Search Help values are transferred only on first use

Hello,
I've an alv grid from which when I select a record and clicks a button, a second window with another alv grid is launched. In this second alv, 3 fields are attached to the same Search Help so that when I select a valuefor one of the fields, the two other fields are populated with the corresponding values from the selected record. All three values are in the search help selection. This works just fine.
The problem is, when I close the second window and select another or even same record from the first grid, the two other fields do not get populated anymore in the second alv grid using the same search help.
How may this issue be resolve?
Thanks,
Reyleene

Hi,
I have a search help for the field.
Where i have written Search Help Exit for the that field.
Where for the 1st field company code is considered for selecting the values.
But for the 2nd field Company code is not considered for selecting the values.
Hence it is defaultly selecting the values.

Similar Messages

Transferring Search Help values from ECC 6.0 to SRM 7.0

Hi SAP experts,
I have a requirement to display the search help values for a data element in ECC 6.0 into the custom data element that I created on SRM 7.0.
Is there a BAPI that I can use to retrieve the values for a search help element (for example SH_ANLKA) from the the ECC into SRM?
Your advise would be greatly appreciated!
Regards,
Andrew

Hi Andrew,
I have got a similar requirement to fetch the PO details from ECC search help to a new SRM search help. Please help me with the procedure you used for the above scenario.
Thanks,
Santosh.

Elementry search help (value of import parameter)

hi friends..
In my search help...when i pass value in WERKS as CV01 ..then no result is coming..as only CV0 value is passed to import parameter..
and if put CV* then list is coming..
Any IDEA to solve this problem...
Message was edited by:
Madan Gopal Sharma

Hi
Have you created the search help properly
create by going through the doc and attach to the field werks and see,
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
Reward points if useful
Regards
Anji

Search help value restriction in two tables having same value table

Hi Gurus,
I have two tables containing same field having same domain with value table. My requirement is to restrict the values in the tables. For example the field contains 4 values:
1) A
2) B
3) C
4) D
For table 1, only A and C should be seen in F4 and for table 2, only B and D should be seen. Also if somebody forces B or D
in 1st table should not be allowed and the same for 2nd table ( A & C are not allowed ). How to do this using search help exit . Which event should I use. I don't want to create two separate check tables containing only the required values.
Regards,
Debopriyo

Hi Gurus,
I have two tables containing same field having same domain with value table. My requirement is to restrict the values in the tables. For example the field contains 4 values:
1) A
2) B
3) C
4) D
For table 1, only A and C should be seen in F4 and for table 2, only B and D should be seen. Also if somebody forces B or D
in 1st table should not be allowed and the same for 2nd table ( A & C are not allowed ). How to do this using search help exit . Which event should I use. I don't want to create two separate check tables containing only the required values.
Regards,
Debopriyo

Search help unavailable in Read-only input field since EHP4

Dear Experts!
I have a problem with a Portal page since the deploy of the EHP4. The page has standard input fields with Search Helps. I needed to have the input field non-modifiable so the user would have to use the search help to get the proper information.
Prior to the EHP4 installation, I set the input field to Read Only in the WebDynpro explorer, this disabled the editing while permitting the user to use the Search Help.
Since the installation, the search help is no longer visible or accessible on a Read Only standard inputfield.
Do you know if there is a way to allow the search help on a read only field?
Thanks so much for your answer,
Brian Foster.

>Since the installation, the search help is no longer visible or accessible on a Read Only standard inputfield.
This was a conscious design decision on SAP's part that disabled or read-only fields should no longer fire value help. I am aware that this situation was used in the past as you describe. It is even still used in SE80 for the Web Dynpro ABAP wizards. However usability studies showed that this often confused end users and therefore it is no longer allowed. The field must be input enabled to fire the attached serach help.

