Search help for selection screen

Hi experts,
I have a selection screen - and the user want that the asearch help will be :
For example: Equi-eqtyp with search help: eqtyp_sh_wd or
equi-matnr with search help mat1.
how can i do this?
thanks,
Michal.

Hi, Michal
Are you talking about some thing like bellow ?
PARAMETERS: eqtyp TYPE equi-eqtyp MATCHCODE OBJECT eqtyp_sh_wd,
matnr TYPE equi-matnr MATCHCODE OBJECT mat1.
Please Reply if else.
Faisal

Similar Messages

Search help for selection screen field

Hi ,
steps for creating search help for a key field in selection screen..
tables is a userdefined from which the field is taken..
thxs,
vind

hi,
c this.
REPORT ZXYZ_0002 .
data: dynfields type table of dynpread with header line.
data: return type table of ddshretval with header line.
selection-screen begin of block b1 with frame title text-001 .
selection-screen begin of line.
PARAMETERS: P_BUKRS type T001-BUKRS.
selection-screen comment 30(20) BUTXT for field p_bukrs.
selection-screen end of line.
selection-screen end of block b1.
at selection-screen output.
if butxt is initial.
   select single butxt into butxt
         from t001
        where bukrs = p_bukrs.
endif.
at selection-screen on value-request for p_bukrs.
call function 'F4IF_FIELD_VALUE_REQUEST'
       exporting
            tabname           = 'T001'
            fieldname         = 'BUKRS'
            dynpprog          = sy-cprog
            dynpnr            = sy-dynnr
            dynprofield       = 'P_BUKRS'
       tables
            return_tab        = return
       exceptions
            field_not_found   = 1
            no_help_for_field = 2
            inconsistent_help = 3
            no_values_found   = 4
            others            = 5.
read table return with key fieldname = 'P_BUKRS'.
Add it back to the dynpro.
dynfields-fieldname = return-retfield.
dynfields-fieldvalue = return-fieldval.
append dynfields.
Get the company code from db and add to dynpro
data: xt001 type t001.
clear xt001.
select single * into xt001
         from t001
        where bukrs = return-fieldval.
dynfields-fieldname = 'BUTXT'.
dynfields-fieldvalue = xt001-butxt.
append dynfields.
Update the dynpro values.
call function 'DYNP_VALUES_UPDATE'
       exporting
            dyname     = sy-cprog
            dynumb     = sy-dynnr
       tables
            dynpfields = dynfields
       exceptions
            others     = 8.
start-of-selection.
rgsds
anver
if hlped mark points

Search Help for selection screen select-option

Hi Friends,
 I want have search help for KSCHL with only the condition types starting with Z. I need your help to do that.
Thanks in Advance.

hi,
chek a sample code, for restricting the serach help.
REPORT Z_CONECT_A.
Include type pool SSCR
TYPE-POOLS sscr.
TABLES : marc.
defining the selection-screen
select-options :
s_matnr for marc-matnr,
s_werks for marc-werks.
Define the object to be passed to the RESTRICTION parameter
DATA restrict TYPE sscr_restrict.
Auxiliary objects for filling RESTRICT
DATA : optlist TYPE sscr_opt_list,
 *** type sscr_***.
INITIALIZATION.
Restricting the MATNR selection to only EQ and 'BT'.
optlist-name = 'OBJECTKEY1'.
optlist-options-eq = 'X'.
optlist-options-bt = 'X'.
APPEND optlist TO restrict-opt_list_tab.
***-kind = 'S'.
***-name = 'S_MATNR'.
***-sg_main = 'I'.
***-sg_addy = space.
***-op_main = 'OBJECTKEY1'.
APPEND *** TO restrict-***_tab.
Restricting the WERKS selection to CP, GE, LT, NE.
optlist-name = 'OBJECTKEY2'.
optlist-options-cp = 'X'.
optlist-options-ge = 'X'.
optlist-options-lt = 'X'.
optlist-options-ne = 'X'.
APPEND optlist TO restrict-opt_list_tab.
***-kind = 'S'.
***-name = 'S_WERKS'.
***-sg_main = 'I'.
***-sg_addy = space.
***-op_main = 'OBJECTKEY2'.
APPEND *** TO restrict-***_tab.
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
 EXPORTING
 restriction = restrict
 EXCEPTIONS
 TOO_LATE = 1
 REPEATED = 2
 SELOPT_WITHOUT_OPTIONS = 3
 SELOPT_WITHOUT_SIGNS = 4
 INVALID_SIGN = 5
 EMPTY_OPTION_LIST = 6
 INVALID_KIND = 7
 REPEATED_KIND_A = 8
 OTHERS = 9
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
regards
anver
if helped pls mark points

