Search not working when using mobile data

DescriptionWhen using mobile data, every time I try to search for tracks, I get the 'error occurred' message. A more detailed description, using numbered steps1. Be using mobile data as opposed to wifi2. Use search function What I expected to happenSee my search results What actually happenedSee 'an error occurred' message. Important - even though the screenshot shows 1 'bar' of signal on 3G, this problem occurs regardless of signal level. I've tried to search using full-strength 4G and still seen this problem. My iPad/iPhone modeliPhone 6 / 64GB Device’s Operating SystemiOS 8.4 (12H143) Is your device jailbroken?No Approximately how many playlists do you have?More than 200 My mobile Spotify version3.5.0.1069 My desktop Spotify version (if applicable)1.0.10.107.gd0dfca3a My provider and countryEE UK My usernametombot18 Do you have any screenshots you can attach to more clearly explain your issue?See attached screenshot

I have the same problem.... anything fix it?

Similar Messages

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

Create a group and send mail
http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best.

Photoshop CC. Colour selection not working when using alt and brush.

Hi, Photoshop CC. Windows 8.1 64 bit. Colour selection not working when using alt and brush. I have tried rebooting and other things like closing swatch panel etc.
The alt key is otherwise OK. It's not the recent upgrade from Win 8 to 8.1 (5 days ago) because the colour selection facility was working yesterday. Any ideas.

I'd say things sound desperate enough to try resetting Preferences
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop
If that fails, we need to know your operating system?
Do you have a full CC subscription, or by apps do you mean Photoshop, Bridge and Lightroom?
Another other information that might pertain ?

Siri does not work when used for calling a contact function

Siri does not work when used for calling a contact function

Very strange, try to turn off/on your iPhone. Or make a reset (home+power button)...
If it continues try to restore it.

HT204168 touch screen function not working when using facetime

Why is my iPad touch screen function not working when using FaceTime?

Hi megascones,
I apologize, I'm a bit unclear on the exact nature or scope of the issue you are describing. If you are having issues with the touch screen on your iPad, you may find the troubleshooting steps outlined in the following article helpful:
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Regards,
- Brenden

Why is my touch screen function not working when using facetime

Why is my touch screen function not working when using facetime

Hello megascones,
After reviewing your post, it sounds like the screen is not responding to touch in one app. I would recommend that you read this article, it may be able to help the issue.
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Restart your device. If you can't restart, reset your device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Lenovo S8-50LC Wlan(WiFi) Does not work when use Sim Cart(3G)

Hi
Tablet Lenovo S8-50LC
Wlan(WiFi) Does not work when use Sim Cart(3G).
What is the solution for this problem?
Build Number : TABS8-50LC_S000200_150121_ROW
SoftWarw Version : TABS8-50LC_150121

Right, but if you have the SIM in the tablet and you put the tablet in airplane mode, does wifi work then? If so, it may be a bad SIM. Do you have another SIM you can try?

Why does diadem intellisense not work when using scriptinclude or for global object

I have a script with a different classes in it (scripted 1). When I create an object of a class in the script 1 intellisense works. Intellisense is when you type name of the object created from a class it shows all the possible variables and functions contained in that object. But when I write another script and use scriptinclude(scripted 1) the intellisense does not work. I also tried a global object and intesllisense does not work. Is there a way to get intellisense to work when using scriptinclude? I am working with version 2012.

Here is more information on the issue.
I have a script with a different classes in it (scripted 1). When I create an object of a class in the script 1 intellisense works. Intellisense is when you type name of the object created from a class it shows all the possible variables and functions contained in that object. But when I write another script and use scriptinclude(scripted 1) the intellisense does not work. I also tried a global object and intesllisense does not work. Is there a way to get intellisense to work when using scriptinclude? I am working with version 2012.
'Test.vbs
class test
    public function test1()
         msgbox("test1")
    end function
    public function test2()
         msgbox("test2")
    end function
end class
'now create a object of the class
dim oTest
set oTest=new Test
'now when you type oTest. you get the following functions to choose from
oTest.test1
        .test2
Now if you remove the object from Test.vbs and create a main program with scriptinclude(Test.vbs) it will not show the two functions
'Main.vbs
Option Explicit 'Forces the explicit declaration of all the variables in a script.
call scriptinclude("c:\1atmp\Test.vbs")
dim oTest
set oTest=new test
'now when you type oTest. it shows none of the functions in the object oTest
oTest.

Microphone not working when using a phone call, Microphone not working when using a phone call

Microphone is not working when i use my iphone 4, first day when i installed a iOS 7 , was all good, second day this happened. Please help me. When i use a Viber microphone working. I think this is not a hardwear problem.

