Search or Report on the CVE ID using SCUP 2011 and SCCM 2012.

I am in the process of deploying SCCM 2012 on a single server since we have a small environment, as a Primary Site Server. The SQL databases are located on a separate SQL 2008 cluster. I also have SCUP 2011 installed on the SCCM 2012 server.
I am starting to use SCUP as the facilitator to publish 3rd party patches into SCCM and I would like to be able to report on the CVE number that an update has. I know that not all updates have a CVE and that microsoft updates usually publish this in
the MSID article.
My question is if there is anyway to report on this CVE code from within System Center Configuration Manager? If the data is in the xml file in SCUP and I can read it there, does that information get discarded when published to SCCM or does it remain
with the update but hidden in the SQL DB? If it is hidden, I'm sure we can report on it but I would like to know if anyone else is pursuing this or had any other ideas for reporting on the CVE or searching for the CVE in SCCM 2012?
Thanks in advance.
Jason Apt, Microsoft Certified Master | Exchange 2010
My Blog

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
To my knowledge nothing was added to R2 that would give you the CVE. I think this can be done as a custom solution but it would take a while to do the R&D and write the solution.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

Hi, my MacBook Pro cannot open Safari. nexpectedly while using the librooksbas.dylib plug-in" the report details the exception code as 'EXC_BAD_ACCESS (SIGSEGV)' and exception codes as: 'KERN_INVALID_ADDRESS at 0x0000000920

Hi, my MacBook Pro cannot open Safari. It crashes and gives the message, ' Safari quit unexpectedly while using the librooksbas.dylib plug-in" the report details the exception code as 'EXC_BAD_ACCESS (SIGSEGV)' and exception codes as: 'KERN_INVALID_ADDRESS at 0x0000000920

Remove "Rapport" by following the instructions on this page.
Back up all data before making any changes.

Hi, I bouhgt a used Apple Power Mac G5, I want to buy a blue tooth card for the same to use wireless keyboard and mouse, i am just curious that why do i need to provide the serial number of my computer, is there any compatibilty issue?

Hi, I am new in Apple Computer, I bought a used Power Mac G5. I want to buy a blue tooth card for the same to use wireless keyboard and mouse. so why it is mandatory to provide the serial number of the machine?

Hello, Serial# not needed...
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1

What is the real time use of implicit and explicit cursors in pl/sql

what is the real time use of implicit and explicit cursors in pl/sql.............please tell me

You can check the following link ->
http://www.smart-soft.co.uk/Oracle/oracle-plsql-tutorial-part5.htm
But, i've a question ->
Are you student?
Regards.
Satyaki De.

How do I transfer music from one iPhone to the other without using a laptop and will I be billed?

How do I transfer music from one iPhone to the other without using a laptop and will I be billed?

Download Past Purchases
http://support.apple.com/kb/HT2519
Or do you mean this...
Old Phone to New Phone
http://support.apple.com/kb/HT2109
Also...
It should be Noted that anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID

What is the concept behind using table PA0002 and structure p0002.

Hi,
What is the concept behind using table PA0002 and structure p0002.
Many times, I have seen Looping at structure e.g. p0002, p0006 etc. and data is processed and also seen Looping at table PA0002, PA0006 etc. with further appropriate subtypes if any to retrieve a value and process the same.
In which context tables like PA,HRP,IT etc. are used and structures p0001,p0002 etc. are used.
Regards,
Ameet

HI,
As mentioned that that Structure Pnnnn is user as a internal tablw when a LDB is used.
Ex.
TABLES: PERNR.
INFOTYPES: 0001.
GET PERNR.
    PROVIDE * FROM P0001 BETWEEN PN-BEGDA AND PN-ENDDA.
    WRITE: / P0001-PERNR,
              P0001-STELL,
              P0001-BEGDA,
              P0001-ENDDA.
    ENDPROVIDE.
Here it is important to declare the infotypes you want to read and so the system will create internal tables ex. P0001.
Tables PA0001 are database table with following fields
MANDT
.INCLUDE PAKEY
.INCLUDE PSHD1
.INCLUDE   PS nnnn
Thanks,
Poonam.

