SearchCatalogAvailabilityMonitor showing unhealthy for all database on DAG member mailbox server

Hi All
Help me to resolve server (all database) search catalogue availability monitor.
I am facing a search catalogue "Unknown" issue for newly created copy database and also on same mailbox server
"SearchCatalogAvailabilityMonitor" showing unhealthy for all database.
For the newly created copy database I tried to reseed / update search index catalogue by using below PowerShell command but it stopped with below mentioned error.
[PS] C:\Windows\system32>Update-MailboxDatabaseCopy -Identity DBTest\MBX1 -CatalogOnly
Confirm
Are you sure you want to perform this action?
Seeding database copy "DBTest\MBX1".
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"): y
Confirm
The mailbox database copy 'DBTest\MBX1' has failed to update from server . Do you want to clean up that update
request now? Seeding cannot be requested for the same database copy until the failed request has been cleaned up by the
server, which should automatically happen within 15 minutes.
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"): y
WARNING: Seeding of content index catalog for database 'DBTest' failed. Please verify that the Microsoft Search
(Exchange) and the Host Controller service for Exchange services are running and try the operation again. Error: There
was no endpoint listening at
net.tcp://localhost:3863/Management/SeedingAgent-64310690-DEA4-47E1-9860-E8B2AC4E292A12/Single that could accept the
message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more
details..
[PS] C:\Windows\system32>Get-MailboxDatabaseCopyStatus -Identity DBTest
Name
Status          CopyQueue ReplayQueue LastInspectedLogTime   ContentIndex
              Length    Length
State
DBTest\MBX2                              Mounted
0        0                                  Healthy
DBTest\MBX1                              Healthy
0         0           2/8/2015 3:09:49 PM    Unknown
DBTest\DRMBX1                            Healthy
0         0           2/8/2015 3:09:49 PM    Healthy
Same time
Result of get-serverhealth -server MBX1, also please note all database (Copy) search is in unhealthy condition and newly created copydatabase have no entry for "SearchCatalogAvailabilityMonitor".
Name
TargetResource
HealthSetName
AlertValue
SearchCatalogAvailabilityMonitor
DB01
Search
Unhealthy
SearchCatalogAvailabilityMonitor
DB06
Search
Unhealthy
Reg
Aditya

Hi Deepak
My both exchange servers on hyper V and there should not be resource problems.
However I have already rebooted server. but it wont help.
Mean while I get success to make search component healthy on my problematic server by below command but still content index folder is not coming automatically.
[PS] C:\Program Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\Installer>.\installconfig.ps1 -action I –dataFolder "C:\program files\Microsoft\Exchange Server\V15\bin\search\ceres\hostcontroller\data"
Configuring Search Foundation for Exchange....
Successfully configured Search Foundation for Exchange
By running this command these are in health state now.
Name
TargetResource
HealthSetName
AlertValue
SearchCatalogAvailabilityMonitor
DB01
Search
healthy
SearchCatalogAvailabilityMonitor
DB06
Search
healthy
Reg
Aditya

Similar Messages

How do I get itunes to show BPM for all songs?

how do I get itunes to show BPM for all songs?

McChris,
The BPM field can be viewed, but it is almost always empty unless you have taken steps to populate it.
You can use a 3rd party tool to perform BPM detection and add it to your iTunes database:
http://www.beatunes.com/itunes-automatic-bpm-detection.html

Calculate result as average in the report not showing average for all

Hello,
I have a calculated key figure in the query where its result should show average. I have made a setting for this calculated key figure as:
1. Calculations tab: Calculate result as "average" and calculate single value as "nothing defined"
2. Aggreagation tab: exception aggregation: Total and reference char: []
Now coming to report, BEX it showing correct average for all cells but when i run it in portal few values it is showing correct average but for few it is showing as blank. I exported this to excel then cell shows blank but cell has some values in the custom format and display values when i change the format to general from "format cells" option.
Please help me in resolving the issue- why portal not showing value for all.
Thanks,
Vijaya