Search help in selection screens for interactive report

A search help can only be assigned to DB table.
So my doubt is can it also be used for seletion screens created for an interactive report?
If yes what is the procedure.. Please give me one example at least...
waiting for your valuable suggestions.....
Thanks,
regards,
Chinmay

Hi Chinmay,
I suppose your requirement is to give search help to selection screen elements.
Here is the code.
REPORT ZSHAIL_F4HELP .
parameters: name(10) type c .
TYPES: BEGIN OF VALUES,
 CARRID TYPE SPFLI-CARRID,
 CONNID TYPE SPFLI-CONNID,
 END OF VALUES.
dATA: PROGNAME LIKE SY-REPID,
 DYNNUM LIKE SY-DYNNR,
 DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
 FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
 VALUES_TAB TYPE TABLE OF VALUES.
at selection-screen on value-request for name.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
 tabname = 'DEMOF4HELP'
 fieldname = 'CARRIER1'
SEARCHHELP = ' '
SHLPPARAM = ' '
 DYNPPROG = PROGNAME
 DYNPNR = DYNNUM
 DYNPROFIELD = 'CARRIER'
STEPL = 0
VALUE = ' '
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
SUPPRESS_RECORDLIST = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
SELECTION_SCREEN = ' '
IMPORTING
USER_RESET =
TABLES
RETURN_TAB =
EXCEPTIONS
 FIELD_NOT_FOUND = 1
 NO_HELP_FOR_FIELD = 2
 INCONSISTENT_HELP = 3
 NO_VALUES_FOUND = 4
 OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
AT SELECTION-SCREEN OUTPUT.
PROGNAME = SY-REPID.
DYNNUM = SY-DYNNR.
CLEAR: FIELD_VALUE, DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'CARRIER'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
I hope your query is solved.
If so,please award points.
Regards,
Sylendra.

How to create an search help for standard Screen

Hi,
Can any one help me out ... How to create a search help for standard screen field.......
thanks & regards,
Naveen...

Hi Naveen.
I would like to suggest a couple of references,
[SDN - Standard Reference for create a search help for own fields in selection screen |How to create a search help for my own fields in selection screen;
[SDN - Standard Reference for Attaching search help to standard screen|Attach search help to standard screen;
[SDN - Reference for want to add a field in standard search help screen|want to add a field in standard search help screen;
[SDN - Reference for Attaching a search help to a standard screen - Case 2 |attaching a search help to a standard screen;
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

Problem on Search Help for select-option

Hi,
Iam working on a search help for select-option,
is there a way to incorporate select-all or multiple
selection on this?
Thanks!

