Search Help Within Search help

Hi experts!!
How can i assign a search help to a field of another elementary search help from SE11???
I tried to create a new data element but did not work...

Hi
<b>Attaching a search help to a field</b>
A search help can influence the behavior of a field when the input help is called. The search help must be assigned to the field in order to do this. You have the following options for this assignment:
Attach search help to a data element / table or structure field / screen field / check table.
Conventionally search helps are attached to table fields or data elements. We shall see the same.
1)Choose the field name, click on search help tab and
provide the name of the search help.
A search help is attached to a field of a table or structure in the maintenance transaction for this table/structure, analogously to attaching to a table. You must assign the interface parameters of the search help to any fields of the table/structure. The search field must be assigned to an EXPORT parameter of the search help at this time.
2)Attach the search help to the table field
3)The search help ZSTRAVELAG_NAME is therefore directly attached to the field AGENCYNUM of table ZSTRAVELAG.
<b>Attaching a search help to a data element</b>
Provide the search help name and the parameter name
under the further characteristics tab of the data element.
If the input help of a field is defined by its data element, no further screen fields can be used in the input help.
Also note that the input F4 help would be available wherever the data element is used.
<b>Attaching a search help to a screen element</b>
A search help can be directly assigned to a screen field in two ways.
The name of the search help must be entered in the Screen Painter in the Attributes for the field in the field Search help.
The name of the search help can be defined for selection screens in ABAP reports in the PARAMETERS or SELECT-OPTIONS statement directly following the supplement MATCHCODE OBJECT.
However, input help is only available for this particular screen.
Reward if usefull

Similar Messages

  • Search help with new selection within if more than 500 entries

    Dear all,
    I created a new search help and this works fine ... If I compare my search help with a default search help from SAP,  I have 1 small feature that not seems to work ... With the default one, it is possible to make a new selection within the search help by clicking on the arrow down :
    If I look at my search help, I don't have the possibility to make a new selection :
    Does anyone how this can be done ?
    Thanks in advance !
    Greetz,
    Kurt.

    HI,
    Here are the general steps to get you started.
    1. Identify the search help being used (on the ship-to-party field, F1 then Tech Info). I believe you want the collective search help SD_DEBI.
    2. Create your own search help with the fields you want to use with SE11, like 'ZDEBI' as an example.
    3. Append 'ZDEBI' to SD_DEBI. (Goto->Append Search Help).
    4. Clean things up by "Hiding" the old search help. In the 'Included Search Help' tab of the collective search help SD_DEBI, there is a check box that you can tick to hide included search helps.

  • Anyone help? I click on buttons within websites and my mac opens new webpages advertising, mac keeper pro or some foreign exchange trading platform. Did i pick something hop in a download? how do i search for and get rid of this annoying infiltration?

    Anyone help? I click on buttons within websites and my mac opens new webpages advertising, mac keeper pro or some foreign exchange trading platform. Did i pick something hop in a download? how do i search for and get rid of this annoying infiltration?

    You've installed some form of adware. Take a look here:  http://www.thesafemac.com/arg/

  • Include own search help within new partner role (SRM 7.0)

    Hi,
    1) I have defined an own Partner Function and Partner scheme for Contracts.
    2) I have defined an own table with partners and description (z-table).
    3) I have defined an own search help including the own z-table.
    4)I have included my own search help to the new defined partner scheme (spro --> cross application Basic settings --> Define partner schema --> partner determination procedure --> Search help name (own search help)
    If I start a contract in the system, I can see my new partner Function within header data -> so far so good.
    Also my own searchhelp is included, I can see the defined partners within my own z-table using F4 help.
    Problem:
    Partner ID and Description from Z-Table are not returned to Web Dynpro after selecting one partner from my result list.
    Question:
    How do i define a correct customer search function including an own table for partner functions/schema?
    Do I have to use a search exit within my search help to return the Partner Id and Description correctly to the contract fields?
    SRM standard seems to use the follwing exit:
    BBP_F4IF_SHLP_EXIT_CLL_PARTNER
    Any help concerning this issue is highly welcome
    Thanks and best regards
    Andreas

