Search of Blog Stopped Working

About a week before the announcement of iLife '08, I noticed that my RSS searching stopped working. Apparently others have had this same experience. I know that this is a server-side feature, so I presume the problem is related to the server. I've tried deleting my entire site, uploading it again, removing RSS and Search, adding them again, and yet nothing seems to work.
At one point, removing the Search and/or RSS buttons made it impossible to save or publish my site. After upgrading to iWeb 2.0.1, I was able to remove them and add them again (hoping this would recreate whatever server-side files were possibly corrupted). However, it still doesn't work.
Does anyone have any insights or suggestions?

Just checking in... It's been a few days since I posted this question and nobody seems to know anything about it.

Similar Messages

  • Search widget/app stopped working

    Nokia 700 / belle 111.030.0609
    Search widget/app stopped working.
    It just crushes now.
    Worked fine before software upgrade.
    reinstalling software doesn't help.
    Solved!
    Go to Solution.

    Hey Alexander_S
    How are you doing today?
    Remove the application,  connect the device to Nokia suite, go to 'my stuff' where you'll find all your previously installed applications.
    Select the one you want and install.
    Please let us know if you require further assistance.
    Regards.
    Carl
    If this post answers your question, you can help others by clicking the green accepted solution' button.
    Please ask your questions to the main board and not to my mailbox. Thank you.

  • Adobe Bridge Search Tool Just Stopped Working

    i recently upgraded to CS6 and all was well for a couple weeks then all of the sudden the search tool in bridge just flat out stopped working. i always used it to search for keywords and it worked almost flawlessly until today. i have thousands of photos on multiple hard drives and ive even tried indexing them to no avail. nothing works. ive used both the search bar in the top right corner as well as the find window and still nada. i purged the cache, i rebuilt the cache and did everything else i could think of still to no avail. ive googled and googled and googled and found absolutely no help in resolving this issue. i reset bridge during startup also to no avail. i even indexed specific files in specific folders and pointed the search directly to those folders and still nothing. i dont know what else to try at this point. can anyone offer any suggestions before i give up and just re-install the product (which i REALLY dont wanna do)?
    im running CS6 on Windows 7 64-bit .. and again, it worked fine until today. i havent changed any settings or modified anything that i can think of that would have thrown bridge out of whack.

    Weird. Have you tried resetting Bridge (Ctrl/Cmd-click icon)?
    Maybe the cache is damaged or unwriteable?
    I assume that the index is created in the Cache 'data' folder, and that this is the root of your problem.  As an experiment, you could create a new folder in a known good writeable location on an internal drive, and change the cache location in Bridge Preferences (making a note of the existing location first). When you restart Bridge, it will use the new location, and automatically create a new index and preview cache.
    Then try a search in one folder, for a known used keyword, making sure you have indexing turned on in the search options. Let us know how you get on.

  • Search in Mail stopped working

    Suddenly, search in Mail has stopped working. I can type in a simple word like "we" (without the quotes, of course) and nothing appears in the list. It doesn't matter if I choose a specific mailbox or "All Mailboxes," or "From" "To" "Subject" or "Entire Message," nothing appears.
    I just now selected a word from the body of one of my incoming messages, "choosing," and pasted it into the search box. When I click on "Subject" it finds two messages, "Congratulations on choosing to gain..." and "Choosing the right opportunity for you" but it finds nothing when I click on "Entire Message!"
    Something is obviously messed up here.

    I was able to solve all my problems with searching in Mail with a simple process. I backed up my entire machine with Time Machine, then booted from my OS X install / restore DVD. Then selected restore from time machine backup, it rewrote my entire hard drive with the backup from time machine and upon booting back up, Mail reindexed all messages and my computer was exactly how I left it before I backed it up.
    The problems I was having with mail included:
    Unable to search 'entire message'
    Unable to search 'entire message' when a specific inbox was selected
    Able to search messages from spotlight in the Finder, but then they would disappear.
    The spotlight index not being updated when new mail came in, making it unsearchable.
    Plus a slew of other search in Mail problems.
    Backing up and then doing a full restore from Time Machine solved all the problems.
    Hope this helps,
    Vince

  • Running Lion, mail search function suddenly stopped working

    All of a sudden the search function in my Mac mail stopped working.  No emails show up when I begin to search in any of me mailboxes.  Still able to search in spotlight but not always effective in finding what I'm looking for.  Desperately need to fix this as always referring to old emails for work.