Hi catherine,
1. Just copy paste this program.
(It will POPULATE the SELECT-OPTION,
   based upon
   MULTIPLE Selection,
   selected by the user,
   in the help provided thru F4IF_INT_TABLE_VALUE_REQUEST.)
2. Eg. is for BUKRS (company code)
3.
REPORT ABC.
TABLES : T001.
DATA : ITAB LIKE TABLE OF T001 WITH HEADER LINE.
DATA : RETURN LIKE TABLE OF DDSHRETVAL WITH HEADER LINE.
SELECT-OPTIONS : BUKRS FOR T001-BUKRS.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR BUKRS-LOW.
PERFORM MYPOPULATE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR BUKRS-HIGH.
PERFORM MYPOPULATE.
FORM MYPOPULATE.
REFRESH ITAB.
SELECT * FROM T001 INTO TABLE ITAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'BUKRS'
      dynprofield     = 'BUKRS'
      dynpprog        = sy-REPID
      dynpnr          = sy-dynnr
      multiple_choice = 'X'
      value_org       = 'S'
    TABLES
      value_tab       = ITAB
      return_tab      = return.
IF RETURN[] IS NOT INITIAL.
REFRESH BUKRS.
CLEAR BUKRS.
LOOP AT RETURN.
    BUKRS-SIGN = 'I'.
    BUKRS-OPTION = 'EQ'.
    BUKRS-LOW = RETURN-FIELDVAL.
    BUKRS-HIGH = RETURN-FIELDVAL.
    APPEND BUKRS.
ENDLOOP.
ENDIF.
ENDFORM.
regards,
amit m.

Regarding Search help on selection-screen field

Hi there,
I am working on custom tables.
I have a requirement to maintain search pattern on a selection-screen field.
selection-screen parameter: p_name which is company name filed from Z table.
By giving a string like Holl* and by pressing F4 on the field p_name it has to popup a dialogbox having list of company names starting with Holl.
Thanks in advance.
-Tulasi

Hi
Go through the link given below :
How to create a search help for my own fields in selection screen
F4 search help on report selection screen
also try :
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'VKORG'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_VKORG'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'C'
TABLES
VALUE_TAB = T_TABLE1
FIELD_TAB = field_tab
RETURN_TAB = RET_TAB
DYNPFLD_MAPPING = DYN_TAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
With Regards
Nikunj shah

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

Search help for select options

Hi,
I want to give search help for a field on selection screen based on value in another field in same selection screen. I am using DYNP_VALUES_READ function module to retain the values and F4IF_INT_TABLE_VALUE_REQUEST function module to give search help and it works fine, but when i give multiple selections i am not able to read the values. Please help. Points will be rewarded.

Hi,
Check the below code.
tables: t001k.
For Identification Number
DATA: BEGIN OF it_bwkey OCCURS 0,
 bwkey LIKE t001k-bwkey,
 END OF it_bwkey.
data: v_bukrs(4).
For Run date
DATA: BEGIN OF it_bukrs OCCURS 0,
 bukrs LIKE t001k-bukrs,
 END OF it_bukrs.
DATA it_ret LIKE ddshretval OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN: BEGIN OF BLOCK main WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS: p_bukrs(4) TYPE c.
SELECT-OPTIONS s_bwkey FOR t001k-bwkey NO INTERVALS.
SELECTION-SCREEN END OF BLOCK main.
Validation Section
INITIALIZATION.
SELECT DISTINCT bukrs FROM t001k INTO TABLE it_bukrs.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_bukrs.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'BUKRS'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 dynprofield = 'P_BUKRS'
 value_org = 'S'
 TABLES
 value_tab = it_bukrs
 EXCEPTIONS
 parameter_error = 1
 no_values_found = 2
 OTHERS = 3.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_bwkey-low.
TABLES: t130r.
DATA: BEGIN OF dynpfields OCCURS 0. "Hilfsstruktur zum auslesen des
 INCLUDE STRUCTURE dynpread. "Feldwertes vom Dynpro bei >F4<
DATA: END OF dynpfields.
DATA : sy_repid LIKE sy-repid,
 sy_dynnr LIKE sy-dynnr.
CLEAR dynpfields.
REFRESH dynpfields.
dynpfields-fieldname = 'P_BUKRS'.
APPEND dynpfields.
Lesen des akt. Wertes von Dynpro
sy_repid = sy-repid.
sy_dynnr = sy-dynnr.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy_repid
 dynumb = sy_dynnr
 TABLES
 dynpfields = dynpfields
 EXCEPTIONS
 OTHERS = 01.
IF sy-subrc = 0.
 READ TABLE dynpfields WITH KEY fieldname = 'P_BUKRS'.
 IF sy-subrc = 0.
 v_bukrs = dynpfields-fieldvalue.
 ENDIF.
ENDIF.
SELECT bwkey FROM t001k
INTO TABLE it_bwkey
WHERE bukrs = v_bukrs.
DELETE ADJACENT DUPLICATES FROM it_bwkey.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'BWKEY'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 dynprofield = 'S_BWKEY'
 value_org = 'S'
 TABLES
 value_tab = it_bwkey
 EXCEPTIONS
 parameter_error = 1
 no_values_found = 2
 OTHERS = 3.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.