    Hi
    We can create the Contact person for the vendor with the following roles in SRM 7.0
    SAP_EC_BBP_ADMINISTRATOR-->SAP SRM: Administrator
    SAP_EC_BBP_PURCHASE-->mySAP SRM Purchaser
    SAP_EC_BBP_ST_PURCHASER -->SAP SRM: Strategic Purchaser
    Select the vendor created by you from the 'Business partner' page and click on 'Create Contact person'.
    Enter the details required as per the requirement and save.
    Regards,
    Chandolu Ramesh

  • SY-TABIX within a search help exit...

    Hallo all,
    I tried to find an answer in earlier postst, but did not succeed, therefore this message.
    I have built a customtabel with several columns. For one of the columns I have built a custom search help, including some coding in the search help exit. In this coding I want to do a different selection based on the value in another column (BUKRS) of the same table. Do you understand what I mean?
    The trick is to retrieve the right value of in the column BUKRS in the same line of the table, at the moment I am pushing F4 for another column.
    And I dont know how to do this. I dont have the right SY-TABIX value, so this is not helping.
    Does anybody have an idea as how to tackle this?
    Kind regards,
    Erik

    Hello Francois & Holger,
    Thanks for the reply, but Iu2019m calling this searh help from the transaction SE16 itself, so I donu2019t have my own table control. I am also using the search help in another situation (from a custom-made screen) and here I can pass on the value via a parameter, but this is not working in the case I described.
    So the SY-STEPL is not working too....
    Kind regards,
    Erik

  • Search Help for classification chars. based on external tbl within E.DMS

    Search Help for classification chars. based on external table or
    function moudle are not supported from E.DMS Gui.
    We would like to get F4 functionality like standard SAP Gui (select a
    value from a dynamic list of an existing SAP table).
    I have followed the instructions to the following note 903827.
    Is there any Idea?

    Hi,
    It seems like you need to go for C++ custom Addin  Devlopment.
    Regards,
    Anil.

  • Help creating a search field in my website for users to search within my site

    Hello .
    Basically i want a search field in my website so visitors can search withing my website for what they are looking for .
    Here is an example website of how i want my search field (search field top right if website)
    http://www.asos.com/
    So if any one can let me no what code i need or what i should do to make this search field happen .
    Im using dreamweaver cs4 . Doing the website in html and using css .
    Thanks allot .
    Rob .

    Go to Freefind.com.  Their free search engine has a few text ads on the results pages.  The paid version is add free.  Customize the look, and search features any way you wish.  After they spider your site (usually within 24 hours), people will be able to search your site. You can see a working example on my site alt-web.com
    Zoom from Wrensoft -- free up to 50 pages with tiered pricing for larger sites. Also works on intranets and CDs.
    And of course there's always Google 
    http://www.google.com/cse/
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb
    http://alt-web.blogspot.com

  • Help with search within pl/sql code

    Hi All,
    Can you please help me to find all the objects with a database link.
    I have some procedures,function and packages which uses database link. I need to fetch all the objects that uses a database link. Is there any way to get the list of object names using any database link?
    Thanks in advance
    Apppreciate your help!
    Thanks
    Bob

    hi there,
    the problem with dba_source is that the code might be wrapped.
    another possibility is to query dba_dependencies, column referenced_link
    Also you can have pl/sql routines that create dynamically code and might use dblinks in their dynamic code.
    So you might not be able to be 100 percent complete.
    HTH Mathias

  • Help me about Searching for a Substring within a String

    Hello everybody,
    I have a problem like this:
    Assume i type a sentence from keyboard: "I want to play football"
    And computer will look for the word "football" to see if this word is in that sentence.
    In this case, computer found it.
    That is it ! Could anybody help me about this ?
    Thank you very much in advance.
    still_learn

    Use the String.indexOf() method:
    String original = "I want to play football";
    int result = original.indexOf("football");
    if (result != -1)
    System.out.println("computer found it");
    If the word "football" is in the original String, the indexOf() method will return the index of the word. If it does not find the word "football", it will return a value of -1. The String API is full of useful methods.
    fitz

  • When searching files within folders does not show all? Plz help

    This problem occured recently, few days back.
    When searching a name or extention it does now show all the files with the same name or extention?

