Search help for ztable

Dear Experts,
I hv created 2 ztables. 1) ydept and 2) yemp_msater.
ydept table contains master data and yemp_msater table referecing this table.
I hv created a search help for ydept-dept field. when i run ydept ( SE11) I see the search help with 2 column one is for dept code and department name in other.
And i hv used same field in yemp_msater, but for this table, search help is with department code only. but i want department code and department name as i can see for ydept table.
can any one has idea about how to achieve this.
Thanks in advance
Jaspal

dear jaspal
need little change at search help level
open your search help in change mode
make all field (in your case 2 field) as IMP
and code as EXP.
now activate your search help
try to use in your both program
let me know if useful
regards
avirat.

Similar Messages

How to create Search Help For Ztable fields

Hi all,
Please let me know How to create Search Help in SE11(what are the parameter i should pass)
and How to maintain search help for Ztable fields at DIctionary level (in SE11) and programming level.

hello .
there are two types of search helps .
1. elementary search help .
2. collective serch help
Below are the steps to create elementary search helps :
1 In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
2.then youget a option elementary or collective search as per you r need .
3.select Elementary search help and choose
4.write explanatory text in the field Short text.
5. in the selection method give the name of the table or a view .
6 . Select the fields that should be used for value selection or in a hit list .
7. then define the attributes of the search help .
8 Select the IMP flag if it is an import parameter. Select the EXP flag if it is an export parameter.
9 .define the dialog type of the search help.
The dialog type tells how the hit list will be displayed in the input help.
10 . save and activate .
plz reward if usefull
Thanks ,
Abhishek .

Making Search Help for Ztable

Dear All,
              I have to create search help for ztable. I have created a Ztable with field (SRNO, STATUS, DESC). in the Ztable have made entries for SRNO form 1 - 1000, on my selection screen have taken a parameter, on that parameter want to create search help for SRNO. means entered value of ztable SRNO.
i have tried with match code , but dont konw much about that. so could not make it. Plz help me.
Looking foward to your earliest response.
Regards,
Gulrez,

hi,
First create a table Ztable with fields (SRNO, STATUS, DESC).
go to SE11 -Create search help.
To create search help,
1. In SE11,enter a name for Search/help.
2. Then enter the table name for which 'search/help' is to be created in
    the "Selection   method - (ZTABLE) " field
3. In 'Dialog Type' choose "Display Values immediately"
4. In 'Search Help Parameter' enter the required fieldnames of the table(can choose
    field names by clicking search icon).
(in the search help parameter you enter the field name SNRO to get the f4 help)
5. Enable import,export.
6. mark LPOS as 1 and SPOS as 0
7. Save,check and activate.
8. In SE11,in tables object enter the second table name to which the above created
    search help is to be assigned.
9. Place the cursor in a particular field and click 'Search help' icon and it will ask the
    search help name(enter the created search help name)
10.Now the search help for that field is created.So when you create entries for this
     table search icon would have been enabled for the assigned field.
Regards,
Madhavi

Search help for a field in ztable

Good day everyone!
I want to create a search help for a field. I have a field 'country' in my Ztable. Now I want to create a search help for that field so that they appear in the SM30 transaction while entering the data into the table. How can I do that?
thanks.

First of all if the field is country and you want to display all the countries avaiable in SAP in the search help then yuo dont need to create search help for that. For that field put the data element LAND1. The F4 help will automatically appear in SM30 and when you press F4 all the countries will be displayed in the hit list.
Now suppose there is a case where you want to display selected values only and not all the countries in your search help then one way is to create a z-table of countries and put all the countries you want in that table then create z-data element and z-domain for that country field and in domain give the table as a value table.
Another way is to create a view for T005 and T005T table and give the selection conditions as per your requirement and then create the search help with this view and attache the search help to your country field.

Search help for Plant in Ztable

Hi,
I need to create the search help for werks(Plant) in Ztable,
Rewards will be sure for usefull answers
Thanks and Regards,
Jatender Narang

Hi
Good
Check the below SDN link which will give you clear idea on creation of a Search Help.
Create Search Help
Thanks
mrutyun^

How to change search help for standard field in me51n.

hi frnds,
I want to change search help option for 'Advice code' field under Additional DFPS tab in me51n. But i dont know how to change or add search help for standard field. so plz help..
best regards,
sudip biswas

Hi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable.

