Search of a specific User in Outlook 2010 show different syntax

Hi
when I search for a specific user under sent items in outlook 2010 it shows for e.g. max mustermann in different ways
Max Musterman
'Max Mustermann'
[email protected]
In my personal contact there is no contact like this. Any reason why it show this person in a different look?

Hi Matthew,
login to the outlook web access using the browser and try to search, if you are not able to find it may due to cache in the outlook
Try to remove the Exchange cached mode and perform the action again
Reconfigure your outlook and verify it
Exchange Queries

Similar Messages

Outlook 2010 shows different user on sent on behalf of line

Hi,
I am having an issue where a user has send on behalf permission to a mailbox. This mailbox is also set to forward any mail to another mailbox.
When a user running outlook 2010 sends an email from this mailbox, it goes fine, but when you look at the from field of the sent email it shows as the mailbox it is set to forward to. So [email protected] is set to forward all incoming mail to [email protected],
and user A has permssion to send on behalf of [email protected]
When user A tries to do that, the recieved mail should show in the from field as user A on behalf of [email protected] but instead shows as [email protected] on behalf of [email protected]
I have users running outlook 2003 that have no issue with this. Is there anyway to change what outlook 2010 will display in the from field of the sent email, as we want the recipient to have a named point of contact, but all mail to go into the same mailbox
so if that user is away another can pick it up.
Sorry if it makes little sense...

Hi,
Please make sure
[email protected] doesn’t have any related permissions(Send as permission, send on behalf of rights, full access permission) to User A. We can remove
[email protected] from Forward To filed in EMC then check whether the send on behalf message shows correct in from filed:
1. Open Exchange Management Console, expand Recipient Configuration > Mailbox.
2. Right-click [email protected] > Properties.
3. In Mail Flow Settings tab, click Delivery Options > Properties.
4. Make sure User A is listed in Send on behalf permission list. And uncheck Forward to checkbox.
5. Click OK > Apply > OK.
Then check whether the issue persists. If the issue resolved, then set the forward to back to have a try.
Regards,
Winnie Liang
TechNet Community Support

No Free/Busy Information for Exchange 2010 users in Outlook 2010 client, 2010 OWA shows this information fine

I have looked for hours and hours on Google and this web site for this type of issue and nothing seems to help.
Problem:
On my new Windows 2008 R2 /Exchange 2010 server with IIS7 installed, I can use Outlook 2010 client to login and send and receive e-mail but when I try to busy search internal Exchange users I get no information (cross-hatch), but the sender of the Meeting Request
can see their own free/busy information fine. And OWA users can see free/busy information fine, as can Outlook 2003 client users against this Exchange 2010 server when logged in.
I don't know if I have a certificate problem with regard to IIS7 or Exchange 2010, I did not create my own certificate , it is just what was installed by default when I installed and configured Win2K8 server, IIS7 and Exchange.
On the Windows 7 workstations with Outlook 2010 client, I am not logging into the Exchange 2010 server DNS domain, if that makes any difference. On these workstations I can ping "autodiscover.my.exchange.server.com" and my.exchange.server.com
with no problem. I even used this Microsoft KB to install a new _autodiscover dns entry, but it did not help :
When I turn on logging on my Outlook 2010 client, I see this in my C:\Users\Administrator\AppData\Local\Temp\1\outlook logging\20131208-135658864-fb.log :
2013/12/08 13:56:58.864: Getting ASURL
2013/12/08 13:56:58.864: URL returned from cached autodiscover: blah blah
2013/12/08 13:56:58.864: Request to URL:
2013/12/08 13:56:58.864: Request action:
2013/12/08 13:56:58.864: Request XML: <?xml version="1.0"?>
2013/12/08 13:56:59.051: Request sent
2013/12/08 13:56:59.051: Response error code: 00000000
2013/12/08 13:56:59.051: HTTP status code: 0
2013/12/08 13:56:59.051: -------------------------------
2013/12/08 13:56:59.051: There is an error in request/response.
2013/12/08 13:56:59.051: XML response:
2013/12/08 13:56:59.051: -------------------------------
2013/12/08 13:56:59.051: Getting ASURL
2013/12/08 13:56:59.644: Failed to get ASURL. Error 8004010F
At an Exchange shell console I enter this command and get these results :
Exchnage Management Shell :
VERBOSE: Connecting to BPExchange2010.my.exchange.server.com
VERBOSE: Connected to BPExchange2010.my.exchange.server.com.
[PS] C:\Windows\system32>Test-OutlookWebServices -id:[email protected] -TargetAddress:[email protected]
ll.com
RunspaceId : c929eacd-d53c-49d7-8532-c4b74e61b8be
Id : 1019
Type : Information
Message : A valid Autodiscover service connection point was found. The Autodiscover URL on this object is
Type : Success
Message : [Server] Successfully contacted the UM service at https://bpexchange2010.my.exchange.server.com/ews/exchan
ge.asmx. The elapsed time was 234 milliseconds.
[PS] C:\Windows\system32>
** Also frequently when I log into Outlook 2010 client and start to send a meeting request , I get the Security Alert dialog :
autodiscover.my.exchange.server.com
Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the site's security certificate.
Green Check Mark : The security cerficate is from a trusted certifying authority
Green Check Mark: The security certificate date is valid
Red X : The name on the security certificate is invalid or does not match the name of the site.
Do you want to proceed ? . I either import the certificate or click YES, but does not help this issue.
NOTE: Each user that shows as NO INFORMATION cross-hatch, these users have appointments and have logged into outlook before.
When I do this autodiscover url from a Windows 7 pc with outlook 2010 I get :
This XML file does not appear to have any style information associated with it. The document tree is shown below.
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response>
<Error Time="14:47:01.5656198" Id="401440650">
<ErrorCode>600</ErrorCode>
<Message>Invalid Request</Message>
<DebugData/>
</Error>
</Response>
</Autodiscover>
Can anyone assist ? What am I missing ?
Thank You
NOTE: When will this go away. I had to strip out a lot of helpful information to post this. "Body text cannot contain images or links until we are able to verify your account."