Search Help values to Internal table

Dear Friends,
Is it possible to export Search Help values to Internal table?
On screen, when user click on Search button, the SAP standard search help will call (Customer Search). After entering values, some result get displayed and this result need to export to the internal table.
Thanks in stack
Nilesh

Hi:
try this:
DATA : wa_shlp TYPE shlp_descr,
           it_records LIKE ddshretval OCCURS 0 WITH HEADER LINE.
wa_shlp-SHLPNAME = 'MAT0M'.   "one of elementary search help name from mara-matnr.
wa_shlp-SHLPTYPE = 'SH'.
CALL FUNCTION 'F4IF_SELECT_VALUES'
     EXPORTING
       shlp                   = wa_shlp
MAXROWS                = 0
SORT                   = ' '
CALL_SHLP_EXIT         = ' '
IMPORTING
MAXROWS_EXCEEDED       =
    TABLES
RECORD_TAB             =
RECDESCR_TAB           =
      return_tab            = it_records
LOOP AT it_records.
WRITE:/ it_records.
ENDLOOP.
Follows is how to get the search help name:
CALL FUNCTION 'DD_SHLP_GET_HELPMETHOD'
EXPORTING
    tabname                 = 'MARA'
    fieldname               = 'MATNR'
    langu                   = sy-langu
NO_CHKTAB_MAPPING       =
GET_ENTITYTAB           = ' '
   CHANGING
     shlp                    = wa_shlp
callcontrol             = callcontrol
EXCEPTIONS
    field_not_found         = 1
    no_help_for_field       = 2
    OTHERS                  = 3
CALL FUNCTION 'F4IF_EXPAND_SEARCHHELP'
   EXPORTING
     shlp_top = wa_shlp
   IMPORTING
     shlp_tab = shlps.
好运,
启明星

App file sharing: files are displayed only the first time...

clicking somewhere else and then back to the application that you want to share files are not there any more.
I've to close and re-open the itunes in order to see them again.
itunes is running on windows 7 64bit.
is this a bug ?
thank you.

Hi! I have the same, exact problem. The files are displayed only the first time I look at the apps listed under File Sharing. If I look at another app on the list, the files on the one I previously checked are gone when I look at it again. Is there any way to fix this? I have a Lenovo X61s on Windows XP Professional 32 bit.

Only Using Search Help Value When Entry Value

Hi Experts,
I'm using search help at my screen field for entry value. But I dont want to entry value with using hand/finger/manuel.
I want to use only search help at my field.
Is this possible?
Best regards.

Thanks All for answers.
I mixed your solution and I find new way for my issue.
I did like this.
I added Input/Output Field at screen and I did input properties false.
And I added button near the I/O Field.
I wrote at PAI - User_Command for button on click.
May there is different way but so my solution.
My draft code below.
    WHEN '&BTN_PREPARE'.
   DATA : BEGIN OF ITAB OCCURS 0,
      KTANIM TYPE CHAR9,
      IPTPKOD LIKE ZKZN_004-IPTPKOD,
      KYPTYPEID LIKE ZKZN_004-KYPTYPEID,
      FIILOLS LIKE ZKZN_004-FIILOLS,
END OF ITAB.
      CLEAR : ITAB.
      REFRESH : ITAB.
      SELECT IPTPKOD KYPTYPEID FIILOLS
      INTO CORRESPONDING FIELDS OF TABLE ITAB
      FROM ZKZN_004
      WHERE SILINDI = ''.
      LOOP AT ITAB.
        CONCATENATE ITAB-IPTPKOD ITAB-KYPTYPEID
        INTO ITAB-KTANIM SEPARATED BY SPACE.
        CONCATENATE ITAB-KTANIM ITAB-FIILOLS
        INTO ITAB-KTANIM.
        MODIFY ITAB.
      ENDLOOP.
      DATA : DFIES LIKE DFIES OCCURS 0 WITH HEADER LINE,
             DDSHRETVAL LIKE DDSHRETVAL OCCURS 0 WITH HEADER LINE,
             DSELC LIKE DSELC OCCURS 0 WITH HEADER LINE.
      CLEAR   : DFIES, DDSHRETVAL, DSELC.
      REFRESH : DFIES, DDSHRETVAL, DSELC.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          RETFIELD        = 'KTANIM'
          VALUE_ORG       = 'S'
        TABLES
          VALUE_TAB      = ITAB
          FIELD_TAB         = DFIES
          RETURN_TAB      = DDSHRETVAL
          DYNPFLD_MAPPING = DSELC.
      BREAK MELIHM.
      READ TABLE DDSHRETVAL INDEX 1.
      IF SY-SUBRC = 0.
        ZKZN_DATA01_S01-IPRJSCR01 = DDSHRETVAL-FIELDVAL.
      ENDIF.

Selection Screen search help values based on condition

Hi All,
I am developing this report for HR.And the requirement is in one of the selection screen field the
value's should be appeared(when f4) based on some condition,ie not all values should come.
My field is HRP1001-sobid,here there are many values,they dunt want all that to be shown when user
tries to input the values(F4).And also i need to show the Text for this field(department name) in
search help.
Can anyone please guide...
Thanks in advance.

