Search Help issue in VA03

Hi Gurus,
After entering the PO/Job reference Number as 80 and clicking on search,we are receiving an error message saying that "No document selected" for one user ID.
But for the remianing User ID's,with the same Search options,we are able to get the list and user will select the appropriate Sales Order from the avaialable list.
We have given SAP_ALL for this User ID.Please help in resolving this issue.
Regards,
Narendra.

hi Narendra,
please check the following Basis notes 1450365 & 1489927 & 1521329
kind regards
Paul Quinn

Similar Messages

Enhancing F4 Search Help Issue - Standard Component

Hello All,
We have a requirement in SRM to customize couple of standard Search helps attached to the Webdynpro components. As such I know the concept of how we can handle this requirement but hitting an issue.
Standard Working scenario -
1) Standard Structure available with multiple fields. Two fields that are of our interest are SH_VALUE and SH_VALUE_LABEL.
2) Standard Search help for this being used has fields VALUE and VALUE_LABEL.
3) In the Structure the both the fields SH_VALUE and SH_VALUE_LABEL are mapped to the Search help VALUE and VALUE_LABEL.
4) In the WD component the node is mapped to the standard structure.
Running the application and the picking up the values from F4 on the SH_VALUE field will return its corresponding value and also map the SH_VALUE_LABEL field with the Label from the F4 since the structure and Search help mapping are there.
So far good when its standard.
Issue I am facing -
We need to modify this standard search help to customize our needs.
1) Did a Copy of the standard Search help and then modified to suit our needs. The output structure of the search is still the same as the standard one.
2) Did a Post Exit in the WD component to call our custom search help through the below code -
data lo_nd_attrib type ref to if_wd_context_node.
data lo_nd_attrib_info type ref to if_wd_context_node_info.
lo_nd_attrib = wd_context->path_get_node( path = `ATTRIBUTES_DATA.ATTR_DTLS_MULT` ).
lo_nd_attrib_info = lo_nd_attrib->get_node_info( ).
lo_nd_attrib_info->set_attribute_value_help( name = 'SH_VALUE' value_help_mode = '121' value_help = 'Z_ORG_ATTR' ).
lo_nd_attrib_info->set_attribute_value_help( name = 'SH_VALUE_LABEL' value_help_mode = '121' value_help = 'Z_ORG_ATTR' ).
Running the application just returns the SH_VALUE field but does not get the data for the SH_VALUE_LABEL.
Is there something wrong in the way I am calling the Custom Search help or should I need to approach this differently?
Thanks,
Nagarajan.

Hi Nagarajan,
Well, you are trying to set the search help to both attributes ( sh_value, sh_value_label) individually and it is having no link between these two attributes
i.e. once you select a value from search help of SH_VALUE, its no where linked that the other details to be passed to SH_VALUE_LABEL.
We generally, do the linking of attributes to search help parameters at structure level as below
So, if you need the same behaviour, then you need to assign the Zsearch help at strucuture field SH_VALUE and link the parameters to both fields SH_VALUE & SH_VALUE_LABEL
In case, if find it not possible to to this way,
You need to populate the value of field SH_VALUE_LABEL upon selection of value from search help of SH_VALUE.
i.e. by registering the search help selection event to an OnEnter action and write the logic to populate the value to SH_VALUE_LABEL
Please refer the below link
Automatically Trigger onEnter event after selecting value from the Value Help(F4 Help)
Hope this helps you.
Regards,
Rama

Search Help Issue

Hi All,
I'm facinng one strange issue with search helps. I have devloped online form in WDA with some F4 helps(I have used "Value Help button from Webdynpro Native) .
If I click search help buttons 15 times, the whole browser is closing with out any warning or error. I have been analysing why it is happening, but no use till now. I have seen browser log using HTTP Watch and Debug Webdynpro application etc.
Did any one face this issue? Is there any parametere setting or something? Or Is any other setting in ADS or J2ee or Adobe or any where???
Any pointer will be really apprecaited. Going live very soon in days..:)... Till now I couldnt realize this issue, infact tested in Dev and QA...but never tried keep on clicking for few times, until user pointed it out..
Can some one also try clicking for 15 times any search help and see , is it the same case?
Apprecaite your response.
Version Details:
SAP ECC 6.0
SAP_BASIS 700 0016 SAPKB70016 SAP Basis Component
SAP_ABA 700 0016 SAPKA70016 Cross-Application Component
Findings:
I was reducing the form size gradually like deleting some script, and fields... then number of hits increasing. I mean now after the changes the count increased to 22 then application is closing..
Regards,
Ravi
Edited by: Ravi Devarasetty on Apr 2, 2010 11:51 AM

