Search help - window system type

When clicking on a search help button, in the ABAP WebDynpro application, the user has the following error:
"Sending of dynpro SAPLSZA1 0201 not possible: No window system type specified".
Please, what could be causing this error?
Thanks

Hi Hari,
not yet.
I am sending for QAS the configuration with the Search help KRED_C, and lets see what happens.
What I think is that there is some EXIT implementation in one of the underlying Search Helps of the KRED, once it is a Collective Search Help.
As I found in the SDN, "Search help exits containing dynpro-specific functions, for example, CALL SCREEN, are not supported.".
see http://help.sap.com/saphelp_nw04s/helpdata/en/47/9f724642314aabe10000000a42189b/content.htm
I hope it helps.
Regards.

Similar Messages

  • Sending of dynpro SAPLSDH4 0200 not possible: No window system type specifi

    Hello All,
    We have a problem related search help of Preferred supplier. When the preffered supplier is selected, inturn we will get another screen with lot of other options.
    When the search help for Purchasing org ID is selected, we are getting the error as "Sending of dynpro SAPLSDH4 0200 not possible: No window system type specified".
    I have debugged, but did not get any clue. Could any one please let us know if any one have any idea.
    We are using SRM 6.0, Web dynpro ABAP.

    Hi ,
    Thanks for your inputs.I had a look of this note earlier as well.
    Bu this error is not on Solution Manager and we cann implement this note.
    We are facing this on ERP system and component mentione di not in uses actually.
    Regards
    Ajay

  • Sending of dynpro SAPLSPRI 0100 not possible: No window system type is spe

    Upon clicking dictionary search help PREM tagged to "Personnel Number" input field in Web Dynpro ABAP application, error message "Sending of dynpro SAPLSPRI 0100 not possible: No window system type is specified." is encountered. This error message is displayed within the message area and not a short dump. This error message is only occuring for some users.
    Does anyone knows how to resolve this error message?

    Hi,
    I thnk the search help exit is implemented in search help PREM in your system. If the code in exit in written in such a way that under some conditions it is calling any ABAP screen, it will throw error in webdynpro ABAP environment. Condition in the exit might be reaching for some users under certain cases.
    Open the PREM help in SE11 and check the function module mentioned in Search help exit section. It might also contain another call to F.M which might be calling a ABAP screen. If this is the case, this error cannot be fixed as WD ABAP dont support ABAP screen call.
    Regards
    Vishal kapoor

  • Extra fields in search help window in Record working time EHP5

    Hi Experts,
    Can you please let me know how to add additional fields/select options in search help window for Record Working Time ?
    My system is EHP5 NW 7.02
    I have added the custom search help for the respective filed in table " TCATS_SHLP_ITS".
    I can see this table is having entry for only 4 selection options and 6 value fields for search help display.
    But in my custom search help programme is having 8 select options(for advance search) and 10 display fields on the search window. It's working from CAT2 transaction but when I am running through webdynpro timesheet, I can only get 4 select options and 6 value fields.
    Please let me know how to make the other fields available.
    Thanks in advance.
    Sonia

    Hi Siddharth,
    Thanks for your response. In that modify possible entries screen (Details view) I can see the search help is only having 4 select options and 6 display fields.
    So as per my understanding max 6 display fields/4 select options can only be displayed on search window.
    My requirement is to display more fields on search help OVS window.
    Can you please suggest.
    Thanks ,
    Sonia

  • How to get results of search help window?

    Hi, experts,
    I have a question here.
    For a field vendor id there is pre-defined search help, with which the detailed information of vendor inclusive the vendor id will be returned. But it will only fill this vendor id field. other information in the result like vendor name will be lost. I still need this information for other fields. And I hope to get other fields filled with the info in the results.
    How can I get the complete info in the result delivered by search help window?
    Can anybody help?
    Best regards,
    Fan

    In short you need to fill the other fields on the screen using the same search help.
    for that read this thread, Thomas nicely explained the same with an example
    Re: Help On Search Help !!!!!
    Abhi