How to add search help for standard field LIKP-TRAID

Hi friends,
How to add search help for standard field LIKP-TRAID ,
refer screen
Program Name SAPMV50A
Screen Number 2108
TrnsIDCode ( LIKP-TRAID ) ..
I need to add a search help, so that i can retrieve data from Ztable.
Thanks.
Abhi

Hi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable.

Search help for material number in table control

Hi
I have a table which i have generated using table control wizard.
I have used an interal table while creating the table control through wizard.
In this internal table i have field matnr.Now my requirement is to have a search help for this field.
I want a default search help for material as you get one instandard transactions.
In my other i have ip/op field i.e matnr and i have used the field directly from ztable,it has got the search help but since i am using the internal table i am notting getting a search help .
can anyone tell how to assign a search help to my table control material field

hi deepthi,
chk a sample one which will help u. f4 hlp in table control
* Screen flow logic........
PROCESS BEFORE OUTPUT.
*MODULE PBO_MODULE.
PROCESS AFTER INPUT.
*MODULE PAI_MODULE.
PROCESS ON VALUE-REQUEST. "F4
FIELD EKPO-EBELP MODULE help_ekpo.
* populate screen field from within PROCESS ON VALUE-REQUEST(F4) call
*& Module help_responsibility INPUT
* text
MODULE help_ekpo INPUT.
**Transport values to table dynpro/screen table control
DATA: l_stepl LIKE sy-stepl,
 l_indx LIKE sy-stepl.
DATA: dynpfields LIKE dynpread OCCURS 5 WITH HEADER LINE.
* Adjust for scroling within table control
CALL FUNCTION 'DYNP_GET_STEPL'
 IMPORTING
 povstepl = l_stepl
 EXCEPTIONS
 stepl_not_found = 0
 OTHERS = 0.
l_indx = tc_ekpotable-top_line + l_stepl - 1.
 "tc_ekpotable should already have been declared
REFRESH dynpfields.
CLEAR dynpfields.
dynpfields-fieldname = 'EKPO-EBELN'.
dynpfields-fieldvalue = '00010' "wa_ekpo-ebeln.
dynpfields-stepl = l_stepl.
APPEND dynpfields.
dynpfields-fieldname = 'EKPO-EBELP'.
dynpfields-fieldvalue = '00020' "wa_ekpo-ebelp.
dynpfields-stepl = l_stepl.
APPEND dynpfields.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = 'SAPLZZ_EKKO' "Program name
 dynumb = '0100' "Screen number
 TABLES
 dynpfields = dynpfields
 EXCEPTIONS
 OTHERS = 0.
ENDMODULE. " help_ekpo INPUT
rgds
Anver
if hlped kindly mark points

Creating search help for a field in AdHoc Query

Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten

Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten

Search Help for Vendor Feild not getting populated in the Screen Element

Hi Everyone,
In transaction Miro, I get a POP-UP for Invoicing Party i.e. Vendor and Users required a custom search help.
The Search help for Vendor(LIFNR) is KRED_C and i appended a Z search help under this.
Now that the search help exists and I can drill down the values too but when i select/choose any value, that value is not getting populated in Screen feild.
is there any validation I need to do for this.
Please suggest me... I checked SDN there are many things but i couldn't figure out wat i need to do and where I need to modify.
Regards,
Raj

Dear Hema,
Could you please tell me how many internal tables you are using to store the data for display.
I observerd that you have lt_stock and lt_mat2 declared in the part of the program
>DATA: lv_stock TYPE lty_stock.
>DATA: ltmat2 TYPE TABLE OF lty_mat.
you have displayed above, however you are also using ls_stock and lv_stock .
>IF p_ztotal = ' '. "line
>WRITE 18 ls_stock-matnr.
>WRITE 38 lv_stock-strgr.
>
>ELSEIF ztotal = 'S'.                             "subtotal
    >WRITE: 15 ls_stock-nrmit.
    >WRITE 32 lv_stock-dispo.
    >WRITE 43 lv_stock-fevor.
>ELSE.                                            "total
    >WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
>
>ENDIF.
Are those for displaying some other information?
Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
Best Regards,
Rajesh.
Please reward points if found helpful.

