Search help - Make a field default without grey-out

Hi,
I have a custom-search help, where in the dialog-popup I'd like to default a value without grey-out.
If I import from memory via parameter ID, then the default value is ok, but it's greyed out.
If I don't import it, then it's initial, but not greyed out.
Is it possible?
Thanks,
Peter

Hi Sri & Sanjay,
Thanks a lot for your help.
Unfortunately I cannot use the default value, as this should be dynamic based on another field on the screen. I tried if I use default, and it's not greyed-out.
If I use IMP flagged, or import this value in the user exit from memory, then it's always greyed-out.
It seems it's not possible unless I create my screen in the pop-up.
Thanks,
Peter

Similar Messages

  • How to add search help in Ztable fields and how to make filelad as check bo

    Hello Friends,
    I have one table named ZAUDIT with 5 fields.
    1 . I want to put search help for each field but it shows tht Inactive message.
    Sujjest me steps to create search help.
    2.. In my table I want to display content as check boxes in my last field.
    How to make it?
    Points awarded soon.
    Regards,
    NVM

    Hi,
    steps to create search help:
    Step1 : Go to Se11 and Select Search Help and Enter One Name and Click Create
    Step2 : Enter your Table name in 'Selection Method' Field.
    Step3 : Enter the field Name and tick the Flags Imp and Exp and Type 1 and 2 in Lpos,
    Spos fields.
    Step4 : Save and activate it.
    Goto the table, select the field which u want search help and press button search help, give the search help name which u created.
    To add check box for particular field,
    make use of data element <b>check_box</b>

  • Adding Search help to a field of standard transction

    hi experts,
    i m new to abap.
    my pp consultant wants that in transaction MM03, for the field on selection screen (Material) one more search help should be added. and on pressing f4 it should be displayed there with other search options.
    The search field is "(Document)-Number of the drawing that exists for this object".
    Note: To see this field run transaction MM03, enter a material and press enter then we get a screen to choose a view. choose basic data2. In the block "design drawing" there is a field for "Document".
    is it possible? if yes how much time it would take and to do it.
    how should i go about it.
    plz help.

    Hi ANNIE,
    Go through the following Procedure to add a Search help to a field of standard Transaction
    The Matchcode is replaced by search help from the version 4.6C.
    I will tell u how create the search help.
    Name of a search help
    A search help is an object of the ABAP Dictionary with which input helps
    (F4 helps) can be defined.
    There are the following types of search helps:
    o Elementary search helps implement a search path for determining the
    possible entries.
    o Collective search helps contain several elementary search helps. A
    collective search help therefore provides several alternative search
    paths for possible entries.
    o Append search helps can be used to enhance collective search helps
    delivered by SAP with customer-specific search paths without
    requiring a modification.
    The three components of the input help process described by a search
    help are the outer interface, the online behavior and the method of data
    Go to Tcode SE11. Select the search help radio button.
    Give name as ztest and click create
    There are two types of search help.
    Once is elementary search help
    & collective search help
    Choose one.
    Add the data element.
    MatchCode is replaced by search helps.
    To attach a search help to a field.
    Use this code.
    at selection-screen on value-request for source.
    progname = sy-repid.
    dynnum = sy-dynnr.
    clear value_tab.
    refresh value_tab.
    Filling the Value_tab internal table by itab2 internal table.
    loop at itab_desc.
    write itab_desc-description to value_tab.
    append value_tab.
    endloop.
    prog = sy-repid.
    no = 1000.
    clear tab.
    refresh tab.
    Building the Structure of the Seach Help.
    tab-tabname = 'FMFCTRT'.
    tab-fieldname = 'BESCHR'.
    collect tab.
    Function Used to provide Search Help.
    call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    retfield = 'BESCHR'
    dynpprog = prog
    dynpnr = no
    dynprofield = 'SOURCE'
    window_title = 'Function'
    TABLES
    value_tab = value_tab
    field_tab = tab.
    Regards
    Sreeni

  • Why is there no standard search help for table-field T056U-VZSKZ?