SAP note solved the purpose.
Thanks & Regards,
Vijaya

Help fix my function to show status for all folders

I have created a function (tow of them for the same purpose) but they are not working. They compile but when i call them I get null result.
What I want to do is get folder status for all folders in the database. There is a table called folder with status code, and another table called validstatus with the statuscode description
So when you look at the older you just see the status code which is a number but then using the function you will get the desription of what that code means.
Here IS THE function. Maybe I am not doing it right when I call them.
CREATE OR REPLACE FUNCTION f_folderstatus (v_folderrsn IN NUMBER)
RETURN VARCHAR2
IS
v_return VARCHAR2 (128);
BEGIN
SELECT distinct vs.statusdesc
into v_return
FROM folder f, validstatus vs
WHERE f.statuscode = vs.statuscode
AND f.folderrsn = v_folderrsn;
RETURN v_return;
END;
When I call them using this statement I get null
select f.folderrsn, f_folderstatus3(vs.statusdesc)
from FOLDER F, validstatus vs
where f.statuscode = vs.statuscode
Edited by: user9508421 on Sep 11, 2008 8:11 AM

Now how do I create a function to give folder status for all foldertypes? I will then use this function in a package.
The Folder table has the following columns:
NAME Null? Type
FOLDERRSN NOT NULL NUMBER(10,0)
FOLDERTYPE NOT NULL VARCHAR2(4)
STATUSCODE NUMBER(10,0)
SUBCODE NUMBER(10,0)
FOLDERDESCRIPTION VARCHAR2(4000)
FOLDERCONDITION VARCHAR2(4000)
FOLDERNAME VARCHAR2(80)
The validstatus table has these columns:
NAME Null? Type
STATUSCODE NUMBER(10,0)
STATUSDESC VARCHAR2(80)

Can I create x1 CR layout for all databases

Hi
Is it possible to have x1 Crystal Report Layout for x17 Databases with different Logos (Logos are based off the databases), a little detail:
We have x17 databases on the same SQL Server, I have created a Crystal Report which can be used for all companies / databases but I am wanting to know if there is a possibility to have this x1 Crystal Report and everytime you print from the relevant database it pulls that specific company Logo? Is there any Crystal Syntax to create this? especially when the field is labelled "Picture2" and is not a SBO Table & Field.
It seems logical than having x17 Crystal Reports.
Any ideas?
Regards
Kurt Walters

Hi Julie
Thanks for the reply, for your last alternative:
"An alternative is to embed all 17 picture files into your layout, one on top of the other, and conditionally suppress each one based on the database name"
I tried this with an If statement based off Company Name on the OADM table but was having issue with the If Statement (Format Editor > (X+2) Button next to Supress > Format Formula Editor - Suppress).
I will give the Print Preferences a Go but will it be possible with a If statement?
Regards
Kurt Walters

Set RMAN catalog default setting for all databases

Hi,
I am running a 11gR1 RMAN catalog.
I am wondering if is it possible to change a default configuration setting in the RMAN catalog so that all the new databases will inherit it.
For example, I would like all the new databases registered to the catalog to have:
BACKUP OPTIMIZATION ON
RETENTION POLICY TO REDUNDANCY 7
Thanks,
massi

No, the catalog cannot "dictate" configurations for databases. Each database retains configuration in the controlfile and this can be updated only by an rman connection (i.e. rman connecting to the database as a target). The CONFIGURE command in rman is used to set a "permanent" configuration parameter for a database but must be issued for each database individually.
Hemant K Chitale

Checkboxes in BI Publisher not showing up for all reports

Hi everyone,
I followed the instructions (uploading fonts, checking the checkbox font property e.t.c) for displaying checkboxes (without the diamond shape) in my BI Publisher reports. It worked for 1 report and still does. Unfortunately the new reports I have uploaded still display the diamond shape. I find this very odd even though followed exactly the same process for all of my reports.
Is there a way to make sure that checkboxes display properly for all reports? Could there be a mistake I have made and that I am missing out on. Any thoughts will be appreciated.