Trying to record the school band using Garage band and a Pevey PV14 USB. Have connected the mixer to the Mac using a standard USB lead (is that a problem) but after enabling multitrack option we get the error message

Trying to record the school band using Garage band and a Pevey PV14 USB. Have connected the mixer to the Mac using a standard USB lead (is that a problem) but after enabling multitrack option we get the error message
'Can't enable track for recording. Input channel already in use.'
What are we doing wrong?
Thanks

skim this tutorial:
http://www.bulletsandbones.com/GB/Tutorials.html#bsqrecordmultipletracks
(Let the page FULLY load. The link to your answer is at the top of your screen)

I have dell xps it runs at 3840 x 2167 and bridge lightroom and photoshop are unusable as the type is so small if win is re scaled to a low res the products still use full res and you canot see text can you help!

I am about to buy the above products for home and a laptop I bought the high res laptop for editing photos and the photos look great on the display but I cannot use photo shop and lightroom
has any body had this problem and is there a simple fix that I have missed
taking the res down in the control panel reduces the res but does not effect the programme
by the way the dell xps is great
dave

Thanks for the info I know that there were problems with the high res
I am using the latest photoshop and bridge from the cloud but only using the trial copy at the
moment
I will look closer and try to scale it to a suitable level
thanks dave
Original message----
From : [email protected]
Date : 06/02/2015 - 00:39 (GMTST)
To : [email protected]
Subject : i have dell xps it runs at 3840 x 2167 and bridge lightroom and photoshop are unusable as the type is so small if win is re scaled to a low res the products still use full res and you canot see text can you help!
    i have dell xps it runs at 3840 x 2167 and bridge lightroom and photoshop are unusable as the type is so small if win is re scaled to a low res the products still use full res and you canot see text can you help!
    created by gener7 in Photoshop General Discussion - View the full discussion
There is that pitfall in buying HiDpi laptops for Windows.
Only Photoshop CC 2014 has the option to scale the UI 200% in order to make it usable on these hires screens.
CC and earlier does not have this and Adobe would have to retrofit them. Not likely with older products.
Gene
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7167666#7167666 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7167666#7167666
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

What is the error? Are you following the Bootcamp instructions? Where on the "internet" are you trying to install from? Did you try downloading from here http://www.apple.com/support/bootcamp/downloads/?

Outlook 14.3.8 not responding on MAC using Office 2011 and the pinwheel comes up OS X 10.8.5 ?? Ours seem to be doing it ever 5 minutes or so.

Outlook 14.3.8 not responding on MAC using Office 2011 and the pinwheel comes up OS X 10.8.5 ?? Ours seem to be doing it ever 5 minutes or so.

Outlook 14.3.8 not responding on MAC using Office 2011 and the pinwheel comes up OS X 10.8.5 ?? Ours seem to be doing it ever 5 minutes or so.

Hey there i downloaded apps using another apple id than the one am using right now and i need to update the apps they keep asking me for the old one that i dont have any more what to do please

Hey there i downloaded apps using another apple id than the one am using right now and i need to update the apps they keep asking me for the old one that i dont have any more what to do please

Apps are permanently tied to the ID used to purchase them.
Go to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and re-set th password for the old one.
Then, log into the app store with it and update the apps purchased with that ID.

HT201240 I forgot my administator password for settings so i cant do pretty much anything and when i go to download something on safari then it says you dont have the permission to use this application and then it says for more imformation contact account

I forgot my administator password for settings so i cant do pretty much anything and when i go to download something on safari then it says you dont have the permission to use this application and then it says for more imformation contact account creator

Hello valertinker,
You may want to contact our Account Security team if you're concerned about the security of your Apple ID.
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Allen

What is the difference between MacBook pro 2011 and 2012

What is the difference between MacBook pro 2011 and 2012

understanding that at the time of the question, there has not been any Macbook Pro 2012, now it is later and there is.
The difference is:
-CPU being used (2011 models: Sandy Bridge, 2012 models: Ivy Bridge)
-Graphics (2011: intel 3000 + on 15"/17" ATI, 2012: intel 4000 + on 5"/17" nvidia Geforce 650M)
-USB (2011: USB2.0 only, 2012: USB3.0)
-Bluetooth (2011. 2.1 + EDR, 2012: 4.0)
Ivy Bridge CPUs are smaller and are a little bit more energy-efficient.
Other than that, currently the devices are not much different in respect to performance (Apple's graphics driver performance is known to increase during upgrades, though, so the performance gap may widen up)

How to add a report into the SAP-SCRIPT .using PERFORM ......ENDPERFORM

My question is that How to add a report into the SAP-SCRIPT .
by using PERFORM ......ENDPERFORM
I don't know how to used it .