Hi,
How many users encounter this issue, all users with Outlook 2010 or some specific users?
According to your post, the Error code 600 indicates that your Autodiscover service is working well. as for the certificate mismatch issue, we can also following the KB below to resolve it:
http://support.microsoft.com/kb/940726/en-us
The Free/Busy information in Exchange 2010 is using the Availability service to
retrieve it. Please directly access
https://mail.mydomain.ae/EWS/Exchange.asmx in IE and see whether a proper XML file is returned.
Or we can go to
https://testexchangeconnectivity.com and check MS Exchange Web Services Connectivity Tests.
Thanks,
Winnie Liang
TechNet Community Support

Outlook is unable to connect to the proxy server.(Error Code 10) when users opened Outlook 2010

Hi All
Exchange Server - 2013 CU2 (Windows 2012 Standard)
AD Server - 2003 R2 SP2
exchange-svr01.domain.com - internal name
mail.company.net - external name
When users opened Outlook 2010, they will encountered
"There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site exchange-svr01.domain.com.
Outlook is unable to connect to the proxy server.(Error Code 10)"
I also used the Microsoft Remote Connectivity Analyzer to test RPC/HTTP connectivity.
The RPC/HTTP test completed successfully.
    Validating the certificate name.
    Certificate name validation failed.
     Host name company.net doesn't match any name found on the server certificate CN=AMAZONA-U59HG9G.
Testing SSL mutual authentication with the RPC proxy server.
    The test passed with some warnings encountered.
The certificate common name company.net doesn't match the mutual authentication string provided mail.company.net; however, a match was found in the subject alternative name extension.
please help.

Hi PS CL
[PS] C:\Windows\system32>Get-OutlookAnywhere
RunspaceId                         : c457e8aa-a0f3-4a0f-aa02-9eff24d02821
ServerName                         : exchange-svr01
SSLOffloading                      : True
ExternalHostname                   : mail.company.net
InternalHostname                   : exchange-svr01.domain.com
ExternalClientAuthenticationMethod : Negotiate
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}
XropUrl                            :
ExternalClientsRequireSsl          : True
InternalClientsRequireSsl          : True
MetabasePath                       : IIS://exchange-svr01.domain.COM/W3SVC/1/ROOT/Rpc
Path                               : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
ExtendedProtectionTokenChecking    : None
ExtendedProtectionFlags            : {}
ExtendedProtectionSPNList          : {}
AdminDisplayVersion                : Version 15.0 (Build 712.22)
Server                             : exchange-svr01
AdminDisplayName                   :
ExchangeVersion                    : 0.20 (15.0.0.0)
Name                               : Rpc (Default Web Site)
DistinguishedName                  : CN=Rpc (Default Web
                                     Site),CN=HTTP,CN=Protocols,CN=exchange-svr01,CN=Servers,CN=Exchange
Administrative
                                     Group (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=domain,CN=Microsoft
                                     Exchange,CN=Services,CN=Configuration,DC=domain,DC=COM
Identity                           : exchange-svr01\Rpc (Default Web Site)
Guid                               : 33c3cb74-e490-487d-844c-4072334089a1
ObjectCategory                     : domain.COM/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass                        : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
WhenChanged                        : 8/17/2013 10:14:55 AM
WhenCreated                        : 6/25/2013 1:47:50 PM
WhenChangedUTC                     : 8/17/2013 2:14:55 AM
WhenCreatedUTC                     : 6/25/2013 5:47:50 AM
OrganizationId                     :
OriginatingServer                  : ADserver.domain.COM
IsValid                            : True
ObjectState                        : Changed

Outlook 2010 show all users presence not just those you added to Jabber?