Have you set the properties as per
http://blogs.oracle.com/xmlpublisher/2007/05/wherere_my_checkboxes.html
especially
1. The font location, we need to tell the publisher engine where the Wingdings font is located:
<font family="Wingdings" style="normal" weight="normal">
<truetype path="c:\windows\fonts\wingding.ttf"/>
</font>
2. The glyphs to be used. Here we specify the font family name ie 'Wingdings' and the 253/254 glyphs
<property name="rtf-checkbox-glyph">Wingdings;253;254</property>
Do ensure that you use the same glyph character codes defined in ur config and RTF

Block all websites apart from the homepage for all users. Citrix environment with Server 2003.

Citrix Xenapp 5 and Windows server 2003 environment. We want to force Firefox to kiosk mode with a pre-set homepage for all users. I also want to lock this to only one website. I have managed to set up the kiosk mode with R-Kiosk addon and Mozilla.cfg file. I am trying to use BlockSites to block all internet sites and only allow the one site with the whitelist option. I can get the addon to install for all users, but can’t get the default settings across. I have tried to add this with the Mozilla.cfg file, but it looks like this addon is getting it’s settings from the profile folder. If I set the preferences for the addon in Mozilla,cfg file, it actually picks it up but it doesn’t apply it to the addon for some reason. Does anyone have any other ideas on how I can lock this down to the one site?

I am not entirely sure how to do this, but the enterprise community would be a good place to ask. They have a email group you can ask on this page: [https://www.mozilla.org/en-US/firefox/organizations/faq/]

Eu_role not showing up for all users in EP7

Hi SDN,
I have newly deployed EP7, I want all users to have EU_Role but but its not showing up even though i have added eu_role to everyone group.
i do see eveyone group attched to all users but it does not show up eu_role to it.
Am i missing anything in EP7 Configuration.
Thanks
DK

Hi,
Go to everyone group and click the tab 'assign role'
Search for the eu_role recursively(check the box recursive before search). otherwise all roles will not show up.
Hope that helps you
Raghu

Missed Calls showing up for all lines

We have users complaining that they are seeing missed calls from all lines on their phone and not just their own line. Is there any way to change it so that the missed calls are only for line 1 on the phone?

Mike,
The new 8.0.3 code for the 7961 and 7941 support line associations for the missed, placed and received calls. The calls will still show up but they will be able to determine what line the call was for. They just click a detail softkey to get additional information.
http://www.cisco.com/en/US/products/hw/phones/ps379/prod_release_note09186a008068f380.html#wp40897
Looks like it's kinda a hodgepodge on which phones have this new feature and don't so you should hit the phone release notes to determine this.
http://www.cisco.com/en/US/products/hw/phones/ps379/prod_release_notes_list.html
Please rate any helpful posts
Thanks
Fred

Blue Lego with question mark showing up for all my attachments and images

Something happened. I don't know if it was from installing the new Adobe flash. Now all my jpegs, pngs, file attachments show up as blue legos with a ?. But stuff form Amazon, eBay have images showing. same goes for jpegs sent to me from friends. what happened?

