't think we can make any changes here as it is standard .
   I think including a standard search help will help....how to achieve this ?
Thanks,

Problem creating a hybrid collective search help for werks,bukrs and ekorg

Hi All,
I have to create a collective search help for Org_key field of a custom table.
This org_key field is a char4 field and can hold the value for plant , bukrs and ekorg.
I need to create a collective search help which includes
C_T001                          Collective Search Help for BUKRS (Company Code)
H_T001W_NEW     Possible Entries for Plants
H_T024E                         Input Help for Purchasing Organization
I have added org_key field in the field description , how can i do the parameter assigment ( or declare the field description ) so that if the user press F4 for org_key field ,he is able to see all the search paths corresponding to C_T001,H_T001W_NEW, and H_T024E simultaneously, and corresponding to value chosen ( for plant , werks or ekorg ) the value is passed back to the org_key field.
Thanks in Advance
Regards
Anurag

Problem resolved. You can hard code values, like the domain name within the search help.
Although I have found that if you don't use a search help and you have domain values then your drop-down list values will be automatically populated from the domain values for the field. At least in my dynpro it does.
Jas

Creating search help for a field in AdHoc Query

Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten

Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten

Search Help for Vendor Feild not getting populated in the Screen Element

Hi Everyone,
In transaction Miro, I get a POP-UP for Invoicing Party i.e. Vendor and Users required a custom search help.
The Search help for Vendor(LIFNR) is KRED_C and i appended a Z search help under this.
Now that the search help exists and I can drill down the values too but when i select/choose any value, that value is not getting populated in Screen feild.
is there any validation I need to do for this.
Please suggest me... I checked SDN there are many things but i couldn't figure out wat i need to do and where I need to modify.
Regards,
Raj

Dear Hema,
Could you please tell me how many internal tables you are using to store the data for display.
I observerd that you have lt_stock and lt_mat2 declared in the part of the program
>DATA: lv_stock TYPE lty_stock.
>DATA: ltmat2 TYPE TABLE OF lty_mat.
you have displayed above, however you are also using ls_stock and lv_stock .
>IF p_ztotal = ' '. "line
>WRITE 18 ls_stock-matnr.
>WRITE 38 lv_stock-strgr.
>
>ELSEIF ztotal = 'S'.                             "subtotal
    >WRITE: 15 ls_stock-nrmit.
    >WRITE 32 lv_stock-dispo.
    >WRITE 43 lv_stock-fevor.
>ELSE.                                            "total
    >WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
>
>ENDIF.
Are those for displaying some other information?
Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
Best Regards,
Rajesh.
Please reward points if found helpful.

Search help for SKAT-SAKNR OR SKAT-SAKNR is not working

Hi All,
I have created a Search Help for F4 in a dialog program for SKAT-SAKNR OR SKAT-SAKNR. While i click F4 on that field, it displays blank values.
Here is the module:
module HELP_FOR_SAPGL_ACC input.
CLEAR t_SAPGL.
SELECT SAKNR TXT20
    FROM SKAT
    INTO CORRESPONDING FIELDS OF TABLE t_SAPGL UP TO 1000 ROWS
    WHERE SPRAS = SY-LANGU.
   WHERE L_GL_ACC = v_FIELD_VALUE-FIELDVALUE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    DDIC_STRUCTURE         = ' '
      RETFIELD               = 'SAKNR'
    PVALKEY                = ' '
     DYNPPROG               = PROGNAME
     DYNPNR                 = DYNNUM
     DYNPROFIELD            = 'SKA1-SKANR'
    STEPL                  = 0
    WINDOW_TITLE           =
    VALUE                  = ' '
     VALUE_ORG              = 'S'
    MULTIPLE_CHOICE        = ' '
    DISPLAY                = ' '
    CALLBACK_PROGRAM       = ' '
    CALLBACK_FORM          = ' '
    MARK_TAB               =
IMPORTING
    USER_RESET             =
    TABLES
      VALUE_TAB              = t_SAPGL
    FIELD_TAB              =
    RETURN_TAB             =
    DYNPFLD_MAPPING        =
EXCEPTIONS
    PARAMETER_ERROR        = 1
    NO_VALUES_FOUND        = 2
    OTHERS                 = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endmodule.
In the above code I am selecting 1000 rows from SKAT table and in the Search Help Popup it is also displaying 1000 rows but all are blank.
Please help me.
Regards,
Avaneet

Hi check my weblog on search help exit codeing..
https://wiki.sdn.sap.com/wiki/x/du0
\* Prepare for output
CALL FUNCTION 'F4UT_RESULTS_MAP'
TABLES
shlp_tab = shlp_tab
record_tab = record_tab
source_tab = lt_result
CHANGING
shlp = shlp
callcontrol = callcontrol
EXCEPTIONS
illegal_structure = 1
OTHERS = 2.
IF rc = 0.
callcontrol-step = 'DISP'.
ELSE.