A customer has requested that in Outlook 2010 that Presence state is show for all users. Not just those that have been added to their Jabber for Windows 9.7.1 client.
Is there any way to do this?
J4W 9.7.1
IMP 10.0.1SU1

So for all users in consideration; kindly check if the proxy address field in AD is populated with the following format or not;
SIP:uid@sipproxydomainname ... ( this is also the IM address and please note prefixing with the word SIP: is really important).
Note this field will ensure whether you get the presence consistently or not. Refer to the following document for more information;
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/JABW_BK_C4C679C9_00_cisco-jabber-for-windows-97/JABW_BK_C4C679C9_00_cisco-jabber-for-windows-97_chapter_01.html#JABW_TK_E83CC0F0_00
Here is the section that you may want to refer to; "Enable Presence Integration with Microsoft Outlook"
Please rate if you find this helpfull.

Missing attachments for some users in Outlook 2010

Hi,
We have a single Exchange 2010 (sp3 rollups 2 and 4 installed) with clients on Outlook 2010.
4 users received an email from outside the domain with 12 attachments (8 PDF, 4 excel and word). Email content type is multipart/mixed.
One user can see all 12 attachments in outlook while the other 3 can only see the 8 PDF's. All users can see all attachments in OWA. Email size limits and attachment limits dont seem to be the cause.
I've had a look in the forums and I cant see anything related to our exact issue (affecting some but not all users, content type seems ok).
Looks to me like I should start with a pipeline trace, but does anyone have any other suggestions?
Cheers,
Scott

Hi,
To understand more about the issue, I’d like to ask the following questions:
Does the problematic users can view other Excel and Word attachments? Try to send another email with single excel and word attachment to have a test.
Are the problematic attachment visible if you forward the email to other users through Outlook?
Additionally, pipeline tracing log is recommended to troubleshoot the issue and find the root cause.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

After Migration using -ArchiveOnly, On Prem Outlook 2010 showing duplicate of primary as the archive mailbox

We are testing the hybrid migration to Office 365:
Federation and DirSync in place and working -- Exchange 2010 SP3 RU5 -- Outlook 2010 SP2 (14.0.7116.5000)
I have a Primary Mailbox and an Archive Mailbox -- I moved the Archive to Office 365.
I got the familiar "Your Admin has made a change ... You must restart Outlook ..."
Afterwards I get my primary mailbox "Inbox - <email address>" and "Archive <email address>" for the Archive mailbox, but the content is the Primary Mailbox
I have two copies of the Primary mailbox and No archive.
I create a new session to onmicrosoft.com then, "get-mailboxfolderstatisitcs -Identity
'[email protected]' -Archive | ft Identity, ItemsInFolder, FolderSize", I see names, counts, and sizes that are definitely my archive.
No License on Office 365 is checked -- I assumed the migration of the Archive would take care of that.
How do I get my Outlook client to see the Archive and not dup the Primary mailbox in its place?

Hi,
My issue is resolved after disabling of Outlook Anywhere on EX2007 servers.
I have to install new certificate & root certificate into all the clients & issue was resolved.
But my non-domain join clients like WinXp with SP3 with Office 2007/Office 2010 who connects from branches like Banglore, Hyderabad they are getting password prompt pop-up but its working fine for Win7 & Win8 clients.
For password prompt issue i ran this command on EX2010 cas server but still no luck;
Set-OutlookProvider EXPR -CertPrincipalName msstd:*.domain.com
But I found the solution for this;
by adding below 5 registry keys & uncheck of Proxy settings in Outlook settings resolved the password
promt issue.
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\AutoDiscover\ExcludeSCPLookup = 1
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\AutoDiscover\ExcludeHttpRedirect = 1
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\AutoDiscover\ExcludeHttpsAutodiscoverDomain = 1
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\AutoDiscover\ExcludeHttpsRootDomain = 1
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\AutoDiscover\ExcludeSrvRecord = 1
My existing Ex2007 server running in SCC cluster, now I want to break SCC cluster & now I want to decommission one node from SCC Ex2007 mailbox server &
I want to use this node for my Ex2010 mailbox server to create the DAG.
Can any one help me to break SCC & run SCC with one Node only.
NOTE : Here I am short falling for H/W, hence I decided to use one node from SCC & use it as Ex2010 mailbox server to create the DAG.
Now
i just moved 100 mailboxes only
Is it possible to run SCC with only one till I migrate all my users to EX2010.
Any help really appreciated
Regards
Anand S
Thanks & Regards Anand Sunka MCSA+CCNA+MCTS