Hi Otto,
I have already gone through that Snote. Nothing related to my issue. Probably I should open an OSS message.
New Findings:
I thought It is the problem with search helps, but after testing rigorously...the same problem with Submit Button. After clicking 22 times the applicaion gets closed automatially...
I doubt some related to Sizing????
Regards,
Ravi
Edited by: Ravi Devarasetty on Apr 3, 2010 10:03 AM

Tab in search help MM03 and VA03

Hi experts,
I added a new tab in matrn search help MAT1 (MM01/02/03) and it shows ok. But in VA01/02/03 item grid, the search help for matnr does not show the new tab.
VAs tcode use S_MAT1 search help, but MAT1 is in S_MAT1 as collective search help. Are there anythings to do?
How I add a new tab in VAs tcode search help in items grid for material???
Thanks in advance.

The item grid uses SD_MAT1 not S_MAT1 so there isn't a common collective search help where you can append your search help. Just append your search help to SD_MAT1 as well.

GL Account Search Help Issue

We want to change the standard search help of GL Account in the Shopping Cart line item.
Currently it fetches the value from ECC backend but we need to utilise a custom search help from SRM system.
Pease let me know how do we do this.
Thanks.

Hi,
You can do this with WD dynamic programming.
You can do with domodifyview badi for accounting component /SAPSRM/WDC_UI_DO_ACC.
You need to handle both views 'V_DO_ACCOUNTING' and 'V_DO_ACCOUNT_DETAIL' in the domodifyview badi implementation.
I am sending the sample code. How to attach the custom search help dynamically.
DATA lo_nd_comp_context    TYPE REF TO if_wd_context_node.
DATA lo_nd_acc_context     TYPE REF TO if_wd_context_node.
DATA lo_nd_info_acc        TYPE REF TO if_wd_context_node_info.
DATA lv_value_help_mode    TYPE i.
DATA lv_value_help         TYPE string.
" Read Context
lo_nd_comp_context = wd_context->get_child_node( name = 'COMP_CONTEXT' ).
" get node info object of accounting node
IF lo_nd_acc_context IS BOUND.
    lo_nd_info_acc = lo_nd_acc_context->get_node_info( ).
ENDIF.
" continue only if node info is supplied
IF lo_nd_info_acc IS BOUND.
    " get current search help info
    lo_nd_info_acc->get_attribute_value_help(
      EXPORTING
        name            = 'G_L_ACCT'
      IMPORTING
        value_help_mode = lv_value_help_mode
        value_help      = lv_value_help
" Below this will add the custom search help from SRM .
         lo_nd_info_acc->set_attribute_value_help(
        EXPORTING
          name            = 'G_L_ACCT'
          value_help_mode = 'BUS2121'
          value_help      = 'Z_F4-Your search help'   " you own search help.
endif.
Regards,
Devi prasad

Search help issue with WebGui Transaction iView

Hi All,
    We have customized transaction ZME51 for ME51 transaction.
    Transaction iView has been created for this in EP.
   But we are not getting search help within search help.
Please guide if anybody has got idea.
regards,
gangadharayya.

Hi,
Is your transaction working directly.
Try actual program/report transaction.. dont use Z transaction.
Check if you are getting search help for standard one? If so, you need to create Z searchhelps for yours.
regards
Kedar Kulkarni

Search Help Issue : Pls suggest

Dear All,
I have three text fields in one of my screens.
1. Transporter
2. TruckType and
3. Destination
I have provided search help for Transporter field and I display all the above three fields in the search help LOV.
My requirement is that on selection of any entry from the search help, the other two fields on the screen i.e. Truck Type & Destination should also get populated from the relative fields of the selected entry.
Regards,
Alok.

Hi Alok,
check this code...
tables: mara, makt.
data mat like mara-matnr.
data: begin of itab occurs 0,
matnr like mara-matnr,
end of itab.
data : begin of btab occurs 0,
maktx like makt-maktx,
end of btab.
data mak like makt-maktx.
DATA : return like ddshretval occurs 0 with header line.
data: begin of dynpfields occurs 3.
include structure dynpread.
data: end of dynpfields.
parameters: p_matnr like mara-matnr,
p_maktx like makt-maktx.
Initialization.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_matnr.
REFRESH ITAB.
SELECT matnr FROM mara INTO TABLE ITAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'MATNR '
dynprofield = 'P_MATNR '
dynpprog = sy-REPID
dynpnr = sy-dynnr
value_org = 'S'
TABLES
value_tab = ITAB
return_tab = return.
mat = return-fieldval.
unpack mat to mat.
select single maktx from makt into mak where matnr = mat.
p_matnr = return-fieldval.
refresh return.
clear return.
move 'P_MAKTX' to dynpfields-fieldname.
move mak to dynpfields-fieldvalue.
append dynpfields.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = 'SY-REPID'
dynumb = '1000'
tables
dynpfields = dynpfields.
refresh return.
clear return.
Regards
CNU