    Figured it out I used straight serial cable. put null modem adapter solved the problem.

  • How Can I get multi column values from dynamic search help?

    Hi Gurus;
    I'm using dynamic search help in my program.
    I want to get multi column values from search help. But I dont know solution for this issue.
    I'm using F4IF_INT_TABLE_VALUE_REQUEST FM.
    How Can I get multi column values from dynamic search help?
    Thanks.

    Believe it or not, the same FM worked for me in a dynpro. I will try to explain here how it works in custom screen and then you can do your work for other screens or program types. I am not going to write my actual work but will explain in general.
    I have 4 fields (FLD1, FLD2, FLD3, FLD4) and i made the search based on FLD2 and when user click on a line (could be any field), then this would bring the line on to the screens.
    There are like 3 steps.
    You have your value_tab for my fields FLD1, FLD2, FLD3 and FLD4. This is just the data that we pass into the FM. (data: IT_VALTAB type table of ZVAL_TABLE)
    Next map the screen fields into an internal table (data: It_dynpfld type table of dselc ). I also have other internal tables defined  (just to keep it straight, i will be putting here) data:  It_return type standard table of ddshretval.
    Next step is to call the function module. Make sure you have values in IT_VALTAB.
    call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
            retfield        = 'FLD2'
            value_org       = 'S'
          tables
            value_tab       = It_VALTAB
            return_tab      = It_return
            dynpfld_mapping = It_dynpfld
          exceptions
            parameter_error = 1
            no_values_found = 2
            others          = 3.
        if sy-subrc <> 0.
          message id sy-msgid type sy-msgty number sy-msgno
          with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        else.
          perform get_selected_fields tables It_return.
        endif.
    The code within the perform GET_SELECTED_FIELDS  - We need to map the result fields after user selects it. The code goes like this. This is step is to update the dynpro fields.
    I need a internal table as well as a work area here. like,
    data: lt_fields type table of dynpread,
            la_fields type dynpread.
      field-symbols: <fs_return> type ddshretval.
    so fill out LT_FIELDS from the IT_RETURN table
    loop at lt_return assigning <fs_return>.
        la_fields-fieldname = <fs_return>-retfield.
        la_fields-fieldvalue = <fs_return>-fieldval.
        append la_fields to lt_fields.
        clear: la_fields.
      endloop.
    Call the FM to update the dynpro
    call function 'DYNP_VALUES_UPDATE'
        exporting
          dyname               = sy-repid
          dynumb               = '1002' "This is my screen number. You could use 1000 for selection screen (hope so)
        tables
          dynpfields           = lt_fields
        exceptions
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          undefind_error       = 7
          others               = 8.
      if sy-subrc <> 0.
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
    good luck

  • Dynamically passing the values to search help

    hi
    can I pass some values dynamically to search help input field.
    If I select a profit centre value from a drop down in separate field it should reflect the corresponding values in
    search help which is cost centre input field ( i/p fields is in a column of a UI element table).
    If I add one more row also the corresponding column should bears the search help...
    thanx in advance.......

    Data dictionary based search helps can have multiple importing parameters within Web Dynpro.  There are few rules that are documented in the online help however:
    Be aware that import and export parameters for the search help are determined only within the same context node (see also Transport of Values for the Input Help), and even then only if a Dictionary structure is assigned to the node.
    http://help.sap.com/saphelp_nw70/helpdata/EN/35/bdb6e2c48411d1950800a0c929b3c3/frameset.htm

  • HELP! iTunes reclassified my band's genre and now I don't show up in search results