SEARCH HELP FOR SELECT PTIONS IN REPORTS

hI,
I HAVE ONE SELECT-OPTION FOR ZTSH-TSMONTH. HOW CAN I SET SEARCH HELP FOR THAT
SHYJA

Hi Sihya,
You can create search help in 2 ways:::
1) Goto SE11 and create search help with any name ZSRCHELP.
For reference u can see some standard search help like H_T530E for field PREAS in table PA0002.
Now go to SE11 in table ZTSH, u can find the tab for search help, select your field TSMONTH, and click on search help tab and give the name of search help u created.
Now activate it.
Now u goto ur report u will find search help will be shown for that parameter.
2)See the report below
TABLES: mara, makt.
DATA mat LIKE mara-matnr.
DATA: BEGIN OF itab OCCURS 0,
matnr LIKE mara-matnr,
END OF itab.
DATA : BEGIN OF btab OCCURS 0,
maktx LIKE makt-maktx,
END OF btab.
DATA : return LIKE ddshretval OCCURS 0 WITH HEADER LINE.
SELECT-OPTIONS: so_matnr FOR mara-matnr,
so_maktx FOR makt-maktx.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR so_matnr-low.
PERFORM matnr.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR so_matnr-high.
PERFORM matnr.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR so_maktx-low.
PERFORM maktx.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR so_maktx-high.
PERFORM maktx.
*& Form matnr
text
FORM matnr.
REFRESH itab.
SELECT matnr FROM mara INTO TABLE itab.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'MATNR '
dynprofield = 'P_MATNR '
dynpprog = sy-repid
dynpnr = sy-dynnr
value_org = 'S'
TABLES
value_tab = itab
return_tab = return.
mat = return-fieldval.
UNPACK mat TO mat.
so_matnr = return-fieldval.
REFRESH return.
CLEAR return.
ENDFORM. "matnr
*& Form maktx
text
FORM maktx.
REFRESH btab.
SELECT maktx FROM makt INTO TABLE btab WHERE matnr = mat AND spras =
sy-langu.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'MAKTX'
dynprofield = 'SO_MAKTX '
dynpprog = sy-repid
dynpnr = sy-dynnr
value_org = 'S'
TABLES
value_tab = btab
return_tab = return.
so_maktx = return-fieldval.
REFRESH return.
CLEAR return.
ENDFORM. "maktx
KINDLY REWARD IF USEFUL
ROHIT G

Assign search help for a screen field in standard program?

Hi All,
Is there any other way to assign search help to a standard SAP screen field? (to be precise i want to assign search help to Recipient field in table control of components tab in transaction IW32/IW31)
I know we can do this by assigning search help through screen painter (by changing standard program, which is my last option).
Any advice/help will be greatly appreciated.

Hi,
I think you will find solution in below threads:
Re: Search Help for standard field
How to assign a search help
Search help for Standard SAP field
Reward if helpful
Rgds,

Search help on selection screen.