  • Sending of dynpro SAPLSTRD 0300 not possible: No window system type specifi

    Hi All
    While working in ERP 6.0 EHP 3 ,navigating to Human Resources and Compensation Planning ,from there opening the Start Budget Administration .
    When trying to save the budget of any unit a BSP page is opening with following error.
    error
    ===================
    Sending of dynpro SAPLSTRD 0300 not possible: No window system type specified
    Exception
    CX_SY_SEND_DYNPRO_NO_RECEIVER
    Error Name
    DYNPRO_SEND_IN_BACKGROUND
    Program SAPLSTRD
    Include LSTRDU30
    ==================
    Can anybody pls let me know what could be reason for this?
    Regards
    Ajay

    Hi ,
    Thanks for your inputs.I had a look of this note earlier as well.
    Bu this error is not on Solution Manager and we cann implement this note.
    We are facing this on ERP system and component mentione di not in uses actually.
    Regards
    Ajay

  • Transactional Iview passing parameters for search help window

    Hi Experts,
    I have to create a transaction ivew through which i need to pass parameters to search help window (having two entries ). In has to select the particular entry and then go to next step.
    Can somebody give me guide me how to do it as i couldn't fine correct answer in the existing forum answers.
    Regards,
    Suresh

    Hi Suresh,
    Have you read the [documentation|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/88/266a3e54a2e946e10000000a114084/frameset.htm]?
    >ApplicationParameter
    >
    >You can enter parameter values for certain screen fields for displaying a SAP transaction here.
    >This field is optional.
    >
    >The parameter values are specified with the following syntax:
    >
    ><Screen_field1>=<Parameter1>
    >&<Screen_field2>=<Parameter2>
    >&<...>=<...>,...
    >
    >Process First Screen
    >
    >The possible values are trueand false. By default this field is defined as false. It is a required field.
    >
    >If the value is set to true, this corresponds to the input key function in the transaction. It takes effect if there are no required >fields in the transaction or if all the required values are maintained in the ApplicationParameter property.
    Regards,
    Pierre

  • OVS search help window Condensed

    Hi experts,
    Please Suggest Some solution for the below problem.
    I had Two Columns in OVS search help where only one column is displayed and the other column is condensed.
    Please suggest some solution asap this issue needs to be cleared early.
    Thanks in Advance.

    Duplicate thread to OVS - change window size
    Locking this thread.

  • Search help window opening two times

    Hi folks,
              i found one of wda application is integrated into portal.on portal side if i press on search help symbol then it opened external window two times.How can i make that to one window

    External windows are never used by search help becuase they open in a separate user session - making data communication back and forth very difficult.  When modal windows are triggered, the parent window is frozen and no longer accepts input.
    When you say external window, what are you seeing.  Is it actually a separate browser window that can be dragged outside the confines of the parent window. If this is really an external window, then it doesn' seem like this is a search help.
    Have you studied the WD Component. Can you see what kind of search help this is.  What triggers it?  A normal button or the search help button attached to an input field.

  • Restrict search help results on order types

    I need to restrict search help results on the account assignment category  for order type for the users when creating a SC. I have define fix values on the attributes PM_AUART & ANR & KNT (Order type, Order & Account assignment category) and maintained the related others PM attributes as well. But when I select the search help the system brings up all the Orders type and not the ones defined at the user attributes -  PM_AUART (Order type). Do I am missing something? How can I restrict the search help when searching for order types?
    Your support is highly appreciated.
    Thanks
    William

    Hi
    Please elaborate which SRM version you are currently on..
    Which Search help you are referring to and the name of the serach help which is being used ?
    Regards
    - Atul

  • How to use Search help PRCTR_EMPTY in Web dynrpo ABAP

    Hi,
    I have a requirement to use search help PRCTR_EMPTY as F4 help for an InputField in my application. But, in the F4 help, if I select "Profit Center Via Standard heirarchy" and search, it is giving me the following error:
    "Sending of dynpro SAPLSPO4 0300 not possible: No window system type specified"
    Here the search help is trying to call a R/3 screen from web dynpro.
    Pelase suggest me if there is any other way to use this search help in web dynpro.
    Thanks,
    Manogna

    hello,
    Any search help where R/3 screen is called, will not work in WD ABAP environment. You can create search help using OVS and follow the similar way of data selection as in search help.
    Regards
    Vishal kapoor