Not all Conversations in Outlook 2010 Show as Expandable Until Selected

Hi,
I've recently noticed that when using conversation view in Outlook 2010, not all of the conversations show the expandable arrow icon to the left. When the email is highlighted, however, the arrow appears and the conversation can be expanded as usual.
There doesn't appear to be any common factor in whether the arrow is initially shown or not (for example whether or not I was the last person to respond in the conversation, the other person or people in the conversation etc.).
I've observed this in other people's Outlook as well, so am wondering if anyone knows if there is a setting that I'm missing or if this is somehow 'by design'?
Thanks,
Chris

Hi,
We haven't seen such issues here with conversation view. However I still would suggest you to try out the following:
1. Get Outlook, Word and MSO on the latest updates. Please refer the link below to check for the latest updates.
How to install the latest applicable updates for Microsoft Outlook (US English only) :
https://support.microsoft.com/kb/2625547
2. Check the issue in safe mode
3. If the issue is still seen then disable all the add-ins and check the behavior again
4. If the issue is still seen then please create new outlook profile and check the behavior
5. If we still see the issue , then please uninstall office and reinstall back and check the behavior
6. If we still see the issue then create new windows profile and check the behavior
Once you have exhausted the steps and issue is still seen, then I would appreciate if you can open phone support case with Microsoft so that we can collect logs and analyze the same and help you out to resolve the concern.
Hope this helps
Thanks

Re-sent Sent Email In Outlook 2010 Showing as Being Sent to the Previous Recipient

When re-sending a previously sent item from within Outlook 2010, after a few seconds, the newly re-sent email is showing as being sent to the last recipient who the email is sent to. For example;
I send an email to [email protected] I then want to send the email to [email protected].. so I click Sent Items, double click the email I have just sent, on the Message tab in the Move group, I click Actions and then click Resend This Message.
I remove the original recipient and add the new recipient and click Send.
I check my sent items a few seconds later and the newly sent email ([email protected]) is showing as being sent to [email protected] However, the re-sent email has actually be sent to the correct recipient.
I would appreciate any advice on this.

Hi,
I assume this issue is related to the corrupted nickname cache. Does this issue occur with certain recipients? If so, I suggest you remove the nickname cache entries of these recipients:
Open a new email message.
Type the first few characters of the nickname cache entry that you want to remove from the cache.
When the entry appears in the list of suggested names, move your mouse pointer over the name until it becomes highlighted, but do not click the name.
When the “X” icon appears next to the highlighted name, click X to remove the name from the list.
If this happens to all recipients, we can consider to reset the whole Outlook nickname cache for Outlook 2010:
Open Outlook 2010.
On the File tab, click Options.
Click the Mail tab.
Under Send Messages, click Empty Auto-Complete List.
Click Yes.
I hope the information is helpful to you.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

User using outlook 2010 unable to search older items lets say a year old.

User is unable to search an emails a year old in outlook. OWA is working fine able to search and find all the emails .
Tried rebuilding the outlook profile and indexing but still unable to find any pointers.
Thanks

Already tried rebuilding index and profile... Do you think the below will work any idea ? i checked the below entry is not listed under below location so if i will create that and set it to 0 will that work ?
1)       Press the Windows Key + R on your keyboard, and type “REGEDIT”. This will open the Windows Registry Editor.
2)       Browse to the following: "HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Windows Search"
3)       You will manually have to reset the value of “Prevent Indexing Outlook” to “0” (without the quotes). To do this, right click on the “Prevent Indexing Outlook” key,
select “Modify…”, then change the value data to “0”.
4) Close the registry editor.

Is it possible to add a button to the right-click context menu for a user in Outlook 2010 using VBA?

I've tried many things and read up quite a bit but I cannot figure this out.
I cannot create an add-in so I have to use VBA.
I want to add a a button to the right-click context menu when I right-click on a user. Is this possible?

Hello,
Yes, it is possible to customize the context menu in Outlook. See
Customizing Context Menus in Office 2010 for more information.
But VBA doesn't allow to customize the Fluent UI in Outlook, you need to develop an add-in instead.

Search using a specific user without providing password

Hi Experts,
I'm trying to impersonate a search in FAST or atleast in Sharepoint search without providing the password. Below is a similar thread.
http://social.technet.microsoft.com/Forums/en/sharepointsearchlegacy/thread/49475fbc-3c6d-42f2-bf35-82365bf0a0c8
Any help?
Much Thanks!!
Freddie Maize ..A story with Glory is History. Doesn’t matter whether Glory rest in the world of Demon or God. Lets create History..

