Search path if know the SPRO T.code???

Dear Expert
In SAP Menu bar , if i know the t.code e.g. VA01 but if i don't know the path i can find out the path by using the T.code [SEARCH_SAP_MENU]
BUT
If i know the SPRO T.code e.g. OBD2 or any other , and if i don't know the path so ..... in this case like above t.code is there any T.code available where i can find the path or any other method or technique available to find the path of any SPRO T.code
Thanks in advance

Execute SPRO. Now from top menu bar, Additional Information => Additional Information => Display Key => IMG Activity.
Now you can see some codes on right side against each IMG text. Normally, the last four characters would be the respective TCode but this is not applicable to all.
thanks
G. Lakshmipathi

Similar Messages

My ipod just adds apps but won't delete any. I can't restore it to its factory settings as I don't know the 4 digit code. Can anyone help please?

My ipod will add apps happily but it won't delete any so they've built up so now I can't add anymore. . I can't take it back to the factory settings because I don't know the 4 digit code. Please can someone help?! xxx

Sorry. You can't get help here. Ask whoever wrote the jailbreak.
You can try putting it in DFU mode (google is your friend), but that's all we can suggest.
Jailbreaking voids your warranty and AppleCare agreement and forfeits all rights to support.

Settings-General-Reset: I am not able to reset as I do not know the restrictions pass code.

When I try to rest in the device by pressing,Sttings > General > Reset > Reset All Settings > Enter Passcode.
I do not know what is my passcode.
Please clarify and rectify

I did restore to Factory default.
It did not work.
Even at 0330 hrs GMT, it shows 6 Failed Passcode Attemts.

How do I get my Adobe products back on new computer after not knowing the keys and codes

I have recently purchased a new Windows 8 computer. My Windows 7 computer went wrong on the motherboard, so I can't get my license keys, product keys and serial numbers for this new computer.

You can find details on how to locate your serial number under your account at http://forums.adobe.com/message/3987968#3987968?promoid=KBHJW.

PATH OF THE SPRO.

If i know the transaction code and i want to know the SPRO path for that transaction ....?

Hi, I have a good solution.
1: find the description from table CUS_IMGACH using "*tcode" in field "IMG activity"
2: find the path using the description
Pls let me know If you still have any puzzle
Best regards
Michael YUAN
86-21-5080-2000, Ext: 11082
Business Systems-ERP dept.
Semiconductor Manufacturing International (Shanghai) Corporation

How to define Containing Project Directory in the TestStand Search Path?

In TestStand Search Path one of the list is "Containing Project Directory". How can I define this?

Legal Engineer -
TestStand does expose the "containing project directory" in the search directories dialog box. It only has meaning for the FindFile API function when the "currentSequenceFile" parameter is set to a project file. I agree that it is confusing in that it does not apply to steps finding code modules. If you unchecks this setting and you reload a workspace, any projects that use relative paths to specify their files may no longer find their files.
In general the suggestion is to leave it checked and ignore it.
Scott Richardson (NI)
Scott Richardson
National Instruments

SAP Trans.Code related to know the Inventory of previous for more than 5 yr

I want to know the SAP transaction code of inventory Reports related.I want to know the previous Inventory of more than 5 years from the current financial year vide G/L code and part wise.
Regards

Hi P K ,
IF you want report for previous period by G/L account and part code wise.. then MB5L will not serve your purpose . MB5L will display current balances only ..
Some users save MB5L details every month for future references..
However , you can create a ABAP program which will work like MB5L but will pull data of previous period ( date selection will be there).
My client is having such custom report..
Regards
Sarada

What exactly is the function of code inspector

Hi,
Pelase let me know the function of code inspector and related transaction with it.
Thanks in advance
Regards
Irfan Hussain

Hi Irfan,
The Code Inspector (transaction code SCI) is a tool for checking Repository objects regarding performance, security, syntax, and adherence to name conventions. You can also determine statistical information or search for certain ABAP words (tokens). In the Code Inspector, you can define inspections that, with the help of check variants, examine certain sets of objects. As the result of an inspection, you receive information messages, warning messages, or error messages on different properties of the examined objects.
You can check the following link for details.
http://help.sap.com/saphelp_erp2004/helpdata/en/56/fd3b87d203064aa925256ff88d931b/frameset.htm
Thanks and Regards,
Ashish.

How to get the partner function code by partner function?