    You can rebuild your mail search indexes by following these instructions:
    http://docs.info.apple.com/article.html?path=Mail/3.0/en/14019.html
    Cheers,
    Rodney

  • Dropdowns on google search results page stopped working. why?

    i did not install anything. but my dropdowns and expand (+ button) on google search results page just stopped working.
    http://img.skitch.com/20090923-dg6mg9heppis5y9iynaetdsdws.jpg
    on this above image -
    - i cannot expans "show options?
    - i cannot see settings dropdown in the top right hand corner
    all this works in firefox. stopped working in safari.
    i have safari 4.0.3 installed.
    10.6.1 OS.
    anybody else have this problem?
    found a solution?

    strangely enough, dropdowns on maps search page works.
    i am totally lost as to why this could be happening.
    i have glims-beta for safari 64bit installed. could it be due to glims?

  • My mail search function has stopped working

    A couple of days ago for no 'apparent' reason my mail search function stopped working.
    I have 2 IMAP accounts that run through gmail - neither they nor the 'on my mac' accounts are working as they normally do. It's very strange as some things come up on my search, but most things do not.
    This happens whether I select 'search all' or pick a particular folder to search in - I can see the email is there, but the search function doesn't pick it up when I test it out.
    I'm on Mac OS x, V 10.6.8 in case that's relevant.
    Any suggestions would be fabulous - thanks!
    Sarah

    Mail search uses Spotlight to some extent.
    Try re-indexing Spotlight.
    Spotlight – Re-index

  • Search keyboard shortcut stop working

    Dear everyall,
    The "Cmd-Opt-F" shortcut to lové the cocus to the search box stop working (MacOsX and iTunes were uptodate)
    Is there any tip to restore this fonction ?
    Manu thanks,
    Abeebytheway from Belgium

    Sorry no one ever answered.  (Over a year and a half....)  But I had this same question and this post is one of the first results on apple, so here's what I found:
    http://forums.macrumors.com/showthread.php?t=812847
    The solution mentioned there does seem to work fine (for getting Command-F, not Option-Command-F).

  • Search tab has stopped working in .CHMs

    I maintain several .CHMs for a client. For a reason I can't
    figure out, the Search tab of any .CHM that I've updated recently
    no longer works. Any search attempt results in "No topics found." I
    verified that any older versions of .CHMs have working Search tabs,
    but any .CHM that I've updated this year no longer has a working
    Search tab. I even took one of last year's projects, made
    absolutely no changes, recompiled, and voila, Search is broken.
    I have verified that I've got all settings set correctly on
    the Windows Properties dialog, plus all required .DLLs are
    correctly installed and registered.
    The only change to my setup is that I upgraded to IE7.0
    (finally!) earlier this year. And I've kept up with all Windows
    updates. I have been using and continue to use RoboHelp HTML
    X5.0.2. (I have not upgraded because, in my opinion, it was not
    worth my $500. I'm self-employed and am holding out for a more
    robust upgrade.)
    Any ideas? Frankly, I assume that a Microsoft upgrade has
    messed up the works and I'm stuck, unless I shell out bucks....
    Nita Beck

    Thanks very much for the reply, Author Care! As I said, even
    for a project whose Search tab had been working and for which I
    made absolutely no changes, recompiling that project now yields a
    broken Search tab... Wassup with that??!!!
    Including only an Index is not practical for the particular
    Help system I'm working on today. It's loaded with esoteric terms
    and strings of numbers (thousands and thousands) that users must be
    able to (and, up until now, have been able to) search for, and it's
    quite useful that found search terms are highlighted in the found
    topics. There's no way that the Index in this case can replace the
    functionality offered by Search. They are complementary
    features.

  • Why has my search on itunes stopped working

    has anyone experienced their search facility not working properly since recently updating itunes to 11.1

    I found this too and luckily fouind this thread:
    https://discussions.apple.com/thread/4586074?start=0&tstart=0
    In short: Click the search magnifying glass and untick 'Search Entire Library'.
    Worked for me and also restored the search to be more like previous versions, before they made the search less useful.

  • Spotlight / search entire message stopped working!?