Hi Salz
You can code your own search help procedure for this. To achieve this, first you should add the block:
<u>e.g.</u>
AT SELECTION-SCREEN ON VALUE REQUEST FOR p_sobid.
Within this block you can use the standard FM "<b>RH_OBJID_REQUEST</b>" to call the standard HR help list for objects conditionally.
Regards
*--Serdar <a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=qbk%2bsag%2bjiw%3d">[ BC ]</a>

Automatic population of search help value to another field in module pool

Hello there,
I am developing a module pool screen, in which i have a table control field with fields PERNR and ARBPL along with other fields.
I have to give a search help for Pernr first field for which i have given a search help with the use of PM02 search help, given in the screen field level, in the same search help there is another field ARBPL, when the pernr is selected i have to get the corresponding Arbpl field value in the search help hit list and pass it to my field arbpl in my table control.
I tried with POV event as well with FM f4if_field_value_request but the return structure always filling one value only PERNR.
Is there any chance to get the both field values from the search help.
Thank you in advance.
Regards,
Kumar.

Try the following logic in your table control, in table control you have get the selected index using function DYNP_GET_STEPL.
TYPE-POOLS: shlp.
PARAMETERS:p_matnr TYPE marc-matnr,
           p_werks TYPE marc-werks,
           p_ekgrp type marc-ekgrp.
TYPES:BEGIN OF ty_marc,
      matnr TYPE marc-matnr,
      werks TYPE marc-werks,
      ekgrp TYPE marc-ekgrp,
      END OF ty_marc.
DATA:i_marc TYPE TABLE OF ty_marc,
     i_val TYPE TABLE OF ddshretval,
     wa_val TYPE ddshretval.
DATA:wa_dynpfields TYPE dynpread,
    i_dynpfields LIKE STANDARD TABLE OF dynpread.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_matnr.
SELECT matnr werks ekgrp FROM marc INTO TABLE i_marc UP TO 100 ROWS.
CHECK i_marc[] IS NOT INITIAL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield         = 'MATNR'
      value_org        = 'S'
      callback_program = sy-repid
      callback_form    = 'CALLBACK_ROUTINE'
      dynpnr           = sy-dynnr
    TABLES
      value_tab        = i_marc
      return_tab       = i_val
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS           = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT i_val INTO wa_val.
    IF sy-tabix = 1.
      wa_dynpfields-fieldname    = 'P_MATNR'.
      wa_dynpfields-fieldvalue   = wa_val-fieldval.
    ELSEIF sy-tabix = 2.
      wa_dynpfields-fieldname    = 'P_WERKS'.
      wa_dynpfields-fieldvalue   = wa_val-fieldval.
    ELSEIF sy-tabix = 3.
      wa_dynpfields-fieldname    = 'P_EKGRP'.
      wa_dynpfields-fieldvalue   = wa_val-fieldval.
    ENDIF.
    APPEND wa_dynpfields TO i_dynpfields.
ENDLOOP.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
    EXPORTING
      dyname     = sy-repid
      dynumb     = sy-dynnr
    TABLES
      dynpfields = i_dynpfields.
FORM callback_routine TABLES i_val TYPE ddshreslts
            CHANGING wa_shlp TYPE shlp_descr
                     wa_callcontrol LIKE ddshf4ctrl.
DATA:
    wa_intf     LIKE LINE OF wa_shlp-interface.
wa_intf-shlpfield = 'F0002'.
wa_intf-valfield = 'X'.
wa_intf-f4field = 'X'.
wa_intf-value = '~'.
APPEND wa_intf TO wa_shlp-interface.
wa_intf-shlpfield = 'F0003'.
wa_intf-valfield = 'X'.
wa_intf-f4field = 'X'.
wa_intf-value = '~'.
APPEND wa_intf TO wa_shlp-interface.
ENDFORM.                    " CALLBACK_F4

Search help overwrite a read-only field

Hi, I have some problems with search help and hope someone can help me.
My search helps (either standards or customs) work perfectly, but a strange behaviour
occur on Read-Only fields. If I open the Search Help popup and select a value, it overwrite the
READ-ONLY value !!!!!
Hope you can help.