Hi Freddie,
Here is another similar post about performing an impersonated search in SharePoint without providing a password, please check the details from below,
http://stackoverflow.com/questions/1025409/can-you-perform-an-impersonated-search-in-sharepoint-without-providing-a-passwor
http://www.threewill.com/2010/06/connect-to-sharepoint-forwarding-user-identities/
Thanks
Daniel Yang
TechNet Community Support

How to delete existing e-mail signature for all users in outlook 2010

Dears,
How to delete existing (or reset to none ) e-mail signature for all users .
If anyone knows where I can find this script or another way of accomplishing this I would be very thankful.
outlook Version : 2010
PS : Not to disable.
Khaja Hameed

If you want to manage signatures for multiple users your best bet is to use Group Policy.
See:
Setting up a Corporate Signature | HowTo-Outlook
http://www.howto-outlook.com/howto/corporatesignatures.htm
<p>Eric Legault (<a href="https:/mvp.support.microsoft.com/default.aspx/profile/legault">MVP: Outlook</a>)<br/> <a href="http://about.me/ericmlegault">About me...</a><br/> <a href="http://www.outlookappins.com/products/social-contacts">Outlook
Appins</a>: Store Social Media fields in your Outlook Contacts!</p>

Set "Maximum number of recipients" option for specific users in Exchange 2010

I have some set of users who usually send bulk emails outside. I need to increase the value for these users for"Maximum number of recipients" as 999.
Any help or suggestion is appreciated.
Thanks,
RIWAA
RIWA

Hi Riwa ,
Really sorry for providing the wrong value on MaxRecipientEnvelopeLimit in my previous post.
The default value for MaxRecipientEnvelopeLimit is 5000
Reference Link : http://technet.microsoft.com/en-us/library/bb124151%28v=exchg.150%29.aspx
MaxRecipientEnvelopeLimit
Optional
Microsoft.Exchange.Data.Unlimited
This parameter is available only in on-premises Exchange 2013.
The MaxRecipientEnvelopeLimit parameter specifies the maximum number of recipients in a message. The default value is 5000. The valid input range for this parameter is from 0 through 2147483647.
If you enter a value ofUnlimited, no limit is imposed on the number of recipients in a message. Exchange treats an unexpanded distribution group as one recipient.
ANDY thanks a lot for intimating and making me to have a clear understanding on this case.
Thanks & Regards S.Nithyanandham