Search help for SKAT-SAKNR OR SKAT-SAKNR is not working

Hi All,
I have created a Search Help for F4 in a dialog program for SKAT-SAKNR OR SKAT-SAKNR. While i click F4 on that field, it displays blank values.
Here is the module:
module HELP_FOR_SAPGL_ACC input.
CLEAR t_SAPGL.
SELECT SAKNR TXT20
 FROM SKAT
 INTO CORRESPONDING FIELDS OF TABLE t_SAPGL UP TO 1000 ROWS
 WHERE SPRAS = SY-LANGU.
 WHERE L_GL_ACC = v_FIELD_VALUE-FIELDVALUE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 DDIC_STRUCTURE = ' '
 RETFIELD = 'SAKNR'
 PVALKEY = ' '
 DYNPPROG = PROGNAME
 DYNPNR = DYNNUM
 DYNPROFIELD = 'SKA1-SKANR'
 STEPL = 0
 WINDOW_TITLE =
 VALUE = ' '
 VALUE_ORG = 'S'
 MULTIPLE_CHOICE = ' '
 DISPLAY = ' '
 CALLBACK_PROGRAM = ' '
 CALLBACK_FORM = ' '
 MARK_TAB =
IMPORTING
 USER_RESET =
 TABLES
 VALUE_TAB = t_SAPGL
 FIELD_TAB =
 RETURN_TAB =
 DYNPFLD_MAPPING =
EXCEPTIONS
 PARAMETER_ERROR = 1
 NO_VALUES_FOUND = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endmodule.
In the above code I am selecting 1000 rows from SKAT table and in the Search Help Popup it is also displaying 1000 rows but all are blank.
Please help me.
Regards,
Avaneet

Hi check my weblog on search help exit codeing..
https://wiki.sdn.sap.com/wiki/x/du0
\* Prepare for output
CALL FUNCTION 'F4UT_RESULTS_MAP'
TABLES
shlp_tab = shlp_tab
record_tab = record_tab
source_tab = lt_result
CHANGING
shlp = shlp
callcontrol = callcontrol
EXCEPTIONS
illegal_structure = 1
OTHERS = 2.
IF rc = 0.
callcontrol-step = 'DISP'.
ELSE.

How to add a search help for a field in alv?

HI!Everyone ,
i want to add a search help created by myself for one field in alv,
and i want to use this function "HELP_VALUES_GET_WITH_TABLE".
can anyone help me ?
thanks!

HI,Vijay.
My code like this :
 PERFORM build_fcat.
 PERFORM build_objects.
 PERFORM layo_build.
 PERFORM set_drdn_table .
 CALL METHOD alv_grid->set_table_for_first_display
 EXPORTING
 i_structure_name = 'STU_S'
 is_layout = s_layo
 CHANGING
 it_outtab = itab_out
 it_fieldcatalog = i_fcat
 ."Period
 IF sy-subrc <> 0.
 EXIT.
 ENDIF.
for example, there is a field 'UNAME' IN Structure 'STU_S',
i want to add a search help for 'UNAME'.
the 'UNAME' is not users in SAP R/3 , i want to add some data by myself or from a table .

How to add search help for field in ALV object

Hello,
In a program, we use ALV object ( container) to create a liste like : field1, field2 .. but when display we do not have search help for this . Could you please help me how to add match code in this case for field 1 and field2, We use set_table_for_first_display
Thanks,

Hi,
when you define your field catalogue you can create data elements with search help in se11 and use them for field 1 and field 2.
But maybe it is enough to use data elements belonging to a domain with a value help and to set field F$AVAILABL in the field catalogue or to fill the name of the field CHECKTABLE.
Regards,
Klaus

How to get search help for 2nd parameter based on the 1st parameter value

Hi all!
 I have 2 parameters (material no, revision level). I have created a search help for revision level. It has an importing parameter :material no. and one exporting parameter : revision level.When I checked it, it's giving the revision values only for the specified.
In my report , I have kept these 2 materials in my selection screen.For revision level , I have added the matchcode object which I have created. When I pressed F4 for revision level, it's giving all the values irrespective of the material no. in the first parameter. How to solve it? Please suggest.

