Search in Outlook 2010 with Exchange Server 2010 doesn't work properly
Hi all,
I have a problem with a clients Exchange 2010. Search function in Outlook 2010 doesn't work properly, the employee can't search mails and contact - he doesn't get any result :-(
In application syslog/protocol I get this error:
Function 'CISearch::EcGetRowsetAndAccessor' found, content indexing for database 'Mailbox Database 0139257080' caused by MSSearch-Error '0x80041820' deactivated
Can anybody help me with this, if its necessary I can give further information :-)
Thomas
Thomas Deinert
Hi,
What’s Exchange Version? Sometimes, after Installing Exchange 2010 SP 1, Searching via OWA or Outlook Online Mode may Fail. If so, please try the following solution:
Download the script
Repair-ExchangeSearchSymlinks.ps1 from the Script Center.
Copy the Repair-ExchangeSearchSymlinks.ps1 script to the Scripts directory on the Mailbox server (default installation is C:\Program Files\Microsoft\Exchange Server\v14\Scripts).
On the afflicted Mailbox server, open the Exchange Management Shell by right-clicking the shortcut and selecting “Run as Administrator”.
Within the Exchange Management Shell, navigate to the Exchange Scripts directory.
Within the Exchange Management Shell, run the following script: .\Repair-ExchangeSearchSymlinks.ps1
Within the Exchange Management Shell, run the following script (without the symbols [] and substitute the database name(s) for any databases you wish to reset: .\ResetSearchIndex.ps1 [-force] <dbname> [<dbname>]...
You will receive an Event ID 109 when the rebuilding of the index starts for each database and an Event ID 110 for each database when the index rebuild has completed.
After receiving Event ID 110 for each database, test to make sure search functions correctly with both OWA and Outlook operating in Online Mode.
Similar thread:
https://social.technet.microsoft.com/Forums/exchange/en-US/35db030c-277f-49d6-83d6-772f839a47f8/owa-2010-sp1-search-problems?forum=exchange2010
Best Regards.
Similar Messages
-
All sub-folders in Mac Mail cannot synchronize with Exchange Server 2010
Hi all,
All sub-folders under Inbox in Mac Mail cannot be synchronized with Exchange Server 2010. There are 2GB messages size in Inbox folder and 500MB messages size under Inbox's sub-folders. All messages can be sent out and received and it can work in Outlook 2007 and Outlook 2010 normally. However, all messages in sub-folders cannot be synchronized (empty sub-folders).
Does this problem relate to message synchronization order of Mac Mail with Exchange Server? Do all sub-folders messages be synchronized after synchronization complete of Inbox? The synchronization of sub-folders will not happen if the synchronization of Inbox does not complete, doesn't it?
All messages synchronization is over internet. Can anybody help?
Thanks a lot
DT1640759Hi,
1.please check the mailbox send and receive quota for exchange 2013 migrated mailbox.
2.Please check the email attributes of the exchange 2013 migrated mailbox because it seems to be a problem with that particular mailbox.
3.Then do the message tracking and that would be the only way to find the where the send messages has gone.
4.Please check and confirm you have an enough space on the disk where exchange queue database is residing.
I think I need to create a receive connector in the 2013 to receive from 2010 ?
No need ,by design exchange 2013 cas server default frontend receive connector will be having an
entire ipv4 and ipv6 segment and anonymous connection is checked by default.
I think I also need to create a send and receive connector for 2013 users to each other?
No need , an intra organisation send connector and the default receive connectors in exchange will be used
for internal mail flow between the exchange 2013 users.
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham -
How do I get macmail to work with exchange server 2010?
my company upgraded to exchange server 2010 and since then, I can't access ical shared calendars. I've been forced to switch to Outlook for my email client at work. Now I can't receive email at home using macmail. Is there a way for macmail to work with exchange server 2010?
Intel tower running snow leopard 10.6.8 with the latest version of macmail.
Any insight into this problem is greatly appreciated.
Thanks very much.Hi,
Please refer to the following link http://forums.adobe.com/docs/DOC-3581
For changing the HTTP, you need to do it outside the muse after exporting the site or after uploading it to godaddy.
Regards,
Aish -
KB953804 Full title "Hotfix for An e-mail message does not appear in a user's mailbox if the e-mail message was sent on behalf of the user by a delegate in Outlook 2003."
We have this working for ok Outlook 2003 SP3 in combination with Exchange Server 2003 SP2. Now for mailboxes that are moved to our new Exchange 2010 environment the hotfix stopped working. The sent items get stuck in the outbox of the delegate instead
of moving to the user in whose name the mail was sent. It does not matter if the user mailbox is on 2003 or 2010 as long as the delegated user is on Exchange 2010 SP1 it fails. We use Outlook 2003 SP3 in online mode. Does anyone know how to fix this
or maybe someone knows an alternative way to move the mails to the sent items with Exchange2010 SP1.Hi,
I'd like to know how did you set "send on behalf",from outlook give delegation permission or from Exchange Server give "send as" right?