Lync 2013 Client crashes when searching for a specific user

We are using Lync client version 15.0.4569.1503
When typing "Singh" into the search field, Lync crashes with the error message:
Microsoft Lync has stopped working. Windows is checking for a solution to the problem.
This is happening for all users in the enterprise who search for Singh.
In Event Viewer, Application Error 1000 is logged:
Faulting application name: lync.exe, version: 15.0.4569.1503, time stamp: 0x52b0af33Faulting module name: Uc.dll, version: 15.0.4569.1503, time stamp: 0x52b0b5c4Exception code: 0xc0000005Fault offset: 0x00007c3aFaulting process id: 0x3dcFaulting application start time: 0x01cfa5ae6c1d6266Faulting application path: C:\Program Files (x86)\Microsoft Office\Office15\lync.exeFaulting module path: C:\Program Files (x86)\Microsoft Office\Office15\Uc.dllReport Id: aba6fa46-11a1-11e4-9f53-18037341ac8d
The WER file contains the following:
Version=1
EventType=APPCRASH
EventTime=130505075954941334
ReportType=2
Consent=1
UploadTime=130505075956121334
ReportIdentifier=135567f7-11a0-11e4-9f53-18037341ac8d
IntegratorReportIdentifier=135567f6-11a0-11e4-9f53-18037341ac8d
WOW64=1
Response.BucketId=106444627
Response.BucketTable=17
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=lync.exe
Sig[1].Name=Application Version
Sig[1].Value=15.0.4569.1503
Sig[2].Name=Application Timestamp
Sig[2].Value=52b0af33
Sig[3].Name=Fault Module Name
Sig[3].Value=Uc.dll
Sig[4].Name=Fault Module Version
Sig[4].Value=15.0.4569.1503
Sig[5].Name=Fault Module Timestamp
Sig[5].Value=52b0b5c4
Sig[6].Name=Exception Code
Sig[6].Value=c0000005
Sig[7].Name=Exception Offset
Sig[7].Value=00007c3a
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.256.4
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=2057
UI[2]=C:\Program Files (x86)\Microsoft Office\Office15\lync.exe
UI[3]=Microsoft Lync has stopped working
UI[4]=Windows can check online for a solution to the problem and try to restart the program.
UI[5]=Check online for a solution and restart the program
UI[6]=Check online for a solution later and close the program
UI[7]=Close the program
LoadedModule[0]=C:\Program Files (x86)\Microsoft Office\Office15\lync.exe
LoadedModule[1]=C:\windows\SysWOW64\ntdll.dll
LoadedModule[2]=C:\windows\syswow64\kernel32.dll
LoadedModule[3]=C:\windows\syswow64\KERNELBASE.dll
LoadedModule[4]=C:\windows\syswow64\ADVAPI32.dll
LoadedModule[5]=C:\windows\syswow64\msvcrt.dll
LoadedModule[6]=C:\windows\SysWOW64\sechost.dll
LoadedModule[7]=C:\windows\syswow64\RPCRT4.dll
LoadedModule[8]=C:\windows\syswow64\SspiCli.dll
LoadedModule[9]=C:\windows\syswow64\CRYPTBASE.dll
LoadedModule[10]=C:\windows\syswow64\ole32.dll
LoadedModule[11]=C:\windows\syswow64\GDI32.dll
LoadedModule[12]=C:\windows\syswow64\USER32.dll
LoadedModule[13]=C:\windows\syswow64\LPK.dll
LoadedModule[14]=C:\windows\syswow64\USP10.dll
LoadedModule[15]=C:\windows\syswow64\OLEAUT32.dll
LoadedModule[16]=C:\windows\system32\MSVCR100.dll
LoadedModule[17]=C:\Program Files (x86)\Microsoft Office\Office15\LyncModelProxy.dll
LoadedModule[18]=C:\Program Files (x86)\Microsoft Office\Office15\PropertyModel.dll
LoadedModule[19]=C:\windows\system32\MSVCP100.dll
LoadedModule[20]=C:\Program Files (x86)\Microsoft Office\Office15\PropertyModelProxy.dll
LoadedModule[21]=C:\Program Files (x86)\Microsoft Office\Office15\LyncDesktopViewModel.dll
LoadedModule[22]=C:\windows\system32\MSIMG32.dll
LoadedModule[23]=C:\windows\WinSxS\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.7601.18455_none_72d576ad8665e853\gdiplus.dll
LoadedModule[24]=C:\windows\system32\DWrite.dll
LoadedModule[25]=C:\Program Files (x86)\Microsoft Office\Office15\RtmMvrAs.dll
LoadedModule[26]=C:\windows\system32\MSVCR110.dll
LoadedModule[27]=C:\Program Files (x86)\Microsoft Office\Office15\RtmPal.dll
LoadedModule[28]=C:\windows\system32\WINMM.dll
LoadedModule[29]=C:\windows\syswow64\WS2_32.dll
LoadedModule[30]=C:\windows\syswow64\NSI.dll
LoadedModule[31]=C:\windows\syswow64\PSAPI.DLL
LoadedModule[32]=C:\windows\system32\POWRPROF.dll
LoadedModule[33]=C:\windows\syswow64\SETUPAPI.dll
LoadedModule[34]=C:\windows\syswow64\CFGMGR32.dll
LoadedModule[35]=C:\windows\syswow64\DEVOBJ.dll
LoadedModule[36]=C:\windows\system32\pdh.dll
LoadedModule[37]=C:\windows\system32\MSVCP110.dll
LoadedModule[38]=C:\windows\system32\IPHLPAPI.DLL
LoadedModule[39]=C:\windows\system32\WINNSI.DLL