Strange Issue With Search Help

Hi Experts,
I am stuck with a search help issue, when using a certain Help for an input field on my screen i am getting a "Value help dialog canceled" cancelled error , the same search help seems to be working fine
when run from sap r/3.
I am pretty sure the design part (Attribute binding and mentioning the search help in the context ) is correct and how it should be.
Could Someone Please throw some lite on this issue.
Thanks In Advance,
Chaitanya.

Hi Chaitanya,
When reusing DDIC search helps in WDA, it may not always work as desired. Calls to classic screens in search help exits for example is one of the scenarios that works pretty well with SAPGUI but doesnt work with WDA.
The following links may be of help!
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/9f724642314aabe10000000a42189b/frameset.htm
Thanks,
Chitrali

Search help to filter values

hi friends,
appreciate your help on this search help issue
TYPE   ACTCODE
DUN     A01
DUN     A02
DUN     A03
COL     A06
COL     A07
i need to have a search help on selection screen when it loads, search help should have only values TYPE = DUN
please tell me how to
thnaks
iver

Hi
the same req
see this code
aapply for ur logic
by putting condition in where condition
reward if usefull
it is a code for search help which will give u the based on ur condition
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
IF S_OBJID IS NOT INITIAL.
    SELECT OTYPE OBJID FROM HRP1000
                 INTO TABLE IT_OBJID_SH
                 WHERE OTYPE = 'D'.
IF SY-SUBRC EQ 0.
SEARCH HELP FOR QUALIFICATION.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
             DDIC_STRUCTURE         = ' '
        RETFIELD               = 'OBJID'
             PVALKEY                = ' '
       DYNPPROG               = SY-REPID
       DYNPNR                 = SY-DYNNR
       DYNPROFIELD            = 'S_OBJID'
             STEPL                  = 0
             WINDOW_TITLE           =
             VALUE                  = ' '
       VALUE_ORG              = 'S'
             MULTIPLE_CHOICE        = ' '
             DISPLAY                = ' '
             CALLBACK_PROGRAM       = ' '
             CALLBACK_FORM          = ' '
             MARK_TAB               =
           IMPORTING
             USER_RESET             =
      TABLES
        VALUE_TAB              = IT_OBJID_SH
             FIELD_TAB              =
             RETURN_TAB             = RETURN_TAB
             DYNPFLD_MAPPING        =
           EXCEPTIONS
             PARAMETER_ERROR        = 1
             NO_VALUES_FOUND        = 2
             OTHERS                 = 3
    IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.

Issue in custom search help for Suggest Value

Hi,
I have a requirement to have the suggest values pick up the records form any par of the string. Basically, using pattern. I have written the code in search help exit and it work in some cases and doesnt work for others.Eg. The result shows up for 123 but doesnt show for 1234, even though 1234 exists and it had showed up when i keyed in 123.
My select quest works fine and i can see the values in record tab but on the screen. What could be going wrong.
Thanks in advance for your help.
Pris.
PS: the code:
IF callcontrol-step = 'SELECT'.
    DATA:lwa_selopt TYPE ddshselopt,
         lit_selopt_id TYPE RANGE OF yselxyz-builder_id,
         lwa_selopt_id LIKE LINE OF lit_selopt_id ,
         lit_selopt_desc TYPE RANGE OF yselxyz-builder_name,
         lwa_selopt_desc LIKE LINE OF lit_selopt_desc,
         lwa_header TYPE yselabc,
         lit_header TYPE STANDARD TABLE OF yselabc,
         lv_sel_val TYPE ddshselopt-low.
    READ TABLE shlp-selopt INTO lwa_selopt WITH KEY shlpfield = 'BUILDER_ID'."'DKEY'.
    IF sy-subrc EQ 0.
      lwa_selopt-option = 'CP'.
      CONCATENATE '*' lwa_selopt-low INTO lwa_selopt-low.
      MOVE-CORRESPONDING lwa_selopt TO lwa_selopt_id.
      APPEND lwa_selopt_id TO lit_selopt_id.
      MOVE-CORRESPONDING lwa_selopt TO lwa_selopt_desc.
      APPEND lwa_selopt_desc TO lit_selopt_desc.
      CLEAR:lit_header[],record_tab[].
      SELECT builder_id builder_name FROM yselxyz INTO TABLE lit_header
        WHERE ( builder_id IN lit_selopt_id )
       OR ( builder_name IN lit_selopt_desc ).
      SORT lit_header BY builder_id.
      DELETE ADJACENT DUPLICATES FROM lit_header COMPARING builder_id.
      CALL FUNCTION 'F4UT_RESULTS_MAP'
        EXPORTING
          source_structure = 'YSELABC'
        TABLES
          shlp_tab          = shlp_tab
          record_tab        = record_tab
          source_tab        = lit_header
        CHANGING
          shlp              = shlp
          callcontrol       = callcontrol
        EXCEPTIONS
          illegal_structure = 1
          OTHERS            = 2.
      callcontrol-step = 'DISP'.
      EXIT.
    ENDIF.
ENDIF.