    Hi Experts,
    A blessed day.
    Table-Field T056U-VZSKZ (Control table for calculation of interest on arrears-Interest calculation indicator or account number) is being used to provide the entries for a screen-field of a standard transaction for Account Determination: Posting Specifications.  However, this table-field T056U-VZSKZ does not have a standard search-help.  I've looked for an OSS for this, but wasn't able to find one.  Is there a reason why this T056U-VZSKZ does not have the standard search help when VZSKZ is it's key field?
    Thanks. 
    Regards,
    ianne

    Hi Marco,
                     When you attach the search help make sure you also attach the export parameter of the search help to the name column. That is in the tab 'Further characteristics' we have to pass two value. The search help name should be typed in place of 'Parameters' and the export parameter of the search help should be typed in the place of 'Name'.
    Please try this and post back the updations.
    Thanking you,
    Jerry

  • How to delete entries from search help for a field

    hi guys
    how r u all doing.
    i have some questions for u.
    1. How can i delete some entries(from a list of many) from search help of a field with out (writing)going to a program.
    2.in PA10 (Personnel File),when i try to display data for a pernr,i am getting an error saying that infotype 122 doesnot exist.
    3.Again in Pa20,when i try to display data for a custom infotype,it leads me to short dump saying that load program does not exist.
    any help in this regard,wud be appreciated.
    thanks

    Follow this
    What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support

  • How to make a field default in mm01 while coping from other material

    hi all,
    i want to make a field default in mm01 ....mara-mstae -
    say value 'A', when
    i am coping from other material.
    normally a T.variant is working in the scenario when im creating a material
    but not when i am coping from other material.
    Any field exits would work on that .if so  how?
    thanks in advance,\
    sg

    i have to make the x-plant material status as 'BE' in mm01 basic view 1 ,when the material is created or copied from .<b>but it should be only default for the user might change it</b> 
    now when the material was created its workin---- coz a transaction variant has been created.
    but when im coping it from other material its picking the properties of the old material ( from which im coping) ..not the field value which i want to display as default.
    field exit only validates. can we give default value by it ,before saving a material??????
    thanks,
    sg

  • Search help for a field in table control based on another field value

    Hi,
    I want to attach the Search help for a field in table control based on another field value.
    Please help me asap.
    Will be highly rewarded

    HI,..
      Check these links
    search help in table control
    Re: How to create Search Help for a field in Table control !!
    How to create Search Help for a field in Table control !!
    F4 Help In Table Control
    Control table F4 help
    Problem in F4 help in screen field
    check this code
    DATA: BEGIN OF it_value4 OCCURS 0,
             TEXTCODE  LIKE  ZXX-TEXTCODE,
             TEXTDESC  LIKE  ZXX-TEXTDESC,
           END OF it_value4.
      progname = sy-repid.
      dynnum   = sy-dynnr.
             SELECT TEXTCODE TEXTDESC
               FROM  xxxx
               INTO CORRESPONDING FIELDS OF TABLE<b> it_value4</b>
              WHERE  LOSS_CODE =<b> IT_VALUE1 .</b>
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield    = 'TEXTCODE'
          dynpprog    = progname
          dynpnr      = dynnum
          dynprofield = 'ITVALUE-TEXTCODE'  "-->UR  4 th filed value in screen
          value_org   = 'S'
        TABLES
          value_tab   = it_value4.
    endmodule.
    Message was edited by:
            veereshbabu ponnada

  • Search help for custom field in SRM

    Hi All,
    Im new to abap. I want to add(enhancement) custom input field with search help function for organization unit. I hv added input field and its displaying in portal also.
    Now i want to add f4 help. Can u please help me in this regard. Can u tell me the steps to do for adding f4 help.
    Thanks,
    Rani.

    add search help to input fields data type. or you could assign search help via structure there that field is defined. you could enhance standard code adding custom search help which is called via FM. Choose the way.
    best regards,
    dez_

  • Search Help for Custom field in Sourcing Cockpit

    Hi SRM Experts,
    I added custom field "rush order" in the Structures as per requirement. I added code in MODIFY_SCREEN function module. Search help is working for "rush order" in Process Purchase Orders (to search PO) and Check Status (Searching Shopping Cart). But it is not working in sourcing cockpit. Please guide or suggest me is there any additional settings or programming is required to have search help for custom fields in Sourcing Cockpit.
    Thanks a lot in advance.
    Thanks,
    Koyya