LoadedModule[40]=C:\Program Files (x86)\Microsoft Office\Office15\dbghelp.dll
LoadedModule[41]=C:\windows\system32\bcrypt.dll
LoadedModule[42]=C:\windows\system32\WTSAPI32.dll
LoadedModule[43]=C:\windows\system32\PROPSYS.dll
LoadedModule[44]=C:\Program Files (x86)\Microsoft Office\Office15\RtmCodecs.dll
LoadedModule[45]=C:\windows\system32\d3d11.dll
LoadedModule[46]=C:\windows\system32\dxgi.dll
LoadedModule[47]=C:\windows\system32\VERSION.dll
LoadedModule[48]=C:\windows\system32\dwmapi.dll
LoadedModule[49]=C:\windows\system32\d3d9.dll
LoadedModule[50]=C:\windows\system32\d3d8thk.dll
LoadedModule[51]=C:\windows\system32\dxva2.dll
LoadedModule[52]=C:\windows\syswow64\IMM32.dll
LoadedModule[53]=C:\windows\syswow64\MSCTF.dll
LoadedModule[54]=C:\windows\system32\UIAutomationCore.DLL
LoadedModule[55]=C:\windows\system32\OLEACC.dll
LoadedModule[56]=C:\Program Files (x86)\Common Files\Microsoft Shared\Office15\mso.dll
LoadedModule[57]=C:\windows\system32\d2d1.dll
LoadedModule[58]=C:\windows\system32\uxtheme.dll
LoadedModule[59]=C:\windows\system32\WINSTA.dll
LoadedModule[60]=C:\windows\syswow64\WINTRUST.dll
LoadedModule[61]=C:\windows\syswow64\CRYPT32.dll
LoadedModule[62]=C:\windows\syswow64\MSASN1.dll
LoadedModule[63]=C:\windows\syswow64\SHELL32.dll
LoadedModule[64]=C:\windows\syswow64\SHLWAPI.dll
LoadedModule[65]=C:\Program Files (x86)\Microsoft Office\Office15\Uc.dll
LoadedModule[66]=C:\Program Files (x86)\Microsoft Office\Office15\RtmMvrCs.dll
LoadedModule[67]=C:\windows\system32\WINSPOOL.DRV
LoadedModule[68]=C:\windows\system32\HID.DLL
LoadedModule[69]=C:\windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2\Comctl32.dll
LoadedModule[70]=C:\windows\syswow64\CLBCatQ.DLL
LoadedModule[71]=C:\windows\system32\msi.dll
LoadedModule[72]=C:\Program Files (x86)\Microsoft Office\Office15\1033\lyncDesktopResources.dll
LoadedModule[73]=C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE15\adal.dll
LoadedModule[74]=C:\windows\system32\WINHTTP.dll
LoadedModule[75]=C:\windows\system32\webio.dll
LoadedModule[76]=C:\windows\syswow64\WININET.dll
LoadedModule[77]=C:\windows\syswow64\Normaliz.dll
LoadedModule[78]=C:\windows\syswow64\iertutil.dll
LoadedModule[79]=C:\windows\syswow64\urlmon.dll
LoadedModule[80]=C:\windows\system32\Secur32.dll
LoadedModule[81]=C:\windows\system32\DavClnt.DLL
LoadedModule[82]=C:\windows\system32\DAVHLPR.dll
LoadedModule[83]=C:\windows\System32\netprofm.dll
LoadedModule[84]=C:\windows\System32\nlaapi.dll
LoadedModule[85]=C:\windows\system32\CRYPTSP.dll
LoadedModule[86]=C:\windows\system32\rsaenh.dll
LoadedModule[87]=C:\windows\system32\RpcRtRemote.dll
LoadedModule[88]=C:\windows\System32\npmproxy.dll
LoadedModule[89]=C:\windows\system32\webservices.dll
LoadedModule[90]=C:\windows\system32\d3d10_1.dll
LoadedModule[91]=C:\windows\system32\d3d10_1core.dll
LoadedModule[92]=C:\windows\system32\D3D10Warp.dll
LoadedModule[93]=C:\windows\system32\dhcpcsvc6.DLL
LoadedModule[94]=C:\windows\system32\dhcpcsvc.DLL
LoadedModule[95]=C:\windows\system32\credssp.dll
LoadedModule[96]=C:\windows\system32\mswsock.dll
LoadedModule[97]=C:\windows\System32\wshtcpip.dll
LoadedModule[98]=C:\windows\System32\wship6.dll
LoadedModule[99]=C:\windows\system32\DNSAPI.dll
LoadedModule[100]=C:\windows\system32\rasadhlp.dll
LoadedModule[101]=C:\windows\System32\fwpuclnt.dll
LoadedModule[102]=C:\windows\SysWOW64\msv1_0.DLL
LoadedModule[103]=C:\windows\system32\cryptdll.dll
LoadedModule[104]=C:\windows\SysWOW64\schannel.dll
LoadedModule[105]=C:\windows\system32\ncrypt.dll
LoadedModule[106]=C:\windows\SysWOW64\bcryptprimitives.dll
LoadedModule[107]=C:\windows\system32\USERENV.dll
LoadedModule[108]=C:\windows\system32\profapi.dll
LoadedModule[109]=C:\windows\system32\GPAPI.dll
LoadedModule[110]=C:\Program Files (x86)\Common Files\Microsoft Shared\OfficeSoftwareProtectionPlatform\osppc.dll
LoadedModule[111]=C:\windows\system32\ntmarta.dll
LoadedModule[112]=C:\windows\syswow64\WLDAP32.dll
LoadedModule[113]=C:\Program Files (x86)\Microsoft Office\Office15\UccApi.dll
LoadedModule[114]=C:\Program Files (x86)\Microsoft Office\Office15\Win32MsgQueue.dll
LoadedModule[115]=C:\windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.18201_none_ec80f00e8593ece5\Comctl32.dll
LoadedModule[116]=C:\Program Files (x86)\Microsoft Office\Office15\1033\ocapires.dll
LoadedModule[117]=C:\Program Files (x86)\Microsoft Office\Office15\Psom.dll