    Hi, whenever I type anything into the search bar, and I have 'entire message' selected, it ALWAYS returns 0 results.
    Even when it blatantly should.
    Any ideas folks?
    thanks in advance
    Gwyn
    xxxxxxxx

    Telling Spotlight to re-index the disk might have solved your problem:
    Re: Search Entire Message Not Working After Fresh OS Install
    Deleting anything shouldn't have to be necessary. If it "fixed" your problem it could be just because that caused Spotlight to update the index accordingly.
    What is weird about the other thread Ernie was referring to is that Mail couldn't find messages that Spotlight could, which I still don't know whether was also your case or not. I troubleshooted a similar case a few weeks ago, which I believe was caused by permissions issues. Unfortunately, the OP didn't provide feedback as to whether what I suggested there fixed anything or not:
    Spotlight non-functional

  • [SOLVED] Yaourt search on AUR stopped working

    hi all :>
    yaourt's search engine was working quite nice until i booted up my computer this morning -.-
    does anyone have an idea to solve this problem!? downloading + building from aur works great with yaourt just the search thingy is kinda broken -.-
    can it be possible that it has to do something with my changes in sysctl.conf? i added several rules:
    # Disable packet forwarding
    net.ipv4.ip_forward=0
    # Disable the magic-sysrq key
    kernel.sysrq = 0
    # Enable TCP SYN Cookie Protection
    net.ipv4.tcp_syncookies = 1
    # Source Address verification
    net.ipv4.conf.all.rp_filter = 1
    # Block Ping
    net.ipv4.icmp_echo_ignore_all = 1
    net.ipv4.tcp_timestamps = 0
    net.ipv4.conf.all.accept_source_route=0
    net.ipv4.icmp_echo_ignore_broadcasts=1
    net.ipv4.icmp_ignore_bogus_error_responses=1
    best regards :>
    Last edited by arch0r (2008-12-29 19:37:54)

    I've come up with a workaround. It's quick and probably dirty, but it enables me to search the packages and view the descriptions.
    --- yaourt.orig    2008-12-26 13:12:42.000000000 +0100
    +++ /usr/bin/yaourt    2008-12-26 13:23:45.000000000 +0100
    @@ -1253,9 +1253,9 @@
        _pkg=`echo $1 | sed 's/ AND / /'`
        title $(eval_gettext 'searching for $_pkg on AUR')
        [ "$MAJOR" = "interactivesearch" ] && i=$(($(wc -l $searchfile | awk '{print $1}')+1))
    -    wget -q "${AUR_URL}${1}" -O - | grep -A 2 "<a href='/packages.php?ID=" \
    +    wget -q "${AUR_URL}${1}" -O - | grep -A 3 "<a href='packages.php?ID=" \
        | sed -e "s/<\/span>.*$//" -e "s/^.*packages.php?ID=.*span class.*'>/aur\//" -e "s/^.*span class.*'>//" \
    -    | grep -v " " | grep -v "^--" |
    +    | grep -v " " | grep -v "^--" | grep -v "^$" |
        while read line; do
            if [ "${line%\/*}" = "aur" ]; then
                package=$(echo $line | awk '{ print $1}' | sed 's/^.*\///')

  • Search on app stopped working

    The search function is no longer working on my ipad. Desperately need it for my uni work.

    thebestsarh,
    I suspect that your PDF document is a scanned PDF.  Because a scanned PDF document contains images of text (not actual text), Reader is not able to find the words that you are looking for.
    To check whether your PDF document is a scanned PDF, you can long press (press & hold) over text.
    If you can select a word and the context menu pops up (as shown below), the PDF document contains actual text.  You should be able to search words in the PDF document.
    If you cannot select a word (or some portion of text), you have a scanned PDF containing images of text.
    You can also try other PDF documents to check if the search function in Adobe Reader is working properly.
    Hope this helps to identify your problem.

  • Searching by "Contents" stopped working

    I'm using OSX.4.11 Something's gone haywire when I use Control F and bring up the Search window. If I try to search by "Contents" -- let's say search to find any document that uses a particular word -- I always get the answer "0 items," even if there are hundreds of items with the content word I'm searching for. Anyone have any ideas on how I can get this function working again?

    I get that problem too.
    I think the Find function in OSX is a joke. It's broken.
    I just copied and pasted a folder name that's on one of our Mac Server, pasted it in the Find dialog box and it couldn't find it.
    What a joke!!!

  • Mail - search function has stopped working

    I have always been able to search Mail.app (v 3.2) messages by using the (top right) Search box. But if I type any search string in that box now, no messages are found. But Spotlight searches are still finding hits.
    Is there a way to get Mail.app to "rebuild" it's search database? Is there a plist file (or similar) that could have become corrupted / non-functioning?
    Any suggestions as to how I can solve this issue gratefully received.
    Julian

    You can rebuild your mail search indexes by following these instructions:
    http://docs.info.apple.com/article.html?path=Mail/3.0/en/14019.html
    Cheers,
    Rodney

Maybe you are looking for