Search Help for vendor

I need to create a search help for vendor. I mean if i press F4, it should display vendor code along with name . Can anybody help me to create a search help and to assign it to vendor code.
Thanks in advance..

You need to call the following function on value help of your field.
  call function 'F4IF_FIELD_VALUE_REQUEST'
    exporting
      tabname                   = 'LFA1'
      fieldname                 = 'LIFNR'
      searchhelp                = 'KRED'
      dynpprog                  = <your program name from where you are calling this function>
      dynpnr                    = <your program screen number>
      dynprofield               = '<screen field name>'
      value                     = 'S*'
  if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
  endif.
Hope this helps.
Regards
Raja

Similar Messages

  • Search Help for Vendor Feild not getting populated in the Screen Element

    Hi Everyone,
    In transaction Miro, I get a POP-UP for Invoicing Party i.e. Vendor and Users required a custom search help.
    The Search help for Vendor(LIFNR) is KRED_C and i appended a Z search help under this.
    Now that the search help exists and I can drill down the values too but when i select/choose any value,  that value is not getting populated in Screen feild.
    is there any validation I need to do for this.
    Please suggest me... I checked SDN there are many things but i couldn't figure out wat i need to do and where I need to modify.
    Regards,
    Raj

    Dear Hema,
    Could you please tell me how many internal tables you are using to store the data for display.
    I observerd that you have lt_stock and lt_mat2 declared in the part of the program
    >DATA: lv_stock TYPE lty_stock.
    >DATA: ltmat2 TYPE TABLE OF lty_mat.
    you have displayed above, however you are also using ls_stock and lv_stock .
    >IF p_ztotal = ' '. "line
    >WRITE 18 ls_stock-matnr.
    >WRITE 38 lv_stock-strgr.
    >
    >ELSEIF ztotal = 'S'.                             "subtotal
        >WRITE: 15 ls_stock-nrmit.
        >WRITE 32 lv_stock-dispo.                    
        >WRITE 43 lv_stock-fevor.                      
      >ELSE.                                            "total
        >WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
    >
      >ENDIF.
    Are those for displaying some other information?
    Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
    Best Regards,
    Rajesh.
    Please reward points if found helpful.

  • Company code to be displayed in search help for vendors/Business partners

    Hi,
    We have a requirement to display the company code along with the vendor/business partner number when searching for preferred vendors while creating the shopping cart.
    In standard the search help exit used is BBP_F4IF_SHLP_EXIT_SOS. This search help does not have logic to find the company code for the vendor/business partner. It only finds and displays the purchasing organization.
    Can someone tell me where I find the company code agains the vendor?
    I tried searching in SRM and couldnt find the table where this relationship is found.
    Or is it that this data is not stored in SRM and we need to make an RFC call to R/3 using FM B470_VENDOR_GET_DATA.
    Please let me know!
    Thanks,
    Srivatsan

    I have the same problem due to multiple backends and 1 purchasing org to 2 company codes, have you got a fix for this yet would appricieate help if any one has ideas on this one
    Tom May
    <removed by moderator>

  • Search Help for Standard fieldBSEG-ZUONR

    Hi Guys,
    I am working on the standard transaction FB60 for vendor invoice posting.In this transaction item level we have the field Assignment Number BSEG-ZUONR.
    I need to provide the search help for this field.In SAP we don't have search help for this field.
    Please suggest me the best way to provide the search help for this.
    Is it possible to provide the search help through the transaction variant.
    Regards,
    Ramesh
    Moderator message - Cross post locked
    Edited by: Rob Burbank on Jun 19, 2009 9:51 AM

    Hi,
    May be you can refer to the following link
    [Search help enhancement in VA01;
    Regards,
    Mahesh

  • Search help for standard field BASEG-ZUONR

    Hi Guys,
    I am working on the standard transaction FB60 for vendor invoice posting.In this transaction item level we have the field Assignment Number BSEG-ZUONR.
    I need to provide the search help for this field.In SAP we don't have search help for this field.
    Please suggest me the best way to provide the search help for this.
    Is it possible to provide the search help through the transaction variant.
    Regards,
    Ramesh