I have a selection screen with
Report name
Variant name
Variant fields
Variant fields is attached to a search help 'Z_Search_variant' and this search help fetches values based on "Report name" "Variant name" on the selection screen.
I am using
AT SELECTION-SCREEN ON VALUE-REQUEST FOR Variant_field
PERFORM f4_help_variant.
FORM f4_help_variant.
call function 'F4IF_FIELD_VALUE_REQUEST'
exporting
   tabname                   = space
   fieldname                 = space
   SEARCHHELP                = 'Z_SEARCH_VARIANT'
SHLPPARAM                 = 'REPORT'
DYNPPROG                  = ' '
DYNPNR                    = ' '
DYNPROFIELD               = ' '
STEPL                     = 0
VALUE                     = Report
MULTIPLE_CHOICE           = ' '
DISPLAY                   = ' '
   SUPPRESS_RECORDLIST       = 'X'
   CALLBACK_PROGRAM          = SY-REPID
CALLBACK_FORM             = ' '
SELECTION_SCREEN          = ' '
IMPORTING
USER_RESET                =
TABLES
    RETURN_TAB                = return_tab
EXCEPTIONS
FIELD_NOT_FOUND           = 1
NO_HELP_FOR_FIELD         = 2
INCONSISTENT_HELP         = 3
NO_VALUES_FOUND           = 4
OTHERS                    = 5
How do I pass value to this search help? Currently I do not see this FM allowing this option? Any other options?

Hi Vinita,
wat i figured out from your problem is u need how to get values from FM so u can do it in this way..
READ TABLE it_return INTO wa_return INDEX 1.
IF sy-subrc = 0.
    wa_output-vkorg = wa_return-fieldval.
ENDIF.
IF wa_output-vkorg IS NOT INITIAL.
    MODIFY it_output FROM wa_output INDEX row_id   * it_output is final ITAB
              TRANSPORTING vkorg.
ENDIF.
CALL METHOD c_alv->refresh_table_display.
CLEAR: wa_return,it_return[],wa_output.

Need help on search help on selection screen field

Hi guyz,
Please tell me how to pass the parameter or restrict the below search help.
*s_bsart FOR ekko-bsart . " Doc. Type*
For the above selection screen field i need to display the data only for cat = F if i click search help.
Thanks,
Mohamed Kaleel

Hi,
Use At selection-screen for value-request for s_bsart.
SELECT_OTPIONS: s_bsart FOR ekko-bsart.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_bsart.
CALL SCREEN 100 STARTING AT 10 5
ENDING AT 50 10.
MODULE value_list OUTPUT.
SUPPRESS DIALOG.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
SET PF-STATUS space.
NEW-PAGE NO-TITLE.
s_bsart-low = 'F' / 'CAT=F'.
write :/ s_bsart-low.
Hide: s_bsart-low
clear s_bsart-low.
ENDMODULE.
AT LINE-SELECTION.
LEAVE TO SCREEN 0.
This will resolve the issue.
Regards,
Gurpreet

Dynamic Search-help in Selection Screen Parameter

Hi,
Please can you provide some solution for the below requirements.
I have 2 fields ( Organization channel and Team ) in my selection screen. Under one organization channel there can be many teams.
And I am trying a dynamic search help on both the fields using event AT selection-screen on Value request and
FM 'F4IF_INT_TABLE_VALUE_REQUEST'.
But I am facing the below issue .
First I am giving some values in field 'Organization channel' . Then I am clicking on F4 button on my 2nd field 'Team' .
and in debugging mode under the event 'At selection-screen on value request', Select option SO_Team is blank.
The value provided in the Organiozation channel is not being captured in SO_TEAM-Low
Please have a look on the below codes.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR so_team-low .
if not so_orgchannel-low is initial.      "Here so_orgchannel-low value is coming as Zeros.
select * from HRP1001 into table GT_HRP1001
          where objid = so_orgchannel-low.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
         EXPORTING
              retfield        = 'ORGID'
              value_org       = 'S'
              dynpprog        = 'ZTEST'
              dynpnr          = '1000'
         TABLES
              value_tab       = gt_hrp1001
         EXCEPTIONS
              parameter_error = 1
              no_values_found = 2
              OTHERS          = 3.