Issue Resolved. For less than 50 records, client side filtering takes over. In that case the search help exit will not come into picture. Issue resolved by avoiding client side rendering.
callcontrol-maxexceed = 'X'.
Thanks,
Pris.

Issue with Search Help Creation

Hi All,
I need to display the match code for the Z table ZPRODUCT and the field is PRODH. The data should be retrieved from the table T179 by filtering PRODH = 'ZZ*' and STUFE = '1'. So, I am trying to create a Search Help for this requirement. But, the field ZPRODUCT-PRODH is of 5 Characters length and the field T179-PRODH is of 18 characters length. As the lengths are not matching, it is not allowing me to create the Search help. Could someone tell me if there is any way to overcome this issue?
Or is there any better approach to create the match code apart from the Search Help. Can we use the Table events for this requirements? Please share your thoughts.
Thanks a lot in advance.
Regards,
Paddu.

Did you check the screen field names & search help name? is it identical & unique?
Raja T

Issue in elementary search help.

Hi,
Facing some issue on Attaching search help directly to the screen Fields.
I have a requirement that
1> Based on a screen field, I have to filter F4 for the other fields.
2> I have to populate 2 screen elements at the same time.
Like:
In my transaction i have 3 fields :
1> PA0001-WERKS : Personnel area.
2> PA0001-PERNR : Personnel number
3> PA0001-ENAME : Employee name.
All 3 have been defined as Dictionary fields on the screen.
Now PA0001-WERKS has its on search help and i use that to select the WERKS.
Then i have to create a search help that takes this as the input and gives me a hit list showing all the personnel number ( and there name) in PA0001 table based on the screen field PA0001-werks.
When i do F4 on say Pa0001-pernr field: a hit list showing all the personnel number ( and there name) in PA0001 table.
When i select a row both PA0001-pernr and PA0001-ENAME should be filled in the screen.
Solution that i tried:
I created a elementary seach help ZSEL_PER and had the PA0001 as the selection table and had the 3 fields as the parameters:
1> WERKS as input
2> PERNR and ENAME as output.
Then i attached the search help to the srceen fields :
1> PA0001-PERNR : Personnel number
2> PA0001-ENAME : Employee name.
Now ,
a> When i do F4 my data does not get restricted as per the WERKS on the screen.
b> When i select a row both the fields on the screen dont get populated, only the field on which i did F4 ( that too always with the colomn 1 only of the hit list )..
Is this possible with elementary search help and if yes then how ? what am i doing wrong...
Thanks, Ad.

Hi anuj,
This is the Search Help Process(F4) for a Particular Field.
Go to SE11.
Select Search Help Radio button : Any name with Z or Y.
Create.
Short Description : Any.
Selection Method : Table Name.
Dialog Type : Display Values immediately.
Search Help Parameter : Field Name (for which field ur doing in the table).
Exp : Tick it.
Lpos : 1 Just giving the position.
SAVE CHECK ACTIVATE.
Next Assign the Search Help to the table or field.
SE11.
Your Table Name : Change.
Search Help Button above the fields.
Search Help name : Your search help name.
Copy.
SAVE CHECK ACTIVATE.
Now go and check to the field by F4.
Thats it.
hope this helps you.
reward points for helpfull answers.
regards,
venu.