Hi Mike
That was very helpful thank you.
I did as you suggested and found the "switch" was already turned on green. I swiched it off waited a while then turned it back on and microphone was back in use in viber. I have a sneaky feeling I may have to do this again in the future. I am not aware that I did anything that led to the microphone going off, but having said that I have only had the phone for a few days so may have done something when checking it out.
The phone has been a lot of fun after replacing my ancient Nokia with it. That Nokia worked in Morse code!
Best wishes
Rob

Keyboard backlighting not working when using Windows in Boot Camp

Hi, I'm posting this for a friend with a new Macbook Air. He says that his keyboard backlighting does not work when he is using it for Windows (don't know which, but probably Vista). Any ideas why? Thanks. Gary

Install all the drivers needed when running boot camp - try for example inserting a DVD - then press the eject key - See if it comes out - If it doesn't install all the drivers - try Control Panel - If not try re-installing your version of Windows.

Elements 11 - Brush tool not working when using layer mask

My brush tool won't work when using layer mask in PS Elements 11. I also have Elements version 10 installed and there it works fine. If I do the exact same proces in version 11 nothing happens.
Is this a bug or has something changed in the proces?
Please help.
Thanks.

Make sure you have the mask thumbnail selected - it will be highlighted in blue.

Enter Key Not Working When Using Text Tool

For some reason, my enter key has stopped working when using the text tool. Instead of making a soft return to a new line, it simply commits the type. What is going on here?
I'm using a desktop and CS3.

there are 2 enter keys in key board
if u enter main key board enter, sentence will go to next line
In case u enter the key available in rightside of the key board , in the cluster of numericals, the type tool is committed.

It is not working when use trigger to check data from other table.

Please help me with this, I have put a trigger on a table but it can not work as I expect.
case study: one class has many students, only one of them goes to match.
The purpose of this trigger is to check when choose a student goes to match, this student must in his class where he belongs to.
Version of Oracle is 10.2.0.1.0.
--table:
DROP TABLE STU;
DROP TABLE CLASS;
create table CLASS(
CID     VARCHAR2(5)   PRIMARY KEY,
CNAME   VARCHAR2(20) NOT NULL,
SCHOSEN VARCHAR2(5));
create table STU(
SID     VARCHAR2(5)   PRIMARY KEY,
SNAME   VARCHAR2(20) NOT NULL,
CID     VARCHAR2(5)   NOT NULL REFERENCES CLASS(CID) ON DELETE CASCADE);
--data:
--CLASS
INSERT INTO CLASS(CID,CNAME) VALUES(1,'SUN');
INSERT INTO CLASS(CID,CNAME) VALUES(2,'MOON');
INSERT INTO CLASS(CID,CNAME) VALUES(3,'EARTH');
--STU
INSERT INTO STU VALUES(1,'JACK',1);
INSERT INTO STU VALUES(2,'TOM',1);
INSERT INTO STU VALUES(3,'LILY',2);
INSERT INTO STU VALUES(4,'DUSTIN',3);
--TRIGGER
CREATE OR REPLACE TRIGGER CHECK_SCHOSEN
BEFORE INSERT OR UPDATE OF SCHOSEN ON CLASS
FOR EACH ROW WHEN (NEW.SCHOSEN IS NOT NULL)
DECLARE
DUMMY INTEGER;
INVALID_STU EXCEPTION;
VALID_STU EXCEPTION;
MUTATING_TABLE EXCEPTION;
PRAGMA EXCEPTION_INIT(MUTATING_TABLE, -4091);
CURSOR DUMMY_CURSOR (ST VARCHAR2, CL VARCHAR2) IS
SELECT SID FROM STU, CLASS
WHERE STU.SID=ST AND STU.CID=CLASS.CID AND CLASS.CID=CL
    FOR UPDATE OF CLASS.SCHOSEN;
BEGIN
OPEN DUMMY_CURSOR(:NEW.SCHOSEN, :NEW.CID);
FETCH DUMMY_CURSOR INTO DUMMY;
IF DUMMY_CURSOR%NOTFOUND THEN
    RAISE INVALID_STU;
ELSE
    RAISE VALID_STU;
END IF;
CLOSE DUMMY_CURSOR;
EXCEPTION
WHEN INVALID_STU THEN
    CLOSE DUMMY_CURSOR;
    DBMS_OUTPUT.PUT_LINE('PLEASE RE-ENTER CLASS ID AND STUDENT ID AS CLASS OR STUDENT IS NOT VALID.');
WHEN VALID_STU THEN
    CLOSE DUMMY_CURSOR;
    DBMS_OUTPUT.PUT_LINE('STUDENT CHOOSE SUCCEFULLY!');
WHEN MUTATING_TABLE THEN
    NULL;
END;
/Just copy and paste above and try to run following:
UPDATE CLASS
SET SCHOSEN=3
WHERE CID=1;
Clearly,you can not choose student which is 3 as match member of class 1. Please help me. Thanks.
Edited by: 991096 on 01-Mar-2013 02:36
Edited by: 991096 on 01-Mar-2013 03:03
Edited by: 991096 on 01-Mar-2013 03:11