Depending on the support pack level you are on - search helps - freely programmed or otherwise don't seem to trigger off read only fields (I noticed this when we moved to NW7.01)
I've got around this by making the field a link to action - providing the read only link I want as the text, and then calling the following code:
call method cl_wdr_value_help_handler=>handle_application_def_vh
    exporting
      context_element      = context_element
      component_usage_name = 'JOB_SELECTION'
      context_attribute    = 'JOB'.
Where component 'JOB_SELECTION' is my freely programmed value help - implementing WD interface IWD_VALUE_HELP.
This was helpful as I wanted the search help to trigger and the user to be able to update the field but only by using the search help - I didn't want the user to be able to write anything in the field.
it was a particular use case I had - it may or may not fit your needs.
Cheers, Chris

(Urgent) Sorting search help values in Web Report

Hello Friends,
We have a web report which uses a variable made on 0CALMONTH. The order of display of values for this variable search help is 02/2004, 03/2004, 01/2005, 07/2006, 08/2006, 05/2007. In this order we have the latest date (05/2007) displayed at the end of the list. What we want is that the values in the search help of 0CALMONTH should be displayed in the reverse order i.e. latest date first (05/2007, 08/2006, 07/2006... etc).
Thanks in advance for your assistance.
Regards,
Prem.

Hi Premanand,
If u display the report in Internet Explorer there you can see differnet buttons like
Save View, Book mark, Variable Screen etc...There click Save View give tech name and descryption. After Sorting use this in WAD instead selecting query , select this view and execute.
Assign Points Pls...
Best Regards,
SG

How-to map multiple explicit search help values to context attributes?

Hi,
I have a custom explicit Search Help with multiple attributes set as export and uses search help exit for data retrieval. I have set this Search Help for one of the context attribute that is binded to one of the input fields on view.
Now, is it possible to dynamically map other export attributes from this Search Help to other Context attributes?
I know this works for Input helps that are directly derived from check tables but not sure how to do it for explicit Search Helps.
Can anyone please confirm and let me if this is possible? If yes, then can you please share an example or describe how to do it?
Thanks and Regards,

Hi Srinivas,
Check this ..Search help can be dynamically assigned to a field.
data lo_nd_info type if_wd_context_node_info.
lo_nd_info = lo_nd->get_node_info( ).
CALL METHOD lo_nd_info->set_attribute_value_help
EXPORTING
name = 'ATTR1'                  " Your attribute Name
value_help_mode = '121'    " Valid value help mode
value_help = 'Z187442'.      " Search help name
The various possible values that you can pass to value_help_mode are as shown below.
deactivated 101
automatic 111
ddic 121
ovs 131
Also refer this..
Re: How to put dynamic search help in web dynpro ABAP.
Cheers,
Kris.

Search help value restriction fields

Hi experts,
I have modified the existing search help by using "SEARCH HELP EXIT".
Here is the situation:
As soon as I press F4 button on particular field, it will display search help restrictions window with 4 fields.
suppose if I enter material number on material number field, it should display only particular material not all materials.
Normally it was working fine before I written search help exit.
In search help exit I am selecting values directly from database table with out consider restrictions window parameters.
How to findout the restrictions window parameter names ( I mean screen field name). So that I can add those fields in my select statement where condfition.
Pls help me.
Thanks in advance
Raghu

I got the solution. Any how Thanks.

The Previous Search help value

PARAMETERS:LOTNUM TYPE QPLOS OBLIGATORY,
STARTDAT TYPE QALS-PASTRTERM OBLIGATORY.
SELECT-OPTIONS: FTEST FOR QAMV-VERWMERKM Matchcode Object ZLOT_HELP.
Please answer accroding and using the above parameters and select-options.
My Requirement is that the when user selects the LOTNUM value by pressing F4.
then he wants to select the value of FTEST when he press the F4 button on FTEST then
the manual search help ZLOT_HELP will popups I need the Previous Selected LOTNUM value
to be displayed or selected in the manul Search Help F4 of FTEST.
Please If possible send me the CODE using the abov parameters and select option.
and guide me except the option AT SELECTION-SCREEN ON VALUE-REQUEST FOR FTEST.
cos this option gives me error due to I m using manual search help and this option can be used only wiht
standard helps.
Regards.

try FM DYNP_VALUES_READ to get entered values of LOTNUM-->check its documentation for its usage.
F4IF_START_VALUE_REQUEST-->u can use this FM to get values frm ur custom search help .
regards
Prabhu

Search Help values are transferred only on first use

Similar Messages

Maybe you are looking for