    Hi SRM Experts,
    Please let me know any suggestion on this issue.
    Thanks a lot in advance.
    Thanks,
    Koyya

  • Custom Search Help for the field Equipment number

    Hi,
    I have enchanced sales order transaction and included a field Equipment number(EQUI-EQUNR).
    Here after pressing F4(Search help) standard search help is display.
    I have a requirement wherein, the standard search help should not appear and a customised search where a specific Equipment category type values should appear in the search help.
    Ex. Field equipment  category (EQTYP).EQUNR(Equipment Number).
    Please let me know how to work for the customised search help.

    Hi,
    You need to create a customized search help.
    [Elementary Search Help - Structure|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21ee38446011d189700000e8322d00/content.htm]
    [Creating Elementary Search Helps|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21ee5f446011d189700000e8322d00/content.htm]
    Then you need to attach the search help to the screen field..
    [Assigning Search Helps to Screen Fields|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21ee93446011d189700000e8322d00/content.htm]
    [Hierarchy of Search Help Call|http://help.sap.com/saphelp_nw04/helpdata/EN/0b/32e9b798da11d295b800a0c929b3c3/content.htm]
    regards
    Nitesh

  • Search help for screen fields in module pool

    Hi All,
    I have a screen in Module pool which has 3 input fields, each input field is attached to the same search help.
    These fields are from ztable . I have created a search help USING these 3 fields. All the 3 fields are marked for IMPORT and EXPORT.
    So whenever i click F4 on any of the above 3 fields, It will display search help popup and returns some rows...But the values are transfered back only for 1 fields ..i.e for the first field only .
    I want that ...as soon as i select any of the row from Search hit list..all the 3 columns should get populated with corresponding fields from that row.
    I require it this way as user wants to select based on * selection.Ex: as then every this related to that should be popped up.
    Pls help ASAP
    Thanks,

    This is how i got.
    data:l_shlp type SHLP_DESCR,
    l_rc type sy-subrc,
    w_DDSHRETVAL type DDSHRETVAL ,
    ls_shintf LIKE LINE OF l_shlp-interface,
    t_DDSHRETVAL type TABLE OF DDSHRETVAL.
    DATA: dyname LIKE d020s-prog,
    dynumb LIKE d020s-dnum.
    DATA: BEGIN OF dynpfields OCCURS 3.
    INCLUDE STRUCTURE dynpread.
    DATA: END OF dynpfields.
    CALL FUNCTION 'F4IF_GET_SHLP_DESCR'
    EXPORTING
    SHLPNAME = 'YTESTDMSSB'
    SHLPTYPE = 'SH'
    IMPORTING
    SHLP = l_shlp .
    ls_shintf-valfield = 'X'.
    MODIFY l_shlp-interface FROM ls_shintf TRANSPORTING valfield
    WHERE shlpfield = 'SNNTX'.
    MODIFY l_shlp-interface FROM ls_shintf TRANSPORTING valfield
    WHERE shlpfield = 'SBRTX'.
    MODIFY l_shlp-interface FROM ls_shintf TRANSPORTING valfield
    WHERE shlpfield = 'SBSTX'.
    MODIFY l_shlp-interface FROM ls_shintf TRANSPORTING valfield
    WHERE shlpfield = 'ENPTX'.
    MODIFY l_shlp-interface FROM ls_shintf TRANSPORTING valfield
    WHERE shlpfield = 'PLANT_CODE'.
    CALL FUNCTION 'F4IF_START_VALUE_REQUEST'
    EXPORTING
    SHLP = l_shlp
    DISPONLY = ' '
    MAXRECORDS = 500
    MULTISEL = 'X'
    CUCOL = SY-CUCOL
    CUROW = SY-CUROW
    IMPORTING
    RC = l_rc
    TABLES
    RETURN_VALUES = t_DDSHRETVAL
    IF l_rc = 0.
    LOOP AT t_DDSHRETVAL INTO w_DDSHRETVAL.
    CASE w_DDSHRETVAL-fieldname.
    WHEN 'SNNTX'. "W_SNNTX = w_DDSHRETVAL-fieldval.
    dyname = sy-repid.
    dynumb = sy-dynnr.
    dynpfields-fieldname = 'W_SNNTX'.
    dynpfields-fieldvalue = w_DDSHRETVAL-fieldval.
    APPEND dynpfields.
    WHEN 'SBRTX'. "W_SBRTX = w_DDSHRETVAL-fieldval.
    dyname = sy-repid.
    dynumb = sy-dynnr.
    dynpfields-fieldname = 'W_SBRTX'.
    dynpfields-fieldvalue = w_DDSHRETVAL-fieldval.
    APPEND dynpfields.
    WHEN 'SBSTX'. "W_SBSTX = w_DDSHRETVAL-fieldval.
    dyname = sy-repid.
    dynumb = sy-dynnr.
    dynpfields-fieldname = 'W_SBSTX'.
    dynpfields-fieldvalue = w_DDSHRETVAL-fieldval.
    APPEND dynpfields.
    WHEN 'ENPTX'. "W_ENPTX = w_DDSHRETVAL-fieldval.
    dyname = sy-repid.
    dynumb = sy-dynnr.
    dynpfields-fieldname = 'W_ENPTX'.
    dynpfields-fieldvalue = w_DDSHRETVAL-fieldval.
    APPEND dynpfields.
    WHEN 'PLANT_CODE'. "W_ENPTX = w_DDSHRETVAL-fieldval.
    dyname = sy-repid.
    dynumb = sy-dynnr.
    dynpfields-fieldname = 'W_WERKS'.
    dynpfields-fieldvalue = w_DDSHRETVAL-fieldval.
    APPEND dynpfields.
    ENDCASE.
    ENDLOOP.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
    EXPORTING
    dyname = dyname
    dynumb = dynumb
    TABLES
    dynpfields = dynpfields.
    ENDIF.