For example, I need to know the partner function code for 'Reported By' and it's 'SLFN0002', How can I get this information by abap code?
Best regards,

Hey Blake,
You can look up CRMC_PARTNER_FT( Db table ) which is used in the above maintainance view...
Use select stmt to populate an internal table.. then use Read Table( which key DESCRIPTION = < Sold to party > and so on...
Just Get an Abaper and things would be easy..
Reward points for usefull posts..
Regards,
Anand

Forte WS6U1 - Search path SunWS_Cache directory needs write permission

Forte 6 U1, needs write permission to search path SunWS_Cache directory.
When I build a file locally checked out from the baseline directory, and the baseline SunWS_Cache directory needs write permission.
Lets say,
/home/zeebra/baseline/util - is the directory where the baseline is.
Having local workarea as /home/user/work/util
The local work has the baseline in search path. But the local -user does not have write permission on baseline/util/SunWS_Cache.
The local compilation goes thro fine, but when linking it just hangs. As soon as I give the write permission to baseline/util/SunWS_Cache, the linking completes.
Is it a bug? Do we have patch already for this problem for Forte6 Update 1?
Thanks!

The SunWS_Cache directory must have write permission. The cache contains state information that must be locked when a compiler is being run, to avoid trashing the state information if another compilation runs in the same directory at the same time. (Sun C++ supports dmake and gmake for running multiple compilations in parallel.)
A non-writeable template cache is not an available option.
Starting with C++ 5.5 (Sun ONE Studio 8 Compiler Collection), the template cache is no longer required, and by default is not used. If you are having problems involving the cache, you should consider upgrading to this new release.

[Help] LabVIEW Search Paths Questions...

Is the "Tools" \ "Options" \ "Paths" \ "Search Paths" stored on the PC that is running LabVIEW or stored in the currently opened VI?
Also can I specify relative search paths for example: "<topvi>\..\..\..\Library\MyLib\*"
Is the search recursive? i.e. If there are subfolders, with subfolders will it drill down looking for the missing VI's?
The issue I have is that I have a project in a directory structure defined by a configuration control program i.e:
Y:\Test Equp\Project\Modules\Library\MyLib\* (there may be one or more sub folders contain VI's).
Y:\Test Equp\Project\Modules\MyApplication\* (there may be one or more sub folders contain VI's).
On the target the structure might be:
C:\Final\Library\MyLib\*
C:\Final\MyApplication\*
The issue is when I copy the files from Y: on my PC to C: on the PXI rack and open the top level VI in "MyApplication", LabVIEW cannot see the files in the "MyLib" until I tell where one VI is in each sub folder in "MyLib". This is a pain, specially if I make changes and transfer the file back to my PC as I have too go through the process again!
If I can spec a search path for the library files then it should just find them on either my PC or the PXI rack...
Thanks
Christopher Povey
Senior Test Systems Engineer for BAE Systems.
Solved!
Go to Solution.

ChristopherPovey wrote:
Is the "Tools" \ "Options" \ "Paths" \ "Search Paths" stored on the PC that is running LabVIEW or stored in the currently opened VI?
It is specific to that PC. It is stored in the labview.ini file.
Also can I specify relative search paths for example: "<topvi>\..\..\..\Library\MyLib\*"
You can, but that's not really the solution to your problem.
Is the search recursive? i.e. If there are subfolders, with subfolders will it drill down looking for the missing VI's?
That's what the asterisk at the end signifies. From the LabVIEW Help:
After you select the directory, LabVIEW inserts the path in the text box to the right of the Browse button. You can edit the path in this text box. When you select a path, LabVIEW normally searches that directory but not its subdirectories. You can make the search hierarchical by appending an asterisk (*) to the new path item. For example, enter LabVIEW/*, LabVIEW\*, or LabVIEW:* to search LabVIEW and its subdirectories.
The issue I have is that I have a project in a directory structure defined by a configuration control program i.e:
Y:\Test Equp\Project\Modules\Library\MyLib\* (there may be one or more sub folders contain VI's).
Y:\Test Equp\Project\Modules\MyApplication\* (there may be one or more sub folders contain VI's).
On the target the structure might be:
C:\Final\Library\MyLib\*
C:\Final\MyApplication\*
The issue is when I copy the files from Y: on my PC to C: on the PXI rack and open the top level VI in "MyApplication", LabVIEW cannot see the files in the "MyLib" until I tell where one VI is in each sub folder in "MyLib". This is a pain, specially if I make changes and transfer the file back to my PC as I have too go through the process again!
If I can spec a search path for the library files then it should just find them on either my PC or the PXI rack...
Thanks
The location of subVIs is saved with a VI, and it's a relative path. Since you are moving both directories there shouldn't be an issue finding the subVIs when you open the top-level VI, so it's not clear why there's an issue here. Are you loading VIs dynamically?