    Hi,
    May be you can refer to the following link
    [Search help enhancement in VA01;
    Regards,
    Mahesh

  • SRS Search Help for Articles

    I've had a request to add a vendor characteristic to the list that is generated by the SRS Search Help for Articles.
    Currently is is displaying just the article number and the article description.
    I found the BAdI - WSRS_MAT_KEY_SRC.  It is called during the search help.  The method WSRS_MATKEY_PBO_SUBSCREEN provides an internal table with the articles that matched the search criteria.  In addition to the article number and description are the UPC/EAN, Vendor Article Number and "Long article number for SAP Retail Store".  None of these fields are being populated.  When I enter, during debug, values into these fields, they are not displayed.  (Only the article number and description are being displayed.)
    Does anyone know where this search output list is configured?  Although I have found the actual article display for SRS in SPRO/IMG, I did not find where the search output list is configured.
    Thanks,
    Deb

    Hi,
    It seems like you need to go for C++ custom Addin  Devlopment.
    Regards,
    Anil.

  • Search help for customer

    Hi Guys,
    My requirement is to create a search help for the customer field. The selection need to be restricted on Vendor maser(LFA1). When the user press on F4, he should get the list of all customers maintained in LFA1 table. The existing search help (DEBI) is having so many tabs and user doesn't want it. So, when we press on F4, the list of customers which are maintained in LFA1 should appear.
    Points assured.
    Cheers

    try
    Search Help DEBIA
    Edited by: Sukriti Saha on Oct 22, 2008 10:26 PM

  • Creating search help for a field in AdHoc Query

    Hi
    We have created an infoset based on LDB PCH.
    (The infoset contains object type O only).
    For the object-id field the users want search help when choosing this field for selection.
    Using "start via selection screen" does not give a good solution.
    Can anyone explain how I can create search help for fields in an infoset?
    Regards
    Kirsten

    Hi
    We have created an infoset based on LDB PCH.
    (The infoset contains object type O only).
    For the object-id field the users want search help when choosing this field for selection.
    Using "start via selection screen" does not give a good solution.
    Can anyone explain how I can create search help for fields in an infoset?
    Regards
    Kirsten

  • Search help for SKAT-SAKNR OR SKAT-SAKNR is not working

    Hi All,
    I have created a Search Help for F4 in a dialog program for SKAT-SAKNR OR SKAT-SAKNR. While i click F4 on that field, it displays blank values.
    Here is the module:
    module HELP_FOR_SAPGL_ACC input.
      CLEAR t_SAPGL.
      SELECT  SAKNR TXT20
        FROM  SKAT
        INTO  CORRESPONDING FIELDS OF TABLE t_SAPGL UP TO 1000 ROWS
        WHERE SPRAS = SY-LANGU.
       WHERE L_GL_ACC = v_FIELD_VALUE-FIELDVALUE.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
        DDIC_STRUCTURE         = ' '
          RETFIELD               = 'SAKNR'
        PVALKEY                = ' '
         DYNPPROG               = PROGNAME
         DYNPNR                 = DYNNUM
         DYNPROFIELD            = 'SKA1-SKANR'
        STEPL                  = 0
        WINDOW_TITLE           =
        VALUE                  = ' '
         VALUE_ORG              = 'S'
        MULTIPLE_CHOICE        = ' '
        DISPLAY                = ' '
        CALLBACK_PROGRAM       = ' '
        CALLBACK_FORM          = ' '
        MARK_TAB               =
      IMPORTING
        USER_RESET             =
        TABLES
          VALUE_TAB              = t_SAPGL
        FIELD_TAB              =
        RETURN_TAB             =
        DYNPFLD_MAPPING        =
      EXCEPTIONS
        PARAMETER_ERROR        = 1
        NO_VALUES_FOUND        = 2
        OTHERS                 = 3
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    endmodule.   
    In the above code I am selecting 1000 rows from SKAT table and in the Search Help Popup it is also displaying 1000 rows but all are blank.
    Please help me.
    Regards,
    Avaneet