LoadedModule[118]=C:\windows\System32\msxml6.dll
LoadedModule[119]=C:\Program Files (x86)\Microsoft Office\Office15\OcImport.DLL
LoadedModule[120]=C:\Program Files (x86)\Microsoft Office\Office15\ocrec.dll
LoadedModule[121]=C:\windows\system32\mlang.dll
LoadedModule[122]=C:\windows\system32\windowscodecs.dll
LoadedModule[123]=C:\Program Files (x86)\Microsoft Office\Office15\RtmMediaManager.dll
LoadedModule[124]=C:\windows\system32\AVRT.DLL
LoadedModule[125]=C:\Program Files (x86)\Microsoft Office\Office15\AppSharingMediaProvider.dll
LoadedModule[126]=C:\Program Files (x86)\Microsoft Office\Office15\RTMPLTFM.dll
LoadedModule[127]=C:\windows\system32\wlanapi.dll
LoadedModule[128]=C:\windows\system32\wlanutil.dll
LoadedModule[129]=C:\windows\System32\MMDevApi.dll
LoadedModule[130]=C:\windows\system32\MFPlat.dll
LoadedModule[131]=C:\Windows\SysWOW64\devenum.dll
LoadedModule[132]=C:\windows\system32\msdmo.dll
LoadedModule[133]=C:\Program Files (x86)\Common Files\Intel\Media SDK\i2\3.0\mfx_mft_h264ve_32.dll
LoadedModule[134]=C:\windows\system32\EVR.dll
LoadedModule[135]=C:\windows\system32\MF.dll
LoadedModule[136]=C:\windows\system32\ATL.DLL
LoadedModule[137]=C:\windows\system32\ksuser.dll
LoadedModule[138]=C:\windows\system32\WinSATAPI.dll
LoadedModule[139]=C:\windows\system32\AUDIOSES.DLL
LoadedModule[140]=C:\Program Files (x86)\Microsoft Office\Office15\RdpQoEMetrics.dll
LoadedModule[141]=C:\windows\system32\XmlLite.dll
LoadedModule[142]=C:\windows\SysWOW64\SFC.DLL
LoadedModule[143]=C:\windows\system32\sfc_os.DLL
LoadedModule[144]=C:\windows\SysWOW64\SXS.DLL
LoadedModule[145]=C:\Program Files (x86)\Microsoft Office\Office15\sqmapi.dll
LoadedModule[146]=C:\Program Files (x86)\Microsoft Office\Office15\lynchtmlconvpxy.dll
LoadedModule[147]=C:\windows\system32\explorerframe.dll
LoadedModule[148]=C:\windows\system32\DUser.dll
LoadedModule[149]=C:\windows\system32\DUI70.dll
LoadedModule[150]=C:\Program Files (x86)\Common Files\Microsoft Shared\Office15\riched20.dll
LoadedModule[151]=C:\windows\system32\RASAPI32.dll
LoadedModule[152]=C:\windows\system32\rasman.dll
LoadedModule[153]=C:\windows\system32\rtutils.dll
LoadedModule[154]=C:\windows\system32\sensapi.dll
LoadedModule[155]=C:\windows\system32\apphelp.dll
LoadedModule[156]=C:\windows\system32\cryptnet.dll
LoadedModule[157]=C:\windows\SysWOW64\Kerberos.DLL
LoadedModule[158]=C:\windows\system32\LOGONCLI.DLL
LoadedModule[159]=C:\windows\system32\DSROLE.DLL
LoadedModule[160]=C:\windows\system32\NETUTILS.DLL
LoadedModule[161]=C:\windows\system32\NTDSAPI.DLL
LoadedModule[162]=C:\windows\system32\inetcomm.dll
LoadedModule[163]=C:\windows\system32\MSOERT2.dll
LoadedModule[164]=C:\windows\system32\inetres.dll
LoadedModule[165]=C:\windows\system32\igd10umd32.dll
LoadedModule[166]=C:\Users\b6600\AppData\Local\LogMeIn Rescue Applet\LMIR0001.tmp\rahook.dll
LoadedModule[167]=C:\windows\system32\wsock32.dll
LoadedModule[168]=C:\windows\system32\netapi32.dll
LoadedModule[169]=C:\windows\system32\srvcli.dll
LoadedModule[170]=C:\windows\system32\wkscli.dll
LoadedModule[171]=C:\windows\system32\BROWCLI.DLL
LoadedModule[172]=C:\windows\system32\DFSCLI.DLL
LoadedModule[173]=C:\windows\system32\SAMCLI.DLL
LoadedModule[174]=C:\windows\system32\SCHEDCLI.DLL
LoadedModule[175]=C:\windows\system32\snmpapi.dll
LoadedModule[176]=C:\windows\system32\inetmib1.dll
LoadedModule[177]=C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE15\MSPTLS.DLL
Sec[0].Key=LCID
Sec[0].Value=1033
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped working
ConsentKey=APPCRASH
AppName=Microsoft Lync
AppPath=C:\Program Files (x86)\Microsoft Office\Office15\lync.exe
Thanks in advance,

If you update your client to the most recent version, does the issue reoccur?
How many Singh's do you have at your company? I'm curious if there's an active directory attribute that is returned with that user that the client really just doesn't like. Can you go into Active Directory Users and Computers, select View->Advanced
then manually find Singh (don't search) and go to the Attribute Editor tab. Do you see any attribute in there (not just Lync attributes) that seems to have any odd or escape characters?
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Search of a specific User in Outlook 2010 show different syntax

Similar Messages

Maybe you are looking for