  • How to change search help for standard field in me51n.

    hi frnds,
              I want to change search help option for 'Advice code' field under Additional DFPS tab in me51n. But i dont know how to change or add search help for standard field. so plz help..
    best regards,
    sudip biswas

    Hi Abhi,
    Try using any one option:
    Create a Search Help in SE11.
    Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
    OR
    Create a Zdata element in SE11.
    In Data Element, under Further Characteristics tab, enter Name  Parameters of Search Help.
    Assign this data element to that field in ur Ztable.
    OR
    Create a Zdomain and maintain a Value Table or Fixed Values for it.
    Assign this domain to that field in ur Ztable.

  • Search help for a field with no dictionary reference

    Hi!
    I have created a serchhelp (see se11)
    there  are two included search helps nested. Each one
    has it own serch help exit. First search help has two
    fields and one of them is a character field (CHAR030).
    It hasn't a reference dictionary table in that case.
    How can I assign a search help esspecially for this field.
    Its values are stored inside a internal table.
    Regards
    ertas

    Hi,
    I think you need to attach a search help to a field programitically .
    Below is one sample code.
    REPORT  ZMSTR0022.
    CONSTANTS: C_FORM_NAME TYPE TDSFNAME VALUE 'ZMST_PER_APPL'.
    TABLES :ZMST_PERMIT.
    TYPE-POOLS: SLIS.
    TYPE-POOLS :VRM.                           "Value Request Manager
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-023.
    SELECT-OPTIONS:S_PIDNUM FOR ZMST_PERMIT-ZPIDNUM ,
                   S_ENGDSC FOR ZMST_PERMIT-ZENGDSC NO INTERVALS LOWER CASE,
                   S_ARBDSC FOR ZMST_PERMIT-ZARBDSC NO INTERVALS LOWER CASE,
                   S_TARIFF FOR ZMST_PERMIT-ZTARIFF NO INTERVALS,
                   S_PERNUM FOR ZMST_PERMIT-ZPERNUM NO INTERVALS,
                   S_ARRPRT FOR ZMST_PERMIT-ZARRPRT NO INTERVALS MATCHCODE OBJECT ZMST_PORTS.
    PARAMETER:P_PERTYP(2) TYPE C AS LISTBOX VISIBLE LENGTH 20.
    SELECTION-SCREEN END OF BLOCK B1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_PIDNUM-LOW.
      W_NAME2 = 'S_PIDNUM-LOW'.
      W_NAME1 = 'ZPIDNUM'.
      PERFORM F4_HELP USING W_NAME1 W_NAME2 .         "calling subroutine to provide desired F4 help
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_PIDNUM-HIGH.
      W_NAME2 = 'S_PIDNUM-HIGH'.
      W_NAME1 = 'ZPIDNUM'.
      PERFORM F4_HELP USING W_NAME1 W_NAME2 .         "calling subroutine to provide desired F4 help
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_ENGDSC-LOW.
      W_NAME2 = 'S_ENGDSC'.
      W_NAME1 = 'ZENGDSC'.
      PERFORM F4_HELP USING W_NAME1 W_NAME2 .         "calling subroutine to provide desired F4 help
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_ARBDSC-LOW.
      W_NAME2 = 'S_ARBDSC'.
      W_NAME1 = 'ZARBDSC'.
      PERFORM F4_HELP USING W_NAME1 W_NAME2 .         "calling subroutine to provide desired F4 help
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_TARIFF-LOW.
      W_NAME2 = 'S_TARIFF'.