Please try to use get-adpermission to verify if the user has "send as" right.
Manage Send As Permissions for a Mailbox
http://technet.microsoft.com/en-us/library/bb676368.aspx
Note: After you grant send as right, please try to restart Microsoft Information Store.
By the way, do you receive any NDR or error information when you send on behalf of others?
Xiu -
Mail Delivery betweek Exchange Server 2013 co-existance with Exchange server 2010
Hello Guys
I have a mailflow issue, hoping someone can help with detail description, below is the setup
Exchange server 2010 SP3 with all roles in one server
Exchange server 2013 SP1 with CU6 with all roles in one server - this server is in a different subnet to the 2010 server. I am able to see exchange 2010 databases and mailboxes from Exchange 2013. For testing purposes, I have moved 3 mailbox from 2010
to 2013. These 3 mailbox, is able to send and receive email from Internet but to each other via OWA or Outlook. These 3 mailbox also not able to send to receive email from any mailbox that is still in 2010 server via OWA or Outlook. I am not planning the whole
server cutover in a go and planning to do state by stage mailbox migration so I need mailflow working properly. When I send an email from one of the migrated mailbox that is in 2013 server, I can see that the email leaves the mailbox outbox and sits in the
queue ..
Can someone please provide detailed solution what needs to be configured?
MCITP, MCSA, MCSE,VCP - Consultant, Solution Design, ImplementationHi,
1.please check the mailbox send and receive quota for exchange 2013 migrated mailbox.
2.Please check the email attributes of the exchange 2013 migrated mailbox because it seems to be a problem with that particular mailbox.
3.Then do the message tracking and that would be the only way to find the where the send messages has gone.
4.Please check and confirm you have an enough space on the disk where exchange queue database is residing.
I think I need to create a receive connector in the 2013 to receive from 2010 ?
No need ,by design exchange 2013 cas server default frontend receive connector will be having an
entire ipv4 and ipv6 segment and anonymous connection is checked by default.
I think I also need to create a send and receive connector for 2013 users to each other?
No need , an intra organisation send connector and the default receive connectors in exchange will be used
for internal mail flow between the exchange 2013 users.
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham -
Free Busy takes over 30 seconds to retrieve on Outlook 2010 using Exchange Server 2010
We have a small 100 user domain running Exchange server 2010 and outlook 2010 clients. The issue is that Retrieving Free/Busy takes over 30 seconds.
So someone is trying to schedule a meeting has to wait Minutes see the Free/busy time for many users.. I have checked and all the users in question have published at least one month free busy time.
It seems it would be much faster. Anyone have this same experience and know of a way to speed it up?
thanks in Advance
DavidHi David,
Does the issue happen in OWA? In Exchange 2010, the free/busy information is retreved by using Availability service (EWS url). Generally, if a user wants to view free/busy information when create a meeting, the http Availability service request
would send to CAS server.
Please check whether the usage in Exchange server is high when the slow free/busy information occurs. This reflect time would also be related to the network in your environment.
Regards,
Winnie Liang
TechNet Community Support -
Documentation for getting Webcenter PS4 to work with Exchange Server 2010.
I have a customer who has Microsoft Exchange Server 2010 and wants to have their e-mail in WebCenter Spaces app we have built, using 11.1.1.4 or 11.1.1.5. Do either of these support Xchange Server 2010? Probably not, right? Well has anybody done it and been able to get it to work? Is there any documentation out there that tells how to do it?
Thanks,This documentation is great. Thanks,
Is there any documentation on this for 11.1.1.6? (PS5)? The documentation you gave me is 11.1.1.5 and it shows Exchange Server 2007. My customer has Exchange Server 2010. Do you know if 11.1.1.5 and/or 11.1.1.6 supports Exchange Server 2010?
Again, thanks for your help. -
Mac Reminder (Mountain Lion) cannot sync with Exchange Server 2010
Hi All,
My boss is using iMac reminder (Mountain Lion), iPhone and iPad sync with his Exchange Server account, He cannot sync Mac reminder with Exchange Server last week. However, there are no sync problem of iPhone, iPad and the other iMac.
My boss mail to me 'Just noticed that my iMac reminder is not in sync with the server. IOS device is in sync though. Tried unchecking calendar+reminder on account setup and rechecking but still no good. Any ideas?'
Could anyone help me?
Thanks,Started experiencing this same issue with new Macs on Moutain Lion connecting to MicroSoft Exchange Server.
ERROR Says:
Calendar can't save the event "event name here" to the Exchange server.
The account "describes calendar name" currently can't be modified. to discard your changes and continue using the version of your calendars that's on the server. click Revert to Server.