Hi,
AT SELECTION-SCREEN ON VALUE-REQUEST FOR so_team-low .
"Add This Begin
CLEAR t_dynpfields.
REFRESH t_dynpfields.
t_dynpfields-fieldname = 'SO_ORGCHANNEL-LOW'.
APPEND t_dynpfields.
w_repid = sy-repid.
* reading Screen variables and Values
CALL FUNCTION 'DYNP_VALUES_READ'
       EXPORTING
            dyname     = w_repid
            dynumb     = sy-dynnr
       TABLES
            dynpfields = t_dynpfields
       EXCEPTIONS
            OTHERS.
READ TABLE t_dynpfields INDEX 1.
so_orgchannel-low = t_dynpfields-fieldvalue.
"Add this End
if not so_orgchannel-low is initial.      "Your code is here
select * from HRP1001 into table GT_HRP1001
           where objid = so_orgchannel-low.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
          EXPORTING
               retfield        = 'ORGID'
               value_org       = 'S'
               dynpprog        = 'ZTEST'
               dynpnr          = '1000'
          TABLES
               value_tab       = gt_hrp1001
          EXCEPTIONS
               parameter_error = 1
               no_values_found = 2
               OTHERS          = 3.
Regards,
Prabhudas

Hi Experts, a question about search help in selection screen?

Hi Experts,
I have a selection screen and two parameters, one is plant and another is material, what I want is as following:
the user select a plant and when he select the material the material should be in the plant he has filled in, how can I handle this? detail help, thank you in advance.
Kind regards
Dawson

Hi,
Check the below code.
tables: t001k.
For Identification Number
DATA: BEGIN OF it_bwkey OCCURS 0,
 bwkey LIKE t001k-bwkey,
 END OF it_bwkey.
data: v_bukrs(4).
For Run date
DATA: BEGIN OF it_bukrs OCCURS 0,
 bukrs LIKE t001k-bukrs,
 END OF it_bukrs.
DATA it_ret LIKE ddshretval OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN: BEGIN OF BLOCK main WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS: p_bukrs(4) TYPE c.
SELECT-OPTIONS s_bwkey FOR t001k-bwkey NO INTERVALS.
SELECTION-SCREEN END OF BLOCK main.
INITIALIZATION.
SELECT DISTINCT bukrs FROM t001k INTO TABLE it_bukrs.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_bukrs.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING retfield = 'BUKRS'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'P_BUKRS'
value_org = 'S'
TABLES value_tab = it_bukrs
EXCEPTIONS parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_bwkey-low.
TABLES: t130r.
DATA: BEGIN OF dynpfields OCCURS 0.
INCLUDE STRUCTURE dynpread.
DATA: END OF dynpfields.
DATA : sy_repid LIKE sy-repid,
 sy_dynnr LIKE sy-dynnr.
CLEAR dynpfields.
REFRESH dynpfields.
dynpfields-fieldname = 'P_BUKRS'.
APPEND dynpfields.
sy_repid = sy-repid.
sy_dynnr = sy-dynnr.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy_repid
dynumb = sy_dynnr
TABLES
dynpfields = dynpfields
EXCEPTIONS
OTHERS = 01.
IF sy-subrc = 0.
READ TABLE dynpfields WITH KEY fieldname = 'P_BUKRS'.
IF sy-subrc = 0.
v_bukrs = dynpfields-fieldvalue.
ENDIF.
ENDIF.
SELECT bwkey FROM t001k INTO TABLE it_bwkey WHERE bukrs = v_bukrs.
DELETE ADJACENT DUPLICATES FROM it_bwkey.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BWKEY'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'S_BWKEY'
value_org = 'S'
TABLES
value_tab = it_bwkey
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
*MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Regards,
Kumar Bandanadham

Search help for selection screen

Similar Messages

Maybe you are looking for