      W_NAME1 = 'ZTARIFF'.
      PERFORM F4_HELP USING W_NAME1 W_NAME2 .         "calling subroutine to provide desired F4 help
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_PERNUM-LOW.
      W_NAME2 = 'S_PERNUM'.
      W_NAME1 = 'ZPERNUM'.
      PERFORM F4_HELP USING W_NAME1 W_NAME2 .         "calling subroutine to provide desired F4 help
    *&      Form  F4_HELP
          text
    -->  p1        text
    <--  p2        text
    FORM F4_HELP USING: W_VAR TYPE DFIES-FIELDNAME
                        W_VAR1 TYPE HELP_INFO-DYNPROFLD .
    Fetching data from zmst_permit for F4 help on PERMIT ID No.--
      IF IT_PERMIT[] IS INITIAL.
        SELECT ZPIDNUM
               ZENGDSC
               ZARBDSC
               ZTARIFF
               ZPERNUM
               ZARRPRT
               ZEFFDT
               ZEXPDT
               FROM ZMST_PERMIT INTO CORRESPONDING FIELDS OF TABLE IT_PERMIT.
      ENDIF.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          RETFIELD        = W_NAME1 " 'ZPIDNUM'
          DYNPPROG        = 'ZMSTR0022'
          DYNPNR          = SY-DYNNR
          DYNPROFIELD     = W_NAME2 "'S_PIDNUM'
          VALUE_ORG       = 'S'
        TABLES
          VALUE_TAB       = IT_PERMIT
        EXCEPTIONS
          PARAMETER_ERROR = 1
          NO_VALUES_FOUND = 2
          OTHERS          = 3.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                                                    " F4_HELP
    I hope this will help you.
    Help children of U.N World Food Program by rewarding  points and encourage others to answer your queries.

  • Search Help for a Field of a Table Control

    I have designed a screen using 'Table Control' with fields like Date, BoxNo,Quantity etc. Kindly tell me how to go about providing a search help for the field 'BoxNo' of this table control so that the user is not required to scroll down the entire table/list for selecting a particular box no.
    Thanx in advance,
    Alok.

    When you go to screen painer, in screen painter attributes window, there is an atribute called search help, fill it.
    Another way is, after PAI put:
    PROCESS ON VALUE-REQUEST.
      FIELD box_no MODULE f1_help_box_no.
    And gives logic in that module using FM F4IF_INT_TABLE_VALUE_REQUEST.
    Regards.

  • How to add a search help for a field in Screen Personas?

       I just started learning to use a Screen Personas, and I want to know how to add a search help for a field.
       I found a property in the help document named "IsLookupSupported". Is it the key?  But I saw it was gray in the field I created, and its value is "false". I could not change it.

    Hi, Tamas,
    I found the reason. The function Z_WEBRFC_READ_DATA_SH had a string concatenation error.
    CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
    The correct code is like:
    CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},{"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
    Another question is, I can't get any words in Chinese from WebRFC. It returns error when I try it. How can I configure it?
    Xin

Maybe you are looking for