    I'm sorry if this isn't the right place to post. My problem is fairly unique and I'm just not sure how to go about it. Please point me in the right direction if I've made a mistake.
    Okay, so here's the deal: I'm a musician who releases piano tributes to popular music under the name Molotov Cocktail Piano. My record label, CC Entertainment, has always set my genre category as "Rock." I'm not sure exactly why, but this has been the case since I began recording and releasing last June. Some time within the last week or so, Molotov Cocktail Piano's genre has been reclassified to Pop>Tribute along with many other (but, for some reason, not all) tribute acts, which in and of itself is no big deal to me but now MCP doesn't show up in the search results. My label thought at first that perhaps iTunes was blacklisting the word "tribute" as most of my album's titles use the word. However, I noticed that some other groups' albums that have the word "tribute" in their title still show up. After a closer inspection, I came to the conclusion that any tribute group or artist that has been reclassified to Pop>Tribute doesn't show up and any tribute group or artist whose genre remains unchanged still DOES show up. Take, for example, MCP's "Tribute to Taylor Swift: 1989." Before this switch, anyone choosing to search for "Taylor Swift" could scroll through her official releases and the many tribute albums dedicated to her. My tribute had been selling reasonably well and was listed near the top of the list after her official releases. Now after the reclassification, my album doesn't show up at ALL for the "Taylor Swift" search term, whereas some others still do. I feel certain that this is an unintentional mistake that somehow didn't get addressed when iTunes created the new Pop>Tribute genre and that it just needs to be brought to the attention of the right person to make what would seem to be an easy fix. In the mean time, however, I am losing sales with every passing day and iTunes is losing their percentage on those sales. The timing is just terrible, with the Christmas season upon us. Could someone PLEASE help?
    Sincerely,
    Rob Weber

    when you play the CD in your laptop on your home screen a Cd should pop up under the name of the album. Than when you open itunes it will probly say something like "let this CD download" or something like that. If it doesn't than automaticlly while the CD is importing to your itunes a page will pop up with a progess of the CD download.
    Hope that helped.

  • Can I have a Text Search in HTML Help output?

    Hello,
    I'm relatively new to Robohelp and while testing the possible output methods I found that there is no internal text search function available for the Microsoft HTML Help (.chm) file.
    Does anyone know if it is possible to enable this function?
    Thank you
    Holli

    Hi Holli
    Perhaps try creating a brand new window?
    Make sure Microsoft HTML Help is your Primary Layout by right-clicking it in the Single Source Layouts recipe box.
    Then open the Project Set-up pod and create a new window.
    Then in the Single Source Layout recipe, make sure you choose the new window you just created.
    Recompile and check.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Adding a new field to the search help exit

    Hi friends,
    adding a new field to the search help exit. How does it work ?
    Thanks in advace
    Ilhan

    The search help exit allows you to modify functionality of search help. If you add a new field to the
    parameter list that is not contained on the selection method you can manually populate it within the search
    help exit.
    This  would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
    data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
    Therefore you need to read table SHLP in-order to locate position of value within string.
    Example:
    To find position of personnel number (PERNR) within elemenory search
    help M_PREMN you would use the following code:
    Loop at record_tab.
         read table shlp-fielddescr into wa_shlp
                                       with key tabname   = 'M_PREMN'
                                                fieldname = 'PERNR'.
    You could then use this information in the following way, for
    example, to find a persons organisation unit:
          select  orgeh endda
            up to 1 rows
            from pa0001
            into (ld_orgeh,ld_endda)
           where pernr eq record_tab-string+wa_shlp-offset(8)
                                                      u201Cpernr length is 8
           order by endda descending.
          endselect.
          select single orgtx
            from t527x
            into ld_orgtxt
           where orgeh eq ld_orgeh and
                 sprsl eq sy-langu and
               ( endda ge sy-datum and
                 begda le sy-datum ).
    If you have added a new field to the end of the parameters list
    the next step is to populate it by adding this data to the end of
    the record_tab string:
      concatenate record_tab-string ld_orgtxt into record_tab-string.
      modify record_tab.
    endloop.

Maybe you are looking for