Hi Sandeep,
Please check this link
http://help.sap.com/saphelp_40b/helpdata/en/d1/803279454211d189710000e8322d00/content.htm
http://www.allinterview.com/showanswers/37425.html
Calling ABAP Subroutines: PERFORM
You can use the PERFORM command to call an ABAP subroutine (form) from any program, subject to the normal ABAP runtime authorization checking. You can use such calls to subroutines for carrying out calculations, for obtaining data from the database that is needed at display or print time, for formatting data, and so on.
PERFORM commands, like all control commands, are executed when a document is formatted for display or printing. Communication between a subroutine that you call and the document is by way of symbols whose values are set in the subroutine.
Syntax in a form window:
/: PERFORM <form> IN PROGRAM <prog>
/: USING &INVAR1&
/: USING &INVAR2&
/: CHANGING &OUTVAR1&
/: CHANGING &OUTVAR2&
/: ENDPERFORM
INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
The ABAP subroutine called via the command line stated above must be defined in the ABAP report prog as follows:
FORM <form> TABLES IN_TAB STRUCTURE ITCSY
OUT_TAB STRUCTURE ITCSY.
ENDFORM.
The values of the SAPscript symbols passed with /: USING... are now stored in the internal table IN_TAB . Note that the system passes the values as character string to the subroutine, since the field Feld VALUE in structure ITCSY has the domain TDSYMVALUE (CHAR 80). See the example below on how to access the variables.
The internal table OUT_TAB contains names and values of the CHANGING parameters in the PERFORM statement. These parameters are local text symbols, that is, character fields. See the example below on how to return the variables within the subroutine.
From within a SAPscript form, a subroutine GET_BARCODE in the ABAP program QCJPERFO is called. Then the simple barcode contained there (u2018First pageu2019, u2018Next pageu2019, u2018Last pageu2019) is printed as local variable symbol.
Definition in the SAPscript form:
/: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
/: USING &PAGE&
/: USING &NEXTPAGE&
/: CHANGING &BARCODE&
/: ENDPERFORM
/ &BARCODE&
Coding of the calling ABAP program:
REPORT QCJPERFO.
FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA: PAGNUM LIKE SY-TABIX, "page number
NEXTPAGE LIKE SY-TABIX. "number of next page
READ TABLE IN_PAR WITH KEY u2018PAGEu2019.
CHECK SY-SUBRC = 0.
PAGNUM = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018NEXTPAGEu2019.
CHECK SY-SUBRC = 0.
NEXTPAGE = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018BARCODEu2019.
CHECK SY-SUBRC = 0.
IF PAGNUM = 1.
OUT_PAR-VALUE = u2018|u2019. "First page
ELSE.
OUT_PAR-VALUE = u2018||u2019. "Next page
ENDIF.
IF NEXTPAGE = 0.
OUT_PAR-VALUE+2 = u2018Lu2019. "Flag: last page
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
Best regards,
raam

Can I create a dynamic report in the server without using a report template

Hi,
My company just bought a Crystal Report Server XI and it didn't have a report designer.
I can't start creating report without the designer.
The question is can I generate a dynamic report at runtime (on the crystal report server ) without using report template?
My project requirement is to use a crystal report server to manage the reports.
Some client web application will just access this report server.
I hope the experts can provide me some guidance.
regards,
Rulix
Edited by: Rulix Batistil on Nov 3, 2008 8:08 AM

Hi Rulix,
The latest version of CR Server is 2008. Therefore I'm assuming you are using CR Server 2008.
New in CR 2008 is the .NET report modification software development kit (SDK). The report application server (RAS) SDK is now available for users of Crystal Reports .NET API without the use of a RAS server. Report modification such as changing, adding, or removing database providers, or adding, removing, or creating report objects, parameters, formulas, and sections can be achieved by accessing the RAS SDK through the Crystal Reports .NET SDK.
Java developers however receive the JRC and Java SDK documentation through the free Crystal Reports for Eclipse download. This product will be updated on a separate schedule from Crystal Reports.
Further Information and samples are available in our [Developer Library|https://www.sdn.sap.com/irj/sdn/businessobjects?rid=/webcontent/uuid/5001d5de-f867-2b10-00bf-8d27683c85a0]
Kind regards,
Tim

Search or Report on the CVE ID using SCUP 2011 and SCCM 2012.

Similar Messages

Maybe you are looking for