Removal of SPRO t-code

Hi
I was still trying to finalize the SPRO settings.
I am facing one more difficulty:
I have created a scope, assigned a view and generated them using SPRO_ADMIN.
Then, we have created a role and from the cust. authorizations. The menu automatically pulling the
SPRO t-code along with the others.
How to remove the SPRO t-code from this role ?? Bcz. instead of SPRO we have a requirement of
giving the ZSPRO(customized transaction created) in this role created from the project.
Thanks for helping.
Ramakrishna

Hi,
In fact, i tried to right click on the t-code wherein i couldn't find any delete option.
Are u sure that the right click will give delete option.\
If we can remove this from the menu , and add ZSPRO to the menu or S_TCODE then we can easily restrict the views of the user when types ZSPRO.
Ramakrishna.

Search Path Field Height

We have a large LV developer user base and our users are getting confused by the limitations on the search path fields. The lowercase q really looks like a q (see below), any ideas on how to change this to make it more clear?
Thanks!
Using LabVIEW2012 32bit

Ironically, in your message both characters "lowercase g and looks like a q" they both look the same. I understand, looking at the image that you are saying lowercase G and lowercase Q look the same, apparently because the field height clips the image?
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

How to create search path for the file on the desktop..

hello experts..
      I have used gui_upload module to upload the data from flatfile to the internal table, in that how can i create search path for the file selection in the selection screen, also please help me the code to update the ztable.
thanks

HI
If iam not wrong you want to select a file from a location that you don't know so if this is ur problem then use the function module
F4_FILENAME
this FM helps to locate and select the desired file from the system.
Sample code that you can check is
How to get windows filename
PARAMETERS: lv_file LIKE rlgrap-filename.
Method 1
    CALL FUNCTION u2019KD_GET_FILENAME_ON_F4u2019
    EXPORTING
    MASK = u2019,.txt,.*u2019
    STATIC = u2019Xu2019
    CHANGING
    FILE_NAME = LV_FILE.
Method 2
CALL FUNCTION u2019F4_FILENAMEu2019
EXPORTING
         program_name = syst-cprog
         dynpro_number = syst-dynnr
         field_name = u2019 u2019
     IMPORTING
         file_name   = LV_FILE.
Regards
Pavan

Is there any way to know the T-code from the screen?

Hi friemds,
it s a general question. but I found relavant for posting here.
I saw our group friens giving some T-codes for spro functions (eg: SNRO, M/06), bbut how to know the transaction from path. i.e. If I go to condition types screen, there I could not see any transaction. is there any way to know the T-code from the screen?

Hi,
Listed here are the various ways you can find the list of transaction codes and their usage:
Use transaction SE11 - ABAP Dictionary:
Fill in the Database table name and click the Display button.
- TSTC table will contain all the Tcodes and
- TSTCT table will contain all the Tcodes with Texts.
Once you entered the screen, click in Top Menu - Utilities - Table contents - Display
If you want to display all the transaction code (total - 57,048) you have to change the Fields: Maximum number of hits to 99999 (default 500).
or
Simply goto transaction SM01, although this tcode is to Lock/Unlock any transaction code, you can also view all the tcode available in the R/3 system from here.
or
Goto transaction SE93
There are two ways where you can find the list of transaction codes in SE93.
Method 1:
You must be familiar with the starting characters strings for each of the R/3 application modules.
Assuming you know that most Materials Management transaction codes start with MM.
In the Fields: Transaction code, type in MM* and press the function key F4
The list of transaction code starting with MM will be displayed.
Method 2:
On the Top Menu, click Utilities - Find - Execute and the first 500 transaction will be display.
If want to display all the tcodes, make sure you remembered to change the Fields: Maximum no. of hits right at the bottom of the screen.
I know a particular T Code and can enter and work on it. How do I know what is the menu path for that T Code?
Enter Search_SAP_Menu in the command box and when the pop box appears enter, the Tcode and it will give the nodes and menu path.
This is helpful only in case of SAP Menu not in case of SPRO - ie IMG.....
Reward if Helpful,
Regards,
Archit.

Search path if know the SPRO T.code???

Similar Messages

Maybe you are looking for