    Hi check my weblog on search help exit codeing..
    https://wiki.sdn.sap.com/wiki/x/du0
    \* Prepare for output
    CALL FUNCTION 'F4UT_RESULTS_MAP'
    TABLES
    shlp_tab = shlp_tab
    record_tab = record_tab
    source_tab = lt_result
    CHANGING
    shlp = shlp
    callcontrol = callcontrol
    EXCEPTIONS
    illegal_structure = 1
    OTHERS = 2.
    IF rc = 0.
    callcontrol-step = 'DISP'.
    ELSE.

  • How to add a search help for a field in alv?

    HI!Everyone ,
    i want to add a search help created by myself for one field in alv,
    and i want to use this function "HELP_VALUES_GET_WITH_TABLE".
    can anyone help me ?
    thanks!

    HI,Vijay.
    My code like this :
          PERFORM build_fcat.
          PERFORM build_objects.
          PERFORM layo_build.
          PERFORM set_drdn_table .
          CALL METHOD alv_grid->set_table_for_first_display
            EXPORTING
             i_structure_name = 'STU_S'
              is_layout        = s_layo
            CHANGING
              it_outtab        = itab_out
            it_fieldcatalog  = i_fcat
            ."Period
          IF sy-subrc <> 0.
            EXIT.
          ENDIF.
    for example, there is a field 'UNAME' IN Structure 'STU_S',
    i want to add a search help for 'UNAME'.
    the 'UNAME'  is not users in SAP R/3 , i want to add some data by myself or from a table .

  • How to add search help for field in ALV object

    Hello,
    In a program, we use ALV object ( container) to create a liste like : field1, field2 .. but when display we do not have search help for this . Could you please help me how to add match code in this case for field 1 and field2, We use set_table_for_first_display
    Thanks,

    Hi,
    when you define your field catalogue you can create data elements with search help in se11 and use them for field 1 and field 2.
    But maybe it is enough to use data elements belonging to a domain with a value help and to set field F$AVAILABL in the field catalogue or to fill the name of the field CHECKTABLE.
    Regards,
    Klaus

  • How to get search help for 2nd  parameter based on the 1st parameter value

    Hi all!
       I have 2 parameters (material no, revision level). I have created a search help for revision level. It has an importing parameter :material no. and one exporting parameter : revision level.When I checked it, it's giving the revision values only for the specified.
    In my report , I have kept these 2 materials in my selection screen.For revision level , I have added the matchcode object which I have created. When I  pressed F4 for revision level, it's giving all the values irrespective of the material no. in the first parameter. How to solve it? Please suggest.