I have been experiencing the same issues. So far, I have tried:
1. Uninstall Flash with the Uninstaller supplied on Adobe's website. Reinstall Flash. _Did not work_.
2. Uninstall Flash with the Uninstaller supplied on Adobe's website. Delete the ~/Library/Preferences/com.apple.quicktime.plugin.preferences.plist. Reinstall Flash. _Did not work_.
3. The suggestions posted on MacFixIt at: http://www.macfixit.com/article.php?story=20071204103141963. _Did not work_. In fact, on my Mac there is not a "application/x-shockwave-flash" entry shown under "WebPluginMIMETypes." It might be that it should be there, but its not. If its needed, I don't know how to get it there. Even reinstalls of Flash Player don't put it there. (I did not try fix #3 because I don't want to break Quicktime).
Basically, I have tried everything I can find and still am not able to fix this issue in Safari. It works ok in Firefox, but not always. Sometimes I get a blank box or two in Firefox where a picture should be. I especially have this issue when using Facebook.
Seem like many others are running into these issues. I really wish Apple and Adobe would get their act together on things. I am fairly new to Macs and I'm beginning to believe with all the quirks and bugs that Apple has shown me since I've been running Leopard, that Macs are not really much better than PCs. The user experience is better, but in terms of stability, not much better.
If anyone has any other suggestions, I'm all ears.
iMac Aluminum
Mac OS X 10.5
Safari 3.0.4 (5523.10.6)
Message was edited by: KensethFan
Message was edited by: KensethFan

My favicons are not showing up for all my imported bookmarks as well as certain current bookmarks and when I open the about:config it says "browser.chrome.favicons;false". Shouldn't this be true and how to I change it?

I had to rebuild my computer and when I imported all of my bookmarks they had no favicons. I started getting some of the favicons when I would go to the websight it would reconnect, but now I can't seem to see almost any of them. I did a search on Google and one tech site suggested the about:config file and that the "browser.chrome.favicons;false" should be set to true. But when I toggle it to true and restart Firefox it is once more set to false. I know it doesn't seem like much, but it is really annoying not having those favicons.
Help me Obi Wan Firefox you are my only hope.

The browser.chrome.favicons preference should be set to true, as it is not retaining the value when you restart Firefox, see the [[Preferences are not saved]] article for possible causes.

Can we implement the functionality similar to ROW_NUMBER() in generic/common way for all databases using SQL ?

In my project,i am allowing user to select database of his choice from given options & i need to write queries considering
all these optional databases. So as per my one of requirement,is there any way to achieve generic functionality similar to ROW_NUMBER() in MSSQL ?

First run this and check the db version
SELECT @@VERSION
EXEC sp_dbcmptlevel 'db name'
If version is above 2012 and compatibility level is above 80 ROW_NUMBER will work.
Otherwise you need to use this
http://sqlserverplanet.com/sql-2000/simulate-row_number-in-sql-2000
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

PSE 7: Hand tool shows up for all tools

Using PSE 7 and have used prior versions and CS2 but never saw this before.
Trying to crop after entering the sizes and the hand tool appears instead of the crop box. Then, when I try others like type or brush, there is only the hand tool so these can't be used either.
Restarted PSE, clicked on the hand tool hoping it was a toggle. Nothing works.
Any suggestions?
Thanks.

Check under Image>Mode to be sure there's nothing funky going on. Also, are these photos on your hard drive?
If all that is okay, try deleting prefs:
Quit the editor then restart it while holding down ctrl+alt+shift. Keep holding the keys till you see a window asking if you want to delete the settings. You do.

Audit browser showing complete for all process flows.

Hi,
My process flows are executing success fully.
Based upon the activities I am ending the process with END_SUCCESS, END_ERROR or END_WARNING acitivities.
But here even, the process flow is ended up with END_ERROR activitiy the process flow status is shown as 'Complete'. But its not showing the final status as "Error".
In the backend, in the audit tables its showing the return status as "Failure"
Could any one please explain me, how to show its status as fialure.
Thank you,
Regards,
Gowtham Sen.

Hi,
From your description, I know you do not want to close your browser when users sign out SharePoint 2013.
As you know, “the browser has to terminate the session and clear the cache.” You can customize your sign out page by referring to this article: https://controlzet.wordpress.com/2014/02/17/sharepoint-custom-sign-out-page/.
Best Regards
Vincent Han
TechNet Community Support

SearchCatalogAvailabilityMonitor showing unhealthy for all database on DAG member mailbox server

Similar Messages

Maybe you are looking for