Then gives the buttons "Revert to Server" "Try Again" or "Ignore"
!!! Somehow it seems like this is a known issue, otherwise WHY would Apple have given us those 3 buttons to click on?
Needless to say this is causing productivity problems as it disrupts the very busy schedule of many users. Apple needs to provide some workaround for this. -
Outlook 2013 with Exchange Server - Changed custom form for contacts is not shown
Hello,
Our infrastructure:
Exchange Server 2010
Outlook 2010
Outlook 2013
Windows 7 Pro, Windows 8 Pro and Windows 8.1 Pro
The situation:
We've used an old custom form for contacts, worked perfectly fine
I've updated the form (adding some new custom fields and checkboxes) using Outlook 2013 and publishing the form (with a new name) to the Exchange folder
I've set the form as default form in our contacts folder
I've used this Script to set the new form for the existing contacts and the name of the new form is saved correctly
BUT if I open a contact in our Exchange contacts folder, Outlook 2013 (Outlook 2010) still shows the old form
Steps I've taken so far:
Cleared Outlook forms cache
Repeated the above steps 1-4 in Outlook 2010
Switched Cached Exchange Mode off and back on
Allowed Scripts in Trust Center Settings
Used a new clean Windows installation with a new Outlook 2013 installation
Used different Exchange users on different systems, but some behavior when opening contacts
I'm out of options I can think of, so maybe somebody else has some new view on this problem.
Thank you very much in advance!
Greetings,
KarlHi,
Is the Exchange folder in which the custom form is published available to all users?
From the description, the script used to work for the old custom form, correct? Which version of Outlook did you use with the old custom contact form? Outlook 2010/Outlook 2013 or an earlier version? If you used the script with an earlier version of Outlook,
we can't make sure it will still work with Outlook 2010/Outlook 2013.
In addition we may also try creating a new contact form and test the steps to see if it will work.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Problems using Outlook 2013 with Exchange Server Small Business Server 2003
Hello,
We have just upgraded our Office suite from Office 2007 Pro to Office 2013 Pro. When I try to configure Outlook 2013 to connect to Exchange Server 6.5 (SMS 2003) I get an error "Outlook 2013 being blocked by current version of Exchange Server".
Outlook 2013 at present is not communicating with Exchange server 6.5
Are there any fixes I have to install on our SMS 2003 server to allow Outlook 2013 to work with SMS 2003 Exchange Server?
Any configuration changes I need to make? Any help is appreciated.
Thx
John G.
John GraceHi
Outlook 2013 is not supported with exchange 2003:
http://technet.microsoft.com/en-us/library/ee624351.aspx#section10
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
How to setup microsoft outlook 2011 with exchange server 2007
How to setup microsoft outlook 2011 for Mac with Exchange server 2007?
The folks who set up the Exchange Server should be happy to help you.
-
Delayed received emails Using Outlook 2010 and Exchange Server 2010 SP3
Hi,
Some of our users are encountering delayed emails. When our clients sent email to us, some of our clients received this an hour late, sometimes they will received this the next day.
Our users uses Outlook 2010 and our Exchange Server is 2010. We have already patch this to SP3 as it says that the delayed emails was already fixed in this SP3 but we still encounter the delayed emails.
Thanks.
Collins.Hi Collins,
In order to narrow down this issue, please use OWA to send and receive a test email, see whether the delay will still happen or not.
From your description, the issue happens when certain users receive emails from internal. I recommend you use message tracking log to determine which step delays.
Here is an article for your reference.
Configure Message Tracking
http://technet.microsoft.com/en-us/library/aa997984(v=exchg.141).aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support -
Mac performance with Exchange Server 2010 SP1
Hi All,
I have some issue with Mac OS X 10.7.2 performance with when setting up new email connection Microsoft Exchange Server.
1) Use Apple Mail to create a new EMAIL account for an Exchange Account using Auto discover. Note how long it takes. In my case, it takes almost two full minutes or more until it comes back and is fully set up (and starts synchronizing the server folders).
2) Now use Apple mail create a new EMAIL account MANUALLY -- just don't fill in the password... keep hitting Continue until it shows the POP setting. Select EXCHANGE and then fill in the appropriate details (mail.mydmain.com, check SSL enabled, etc.). Setting up an account this way takes only a few seconds.
3) Use Microsoft Outlook 2011 for mac to create new Email account for an Exchange using Auto discover. it takes few second to completed.
I can summarize that:
- Use Apple Mail to create a new EMAIL account for an Exchange Account using Auto discover: Slow
- Use Apple mail create a new EMAIL account MANUALLY: Normal
- Use Microsoft Outlook 2011 for mac to create new Email account for an Exchange using Auto discover: Normal
In any case, do you have any solution to fix this issue.Hi,
I'd like to know how did you set "send on behalf",from outlook give delegation permission or from Exchange Server give "send as" right?