    Hi,
    Try this code filling internal table fields,
    DATA: BEGIN OF values,
            OID TYPE ZCL_OBJECT-OBJECTID,
            ODEC TYPE ZCL_OBJECT-OBJECT_DESC,
           END OF values,
           W_FIELD(10).
    DATA: ZCL_PROJECT-PROJECTID type zcl_project-projectid,
          ZCL_OBJECT-OBJECTID(5).
    DATA: progname TYPE sy-repid,
          dynnum   TYPE sy-dynnr,
          dynpro_values TYPE TABLE OF dynpread,
          field_value LIKE LINE OF dynpro_values,
          values_tab LIKE TABLE OF values.
    CALL SCREEN 100.
    *&      Module  VALUE_PROJECTID  INPUT
          text
    *MODULE VALUE_PROJECTID INPUT.
    CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
          EXPORTING
               tabname     = 'ZCL_PROJECT'
               fieldname   = 'PROJECTID'
               dynpprog    = progname
               dynpnr      = dynnum
               dynprofield = 'ZCL_PROJECT-PROJECTID'.
    *ENDMODULE.                 " VALUE_PROJECTID  INPUT
    *&      Module  VALUE_OBJECTID  INPUT
          text
    MODULE VALUE_OBJECTID INPUT.
       CALL FUNCTION 'DYNP_VALUES_READ'
           EXPORTING
                dyname             = progname
                dynumb             = dynnum
                translate_to_upper = 'X'
           TABLES
                dynpfields         = dynpro_values.
      READ TABLE dynpro_values INDEX 1 INTO field_value.
    W_FIELD = FIELD_VALUE-FIELDVALUE.
      SELECT  OBJECTID
              OBJECT_DESC
        FROM  ZCL_OBJECT
        INTO  (VALUES-OID,
               VALUES-ODEC)
    WHERE PROJECTID = FIELD_VALUE-FIELDVALUE.
       APPEND VALUES TO VALUES_TAB.
    ENDSELECT.
       CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
           EXPORTING
                retfield    = 'OID'
                dynpprog    = progname
                dynpnr      = dynnum
                dynprofield = 'ZCL_OBJECT-OBJECTID'
                value_org   = 'S'
           TABLES
                value_tab   = values_tab.
    ENDMODULE.                 " VALUE_OBJECTID  INPUT
    *&      Module  INIT  OUTPUT
          text
    MODULE INIT OUTPUT.
      progname = sy-repid.
      dynnum   = sy-dynnr.
      CLEAR: field_value, dynpro_values.
      field_value-fieldname = 'ZCL_PROJECT-PROJECTID'.
      APPEND field_value TO dynpro_values.
      IF SY-UCOMM = 'BACK'.
        LEAVE program.
    ENDIF.
    IF SY-UCOMM = 'ANS'.
       LEAVE  TO SCREEN  '0'.
    ENDIF.
    ENDMODULE.                 " INIT  OUTPUT
    START-OF-SELECTION.
    WRITE: / field_value-fieldvalue,
             W_FIELD.
      LOOP AT VALUES_TAB INTO VALUES.
        WRITE / VALUES.
      ENDLOOP.
      if sy-subrc <> 0.
        WRITE / field_value-fieldvalue.
      endif.
    Plzz reward points if it helps

  • Enhancing standard (single select)search help for Multiple value selection

    Hi,
    Standard search help for Business Partner (in cProjects) allows only single value selection for input fields. I want to make this multiple selection.
    Is there a way to do it.
    I used an OVS and built a similar search but its difficult to get the standard options like saving to personal value list etc in it.
    It would be good if there is a way to modify the standard search help to allow multiple selection. Any ideas??
    Appreciate your help,
    Thanks,
    Sri
    Edited by: Sri on Sep 9, 2010 8:50 PM
    Edited by: Sri on Sep 9, 2010 8:52 PM

    As far as I know you can't make a standard ABAP dictionary search help return multiple entries - where you get this sort of functionality the searches don't use the standard Elementary search help framework (e.g. organisational structure searches)
    Given that the WDA search help relies on these dictionary based searches, I'd think very much that you couldn't enhance it to return multiple. how you could even return multiple entries into a single UI element input field is also confusing to me.
    I'd suggest creating a freely programmed value help, it would certainly take quite some effort to recreate those personal value lists etc, but it could be done - I don't like OVS, but that just me.