  • Error when open search help

    Hey,
    I am getting the this error :- "Sending of dynpro SAPLHRBAS00SEARCH_INTERNAL 4100 not possible: No window system type specified" while using the search help PLOM.
    Any info will be of great help!
    Thanks
    Salah Afia

    Hi Salah Afia  ,
                Try using the search help KRED_C instead. please use and reply ..
    Regards
    Puneet

  • Search Help calling screen

    Hi Guys,
    please.. How can a Search Help implement a "CALL SCREEN" command?
    I have a problem in a ABAP WebDynpro app, apparently because the search help is calling a SCREEN from the program SAPLSZA1, and I have to undo this. It shouldn't call.
    This is the error message:
    "Sending of dynpro SAPLSZA1 0201 not possible: No window system type specified"
    The search help is KRED.
    Any idea??
    Thanks!

    I have tried both. Same problem..
    But the real problem is that I can not reproduce this in DEV. It only happens in QAS, and i can not find what is different. All the objects that I have checked so far (Search Help, Program, etc.) have no differences.
    Tks

  • Search Help CALL SCREEN

    Hi Guys,
    please.. How can a Search Help call a SCREEN ?
    I have a problem in a ABAP WebDynpro app, apparently because the search help is calling a SCREEN from the program SAPLSZA1.
    This is the error message:
    "Sending of dynpro SAPLSZA1 0201 not possible: No window system type specified"
    The search help is KRED.
    Any idea??
    Thanks!

    Hi,
    it can call screen using search help exit. KRED is a collective search and for example it contains search help KREDY. This search help uses exit F4IF_SHLP_EXIT_VENDOR_FUZZY. It is just a function module.
    Cheers

  • How to Enhance search help for product groups. Currently no ability to add multiple lines from result list

    Hi All,
    In CRM Web UI,  there is no multi selection option for product group id f4 help for Custmer event creation or edit screen under  “Product” tab=> Product Group ID field.
    Web UI Component Details -
    UI component : TPMOE
    View : TPMOE/ProductEOL 
    Context: PRODUCT  Attribute : -PRODUCT_GRUOP
    Click on Product Group ID field then below F4 Help screen appears.
    In the product group results list, user can select only one row and Then all the product will be queried for selected product group, transferred to product list tab.
    Current technical design for Product Group F4:
    a) SE11 Data Dictionary search help “CRM_MKTPL_PGRP1”  is used and data is fetched displayed based it( Refer method GET_V_PRODUCT_GROUP of context node class CL_TPMOE_PRODUCTEOL_CN00)
    b) In UI, F4 pop up is handled by UI Framework in SAP generic manner so no multi selection is allowed.
    c) A round trip event is triggered after selection of row from results which reload view with queried product result based group selected.
    Requirement :-
    In the product group F4 results list View, user should be able to select multiple row .As SAP GUI has the option of multiple entry selection from search help window with the help of field called MULTISEL.
    System should query for products  with all selected product group, transferred to product list tab.
    Note: - The multi select options works fine for GUI, but for UI standard SAP code ignores this or never is this structure taken into consideration. Standard class to display F4 help on UI is CL_THTMLB_F4HELP.
    Can we enforce same behavior like DDIC search help in Web UI too  Or suggest how we can achieve this requirement?
    Thanks in advance
    Regards,
    Arjun

    Hello All,
    We have achieved this requirement by Custom development and approach followed as  -
    Define UI object model zprgrp & zprgrpquery and object relationship in table ZCRM_OBJTAB
    Query Strcuture : ZCRMST_PRGRP_SEARCH & Result List structure : ZCRMST_PRGRP_RESULT      
    Created Custom component : ZPRGRP with Search /Result view and with GENIL Class, search logic
    Defined custom ComponentUsage “ProductGroup1SearchHelp” for ZPRGRP in Standard Component TPMOE
    e.  Called F4 application for field product _group with help component usage created in step d.
    Regards,
    Arjun

Maybe you are looking for