How to add a search help for a field in alv?

HI!Everyone ,
i want to add a search help created by myself for one field in alv,
and i want to use this function "HELP_VALUES_GET_WITH_TABLE".
can anyone help me ?
thanks!

HI,Vijay.
My code like this :
      PERFORM build_fcat.
      PERFORM build_objects.
      PERFORM layo_build.
      PERFORM set_drdn_table .
      CALL METHOD alv_grid->set_table_for_first_display
        EXPORTING
         i_structure_name = 'STU_S'
          is_layout        = s_layo
        CHANGING
          it_outtab        = itab_out
        it_fieldcatalog = i_fcat
        ."Period
      IF sy-subrc <> 0.
        EXIT.
      ENDIF.
for example, there is a field 'UNAME' IN Structure 'STU_S',
i want to add a search help for 'UNAME'.
the 'UNAME' is not users in SAP R/3 , i want to add some data by myself or from a table .

How to add search help for field in ALV object

Hello,
In a program, we use ALV object ( container) to create a liste like : field1, field2 .. but when display we do not have search help for this . Could you please help me how to add match code in this case for field 1 and field2, We use set_table_for_first_display
Thanks,

Hi,
when you define your field catalogue you can create data elements with search help in se11 and use them for field 1 and field 2.
But maybe it is enough to use data elements belonging to a domain with a value help and to set field F$AVAILABL in the field catalogue or to fill the name of the field CHECKTABLE.
Regards,
Klaus

How to get search help for 2nd parameter based on the 1st parameter value

Hi all!
   I have 2 parameters (material no, revision level). I have created a search help for revision level. It has an importing parameter :material no. and one exporting parameter : revision level.When I checked it, it's giving the revision values only for the specified.
In my report , I have kept these 2 materials in my selection screen.For revision level , I have added the matchcode object which I have created. When I pressed F4 for revision level, it's giving all the values irrespective of the material no. in the first parameter. How to solve it? Please suggest.

Hi,
Try this code filling internal table fields,
DATA: BEGIN OF values,
        OID TYPE ZCL_OBJECT-OBJECTID,
        ODEC TYPE ZCL_OBJECT-OBJECT_DESC,
       END OF values,
       W_FIELD(10).
DATA: ZCL_PROJECT-PROJECTID type zcl_project-projectid,
      ZCL_OBJECT-OBJECTID(5).
DATA: progname TYPE sy-repid,
      dynnum   TYPE sy-dynnr,
      dynpro_values TYPE TABLE OF dynpread,
      field_value LIKE LINE OF dynpro_values,
      values_tab LIKE TABLE OF values.
CALL SCREEN 100.
*&      Module VALUE_PROJECTID INPUT
      text
*MODULE VALUE_PROJECTID INPUT.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
      EXPORTING
           tabname     = 'ZCL_PROJECT'
           fieldname   = 'PROJECTID'
           dynpprog    = progname
           dynpnr      = dynnum
           dynprofield = 'ZCL_PROJECT-PROJECTID'.
*ENDMODULE.                 " VALUE_PROJECTID INPUT
*&      Module VALUE_OBJECTID INPUT
      text
MODULE VALUE_OBJECTID INPUT.
   CALL FUNCTION 'DYNP_VALUES_READ'
       EXPORTING
            dyname             = progname
            dynumb             = dynnum
            translate_to_upper = 'X'
       TABLES
            dynpfields         = dynpro_values.
READ TABLE dynpro_values INDEX 1 INTO field_value.
W_FIELD = FIELD_VALUE-FIELDVALUE.
SELECT OBJECTID
          OBJECT_DESC
    FROM ZCL_OBJECT
    INTO (VALUES-OID,
           VALUES-ODEC)
WHERE PROJECTID = FIELD_VALUE-FIELDVALUE.
   APPEND VALUES TO VALUES_TAB.
ENDSELECT.
   CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield    = 'OID'
            dynpprog    = progname
            dynpnr      = dynnum
            dynprofield = 'ZCL_OBJECT-OBJECTID'
            value_org   = 'S'
       TABLES
            value_tab   = values_tab.
ENDMODULE.                 " VALUE_OBJECTID INPUT
*&      Module INIT OUTPUT
      text
MODULE INIT OUTPUT.
progname = sy-repid.
dynnum   = sy-dynnr.
CLEAR: field_value, dynpro_values.
field_value-fieldname = 'ZCL_PROJECT-PROJECTID'.
APPEND field_value TO dynpro_values.
IF SY-UCOMM = 'BACK'.
    LEAVE program.
ENDIF.
IF SY-UCOMM = 'ANS'.
   LEAVE TO SCREEN '0'.
ENDIF.
ENDMODULE.                 " INIT OUTPUT
START-OF-SELECTION.
WRITE: / field_value-fieldvalue,
         W_FIELD.
LOOP AT VALUES_TAB INTO VALUES.
    WRITE / VALUES.
ENDLOOP.
if sy-subrc <> 0.
    WRITE / field_value-fieldvalue.
endif.
Plzz reward points if it helps