Please try to use get-adpermission to verify if the user has "send as" right.
Manage Send As Permissions for a Mailbox
http://technet.microsoft.com/en-us/library/bb676368.aspx
Note: After you grant send as right, please try to restart Microsoft Information Store.
By the way, do you receive any NDR or error information when you send on behalf of others?
Xiu -
Mac calendar (Mountain Lion) cannot accept an invitation with Exchange Server 2010
Hi all,
My boss are using Mac calendar (Mountain Lion) sync with his Exchange Server account, User sent him an invitation. When he tried to accept all invitations, an error message appear:
Your calendar couldn't be refreshed. There was an unexpercted error with the request (domain EWSExchangeWebServicesErrorDoma / error 285)
Could anyone help me to solve?
ThanksStarted experiencing this same issue with new Macs on Moutain Lion connecting to MicroSoft Exchange Server.
ERROR Says:
Calendar can't save the event "event name here" to the Exchange server.
The account "describes calendar name" currently can't be modified. to discard your changes and continue using the version of your calendars that's on the server. click Revert to Server.
Then gives the buttons "Revert to Server" "Try Again" or "Ignore"
!!! Somehow it seems like this is a known issue, otherwise WHY would Apple have given us those 3 buttons to click on?
Needless to say this is causing productivity problems as it disrupts the very busy schedule of many users. Apple needs to provide some workaround for this. -
Ipod nano 1st generation with SW1.3.1 doesn´t work properly
as a positive thinking person I followed the recomendations in iTunes 7.5.. and downloaded SW 1.3.1 on my 1st generation nano. The consequnce was that this dammed thing now frequently stops playing(every few minutes max. 15 min). It either jumps back to the main menue and I have to start the song again or it freezes and I have to boot ( middle + menue key) or it reboots by itself.
Have gone through all the 5Rs and the online service, tried to send a message to service, but this was not available and the message was gone. I do not find an older SW version. After hours I am really pi...
Had functional problems during warranty period. Sent it in with new SW it worked properly until last weekend......
Can anyone help. Has anyone made similar experience?Hello Forum Users et al,
I know this Updated Post follows shortly after my previous post, but I have a useful piece of info. that others may wish to check on.
I have been using a video: www.video.com/12348372 as my test case for which the video comes on and then proceeds to not work. If I click on the "arrow" in the bottom left corner of the video, the video screen goes "black" and nothing happens immediately. But, here is the important information. If I wait, then the video reappears, but sounds alternately starts and stops.
What I did for the last several hours was to minimize the email containing the video, and I noticed that the sound alternately came on and off. But, after over two hours, the video started to play normally (total time for video is about 4 mins.) When it gets to the end, the original "start arrow" appears. I have repeatedly played this video after the two-hour period of erratic play, and it played normally.
This event happened one time over a week ago when I was on "Live Chat" with Adobe FP. I was reporting my problem with FP with Mang Son while I had the video minimized, and, embarrassingly, the video started to work normally! What could I say?! I told him essentially that it looked like it was working, and I closed it out. However, after this, I closed the email containing the video and tried to open the video from scratch, again. Once again, it started to play erratically, even though it mysteriously was playing normally while I was on "Live Chat".
Users may want to use the video that I cited and see what happens. It is still a mystery why the video won't work for hours and then all of a sudden start working. I also had similar trouble with YouTube videos.
Best regards,
bookwilliam
Maybe you are looking for
-
The Group Policy client-side extension Scripts failed ...
This is an error I've been seeing forever and it was always the impression that upgrading would resolve it, but it never has even in 10.3. 100% of our users get these errors in the Event Viewer: Event Type: Error Event Source: Userenv Event Category:
-
Music player not working properly!!!
Yea I'm becoming really frustrated with the new ios7. I listen to alot of music, after upgrading to the new ios, the music player sometimes locks up or doesnt play songs at all. If I move the scrubber bar to the middle of the song, then it resets it
-
Why are calculation functions lost from Reader Extended PDF when downloaded from website?
I am creating PDF forms with most fields performing calculations. I am saving the forms out as Reader Extended PDF> Enable Additional Features. When I email the form there is no problem with the person using the form, all calculations work. The perso
-
How can I get Time Machine to eject drive
Since I installed Mavericks, I can't eject my 1 TB Seagate external Drive that I use for Time Machine. I get a message that it is in use by another program and can't be ejected. I can only eject by "force ejecting". Drive is connected via USB. Time m
-
7921 not registering with CME through repeater
I have this environment: CME 7.0 running in Cisco2851. WLC2106 with 6 1242 APs 15 phones 7921 I have to extend the wireless coverage to an specific point (warehouse), 150 meters away. This point only have a PC and a phone, so I don't think a bridge i