  • One search help for multiple select-options in webdynpro abap

    Hi,
    I need a way to use one search help for multiple select-options fields. My scenario is :
    I have a table for keeping different organizational units' values of different systems. I have pasted some sample data from this table at the end of this mail. On the screen I want to have 1 select-options filed for werks, and 1 select-options filed for vkorg. (In fact I will have more org. unit fields...) In the beginning of my application the user will select sid.
    If the user selects ADS as SID, when he opens search-help for the first org. unit (werks), he will see the records with SID: ADS, VARBL = $WERKS, LANGU = SY-LANGU.
    If the user selects AGT as SID, when he opens search-help for the second org. unit (vkorg), he will see the records with SID: AGT, VARBL = $VKORG, LANGU = SY-LANGU.
    I have created a search-help taking SIDD, VARBL and LANGU as import parameters; used field mapping and bound this search help to my table. I have created 2 context nodes : org1 and org2 having attributes SID, VARBL, VALUE, LANGU .
    I have assigned related SID, VARBL and Langu values to these attributes at runtime as I needed. That way, if I use input field and reference to the related context attributes org1-value and org2-value2 accordingly, search help works well as I want.
    However, when I use select-options field , I can not bind the field to the context data. I can give reference only to ddic structure. Is there any way to reference to a context attribute? I searched for this in SDN, but could find nothing.
    I think I won't be able to use this way. What do you say?
    As I read from forums maybe using OVS help will be suitable for me. But I have to use one search-help for all select-options fields. Do you know how I can determine the active select-options field and pass its name (for instance "werks" ) as parameter to this OVS search help. (Also I'll pass SID and LANGU.)
    MY TABLE (ZBYYT080) CONTENTS:
    SID     VARBL     VALUE     LANGU     VTEXT
    ADS     $WERKS     1     T     Werk 0001
    ADS     $WERKS     11     T     OZYAS  GIDA URETIM YERI
    ADS     $WERKS     5501     T     BOYA GEBZE FABRİKASI
    ADS     $WERKS     5502     T     BOYA CIGLI FABRİKASI
    AGT     $WERKS     2301     T     KAMLI DAMIZLIK
    AGT     $WERKS     9601     T     PANAR DENIZ URETIM YERI
    ADS     $VKORG     22     T     AA KİMYASALLAR
    ADS     $VKORG     8001     T     İINSAAT BOYALARI
    AGT     $VKORG     6500     T     DAMk St.Org
    AGT     $VKORG     5400     T     PANAR St.Org.
    I wish I'm clear enough..
    I will be gald if someone answers me as soon as possible...
    Thanks İn advance..
    MERAL

    Hi,
    Your ques is how to refer to a DDIC search help to refer to selection screen parameter ?
    Am I right ?
    If Yes, then in the interface IF_WD_SELECT_OPTIONS
    method ADD_SELECTION_FIELD, ADD_PARAMETER_FIELD etc
    have importing param like I_VALUE_HELP_TYPE and  I_VALUE_HELP_ID, I_VALUE_HELP_MODE, I_VALUE_HELP_STRUCTURE
    etc which may help you to link your create DDIC Search help to selection screen params.
    this is just a clue from my side. I haven't tried it myself.
    You can go to the where used list of this method and find some sample implementations which use these params.
    Hope this helps.
    Regards
    Manas Dua

  • How to assign search help for custom cost centre field in SRM 7.0

    Hi Experts!!
    We are currently working in SRM 7.0.As per our business requirement, in account assignment tab we need to use a custom
    cost centre field (ZCOST_CENTRE) instead of standard cost centre field.It is observed that for standard cost centre field there is a standard web-dynpro search-help assigned where it will return the F4 search help values from backend.
    Can any one of you please help me how can I assign the search-help for the custom cost centre field. Is there any FM to call the backend cost centre search help for custom field or any other way how can I achieve this?
    Thanks in advance.
    Regards,
    Kalyani

    kalyani,
    i can see your requirement in below way..
    as it just reads: you need to assign the standard cost center help to a z cost center field in component /SAPSRM/WDC_UI_DO_ACC.. which actually is fetched though the component /SAPSRM/WDC_UI_BACKEND_SH
    so, if you see the component controller of SAPSRM/WDC_UI_DO_ACC you will see the component
    USAGE_SH_F4     /SAPSRM/WDC_UI_BACKEND_SH                        
    USAGE_SH_F4     /SAPSRM/WDC_UI_BACKEND_SH     INTERFACECONTROLLER
    so you can replicate the same functionality for your z field.
    but can you clarify one thing.. why are you going for this z field in place of standard field ?

Maybe you are looking for