Hi,
Welcome to the forum!
Like the others, I can't see a business purpose for this trigger. I assume it's just an experiment to learn how triggers work.
991096 wrote:
Please help me with this, I have put a trigger on a table but it can not be triggered.Sorry, I don't understand what you want help with.
Are you saying the trigger doesn't fire? It does fire; it just raises the mutating table error, so you don't see anything.
case study: one class has many students, only one of them goes to match.What do you mean when you say "goes to match"?
--table:
DROP TABLE STU;
DROP TABLE CLASS;
create table CLASS(
CID VARCHAR2(5) PRIMARY KEY,
CNAME VARCHAR2(20) NOT NULL,
SCHOSEN VARCHAR2(5));
create table STU(
SID VARCHAR2(5) PRIMARY KEY,
SNAME VARCHAR2(20) NOT NULL,
CID VARCHAR2(5) NOT NULL REFERENCES CLASS(CID) ON DELETE CASCADE);
--data:
--CLASS
INSERT INTO CLASS(CID,CNAME) VALUES(1,'SUN');
INSERT INTO CLASS(CID,CNAME) VALUES(2,'MOON');
INSERT INTO CLASS(CID,CNAME) VALUES(3,'EARTH');
--STU
INSERT INTO STU VALUES(1,'JACK',1);
INSERT INTO STU VALUES(2,'TOM',1);
INSERT INTO STU VALUES(3,'LILY',2);
INSERT INTO STU VALUES(4,'DUSTIN',3);
--TRIGGER
CREATE OR REPLACE TRIGGER CHECK_SCHOSEN
BEFORE INSERT OR UPDATE OF SCHOSEN ON CLASS
FOR EACH ROW WHEN (NEW.SCHOSEN IS NOT NULL)
DECLARE
DUMMY INTEGER;
INVALID_STU EXCEPTION;
VALID_STU EXCEPTION;
MUTATING_TABLE EXCEPTION;
PRAGMA EXCEPTION_INIT(MUTATING_TABLE, -4091);
CURSOR DUMMY_CURSOR (ST VARCHAR2, CL VARCHAR2) IS
SELECT SID FROM STU, CLASS
WHERE STU.SID=ST AND STU.CID=CLASS.CID AND CLASS.CID=CL
FOR UPDATE OF CLASS.SCHOSEN;
BEGIN
OPEN DUMMY_CURSOR(:NEW.SCHOSEN, :NEW.CID);
FETCH DUMMY_CURSOR INTO DUMMY;
IF DUMMY_CURSOR%NOTFOUND THEN
RAISE INVALID_STU;
ELSE
RAISE VALID_STU;
END IF;
CLOSE DUMMY_CURSOR;
EXCEPTION
WHEN INVALID_STU THEN
CLOSE DUMMY_CURSOR;
DBMS_OUTPUT.PUT_LINE('PLEASE RE-ENTER CLASS ID AND STUDENT ID AS CLASS OR STUDENT IS NOT VALID.');
WHEN VALID_STU THEN
CLOSE DUMMY_CURSOR;
DBMS_OUTPUT.PUT_LINE('STUDENT CHOOSE SUCCEFULLY!');
WHEN MUTATING_TABLE THEN
NULL;
END;
/Thanks for posting the CREATE TABLE, INSERT and CREATE TRIGGER statements; that really helps!
See the forum FAQ {message:id=9360002} for other helpful tips, such as how to use \ tags to post formatted code.
Just copy and paste above and try to run following:
UPDATE CLASS
SET SCHOSEN=3
WHERE CID=1;
Clearly,you can not choose student which is 3 as match member of class 1. The trigger did not be triggered. Please help me. Thanks.You can't do DML, or even query, the class table from a FOR EACH ROW trigger on the same class table.
Add 3 more calls to put_line to see this:CREATE OR REPLACE TRIGGER CHECK_SCHOSEN
BEFORE INSERT OR UPDATE OF SCHOSEN ON CLASS
FOR EACH ROW WHEN (NEW.SCHOSEN IS NOT NULL)
DECLARE
DUMMY          INTEGER;
INVALID_STU      EXCEPTION;
VALID_STU          EXCEPTION;
MUTATING_TABLE      EXCEPTION;
PRAGMA           EXCEPTION_INIT (MUTATING_TABLE, -4091);
CURSOR DUMMY_CURSOR (ST VARCHAR2, CL VARCHAR2) IS
SELECT SID
     FROM      STU
     ,     CLASS
     WHERE     STU.SID          = ST
     AND     STU.CID          = CLASS.CID
     AND     CLASS.CID     = CL
     FOR UPDATE OF           CLASS.SCHOSEN;
BEGIN
dbms_output.put_line (:NEW.schosen || ' = schosen entering check_schosen');     -- ***** NEW *****
OPEN DUMMY_CURSOR (:NEW.SCHOSEN, :NEW.CID);
dbms_output.put_line ('Cursor is open now.');     -- ***** NEW *****
FETCH DUMMY_CURSOR INTO DUMMY;
IF DUMMY_CURSOR%NOTFOUND THEN
RAISE INVALID_STU;
ELSE
RAISE VALID_STU;
END IF;
CLOSE DUMMY_CURSOR;
EXCEPTION
WHEN INVALID_STU THEN
CLOSE DUMMY_CURSOR;
     DBMS_OUTPUT.PUT_LINE ('PLEASE RE-ENTER CLASS ID AND STUDENT ID AS CLASS OR STUDENT IS NOT VALID.');
WHEN VALID_STU THEN
     CLOSE DUMMY_CURSOR;
     DBMS_OUTPUT.PUT_LINE ('STUDENT CHOOSE SUCCEFULLY!');
WHEN MUTATING_TABLE THEN
DBMS_OUTPUT.PUT_LINE ('MUTATING TABLE');     -- ***** NEW *****
     NULL;
END;
Output, when trying to UPDATE class:3 = schosen entering check_schosen
MUTATING TABLE
1 row updated.
Obviously, the trigger fired, since you see the message "3 = schosen entering check_schosen"
Obviously, the OPEN statement raised an error, since you don't see the message 'Cursor is open now.'
Obviously, the mutating table error was raised, since you see the message 'MUTATING TABLE'.
So the trigger fired, and went to the EXCEPTION handler almost immediately. The EXCEPTION handler printed a message, as instructed, and the trigger ended. Then the actual UPDATE took place.
I hope this answers your question.
If not, what is your question? It may be very clear to you, but a complete mystery to others. Ask clear questions, such as "Why did ... happen? I thought ... would happen, be ... as the PL/SQL manual says at ...".