Hi,
Try this code filling internal table fields,
DATA: BEGIN OF values,
 OID TYPE ZCL_OBJECT-OBJECTID,
 ODEC TYPE ZCL_OBJECT-OBJECT_DESC,
 END OF values,
 W_FIELD(10).
DATA: ZCL_PROJECT-PROJECTID type zcl_project-projectid,
 ZCL_OBJECT-OBJECTID(5).
DATA: progname TYPE sy-repid,
 dynnum TYPE sy-dynnr,
 dynpro_values TYPE TABLE OF dynpread,
 field_value LIKE LINE OF dynpro_values,
 values_tab LIKE TABLE OF values.
CALL SCREEN 100.
*& Module VALUE_PROJECTID INPUT
 text
*MODULE VALUE_PROJECTID INPUT.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
 EXPORTING
 tabname = 'ZCL_PROJECT'
 fieldname = 'PROJECTID'
 dynpprog = progname
 dynpnr = dynnum
 dynprofield = 'ZCL_PROJECT-PROJECTID'.
*ENDMODULE. " VALUE_PROJECTID INPUT
*& Module VALUE_OBJECTID INPUT
 text
MODULE VALUE_OBJECTID INPUT.
 CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = progname
 dynumb = dynnum
 translate_to_upper = 'X'
 TABLES
 dynpfields = dynpro_values.
READ TABLE dynpro_values INDEX 1 INTO field_value.
W_FIELD = FIELD_VALUE-FIELDVALUE.
SELECT OBJECTID
 OBJECT_DESC
 FROM ZCL_OBJECT
 INTO (VALUES-OID,
 VALUES-ODEC)
WHERE PROJECTID = FIELD_VALUE-FIELDVALUE.
 APPEND VALUES TO VALUES_TAB.
ENDSELECT.
 CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'OID'
 dynpprog = progname
 dynpnr = dynnum
 dynprofield = 'ZCL_OBJECT-OBJECTID'
 value_org = 'S'
 TABLES
 value_tab = values_tab.
ENDMODULE. " VALUE_OBJECTID INPUT
*& Module INIT OUTPUT
 text
MODULE INIT OUTPUT.
progname = sy-repid.
dynnum = sy-dynnr.
CLEAR: field_value, dynpro_values.
field_value-fieldname = 'ZCL_PROJECT-PROJECTID'.
APPEND field_value TO dynpro_values.
IF SY-UCOMM = 'BACK'.
 LEAVE program.
ENDIF.
IF SY-UCOMM = 'ANS'.
 LEAVE TO SCREEN '0'.
ENDIF.
ENDMODULE. " INIT OUTPUT
START-OF-SELECTION.
WRITE: / field_value-fieldvalue,
 W_FIELD.
LOOP AT VALUES_TAB INTO VALUES.
 WRITE / VALUES.
ENDLOOP.
if sy-subrc <> 0.
 WRITE / field_value-fieldvalue.
endif.
Plzz reward points if it helps

Enhancing standard (single select)search help for Multiple value selection

Hi,
Standard search help for Business Partner (in cProjects) allows only single value selection for input fields. I want to make this multiple selection.
Is there a way to do it.
I used an OVS and built a similar search but its difficult to get the standard options like saving to personal value list etc in it.
It would be good if there is a way to modify the standard search help to allow multiple selection. Any ideas??
Appreciate your help,
Thanks,
Sri
Edited by: Sri on Sep 9, 2010 8:50 PM
Edited by: Sri on Sep 9, 2010 8:52 PM

As far as I know you can't make a standard ABAP dictionary search help return multiple entries - where you get this sort of functionality the searches don't use the standard Elementary search help framework (e.g. organisational structure searches)
Given that the WDA search help relies on these dictionary based searches, I'd think very much that you couldn't enhance it to return multiple. how you could even return multiple entries into a single UI element input field is also confusing to me.
I'd suggest creating a freely programmed value help, it would certainly take quite some effort to recreate those personal value lists etc, but it could be done - I don't like OVS, but that just me.

Search help for ztable

Similar Messages

Maybe you are looking for