Enhancing standard (single select)search help for Multiple value selection

Hi,
Standard search help for Business Partner (in cProjects) allows only single value selection for input fields. I want to make this multiple selection.
Is there a way to do it.
I used an OVS and built a similar search but its difficult to get the standard options like saving to personal value list etc in it.
It would be good if there is a way to modify the standard search help to allow multiple selection. Any ideas??
Appreciate your help,
Thanks,
Sri
Edited by: Sri on Sep 9, 2010 8:50 PM
Edited by: Sri on Sep 9, 2010 8:52 PM

As far as I know you can't make a standard ABAP dictionary search help return multiple entries - where you get this sort of functionality the searches don't use the standard Elementary search help framework (e.g. organisational structure searches)
Given that the WDA search help relies on these dictionary based searches, I'd think very much that you couldn't enhance it to return multiple. how you could even return multiple entries into a single UI element input field is also confusing to me.
I'd suggest creating a freely programmed value help, it would certainly take quite some effort to recreate those personal value lists etc, but it could be done - I don't like OVS, but that just me.

One search help for multiple select-options in webdynpro abap

Hi,
I need a way to use one search help for multiple select-options fields. My scenario is :
I have a table for keeping different organizational units' values of different systems. I have pasted some sample data from this table at the end of this mail. On the screen I want to have 1 select-options filed for werks, and 1 select-options filed for vkorg. (In fact I will have more org. unit fields...) In the beginning of my application the user will select sid.
If the user selects ADS as SID, when he opens search-help for the first org. unit (werks), he will see the records with SID: ADS, VARBL = $WERKS, LANGU = SY-LANGU.
If the user selects AGT as SID, when he opens search-help for the second org. unit (vkorg), he will see the records with SID: AGT, VARBL = $VKORG, LANGU = SY-LANGU.
I have created a search-help taking SIDD, VARBL and LANGU as import parameters; used field mapping and bound this search help to my table. I have created 2 context nodes : org1 and org2 having attributes SID, VARBL, VALUE, LANGU .
I have assigned related SID, VARBL and Langu values to these attributes at runtime as I needed. That way, if I use input field and reference to the related context attributes org1-value and org2-value2 accordingly, search help works well as I want.
However, when I use select-options field , I can not bind the field to the context data. I can give reference only to ddic structure. Is there any way to reference to a context attribute? I searched for this in SDN, but could find nothing.
I think I won't be able to use this way. What do you say?
As I read from forums maybe using OVS help will be suitable for me. But I have to use one search-help for all select-options fields. Do you know how I can determine the active select-options field and pass its name (for instance "werks" ) as parameter to this OVS search help. (Also I'll pass SID and LANGU.)
MY TABLE (ZBYYT080) CONTENTS:
SID     VARBL     VALUE     LANGU     VTEXT
ADS     $WERKS     1     T     Werk 0001
ADS     $WERKS     11     T     OZYAS GIDA URETIM YERI
ADS     $WERKS     5501     T     BOYA GEBZE FABRİKASI
ADS     $WERKS     5502     T     BOYA CIGLI FABRİKASI
AGT     $WERKS     2301     T     KAMLI DAMIZLIK
AGT     $WERKS     9601     T     PANAR DENIZ URETIM YERI
ADS     $VKORG     22     T     AA KİMYASALLAR
ADS     $VKORG     8001     T     İINSAAT BOYALARI
AGT     $VKORG     6500     T     DAMk St.Org
AGT     $VKORG     5400     T     PANAR St.Org.
I wish I'm clear enough..
I will be gald if someone answers me as soon as possible...
Thanks İn advance..
MERAL

Hi,
Your ques is how to refer to a DDIC search help to refer to selection screen parameter ?
Am I right ?
If Yes, then in the interface IF_WD_SELECT_OPTIONS
method ADD_SELECTION_FIELD, ADD_PARAMETER_FIELD etc
have importing param like I_VALUE_HELP_TYPE and I_VALUE_HELP_ID, I_VALUE_HELP_MODE, I_VALUE_HELP_STRUCTURE
etc which may help you to link your create DDIC Search help to selection screen params.
this is just a clue from my side. I haven't tried it myself.
You can go to the where used list of this method and find some sample implementations which use these params.
Hope this helps.
Regards
Manas Dua

Search help for PLANT

Similar Messages

Maybe you are looking for