Issue in CATS search help Hit List

Hi All,
At the moment we are facing an issue in CATS .
We have added customer fields in the CATS data entry area by implementing CAT0005 and CAT0002 enhancements.
One of customer filed we have created Search Help by using SE11 in that search help we have given default values in one of field and due to that on CAT2 transaction in the customer filed showing search help and that search help giving 2 records as hit list ( due to defaulting value in SE11 ).
Now when user clicking on Record working time service in that when customer click upon custom filed search help its giving 30 records as hit list u2026( here the search help should give 2 records hit list )
Any idea

note that search help of CAT2 and record working time are different!
these are teh steps
please modify the following in the table TCATS_SHLP_ITS as follows:
1. Execute the T-Code SM31
2. Enter the table name TCATS_SHLP_ITS.
or check the class
CL_XSS_CAT_VALUE_HELP_GENERAL
or check
CL_XSS_CAT_VALUE_HELP*
take an example from Sap note 914125

Issue With Search Help in Module Pool

Dear All,
I have an Issue with Search help. I have created a Module Pool Program. In this module pool, User requires the search helps for the fields.
Imagine there are 3 fields on a screen. Field1, field2 and field3.
Field2 entries depends on field1 and field3 entries depends on field1 and field2.
I have created a collective search help. and created the corresponding Ztables to maintain the search help entries.
Now I assigned the same collective search help to both the fields . i.e. field2 and field3. But when i execute the module pool program, and press F4 on these fields , the data shown is write. BUT for the 3rd field, when I select F4, The second field values are transfered to the screen, instead of third field value.
Any Idea will be appreciated .
Help me , Its very Urgent.
Regards,

Did you check the screen field names & search help name? is it identical & unique?
Raja T

Issue Search Help Exit for Material Group

Dear Expertsl,
I developed a search help exit for material group for the search helps both H_T023 and H_2023_MEPO to restrict certain material groups from the actual display as follows
1) I developed custom table to hold the Invalid material groups
2) Developed search help as same as in the bellow link
link:[https://wiki.sdn.sap.com/wiki/display/Snippets/CaseInsensitiveSearchHelpExitforMaterial+Group]
3) Before the statement
    SELECT matkl wgbez wgbez60 FROM t023t INTO s_t023t
      WHERE matkl IN t_matkl
i selected the Invalid materials from the custom table into an internal table
4)    i am restricting the entries with the following code.
LOOP AT a_tab.
only move values that meet the requirements
after you convert to upper case.
     MOVE a_tab-wgbez60 TO a_tab-wgbez60_test.
     TRANSLATE a_tab-wgbez60_test TO UPPER CASE.
        MOVE      a_tab-wgbez        TO a_tab-wgbez_test.
        TRANSLATE a_tab-WGBEZ_test   TO UPPER CASE.
        MOVE      a_tab-wgbez60      TO a_tab-wgbez60_test.
        TRANSLATE a_tab-wgbez60_test TO UPPER CASE.
      IF a_tab-wgbez60_test IN i_wgbez60 AND
         a_tab-wgbez_test   IN i_wgbez   AND
         a_tab-matkl        IN i_matkl.
        ADD 1 TO findex.
        MOVE a_tab-matkl   TO temp_tab-matkl.
        MOVE a_tab-WGBEZ   TO temp_tab-WGBEZ.
        MOVE a_tab-wgbez60 TO temp_tab-wgbez60.
        IF findex > callcontrol-maxrecords.
          MOVE 'X' TO callcontrol-maxexceed.
          EXIT.
        ENDIF.
        READ TABLE i_invalid INTO w_invalid
        WITH KEY matkl = a_tab-matkl.
        IF sy-subrc NE 0.
          APPEND temp_tab.
        ENDIF.
        CLEAR temp_tab.
      ENDIF.
    ENDLOOP.
This is working fine when we press F4 in ME21N Transaction and give some description and then press enter the popup screen.
But my requirement is user will enter some description in ME21N material group field and press enter ( Not pressing the F4 here) at this moment this is not going through the search help exit and displaying all the entries including the Invalid materials.
Note: We can delete the Invalid material groups but the documents which are having the invalid material already will have an issue and need to be corrected all the documents. But our requirement is only to use the correct materials groups from now onwards.
I would appropriate if any one can helping this regard.
Thanks in advance.,
Regards,
Venkat

Hi Venkat,
You can call your ZSEARCH_HELP from the PAI , on the event SY-UCOMM = Enter using the function module F4IF_FIELD_VALUE_REQUEST.
For example, your screen field is MARA-ZXXXX, screen 0100 and search help : ZSEARCH_HELP
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      tabname                   = 'MARA'
      fieldname                  = 'ZXXXX'
      searchhelp               = 'ZSEARCH_HELP '
      dynpnr                      = '0100'
      dynprofield                = 'MARA-ZXXXX'
TABLES
   return_tab                = lt_returntab.
This F4IF_FIELD_VALUE_REQUEST will call your custom search help exit.
Regards
Deepa.

Search Help issue in VA03

Similar Messages

Maybe you are looking for