Interactive Report - search does not work when using custom authentication

Apex 3.2.x
I can authenticate fine with my custom authentication and all of my pages work okay except for one page that uses the Interactive Report feature. When I click 'Filter' then enter the column name, operation (contains, =, like, etc.) and the expression, then click the 'Apply' button, the page just re-displays and my filter information is missing?
If I first login to Apex, select and run my application, the Interactive Report features work just fine. What's missing?

More information:
After login into my Apex workspace (development environment), when I display the Interactive Report and click debug I see this debug message:
"using existing session report settings"
When I login using my application's custom authentication and click debug I see this debug message:
"creating session report settings as copy of public saved report"
Based on this, it appears that my session info in not set correctly when using custom authentication... but I'm not sure what needs to be set.
Edited by: user9108091 on Oct 22, 2010 6:44 AM

Filters on CSWP not working when Scheduling Start Date sets Immediate Value

In Sharepoint 2013, When users sets value of "Scheduling start date" to "Immediately", the filters does not work correctly.
I have checked many forums where it is mentioned that If you set scheduling Start date to Immediately, internally the Scheduling Start Date is set to 01/01/1900.
When i use query in content search webpart as publishing date is between "Scheduling Start Date" and "Scheduling End Date" so it fails. it does not displays filtered data.
Please provide some resolution for this issue.
I have tried using calculated field wherein we can put formula to get value for Immediate value and then use it in Filter expression. but I need another approach related to "Scheduling Start Date" Column. i.e can we remove the Immediate radio button
or can we restrict user to use specific date only?
Thanks in Advance.

This is a new one on me.
It's a server program to interface with QuickTime and some other problematic services.
If you use video or 3D in Photoshop Extended, you probably need it.
Sounds like you are correct in that it has to do wtih Quicktime. Do you have PS extended?

Search not working when using mobile data

Similar Messages

Maybe you are looking for